This adds a very basic device tree file for the Samsung Galaxy Express
SGH-I437. Currently, the following things work: UART, eMMC, SD Card, and
USB.
Signed-off-by: Rudraksha Gupta <[email protected]>
---
v2:
- Group the correct changes together
arch/arm/boot/dts/Makefile | 1 +
.../dts/qcom-msm8960-samsung-expressatt.dts | 337 ++++++++++++++++++
2 files changed, 338 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..d55f196ad733 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1049,6 +1049,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8660-surf.dtb \
qcom-msm8916-samsung-serranove.dtb \
qcom-msm8960-cdp.dtb \
+ qcom-msm8960-samsung-expressatt.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
qcom-msm8974-sony-xperia-rhine-amami.dtb \
qcom-msm8974-sony-xperia-rhine-honami.dtb \
diff --git a/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
new file mode 100644
index 000000000000..cf557f0c9a59
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <dt-bindings/input/input.h>
+#include "qcom-msm8960.dtsi"
+
+/ {
+ model = "Samsung Galaxy S3 SGH-I437";
+ compatible = "samsung,expressatt", "qcom,msm8960";
+
+ aliases {
+ serial0 = &gsbi5_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
+ soc {
+ gsbi@16400000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial@16440000 {
+ status = "ok";
+ };
+ };
+
+ amba {
+ /* eMMC */
+ sdcc1: mmc@12400000 {
+ status = "okay";
+ vmmc-supply = <&pm8921_l5>;
+ };
+
+ /* External micro SD card */
+ sdcc3: mmc@12180000 {
+ status = "okay";
+ vmmc-supply = <&pm8921_l6>;
+ vqmmc-supply = <&pm8921_l7>;
+ };
+ };
+
+ rpm@108000 {
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s4>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+ vdd_ncp-supply = <&pm8921_l6>;
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l21_l23_l29-supply = <&pm8921_s8>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+ /* Buck SMPS */
+ pm8921_s1: s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s2: s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ pm8921_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ bias-pull-down;
+ };
+
+ pm8921_s4: s4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+
+ pm8921_s7: s7 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ pm8921_s8: s8 {
+ regulator-always-on;
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* PMOS LDO */
+ pm8921_l1: l1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ bias-pull-down;
+ };
+
+ pm8921_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l3: l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l4: l4 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l5: l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l6: l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l7: l7 {
+ regulator-always-on;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l8: l8 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3100000>;
+ bias-pull-down;
+ };
+
+ pm8921_l9: l9 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+
+ pm8921_l10: l10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l11: l11 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l12: l12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ pm8921_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ pm8921_l16: l16 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ pm8921_l17: l17 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ pm8921_l18: l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ bias-pull-down;
+ };
+
+ pm8921_l21: l21 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ pm8921_l22: l22 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ bias-pull-down;
+ };
+
+ pm8921_l23: l23 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ pm8921_l24: l24 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+
+ pm8921_l25: l25 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ bias-pull-down;
+ };
+
+ /* Low Voltage Switch */
+ pm8921_lvs1: lvs1 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs2: lvs2 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs3: lvs3 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs4: lvs4 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs5: lvs5 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs6: lvs6 {
+ bias-pull-down;
+ };
+
+ pm8921_lvs7: lvs7 {
+ bias-pull-down;
+ };
+
+ pm8921_ncp: ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+ };
+
+ gsbi@16000000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_SPI>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_default>;
+ spi@16080000 {
+ status = "ok";
+ };
+ };
+
+ pinctrl@800000 {
+ spi1_default: spi1_default {
+ mux {
+ pins = "gpio6", "gpio7", "gpio9";
+ function = "gsbi1";
+ };
+
+ mosi {
+ pins = "gpio6";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ miso {
+ pins = "gpio7";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs {
+ pins = "gpio8";
+ drive-strength = <12>;
+ bias-disable;
+ output-low;
+ };
+
+ clk {
+ pins = "gpio9";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+ };
+
+ usb@12500000 {
+ status = "okay";
+ dr_mode = "otg";
+
+ ulpi {
+ phy {
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+ };
+ };
+ };
+};
--
2.25.1
On 09/08/2022 03:03, Rudraksha Gupta wrote:
> This adds a very basic device tree file for the Samsung Galaxy Express
> SGH-I437. Currently, the following things work: UART, eMMC, SD Card, and
> USB.
Use subject prefix matching the subsystem.
>
> Signed-off-by: Rudraksha Gupta <[email protected]>
> ---
> v2:
> - Group the correct changes together
>
> arch/arm/boot/dts/Makefile | 1 +
> .../dts/qcom-msm8960-samsung-expressatt.dts | 337 ++++++++++++++++++
> 2 files changed, 338 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 05d8aef6e5d2..d55f196ad733 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1049,6 +1049,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> qcom-msm8660-surf.dtb \
> qcom-msm8916-samsung-serranove.dtb \
> qcom-msm8960-cdp.dtb \
> + qcom-msm8960-samsung-expressatt.dtb \
> qcom-msm8974-lge-nexus5-hammerhead.dtb \
> qcom-msm8974-sony-xperia-rhine-amami.dtb \
> qcom-msm8974-sony-xperia-rhine-honami.dtb \
> diff --git a/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
> new file mode 100644
> index 000000000000..cf557f0c9a59
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-msm8960-samsung-expressatt.dts
> @@ -0,0 +1,337 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +#include <dt-bindings/input/input.h>
> +#include "qcom-msm8960.dtsi"
> +
> +/ {
> + model = "Samsung Galaxy S3 SGH-I437";
> + compatible = "samsung,expressatt", "qcom,msm8960";
Undocumented compatible. Run checkpatch.
> +
> + aliases {
> + serial0 = &gsbi5_serial;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
These three properties are confusing. Why adding them?
> + };
> +
> + soc {
> + gsbi@16400000 {
Override by alias.
> + status = "ok";
okay, not ok. Status goes at the end of properties.
> + qcom,mode = <GSBI_PROT_I2C_UART>;
> + serial@16440000 {
> + status = "ok";
Same comments.
> + };
> + };
> +
> + amba {
> + /* eMMC */
> + sdcc1: mmc@12400000 {
OK, I'll abandon the review. This file is really not matching anything
in the upstream. Please start your work from a proper upstreamed, recent
board.
Best regards,
Krzysztof
> OK, I'll abandon the review. This file is really not matching anything
> in the upstream. Please start your work from a proper upstreamed, recent
> board.
I based it off of qcom-msm8960-cdp.dts. If there is a dts that you would
like
me to model off of, please link it to me. Otherwise, I will find another
recent
dts and model off of that
On 10/08/2022 02:57, Rudraksha Gupta wrote:
> > OK, I'll abandon the review. This file is really not matching anything
>
> > in the upstream. Please start your work from a proper upstreamed, recent
>
> > board.
>
> I based it off of qcom-msm8960-cdp.dts. If there is a dts that you would
> like
>
> me to model off of, please link it to me. Otherwise, I will find another
> recent
>
> dts and model off of that
>
From arm these look good:
arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
Best regards,
Krzysztof