PATCH V9 2021-11-24 22:29:14:
- patch 6/8: remove optional <0> for assigned-clocks and unintentionally included "unwedge" setup (found by [email protected])
- patch 4/8: some cosmetics
make regulator enable/disable only if not NULL (found by [email protected])
simplify/fix error handling and driver cleanup on remove (proposed by [email protected])
- patch 3/8: fix #include path in example (found by [email protected])
fix missing "i" in unevaluatedProperties (found by [email protected])
fix 4 spaces indentation for required: property (found by [email protected])
PATCH V8 2021-11-23 19:14:00:
- fix a bad editing result from patch 2/8 (found by [email protected])
PATCH V7 2021-11-23 18:46:23:
- changed gpio polarity of hdmi_power to 0 (suggested by [email protected])
- fixed LCD1 irq number (bug found by [email protected])
- removed "- 4" for calculating max_register (suggested by [email protected])
- use unevaluatedPropertes instead of additionalProperties (suggested by [email protected])
- moved and renamed ingenic,jz4780-hdmi.yaml (suggested by [email protected])
- adjusted assigned-clocks changes to upstream which added some for SSI (by [email protected])
- rebased and tested with v5.16-rc2 + patch set drm/ingenic by [email protected] (by [email protected])
PATCH V6 2021-11-10 20:43:33:
- changed CONFIG_DRM_INGENIC_DW_HDMI to "m" (by [email protected])
- made ingenic-dw-hdmi an independent platform driver which can be compiled as module
and removed error patch fixes for IPU (suggested by [email protected])
- moved assigned-clocks from jz4780.dtsi to ci20.dts (suggested by [email protected])
- fixed reg property in jz4780.dtsi to cover all registers incl. gamma and vee (by [email protected])
- added a base patch to calculate regmap size from DTS reg property (requested by [email protected])
- restored resetting all bits except one in LCDOSDC (requested by [email protected])
- clarified setting of cpos (suggested by [email protected])
- moved bindings definition for ddc-i2c-bus (suggested by [email protected])
- simplified mask definitions for JZ_LCD_DESSIZE (requested by [email protected])
- removed setting alpha premultiplication (suggested by [email protected])
- removed some comments (suggested by [email protected])
PATCH V5 2021-10-05 14:28:44:
- dropped mode_fixup and timings support in dw-hdmi as it is no longer needed in this V5 (by [email protected])
- dropped "drm/ingenic: add some jz4780 specific features" (stimulated by [email protected])
- fixed typo in commit subject: "synopsis" -> "synopsys" (by [email protected])
- swapped clocks in jz4780.dtsi to match synopsys,dw-hdmi.yaml (by [email protected])
- improved, simplified, fixed, dtbschecked ingenic-jz4780-hdmi.yaml and made dependent of bridge/synopsys,dw-hdmi.yaml (based on suggestions by [email protected])
- fixed binding vs. driver&DTS use of hdmi-5v regulator (suggested by [email protected])
- dropped "drm/bridge: synopsis: Fix to properly handle HPD" - was a no longer needed workaround for a previous version
(suggested by [email protected])
PATCH V4 2021-09-27 18:44:38:
- fix setting output_port = 1 (issue found by [email protected])
- ci20.dts: convert to use hdmi-connector (by [email protected])
- add a hdmi-regulator to control +5V power (by [email protected])
- added a fix to dw-hdmi to call drm_kms_helper_hotplug_event on plugin event detection (by [email protected])
- always allocate extended descriptor but initialize only for jz4780 (by [email protected])
- updated to work on top of "[PATCH v3 0/6] drm/ingenic: Various improvements v3" (by [email protected])
- rebased to v5.13-rc3
PATCH V3 2021-08-08 07:10:50:
This series adds HDMI support for JZ4780 and CI20 board (and fixes one IPU related issue in registration error path)
- [patch 1/8] switched from mode_fixup to atomic_check (suggested by [email protected])
