The DCP block is present on 6sll and 6ull but not enabled. The hardware is
mostly compatible with 6sl, the only important difference is that explicit
clock enabling is required.
There were several issues with the functionality of this driver (it didn't
even probe properly) but they are fixed in cryptodev/master by this series:
https://lore.kernel.org/patchwork/cover/994874/
---
Changes since v1:
* Add devicetree maintainers for dt-bindings
* Add a patch enabling in imx_v6_v7_defconfig. Since tcrypt now passes this
shouldn't cause any issues
* Link to v1: https://lore.kernel.org/patchwork/cover/994893/
Leonard Crestez (4):
dt-bindings: crypto: Mention clocks for mxs-dcp
crypto: mxs-dcp - Add support for dcp clk
ARM: dts: imx6ull: Add dcp node
ARM: imx_v6_v7_defconfig: Enable CRYPTO_DEV_MXS_DCP
.../devicetree/bindings/crypto/fsl-dcp.txt | 2 ++
arch/arm/boot/dts/imx6ull.dtsi | 10 ++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
drivers/crypto/mxs-dcp.c | 18 ++++++++++++++++++
4 files changed, 31 insertions(+)
--
2.17.1
On 6ull and 6sll the DCP block has a clock which needs to be explicitly
enabled.
Add minimal handling for this at probe/remove time.
Signed-off-by: Leonard Crestez <[email protected]>
---
drivers/crypto/mxs-dcp.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index 849a81ece079..fd13787a2a0e 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -18,10 +18,11 @@
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/stmp_device.h>
+#include <linux/clk.h>
#include <crypto/aes.h>
#include <crypto/sha.h>
#include <crypto/internal/hash.h>
#include <crypto/internal/skcipher.h>
@@ -80,10 +81,11 @@ struct dcp {
struct completion completion[DCP_MAX_CHANS];
spinlock_t lock[DCP_MAX_CHANS];
struct task_struct *thread[DCP_MAX_CHANS];
struct crypto_queue queue[DCP_MAX_CHANS];
+ struct clk *dcp_clk;
};
enum dcp_chan {
DCP_CHAN_HASH_SHA = 0,
DCP_CHAN_CRYPTO = 2,
@@ -1027,10 +1029,24 @@ static int mxs_dcp_probe(struct platform_device *pdev)
sdcp->dev = dev;
sdcp->base = devm_ioremap_resource(dev, iores);
if (IS_ERR(sdcp->base))
return PTR_ERR(sdcp->base);
+ /* DCP clock is optional, only used on some SOCs */
+ sdcp->dcp_clk = devm_clk_get(dev, "dcp");
+ if (IS_ERR(sdcp->dcp_clk)) {
+ if (sdcp->dcp_clk != ERR_PTR(-ENOENT))
+ return PTR_ERR(sdcp->dcp_clk);
+ sdcp->dcp_clk = NULL;
+ }
+
+ ret = clk_prepare(sdcp->dcp_clk);
+ if (ret)
+ return ret;
+ ret = clk_enable(sdcp->dcp_clk);
+ if (ret)
+ return ret;
ret = devm_request_irq(dev, dcp_vmi_irq, mxs_dcp_irq, 0,
"dcp-vmi-irq", sdcp);
if (ret) {
dev_err(dev, "Failed to claim DCP VMI IRQ!\n");
@@ -1168,10 +1184,12 @@ static int mxs_dcp_remove(struct platform_device *pdev)
crypto_unregister_algs(dcp_aes_algs, ARRAY_SIZE(dcp_aes_algs));
kthread_stop(sdcp->thread[DCP_CHAN_HASH_SHA]);
kthread_stop(sdcp->thread[DCP_CHAN_CRYPTO]);
+ clk_disable(sdcp->dcp_clk);
+
platform_set_drvdata(pdev, NULL);
global_sdcp = NULL;
return 0;
--
2.17.1
The DCP block on 6ull has no major differences other than requiring
explicit clock enabling.
Signed-off-by: Leonard Crestez <[email protected]>
---
arch/arm/boot/dts/imx6ull.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index 796ed35d4ac9..be610339e933 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -37,10 +37,20 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0x02200000 0x100000>;
ranges;
+ dcp: dcp@2280000 {
+ compatible = "fsl,imx6ull-dcp", "fsl,imx28-dcp";
+ reg = <0x02280000 0x4000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6ULL_CLK_DCP_CLK>;
+ clock-names = "dcp";
+ };
+
iomuxc_snvs: iomuxc-snvs@2290000 {
compatible = "fsl,imx6ull-iomuxc-snvs";
reg = <0x02290000 0x4000>;
};
--
2.17.1
This block is present in 6sl, 6sll and 6ull so it should be enabled in
the default imx kernel config.
