This is the start of the stable review cycle for the 5.10.182 release.
There are 22 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat, 03 Jun 2023 13:19:19 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.182-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.10.182-rc1
Paul Blakey <[email protected]>
netfilter: ctnetlink: Support offloaded conntrack entry deletion
Nicolas Dichtel <[email protected]>
ipv{4,6}/raw: fix output xfrm lookup wrt protocol
Carlos Llamas <[email protected]>
binder: fix UAF caused by faulty buffer cleanup
Ruihan Li <[email protected]>
bluetooth: Add cmd validity checks at the start of hci_sock_ioctl()
David Epping <[email protected]>
net: phy: mscc: enable VSC8501/2 RGMII RX clock
Shay Drory <[email protected]>
net/mlx5: Devcom, serialize devcom registration
Mark Bloch <[email protected]>
net/mlx5: devcom only supports 2 ports
Alexander Stein <[email protected]>
regulator: pca9450: Fix BUCK2 enable_mask
Axel Lin <[email protected]>
regulator: pca9450: Convert to use regulator_set_ramp_delay_regmap
Matti Vaittinen <[email protected]>
regulator: Add regmap helper for ramp-delay setting
Hans de Goede <[email protected]>
power: supply: bq24190: Call power_supply_changed() after updating input current
Hans de Goede <[email protected]>
power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier()
Hans de Goede <[email protected]>
power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize
Hans de Goede <[email protected]>
power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes
Hans de Goede <[email protected]>
power: supply: bq27xxx: Move bq27xxx_battery_update() down
Sicelo A. Mhlongo <[email protected]>
power: supply: bq27xxx: expose battery data when CI=1
Hans de Goede <[email protected]>
power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()
Matthias Schiffer <[email protected]>
power: supply: bq27xxx: make status more robust
Matthias Schiffer <[email protected]>
power: supply: bq27xxx: fix sign of current_now for newer ICs
Andreas Kemnade <[email protected]>
power: supply: bq27xxx: fix polarity of current_now
Tony Luck <[email protected]>
x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define
Tony Luck <[email protected]>
x86/cpu: Add Raptor Lake to Intel family
-------------
Diffstat:
Makefile | 4 +-
arch/x86/include/asm/intel-family.h | 2 +
drivers/android/binder.c | 26 ++-
.../net/ethernet/mellanox/mlx5/core/lib/devcom.c | 35 ++--
.../net/ethernet/mellanox/mlx5/core/lib/devcom.h | 2 +
drivers/net/phy/mscc/mscc.h | 1 +
drivers/net/phy/mscc/mscc_main.c | 54 ++---
drivers/power/supply/bq24190_charger.c | 13 +-
drivers/power/supply/bq27xxx_battery.c | 224 +++++++++++----------
drivers/power/supply/power_supply_core.c | 57 +++---
drivers/regulator/helpers.c | 65 ++++++
drivers/regulator/pca9450-regulator.c | 55 +++--
include/linux/power/bq27xxx_battery.h | 3 +
include/linux/power_supply.h | 5 +-
include/linux/regulator/driver.h | 5 +
include/net/ip.h | 2 +
include/uapi/linux/in.h | 2 +
net/bluetooth/hci_sock.c | 28 +++
net/ipv4/ip_sockglue.c | 12 +-
net/ipv4/raw.c | 5 +-
net/ipv6/raw.c | 3 +-
net/netfilter/nf_conntrack_netlink.c | 8 -
22 files changed, 387 insertions(+), 224 deletions(-)
On 6/1/2023 6:20 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.182 release.
> There are 22 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 03 Jun 2023 13:19:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.182-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on
BMIPS_GENERIC:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On 6/1/23 07:20, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.182 release.
> There are 22 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 03 Jun 2023 13:19:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.182-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On Thu, 01 Jun 2023 14:20:58 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.182 release.
> There are 22 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 03 Jun 2023 13:19:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.182-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests passing for Tegra ...
Test results for stable-v5.10:
11 builds: 11 pass, 0 fail
28 boots: 28 pass, 0 fail
75 tests: 75 pass, 0 fail
Linux version: 5.10.182-rc1-gf2a19702506c
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter <[email protected]>
Jon
On Thu, 1 Jun 2023 at 18:52, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.10.182 release.
> There are 22 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 03 Jun 2023 13:19:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.182-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.10.182-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.10.y
* git commit: f2a19702506cf5aee6bf44c1a1c48520b2455d75
* git describe: v5.10.181-23-gf2a19702506c
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.181-23-gf2a19702506c
## Test Regressions (compared to v5.10.181)
## Metric Regressions (compared to v5.10.181)
## Test Fixes (compared to v5.10.181)
## Metric Fixes (compared to v5.10.181)
## Test result summary
total: 100555, pass: 83695, fail: 2731, skip: 13973, xfail: 156
## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 117 total, 116 passed, 1 failed
* arm64: 45 total, 43 passed, 2 failed
* i386: 35 total, 33 passed, 2 failed
* mips: 27 total, 26 passed, 1 failed
* parisc: 8 total, 8 passed, 0 failed
* powerpc: 26 total, 20 passed, 6 failed
* riscv: 12 total, 11 passed, 1 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 14 total, 12 passed, 2 failed
* sparc: 8 total, 8 passed, 0 failed
* x86_64: 38 total, 36 passed, 2 failed
## Test suites summary
* boot
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-net-mptcp
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-user_events
* kselftest-vDSO
* kselftest-watchdog
* kselftest-x86
* kselftest-zram
* kunit
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
On Thu, Jun 01, 2023 at 02:20:58PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.182 release.
> There are 22 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 03 Jun 2023 13:19:19 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 162 pass: 162 fail: 0
Qemu test results:
total: 485 pass: 485 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
Hello Greg,
> From: Greg Kroah-Hartman <[email protected]>
> Sent: Thursday, June 1, 2023 2:21 PM
>
> This is the start of the stable review cycle for the 5.10.182 release.
> There are 22 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 03 Jun 2023 13:19:19 +0000.
> Anything received after that time might be too late.
CIP configurations built and booted with Linux 5.10.182-rc1 (f2a19702506c):
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/886202472
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/commits/linux-5.10.y
Tested-by: Chris Paterson (CIP) <[email protected]>
Kind regards, Chris