Those three new drivers were missed on the initial conversion
to ReST format. So:
- Rename them to .rst;
- Add them to the hwmon index.rst index;
- add some blank lines at the "Supported systems:" part, in
order to allow Sphinx to properly identify new lines,
suppressing warnings and avoid it to output some random
lines in bold;
- When multiple authors are involved, change the authors
part to a list, in order to avoid adding blank lines.
- adjust the table cells (one of the tables seemed to be
assuming that tab is 4 positions instead of 8) and add
the table markup.
- be sure that the section markups have the same number of
characters as the section title.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
Documentation/hwmon/index.rst | 3 +++
Documentation/hwmon/{ir38064 => ir38064.rst} | 21 ++++++++++++-------
.../hwmon/{isl68137 => isl68137.rst} | 16 ++++++++++----
.../hwmon/{lochnagar => lochnagar.rst} | 7 +++++--
4 files changed, 33 insertions(+), 14 deletions(-)
rename Documentation/hwmon/{ir38064 => ir38064.rst} (76%)
rename Documentation/hwmon/{isl68137 => isl68137.rst} (85%)
rename Documentation/hwmon/{lochnagar => lochnagar.rst} (93%)
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 893804414510..3fa14fe7b49c 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -65,6 +65,8 @@ Hardware Monitoring Kernel Drivers
ina2xx.rst
ina3221.rst
ir35221.rst
+ ir38064.rst
+ isl68137.rst
it87.rst
jc42.rst
k10temp.rst
@@ -86,6 +88,7 @@ Hardware Monitoring Kernel Drivers
lm93.rst
lm95234.rst
lm95245.rst
+ lochnagar.rst
ltc2945.rst
ltc2978.rst
ltc2990.rst
diff --git a/Documentation/hwmon/ir38064 b/Documentation/hwmon/ir38064.rst
similarity index 76%
rename from Documentation/hwmon/ir38064
rename to Documentation/hwmon/ir38064.rst
index 9f218c39bfe6..c455d755a267 100644
--- a/Documentation/hwmon/ir38064
+++ b/Documentation/hwmon/ir38064.rst
@@ -2,15 +2,18 @@ Kernel driver ir38064
=====================
Supported chips:
+
* Infineon IR38064
+
Prefix: 'ir38064'
Addresses scanned: -
+
Datasheet: Publicly available at the Infineon webiste
https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca
Authors:
- Maxim Sloyko <[email protected]>
- Patrick Venture <[email protected]>
+ - Maxim Sloyko <[email protected]>
+ - Patrick Venture <[email protected]>
Description
-----------
@@ -26,29 +29,30 @@ devices explicitly.
Sysfs attributes
----------------
+======================= ===========================
curr1_label "iout1"
curr1_input Measured output current
curr1_crit Critical maximum current
curr1_crit_alarm Current critical high alarm
curr1_max Maximum current
-curr1_max_alarm Current high alarm
+curr1_max_alarm Current high alarm
in1_label "vin"
in1_input Measured input voltage
in1_crit Critical maximum input voltage
in1_crit_alarm Input voltage critical high alarm
-in1_min Minimum input voltage
+in1_min Minimum input voltage
in1_min_alarm Input voltage low alarm
in2_label "vout1"
in2_input Measured output voltage
in2_lcrit Critical minimum output voltage
-in2_lcrit_alarm Output voltage critical low alarm
+in2_lcrit_alarm Output voltage critical low alarm
in2_crit Critical maximum output voltage
in2_crit_alarm Output voltage critical high alarm
-in2_max Maximum output voltage
+in2_max Maximum output voltage
in2_max_alarm Output voltage high alarm
-in2_min Minimum output voltage
+in2_min Minimum output voltage
in2_min_alarm Output voltage low alarm
power1_label "pout1"
@@ -58,4 +62,5 @@ temp1_input Measured temperature
temp1_crit Critical high temperature
temp1_crit_alarm Chip temperature critical high alarm
temp1_max Maximum temperature
-temp1_max_alarm Chip temperature high alarm
+temp1_max_alarm Chip temperature high alarm
+======================= ===========================
diff --git a/Documentation/hwmon/isl68137 b/Documentation/hwmon/isl68137.rst
similarity index 85%
rename from Documentation/hwmon/isl68137
rename to Documentation/hwmon/isl68137.rst
index 92e5c5fc5b77..a5a7c8545c9e 100644
--- a/Documentation/hwmon/isl68137
+++ b/Documentation/hwmon/isl68137.rst
@@ -2,16 +2,22 @@ Kernel driver isl68137
======================
Supported chips:
+
* Intersil ISL68137
+
Prefix: 'isl68137'
+
Addresses scanned: -
- Datasheet: Publicly available at the Intersil website
+
+ Datasheet:
+
+ Publicly available at the Intersil website
https://www.intersil.com/content/dam/Intersil/documents/isl6/isl68137.pdf
Authors:
- Maxim Sloyko <[email protected]>
- Robert Lippert <[email protected]>
- Patrick Venture <[email protected]>
+ - Maxim Sloyko <[email protected]>
+ - Robert Lippert <[email protected]>
+ - Patrick Venture <[email protected]>
Description
-----------
@@ -32,6 +38,7 @@ Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute
Additional Sysfs attributes
---------------------------
+======================= ====================================
avs(0|1)_enable Controls the AVS state of each rail.
curr1_label "iin"
@@ -70,3 +77,4 @@ temp[1-3]_crit Critical high temperature
temp[1-3]_crit_alarm Chip temperature critical high alarm
temp[1-3]_max Maximum temperature
temp[1-3]_max_alarm Chip temperature high alarm
+======================= ====================================
diff --git a/Documentation/hwmon/lochnagar b/Documentation/hwmon/lochnagar.rst
similarity index 93%
rename from Documentation/hwmon/lochnagar
rename to Documentation/hwmon/lochnagar.rst
index e9686fb3eb40..1d609c4d18c3 100644
--- a/Documentation/hwmon/lochnagar
+++ b/Documentation/hwmon/lochnagar.rst
@@ -1,5 +1,5 @@
Kernel Driver Lochnagar
-========================
+=======================
Supported systems:
* Cirrus Logic : Lochnagar 2
@@ -21,6 +21,7 @@ by software.
Sysfs attributes
----------------
+======================= =======================================================
temp1_input The Lochnagar board temperature (milliCelsius)
in0_input Measured voltage for DBVDD1 (milliVolts)
in0_label "DBVDD1"
@@ -76,5 +77,7 @@ curr8_label "MICVDD"
power8_average Measured average power for MICVDD (microWatts)
power8_average_interval Power averaging time input valid from 1 to 1708mS
power8_label "MICVDD"
+======================= =======================================================
-Note: It is not possible to measure voltage on the SYSVDD rail.
+Note:
+ It is not possible to measure voltage on the SYSVDD rail.
--
2.20.1
On Mon, Apr 22, 2019 at 02:39:37PM -0300, Mauro Carvalho Chehab wrote:
> Those three new drivers were missed on the initial conversion
> to ReST format. So:
>
> - Rename them to .rst;
> - Add them to the hwmon index.rst index;
> - add some blank lines at the "Supported systems:" part, in
> order to allow Sphinx to properly identify new lines,
> suppressing warnings and avoid it to output some random
> lines in bold;
> - When multiple authors are involved, change the authors
> part to a list, in order to avoid adding blank lines.
> - adjust the table cells (one of the tables seemed to be
> assuming that tab is 4 positions instead of 8) and add
> the table markup.
> - be sure that the section markups have the same number of
> characters as the section title.
>
> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Applied to hwmon-next.
Thanks,
Guenter