Signed-off-by: Leonard Crestez <[email protected]>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 1ad5736c8fa6..57928dff9bce 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -428,10 +428,11 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
CONFIG_SECURITYFS=y
CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_DEV_SAHARA=y
+CONFIG_CRYPTO_DEV_MXS_DCP=y
CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_FONTS=y
--
2.17.1
Explicit clock enabling is required on 6sll and 6ull so mention that
standard clock bindings are used.
Signed-off-by: Leonard Crestez <[email protected]>
---
Documentation/devicetree/bindings/crypto/fsl-dcp.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
index 76a0b4e80e83..4e4d387e38a5 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
@@ -4,10 +4,12 @@ Required properties:
- compatible : Should be "fsl,<soc>-dcp"
- reg : Should contain MXS DCP registers location and length
- interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ
must be supplied, optionally Secure IRQ can be present, but
is currently not implemented and not used.
+- clocks : Clock reference (only required on some SOCs: 6ull and 6sll).
+- clock-names : Must be "dcp".
Example:
dcp@80028000 {
compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
--
2.17.1
On Mon, Oct 15, 2018 at 10:28 AM Leonard Crestez
<[email protected]> wrote:
>
> Explicit clock enabling is required on 6sll and 6ull so mention that
> standard clock bindings are used.
>
> Signed-off-by: Leonard Crestez <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
On Mon, Oct 15, 2018 at 10:28 AM Leonard Crestez
<[email protected]> wrote:
> + /* DCP clock is optional, only used on some SOCs */
> + sdcp->dcp_clk = devm_clk_get(dev, "dcp");
> + if (IS_ERR(sdcp->dcp_clk)) {
> + if (sdcp->dcp_clk != ERR_PTR(-ENOENT))
> + return PTR_ERR(sdcp->dcp_clk);
> + sdcp->dcp_clk = NULL;
> + }
> +
> + ret = clk_prepare(sdcp->dcp_clk);
> + if (ret)
> + return ret;
> + ret = clk_enable(sdcp->dcp_clk);
> + if (ret)
> + return ret;
Couldn't you use clk_prepare_enable() instead?
On Mon, Oct 15, 2018 at 10:28 AM Leonard Crestez
<[email protected]> wrote:
> diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
> index 796ed35d4ac9..be610339e933 100644
> --- a/arch/arm/boot/dts/imx6ull.dtsi
> +++ b/arch/arm/boot/dts/imx6ull.dtsi
> @@ -37,10 +37,20 @@
> #address-cells = <1>;
> #size-cells = <1>;
> reg = <0x02200000 0x100000>;
> ranges;
>
> + dcp: dcp@2280000 {
Node names should be generic, so it would be better to use:
dcp: crypto@2280000 {
On Mon, Oct 15, 2018 at 10:28 AM Leonard Crestez
<[email protected]> wrote:
>
> This block is present in 6sl, 6sll and 6ull so it should be enabled in
> the default imx kernel config.
>
> Signed-off-by: Leonard Crestez <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Hi Leonard,
> -----Original Message-----
> From: Leonard Crestez
> Sent: Monday, October 15, 2018 9:28 PM
[...]
> Subject: [PATCH v2 0/4] Port mxs-dcp to imx6ull and imx6sll
>
> The DCP block is present on 6sll and 6ull but not enabled. The hardware is
> mostly compatible with 6sl, the only important difference is that explicit clock
> enabling is required.
>
> There were several issues with the functionality of this driver (it didn't even
> probe properly) but they are fixed in cryptodev/master by this series:
> https://lore.kernel.org/patchwork/cover/994874/
>
Thanks for the work.
I will be glad to help the test if you provide some test guides. :-)
Regards
Dong Aisheng
> ---
> Changes since v1:
> * Add devicetree maintainers for dt-bindings
> * Add a patch enabling in imx_v6_v7_defconfig. Since tcrypt now passes this
> shouldn't cause any issues
> * Link to v1: https://lore.kernel.org/patchwork/cover/994893/
>
> Leonard Crestez (4):
> dt-bindings: crypto: Mention clocks for mxs-dcp
> crypto: mxs-dcp - Add support for dcp clk
> ARM: dts: imx6ull: Add dcp node
> ARM: imx_v6_v7_defconfig: Enable CRYPTO_DEV_MXS_DCP
>
> .../devicetree/bindings/crypto/fsl-dcp.txt | 2 ++
> arch/arm/boot/dts/imx6ull.dtsi | 10 ++++++++++
> arch/arm/configs/imx_v6_v7_defconfig | 1 +
> drivers/crypto/mxs-dcp.c | 18
> ++++++++++++++++++
> 4 files changed, 31 insertions(+)
>
> --
> 2.17.1