- the call to the dw-hdmi specialization is still called mode_fixup
- [patch 3/8] diverse fixes for ingenic-drm-drv (suggested by [email protected])
- factor out some non-HDMI features of the jz4780 into a separate patch
- multiple fixes around max height
- do not change regmap config but a copy on stack
- define some constants
- factor out fixing of drm_init error path for IPU into separate patch
- use FIELD_PREP()
- [patch 8/8] conversion to component framework dropped (suggested by [email protected] and [email protected])
PATCH V2 2021-08-05 16:08:05:
- code and commit messages revisited for checkpatch warnings
- rebased on v5.14-rc4
- include (failed, hence RFC 8/8) attempt to convert to component framework
(was suggested by Paul Cercueil <[email protected]> a while ago)
This series adds HDMI support for JZ4780 and CI20 board
H. Nikolaus Schaller (3):
drm/ingenic: prepare ingenic drm for later addition of JZ4780
MIPS: defconfig: CI20: configure for DRM_DW_HDMI_JZ4780
[RFC] MIPS: DTS: Ingenic: adjust register size to available registers
Paul Boddie (4):
drm/ingenic: Add support for JZ4780 and HDMI output
drm/ingenic: Add dw-hdmi driver for jz4780
MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD
controllers
MIPS: DTS: CI20: Add DT nodes for HDMI setup
Sam Ravnborg (1):
dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema
.../display/bridge/ingenic,jz4780-hdmi.yaml | 76 ++++++++++
.../display/bridge/synopsys,dw-hdmi.yaml | 3 +
arch/mips/boot/dts/ingenic/ci20.dts | 72 ++++++++-
arch/mips/boot/dts/ingenic/jz4725b.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4780.dtsi | 40 +++++
arch/mips/configs/ci20_defconfig | 6 +
drivers/gpu/drm/ingenic/Kconfig | 9 ++
drivers/gpu/drm/ingenic/Makefile | 1 +
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 62 +++++++-
drivers/gpu/drm/ingenic/ingenic-drm.h | 38 +++++
drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c | 138 ++++++++++++++++++
13 files changed, 443 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
create mode 100644 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
--
2.33.0
From: Paul Boddie <[email protected]>
A specialisation of the generic Synopsys HDMI driver is employed for
JZ4780 HDMI support. This requires a new driver, plus device tree and
configuration modifications.
Here we add jz4780 device tree setup.
Signed-off-by: Paul Boddie <[email protected]>
Signed-off-by: H. Nikolaus Schaller <[email protected]>
---
arch/mips/boot/dts/ingenic/jz4780.dtsi | 40 ++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index b0a4e2e019c36..3f9ea47a10cd2 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -444,6 +444,46 @@ i2c4: i2c@10054000 {
status = "disabled";
};
+ hdmi: hdmi@10180000 {
+ compatible = "ingenic,jz4780-dw-hdmi";
+ reg = <0x10180000 0x8000>;
+ reg-io-width = <4>;
+
+ clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+
+ status = "disabled";
+ };
+
+ lcdc0: lcdc0@13050000 {
+ compatible = "ingenic,jz4780-lcd";
+ reg = <0x13050000 0x1800>;
+
+ clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>;
+ clock-names = "lcd", "lcd_pclk";
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ status = "disabled";
+ };
+
+ lcdc1: lcdc1@130a0000 {
+ compatible = "ingenic,jz4780-lcd";
+ reg = <0x130a0000 0x1800>;
+
+ clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>;
+ clock-names = "lcd", "lcd_pclk";
+
+ interrupt-parent = <&intc>;
+ interrupts = <23>;
+
+ status = "disabled";
+ };
+
nemc: nemc@13410000 {
compatible = "ingenic,jz4780-nemc", "simple-mfd";
reg = <0x13410000 0x10000>;
--
2.33.0
From: Paul Boddie <[email protected]>
A specialisation of the generic Synopsys HDMI driver is employed for
JZ4780 HDMI support. This requires a new driver, plus device tree and
configuration modifications.
Here we add Kconfig DRM_INGENIC_DW_HDMI, Makefile and driver code.
Signed-off-by: Paul Boddie <[email protected]>
Signed-off-by: Ezequiel Garcia <[email protected]>
Signed-off-by: H. Nikolaus Schaller <[email protected]>
---
drivers/gpu/drm/ingenic/Kconfig | 9 ++
drivers/gpu/drm/ingenic/Makefile | 1 +
drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c | 138 ++++++++++++++++++++++
3 files changed, 148 insertions(+)
create mode 100644 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
diff --git a/drivers/gpu/drm/ingenic/Kconfig b/drivers/gpu/drm/ingenic/Kconfig
index 3b57f8be007c4..4efc709d77b0a 100644
--- a/drivers/gpu/drm/ingenic/Kconfig
+++ b/drivers/gpu/drm/ingenic/Kconfig
@@ -25,4 +25,13 @@ config DRM_INGENIC_IPU
The Image Processing Unit (IPU) will appear as a second primary plane.
+config DRM_INGENIC_DW_HDMI
+ tristate "Ingenic specific support for Synopsys DW HDMI"
+ depends on MACH_JZ4780
+ select DRM_DW_HDMI
+ help
+ Choose this option to enable Synopsys DesignWare HDMI based driver.
+ If you want to enable HDMI on Ingenic JZ4780 based SoC, you should
+ select this option..
+
endif
diff --git a/drivers/gpu/drm/ingenic/Makefile b/drivers/gpu/drm/ingenic/Makefile
index d313326bdddbb..f10cc1c5a5f22 100644
--- a/drivers/gpu/drm/ingenic/Makefile
+++ b/drivers/gpu/drm/ingenic/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_DRM_INGENIC) += ingenic-drm.o
ingenic-drm-y = ingenic-drm-drv.o
ingenic-drm-$(CONFIG_DRM_INGENIC_IPU) += ingenic-ipu.o
+obj-$(CONFIG_DRM_INGENIC_DW_HDMI) += ingenic-dw-hdmi.o
diff --git a/drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c b/drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
new file mode 100644
index 0000000000000..199e39c227d29
--- /dev/null
+++ b/drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2011-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2019, 2020 Paul Boddie <[email protected]>
+ *
+ * Derived from dw_hdmi-imx.c with i.MX portions removed.
+ * Probe and remove operations derived from rcar_dw_hdmi.c.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_of.h>
+#include <drm/drm_print.h>
+
+static const struct dw_hdmi_mpll_config ingenic_mpll_cfg[] = {
+ { 45250000, { { 0x01e0, 0x0000 }, { 0x21e1, 0x0000 }, { 0x41e2, 0x0000 } } },
+ { 92500000, { { 0x0140, 0x0005 }, { 0x2141, 0x0005 }, { 0x4142, 0x0005 } } },
+ { 148500000, { { 0x00a0, 0x000a }, { 0x20a1, 0x000a }, { 0x40a2, 0x000a } } },
+ { 216000000, { { 0x00a0, 0x000a }, { 0x2001, 0x000f }, { 0x4002, 0x000f } } },
+ { ~0UL, { { 0x0000, 0x0000 }, { 0x0000, 0x0000 }, { 0x0000, 0x0000 } } }
+};
+
+static const struct dw_hdmi_curr_ctrl ingenic_cur_ctr[] = {
+ /*pixelclk bpp8 bpp10 bpp12 */
+ { 54000000, { 0x091c, 0x091c, 0x06dc } },
+ { 58400000, { 0x091c, 0x06dc, 0x06dc } },
+ { 72000000, { 0x06dc, 0x06dc, 0x091c } },
+ { 74250000, { 0x06dc, 0x0b5c, 0x091c } },
+ { 118800000, { 0x091c, 0x091c, 0x06dc } },
+ { 216000000, { 0x06dc, 0x0b5c, 0x091c } },
+ { ~0UL, { 0x0000, 0x0000, 0x0000 } },
+};
+
+/*
+ * Resistance term 133Ohm Cfg
+ * PREEMP config 0.00
+ * TX/CK level 10
+ */
+static const struct dw_hdmi_phy_config ingenic_phy_config[] = {
+ /*pixelclk symbol term vlev */
+ { 216000000, 0x800d, 0x0005, 0x01ad},
+ { ~0UL, 0x0000, 0x0000, 0x0000}
+};
+
+static enum drm_mode_status
+ingenic_dw_hdmi_mode_valid(struct dw_hdmi *hdmi, void *data,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
+{
+ if (mode->clock < 13500)
