Support more sample rate in asrc
Shengjiu Wang (3):
ASoC: fsl_asrc: Fix the issue about unsupported rate
ASoC: fsl_asrc: replace the process_option table with function
ASoC: fsl_asrc: Unify the supported input and output rate
Changes in v6
- add acked-by
- fixed minor issue according to comments in v5
Changes in v5
- fix the [1/24, 8]
- move fsl_asrc_sel_proc before setting
Changes in v4
- add patch to Fix the [8kHz, 30kHz] open set issue.
Changes in v3
- remove FSL_ASRC_RATES
- refine fsl_asrc_sel_proc according to comments
Changes in v2
- add more comments in code
- add commit "Unify the supported input and output rate"
sound/soc/fsl/fsl_asrc.c | 105 ++++++++++++++++++++++++++++++++---------------
1 file changed, 71 insertions(+), 34 deletions(-)
--
1.9.1
When the output sample rate is [8kHz, 30kHz], the limitation
of the supported ratio range is [1/24, 8]. In the driver
we use (8kHz, 30kHz) instead of [8kHz, 30kHz].
So this patch is to fix this issue and the potential rounding
issue with divider.
Fixes: fff6e03c7b65 ("ASoC: fsl_asrc: add support for 8-30kHz
output sample rate")
Cc: <[email protected]>
Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 0b937924d2e4..ea035c12a325 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -282,8 +282,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
return -EINVAL;
}
- if ((outrate > 8000 && outrate < 30000) &&
- (outrate/inrate > 24 || inrate/outrate > 8)) {
+ if ((outrate >= 8000 && outrate <= 30000) &&
+ (outrate > 24 * inrate || inrate > 8 * outrate)) {
pair_err("exceed supported ratio range [1/24, 8] for \
inrate/outrate: %d/%d\n", inrate, outrate);
return -EINVAL;
--
1.9.1
When we want to support more sample rate, for example 12kHz/24kHz
we need update the process_option table, if we want to support more
sample rate next time, the table need to be updated again. which
is not flexible.
We got a function fsl_asrc_sel_proc to replace the table, which can
give the pre-processing and post-processing options according to
the sample rate.
Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 71 ++++++++++++++++++++++++++++++++++--------------
1 file changed, 51 insertions(+), 20 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index ea035c12a325..a8d6710f2541 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -26,24 +26,6 @@
#define pair_dbg(fmt, ...) \
dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
-/* Sample rates are aligned with that defined in pcm.h file */
-static const u8 process_option[][12][2] = {
- /* 8kHz 11.025kHz 16kHz 22.05kHz 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */
- {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */
- {{1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */
- {{1, 2}, {1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */
- {{1, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */
- {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */
- {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */
-};
-
/* Corresponding to process_option */
static int supported_input_rate[] = {
5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200,
@@ -80,6 +62,52 @@
static unsigned char *clk_map[2];
/**
+ * Select the pre-processing and post-processing options
+ * Make sure to exclude following unsupported cases before
+ * calling this function:
+ * 1) inrate > 8.125 * outrate
+ * 2) inrate > 16.125 * outrate
+ *
+ * inrate: input sample rate
+ * outrate: output sample rate
+ * pre_proc: return value for pre-processing option
+ * post_proc: return value for post-processing option
+ */
+static void fsl_asrc_sel_proc(int inrate, int outrate,
+ int *pre_proc, int *post_proc)
+{
+ bool post_proc_cond2;
+ bool post_proc_cond0;
+
+ /* select pre_proc between [0, 2] */
+ if (inrate * 8 > 33 * outrate)
+ *pre_proc = 2;
+ else if (inrate * 8 > 15 * outrate) {
+ if (inrate > 152000)
+ *pre_proc = 2;
+ else
+ *pre_proc = 1;
+ } else if (inrate < 76000)
+ *pre_proc = 0;
+ else if (inrate > 152000)
+ *pre_proc = 2;
+ else
+ *pre_proc = 1;
+
+ /* Condition for selection of post-processing */
+ post_proc_cond2 = (inrate * 15 > outrate * 16 && outrate < 56000) ||
+ (inrate > 56000 && outrate < 56000);
+ post_proc_cond0 = inrate * 23 < outrate * 8;
+
+ if (post_proc_cond2)
+ *post_proc = 2;
+ else if (post_proc_cond0)
+ *post_proc = 0;
+ else
+ *post_proc = 1;
+}
+
+/**
* Request ASRC pair
*
* It assigns pair by the order of A->C->B because allocation of pair B,
@@ -239,6 +267,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
