2023-03-07 20:32:57

by Bjorn Helgaas

[permalink] [raw]
Subject: [PATCH] nvme-pci: drop redundant pci_enable_pcie_error_reporting()

From: Bjorn Helgaas <[email protected]>

pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.

Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.

Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.

Signed-off-by: Bjorn Helgaas <[email protected]>
---
drivers/nvme/host/pci.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 5b95c94ee40f..593f86323e25 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -5,7 +5,6 @@
*/

#include <linux/acpi.h>
-#include <linux/aer.h>
#include <linux/async.h>
#include <linux/blkdev.h>
#include <linux/blk-mq.h>
@@ -2535,7 +2534,6 @@ static int nvme_pci_enable(struct nvme_dev *dev)

nvme_map_cmb(dev);

- pci_enable_pcie_error_reporting(pdev);
pci_save_state(pdev);

result = nvme_pci_configure_admin_queue(dev);
@@ -2600,10 +2598,8 @@ static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown)
nvme_suspend_io_queues(dev);
nvme_suspend_queue(dev, 0);
pci_free_irq_vectors(pdev);
- if (pci_is_enabled(pdev)) {
- pci_disable_pcie_error_reporting(pdev);
+ if (pci_is_enabled(pdev))
pci_disable_device(pdev);
- }
nvme_reap_pending_cqes(dev);

nvme_cancel_tagset(&dev->ctrl);
--
2.25.1



2023-03-09 00:27:36

by Chaitanya Kulkarni

[permalink] [raw]
Subject: Re: [PATCH] nvme-pci: drop redundant pci_enable_pcie_error_reporting()

On 3/7/23 12:32, Bjorn Helgaas wrote:

> From: Bjorn Helgaas <[email protected]>
>
> pci_enable_pcie_error_reporting() enables the device to send ERR_*
> Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
> native"), the PCI core does this for all devices during enumeration, so the
> driver doesn't need to do it itself.
>
> Remove the redundant pci_enable_pcie_error_reporting() call from the
> driver. Also remove the corresponding pci_disable_pcie_error_reporting()
> from the driver .remove() path.
>
> Note that this only controls ERR_* Messages from the device. An ERR_*
> Message may cause the Root Port to generate an interrupt, depending on the
> AER Root Error Command register managed by the AER service driver.
>
> Signed-off-by: Bjorn Helgaas <[email protected]>
> ---

Indeed it is moved to pci_aer_init(), and will get called
from :-
pci_scan_single_device()
pci_device_add()
pci_init_capabalities()
pci_aer_init()

Reviewed-by: Chaitanya Kulkarni <[email protected]>

-ck