From: Song Hui <[email protected]>
Update the nodes to include little-endian
property to be consistent with the hardware.
Signed-off-by: Song Hui <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index aef5b06..7ccbbfc 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -277,33 +277,36 @@
};
gpio1: gpio@2300000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ little-endian;
};
gpio2: gpio@2310000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ little-endian;
};
gpio3: gpio@2320000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ little-endian;
};
usb0: usb@3100000 {
--
2.9.5
From: Song Hui <[email protected]>
Update the NXP GPIO node dt-binding file for QorIQ and
Layerscape platforms, and add one more example with
ls1028a GPIO node.
Signed-off-by: Song Hui <[email protected]>
---
Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
index 69d4616..fbe6d75 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
@@ -28,7 +28,7 @@ gpio0: gpio@1100 {
Example of gpio-controller node for a ls2080a SoC:
gpio0: gpio@2300000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ compatible = "fsl,ls1028a-gpio","fsl,ls2080a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <0 36 0x4>; /* Level high type */
gpio-controller;
--
2.9.5
On Monday, August 5, 2019, 11:14:32 AM CEST Hui Song wrote:
> From: Song Hui <[email protected]>
>
> Update the NXP GPIO node dt-binding file for QorIQ and
> Layerscape platforms, and add one more example with
> ls1028a GPIO node.
>
> Signed-off-by: Song Hui <[email protected]>
> ---
> Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
> index 69d4616..fbe6d75 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
> @@ -28,7 +28,7 @@ gpio0: gpio@1100 {
> Example of gpio-controller node for a ls2080a SoC:
^^^^^^^ ^^^^^^^
This is an example for ls2080a...
> gpio0: gpio@2300000 {
> - compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
> + compatible = "fsl,ls1028a-gpio","fsl,ls2080a-gpio", "fsl,qoriq-gpio";
so I doubt there should be a ls1028a compatible here though.
> reg = <0x0 0x2300000 0x0 0x10000>;
> interrupts = <0 36 0x4>; /* Level high type */
> gpio-controller;
Best regards,
Alexander