u32 inrate, outrate, indiv, outdiv;
u32 clk_index[2], div[2];
int in, out, channels;
+ int pre_proc, post_proc;
struct clk *clk;
bool ideal;
@@ -377,11 +406,13 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
ASRCTR_IDRi_MASK(index) | ASRCTR_USRi_MASK(index),
ASRCTR_IDR(index) | ASRCTR_USR(index));
+ fsl_asrc_sel_proc(inrate, outrate, &pre_proc, &post_proc);
+
/* Apply configurations for pre- and post-processing */
regmap_update_bits(asrc_priv->regmap, REG_ASRCFG,
ASRCFG_PREMODi_MASK(index) | ASRCFG_POSTMODi_MASK(index),
- ASRCFG_PREMOD(index, process_option[in][out][0]) |
- ASRCFG_POSTMOD(index, process_option[in][out][1]));
+ ASRCFG_PREMOD(index, pre_proc) |
+ ASRCFG_POSTMOD(index, post_proc));
return fsl_asrc_set_ideal_ratio(pair, inrate, outrate);
}
--
1.9.1
Unify the supported input and output rate, add the
12kHz/24kHz/128kHz to the support list
Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 32 +++++++++++++++++++-------------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index a8d6710f2541..cbbf6257f08a 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -27,13 +27,14 @@
dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
/* Corresponding to process_option */
-static int supported_input_rate[] = {
- 5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200,
- 96000, 176400, 192000,
+static unsigned int supported_asrc_rate[] = {
+ 5512, 8000, 11025, 12000, 16000, 22050, 24000, 32000, 44100, 48000,
+ 64000, 88200, 96000, 128000, 176400, 192000,
};
-static int supported_asrc_rate[] = {
- 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000,
+static struct snd_pcm_hw_constraint_list fsl_asrc_rate_constraints = {
+ .count = ARRAY_SIZE(supported_asrc_rate),
+ .list = supported_asrc_rate,
};
/**
@@ -293,11 +294,11 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
ideal = config->inclk == INCLK_NONE;
/* Validate input and output sample rates */
- for (in = 0; in < ARRAY_SIZE(supported_input_rate); in++)
- if (inrate == supported_input_rate[in])
+ for (in = 0; in < ARRAY_SIZE(supported_asrc_rate); in++)
+ if (inrate == supported_asrc_rate[in])
break;
- if (in == ARRAY_SIZE(supported_input_rate)) {
+ if (in == ARRAY_SIZE(supported_asrc_rate)) {
pair_err("unsupported input sample rate: %dHz\n", inrate);
return -EINVAL;
}
@@ -311,7 +312,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
return -EINVAL;
}
- if ((outrate >= 8000 && outrate <= 30000) &&
+ if ((outrate >= 5512 && outrate <= 30000) &&
(outrate > 24 * inrate || inrate > 8 * outrate)) {
pair_err("exceed supported ratio range [1/24, 8] for \
inrate/outrate: %d/%d\n", inrate, outrate);
@@ -486,7 +487,9 @@ static int fsl_asrc_dai_startup(struct snd_pcm_substream *substream,
snd_pcm_hw_constraint_step(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_CHANNELS, 2);
- return 0;
+
+ return snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE, &fsl_asrc_rate_constraints);
}
static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
@@ -599,7 +602,6 @@ static int fsl_asrc_dai_probe(struct snd_soc_dai *dai)
return 0;
}
-#define FSL_ASRC_RATES SNDRV_PCM_RATE_8000_192000
#define FSL_ASRC_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S20_3LE)
@@ -610,14 +612,18 @@ static int fsl_asrc_dai_probe(struct snd_soc_dai *dai)
.stream_name = "ASRC-Playback",
.channels_min = 1,
.channels_max = 10,
- .rates = FSL_ASRC_RATES,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .rates = SNDRV_PCM_RATE_KNOT,
.formats = FSL_ASRC_FORMATS,
},
.capture = {
.stream_name = "ASRC-Capture",
.channels_min = 1,
.channels_max = 10,
- .rates = FSL_ASRC_RATES,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .rates = SNDRV_PCM_RATE_KNOT,
.formats = FSL_ASRC_FORMATS,
},
.ops = &fsl_asrc_dai_ops,
--
1.9.1
On Mon, Apr 22, 2019 at 04:52:02AM +0000, S.j. Wang wrote:
> When the output sample rate is [8kHz, 30kHz], the limitation
> of the supported ratio range is [1/24, 8]. In the driver
> we use (8kHz, 30kHz) instead of [8kHz, 30kHz].
> So this patch is to fix this issue and the potential rounding
> issue with divider.
>
None of this series applies either, with similar error messages:
Applying: ASoC: fsl_asrc: Fix the issue about unsupported rate
Using index info to reconstruct a base tree...
error: patch failed: sound/soc/fsl/fsl_asrc.c:282
error: sound/soc/fsl/fsl_asrc.c: patch does not apply
error: Did you hand edit your patch?
It does not apply to blobs recorded in its index.
(I get the same error message for your PM patch when applying without
using patchwork as my main workflow does.)