2016-10-08 17:36:43

by Scott Branden

Subject: [PATCH v2] pwm: add COMPILE_TEST and default y for brcm-iproc-pwm

Enable COMPILE_TEST for broader compile coverage.
Default y for IPROC PWM driver for IPROC SoCs.
This allows you to turn it on simply by selecting CONFIG_PWM.

Signed-off-by: Scott Branden <[email protected]>
---
drivers/pwm/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 80a566a..68cd13d 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -76,7 +76,8 @@ config PWM_ATMEL_TCB

config PWM_BCM_IPROC
tristate "iProc PWM support"
- depends on ARCH_BCM_IPROC
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ default ARCH_BCM_IPROC
help
Generic PWM framework driver for Broadcom iProc PWM block. This
block is used in Broadcom iProc SoC's.
--
2.5.0

2016-10-08 20:21:17

by Ray Jui

Subject: Re: [PATCH v2] pwm: add COMPILE_TEST and default y for brcm-iproc-pwm

Hi Scott,

On 10/8/2016 10:36 AM, Scott Branden wrote:
> Enable COMPILE_TEST for broader compile coverage.
> Default y for IPROC PWM driver for IPROC SoCs.
> This allows you to turn it on simply by selecting CONFIG_PWM.
>
> Signed-off-by: Scott Branden <[email protected]>
> ---
> drivers/pwm/Kconfig | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 80a566a..68cd13d 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -76,7 +76,8 @@ config PWM_ATMEL_TCB
>
> config PWM_BCM_IPROC
> tristate "iProc PWM support"
> - depends on ARCH_BCM_IPROC
> + depends on ARCH_BCM_IPROC || COMPILE_TEST
Would be nice to also add a dependency on COMMON_CLK here.

> + default ARCH_BCM_IPROC
> help
> Generic PWM framework driver for Broadcom iProc PWM block. This
> block is used in Broadcom iProc SoC's.

Thanks,

Ray

2016-10-08 20:49:45

by Scott Branden

Subject: Re: [PATCH v2] pwm: add COMPILE_TEST and default y for brcm-iproc-pwm

Hi Ray,

On 16-10-08 01:20 PM, Ray Jui wrote:
> Hi Scott,
>
> On 10/8/2016 10:36 AM, Scott Branden wrote:
>> Enable COMPILE_TEST for broader compile coverage.
>> Default y for IPROC PWM driver for IPROC SoCs.
>> This allows you to turn it on simply by selecting CONFIG_PWM.
>>
>> Signed-off-by: Scott Branden <[email protected]>
>> ---
>> drivers/pwm/Kconfig | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
>> index 80a566a..68cd13d 100644
>> --- a/drivers/pwm/Kconfig
>> +++ b/drivers/pwm/Kconfig
>> @@ -76,7 +76,8 @@ config PWM_ATMEL_TCB
>> config PWM_BCM_IPROC
>> tristate "iProc PWM support"
>> - depends on ARCH_BCM_IPROC
>> + depends on ARCH_BCM_IPROC || COMPILE_TEST
> Would be nice to also add a dependency on COMMON_CLK here.
will add depends on COMMON_CLK
>
>> + default ARCH_BCM_IPROC
>> help
>> Generic PWM framework driver for Broadcom iProc PWM block. This
>> block is used in Broadcom iProc SoC's.
>
> Thanks,
>
> Ray

Regards,
Scott