+ return MODE_CLOCK_LOW;
+ /* FIXME: Hardware is capable of 270MHz, but setup data is missing. */
+ if (mode->clock > 216000)
+ return MODE_CLOCK_HIGH;
+
+ return MODE_OK;
+}
+
+static struct dw_hdmi_plat_data ingenic_dw_hdmi_plat_data = {
+ .mpll_cfg = ingenic_mpll_cfg,
+ .cur_ctr = ingenic_cur_ctr,
+ .phy_config = ingenic_phy_config,
+ .mode_valid = ingenic_dw_hdmi_mode_valid,
+ .output_port = 1,
+};
+
+static const struct of_device_id ingenic_dw_hdmi_dt_ids[] = {
+ { .compatible = "ingenic,jz4780-dw-hdmi" },
+ { /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ingenic_dw_hdmi_dt_ids);
+
+static void ingenic_dw_hdmi_cleanup(void *data)
+{
+ struct dw_hdmi *hdmi = (struct dw_hdmi *)data;
+
+ dw_hdmi_remove(hdmi);
+}
+
+static void ingenic_dw_hdmi_disable_regulator(void *data)
+{
+ struct regulator *regulator = (struct regulator *)data;
+
+ regulator_disable(regulator);
+}
+
+static int ingenic_dw_hdmi_probe(struct platform_device *pdev)
+{
+ struct dw_hdmi *hdmi;
+ struct regulator *regulator;
+ int ret;
+
+ hdmi = dw_hdmi_probe(pdev, &ingenic_dw_hdmi_plat_data);
+ if (IS_ERR(hdmi))
+ return PTR_ERR(hdmi);
+
+ ret = devm_add_action_or_reset(&pdev->dev, ingenic_dw_hdmi_cleanup, hdmi);
+ if (ret)
+ return ret;
+
+ regulator = devm_regulator_get_optional(&pdev->dev, "hdmi-5v");
+ if (IS_ERR(regulator)) {
+ ret = PTR_ERR(regulator);
+
+ DRM_DEV_ERROR(&pdev->dev, "failed to get hpd regulator: %s (%d)\n",
+ "hdmi-5v", ret);
+
+ return ret;
+ }
+
+ if (!regulator)
+ return 0;
+ ret = regulator_enable(regulator);
+ if (ret) {
+ DRM_DEV_ERROR(&pdev->dev, "Failed to enable hpd regulator: %d\n",
+ ret);
+
+ return ret;
+ }
+
+ return devm_add_action_or_reset(&pdev->dev, ingenic_dw_hdmi_disable_regulator,
+ regulator);
+}
+
+static struct platform_driver ingenic_dw_hdmi_driver = {
+ .probe = ingenic_dw_hdmi_probe,
+ .driver = {
+ .name = "dw-hdmi-ingenic",
+ .of_match_table = ingenic_dw_hdmi_dt_ids,
+ },
+};
+module_platform_driver(ingenic_dw_hdmi_driver);
+
+MODULE_DESCRIPTION("JZ4780 Specific DW-HDMI Driver Extension");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dwhdmi-ingenic");
--
2.33.0
From: Paul Boddie <[email protected]>
We need to hook up
* HDMI connector
* HDMI power regulator
* JZ4780_CLK_HDMI @ 27 MHz
* DDC pinmux
* HDMI and LCDC endpoint connections
Signed-off-by: Paul Boddie <[email protected]>
Signed-off-by: H. Nikolaus Schaller <[email protected]>
---
arch/mips/boot/dts/ingenic/ci20.dts | 72 ++++++++++++++++++++++++++++-
1 file changed, 70 insertions(+), 2 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index b249a4f0f6b62..3e336b3dbb109 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -78,6 +78,18 @@ eth0_power: fixedregulator@0 {
enable-active-high;
};
+ hdmi_out: connector {
+ compatible = "hdmi-connector";
+ label = "HDMI OUT";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&dw_hdmi_out>;
+ };
+ };
+ };
+
ir: ir {
compatible = "gpio-ir-receiver";
gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
@@ -102,6 +114,17 @@ otg_power: fixedregulator@2 {
gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
enable-active-high;
};
+
+ hdmi_power: fixedregulator@3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "hdmi_power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpa 25 0>;
+ enable-active-high;
+ };
};
&ext {
@@ -114,11 +137,12 @@ &cgu {
* precision.
