The binding dictates using 3 pwm-cells. Adhere to that.
This fixes the following dtbs_check warnings:
arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected
from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml#
There is no need for an explicit status = "okay" in the pwm node as
the soc dtsi doesn't disable this device. Drop this property, too.
Signed-off-by: Uwe Kleine-König <[email protected]>
---
arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
index c6e85e4a0883..0c6ed5f988c2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -23,7 +23,7 @@ memory@80000000 {
backlight_display: backlight-display {
compatible = "pwm-backlight";
- pwms = <&pwm3 0 5000000>;
+ pwms = <&pwm3 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
@@ -295,10 +295,8 @@ display_out: endpoint {
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
- status = "okay";
};
&snvs_poweroff {
--
2.43.0