Add support for this smartphone from HTC which is based on the MSM8926
SoC and codenamed "memul".
Depends on, runtime-only, bootloader enables watchdog so we need to pet
it to stay alive:
https://lore.kernel.org/linux-arm-msm/[email protected]/T/
Signed-off-by: Luca Weiss <[email protected]>
---
Changes in v2:
- Pick up tags
- Add spaces around regulator nodes
- Set firmware-name for adsp
- Expand reserved memory regions to cover everything somehow reserved
downstream, leave no gaps. Seems to finally fix also nbd randomly
failing
- Remove internal storage since somehow it has killed itself on my
device since last time, maybe by my random memory testing writing some
not-so-great commands to it. So let's be safe and remove it.
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Luca Weiss (3):
dt-bindings: vendor-prefixes: document HTC Corporation
dt-bindings: arm: qcom: Add HTC One Mini 2
ARM: dts: qcom: Add support for HTC One Mini 2
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/qcom/Makefile | 1 +
arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts | 369 +++++++++++++++++++++
4 files changed, 373 insertions(+)
---
base-commit: 9b969874004ff05d05e4340bacc1699f72f58686
change-id: 20231002-htc-memul-742a8517d24b
Best regards,
--
Luca Weiss <[email protected]>
Add support for this smartphone based on the MSM8926 SoC, codenamed
"memul".
Supported functionality:
* Power & volume buttons
* ADSP
* Magnetometer
* Accelerometer
* Touchscreen
* Vibrator
* SD card
* Charger
* USB
Signed-off-by: Luca Weiss <[email protected]>
---
arch/arm/boot/dts/qcom/Makefile | 1 +
arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts | 369 ++++++++++++++++++++++
2 files changed, 370 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index a3d293e40820..0cb272f4fa45 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8916-samsung-e7.dtb \
qcom-msm8916-samsung-grandmax.dtb \
qcom-msm8916-samsung-serranove.dtb \
+ qcom-msm8926-htc-memul.dtb \
qcom-msm8926-microsoft-superman-lte.dtb \
qcom-msm8926-microsoft-tesla.dtb \
qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
new file mode 100644
index 000000000000..e4b0eaf101ff
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Luca Weiss <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+ model = "HTC One Mini 2";
+ compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ unknown@5b00000 {
+ reg = <0x05b00000 0x200000>;
+ no-map;
+ };
+
+ unknown@7500000 {
+ reg = <0x07500000 0xb00000>;
+ no-map;
+ };
+
+ mpss_region: mpss@8000000 {
+ reg = <0x08000000 0x4f00000>;
+ no-map;
+ };
+
+ unknown@cf00000 {
+ reg = <0x0cf00000 0x200000>;
+ no-map;
+ };
+
+ mba_region: mba@d100000 {
+ reg = <0x0d100000 0x3a000>;
+ no-map;
+ };
+
+ unknown@d13a000 {
+ reg = <0x0d13a000 0xc6000>;
+ no-map;
+ };
+
+ wcnss_region: wcnss@d200000 {
+ reg = <0x0d200000 0x650000>;
+ no-map;
+ };
+
+ unknown@d850000 {
+ reg = <0x0d850000 0x3b0000>;
+ no-map;
+ };
+
+ adsp_region: adsp@dc00000 {
+ reg = <0x0dc00000 0x1400000>;
+ no-map;
+ };
+
+ unknown@f000000 {
+ reg = <0x0f000000 0x500000>;
+ no-map;
+ };
+
+ venus_region: venus@f500000 {
+ reg = <0x0f500000 0x500000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+
+ unknown@fb00000 {
+ reg = <0x0fb00000 0x1b00000>;
+ no-map;
+ };
+ };
+};
+
+&adsp {
+ firmware-name = "qcom/msm8926/memul/adsp.mbn";
+ status = "okay";
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ magnetometer@d {
+ compatible = "asahi-kasei,ak8963";
+ reg = <0x0d>;
+ interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&pm8226_l19>;
+ vid-supply = <&pm8226_l28>;
+ };
+
+ accelerometer@18 {
+ compatible = "bosch,bma250e";
+ reg = <0x18>;
+ interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&pm8226_l19>;
+ vddio-supply = <&pm8226_l28>;
+ };
+};
+
+&blsp1_i2c4 {
+ status = "okay";
+
+ /* TFA9887 @ 34 */
+ /* TFA9887 @ 35 */
+};
+
+&blsp1_i2c5 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8226_l19>;
+
+ syna,startup-delay-ms = <160>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ /* NCP6924 Camera Regulators @ 10 */
+ /* PN544 NFC @ 28 */
+ /* TPS61310 Flash/Torch @ 33 */
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_lvs1: lvs1 {};
+ };
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1750000>;
+ qcom,fast-charge-current-limit = <1750000>;
+ qcom,fast-charge-safe-voltage = <4360000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,auto-recharge-threshold-voltage = <4300000>;
+ qcom,minimum-input-voltage = <4300000>;
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
--
2.42.0
Document the compatible for the MSM8926-based HTC One Mini 2 smartphone.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 88b84035e7b1..60605f2d237b 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -194,6 +194,7 @@ properties:
- items:
- enum:
+ - htc,memul
- microsoft,superman-lte
- microsoft,tesla
- const: qcom,msm8926
--
2.42.0
On 10/24/23 22:57, Luca Weiss wrote:
> Add support for this smartphone based on the MSM8926 SoC, codenamed
> "memul".
>
> Supported functionality:
> * Power & volume buttons
> * ADSP
> * Magnetometer
> * Accelerometer
> * Touchscreen
> * Vibrator
> * SD card
> * Charger
> * USB
>
> Signed-off-by: Luca Weiss <[email protected]>
> ---
sdhci vddio should have regulator-allow-set-load
otherwise:
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad