The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warning:
arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts
index b6cb78870cd5..5a25bdbbeb68 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts
@@ -49,7 +49,7 @@ display0_in: endpoint {
backlight {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 3000>;
+ pwms = <&pwm3 0 3000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
pinctrl-names = "default";
@@ -69,6 +69,5 @@ &ipu1_di0_disp0 {
};
&pwm3 {
- #pwm-cells = <2>;
status = "okay";
};
--
2.43.0