*/
assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>,
- <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>;
+ <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>,
+ <&cgu JZ4780_CLK_HDMI>;
assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>,
<&cgu JZ4780_CLK_MPLL>,
<&cgu JZ4780_CLK_SSIPLL>;
- assigned-clock-rates = <48000000>, <0>, <54000000>;
+ assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>;
};
&tcu {
@@ -509,6 +533,12 @@ pins_i2c4: i2c4 {
bias-disable;
};
+ pins_hdmi_ddc: hdmi_ddc {
+ function = "hdmi-ddc";
+ groups = "hdmi-ddc";
+ bias-disable;
+ };
+
pins_nemc: nemc {
function = "nemc";
groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
@@ -539,3 +569,41 @@ pins_mmc1: mmc1 {
bias-disable;
};
};
+
+&hdmi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_hdmi_ddc>;
+
+ hdmi-5v-supply = <&hdmi_power>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dw_hdmi_in: endpoint {
+ remote-endpoint = <&lcd_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dw_hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+};
+
+&lcdc0 {
+ status = "okay";
+
+ port {
+ lcd_out: endpoint {
+ remote-endpoint = <&dw_hdmi_in>;
+ };
+ };
+};
--
2.33.0
Enable CONFIG options as modules.
Signed-off-by: Ezequiel Garcia <[email protected]>
Signed-off-by: H. Nikolaus Schaller <[email protected]>
---
arch/mips/configs/ci20_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index ab7ebb0668340..cc69b215854ea 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -98,7 +98,13 @@ CONFIG_RC_DEVICES=y
CONFIG_IR_GPIO_CIR=m
CONFIG_IR_GPIO_TX=m
CONFIG_MEDIA_SUPPORT=m
+CONFIG_DRM=m
+CONFIG_DRM_INGENIC=m
+CONFIG_DRM_INGENIC_DW_HDMI=m
+CONFIG_DRM_DISPLAY_CONNECTOR=m
# CONFIG_VGA_CONSOLE is not set
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_HID is not set
CONFIG_USB=y
CONFIG_USB_STORAGE=y
--
2.33.0
After getting the regmap size from the device tree we should
reduce the ranges to the really available registers. This
allows to read only existing registers from the debug fs
and makes the regmap check out-of-bounds access.
For the jz4780 we have done this already.
Suggested-for: Paul Cercueil <[email protected]>
Signed-off-by: H. Nikolaus Schaller <[email protected]>
---
arch/mips/boot/dts/ingenic/jz4725b.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/boot/dts/ingenic/jz4725b.dtsi b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
index 0c6a5a4266f43..e9e48022f6316 100644
--- a/arch/mips/boot/dts/ingenic/jz4725b.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
@@ -321,7 +321,7 @@ udc: usb@13040000 {
lcd: lcd-controller@13050000 {
compatible = "ingenic,jz4725b-lcd";
- reg = <0x13050000 0x1000>;
+ reg = <0x13050000 0x130>; /* tbc */
interrupt-parent = <&intc>;
interrupts = <31>;
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 772542e1f266a..7f76cba03a089 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -323,7 +323,7 @@ udc: usb@13040000 {
lcd: lcd-controller@13050000 {
compatible = "ingenic,jz4740-lcd";
- reg = <0x13050000 0x1000>;
+ reg = <0x13050000 0x60>; /* LCDCMD1+4 */
interrupt-parent = <&intc>;
interrupts = <30>;
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index dfe74328ae5dc..bda0a3a86ed5f 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -399,7 +399,7 @@ gpu: gpu@13040000 {
lcd: lcd-controller@13050000 {
compatible = "ingenic,jz4770-lcd";
- reg = <0x13050000 0x300>;
+ reg = <0x13050000 0x130>; /* tbc */
interrupt-parent = <&intc>;
interrupts = <31>;
--
2.33.0