Recently I got a Caldigit TS3 Thunderbolt 3 dock, and noticed that upon
hotplugging my kernel would immediately crash due to igb:
[ 680.825801] kernel BUG at drivers/pci/msi.c:352!
[ 680.828388] invalid opcode: 0000 [#1] SMP
[ 680.829194] Modules linked in: igb(O) thunderbolt i2c_algo_bit joydev vfat fat btusb btrtl btbcm btintel bluetooth ecdh_generic hp_wmi sparse_keymap rfkill wmi_bmof iTCO_wdt intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul snd_pcm rtsx_pci_ms mei_me snd_timer memstick snd pcspkr mei soundcore i2c_i801 tpm_tis psmouse shpchp wmi tpm_tis_core tpm video hp_wireless acpi_pad rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci mfd_core xhci_pci xhci_hcd i2c_hid i2c_core [last unloaded: igb]
[ 680.831085] CPU: 1 PID: 78 Comm: kworker/u16:1 Tainted: G O 4.15.0-rc3Lyude-Test+ #6
[ 680.831596] Hardware name: HP HP ZBook Studio G4/826B, BIOS P71 Ver. 01.03 06/09/2017
[ 680.832168] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[ 680.832687] RIP: 0010:free_msi_irqs+0x180/0x1b0
[ 680.833271] RSP: 0018:ffffc9000030fbf0 EFLAGS: 00010286
[ 680.833761] RAX: ffff8803405f9c00 RBX: ffff88033e3d2e40 RCX: 000000000000002c
[ 680.834278] RDX: 0000000000000000 RSI: 00000000000000ac RDI: ffff880340be2178
[ 680.834832] RBP: 0000000000000000 R08: ffff880340be1ff0 R09: ffff8803405f9c00
[ 680.835342] R10: 0000000000000000 R11: 0000000000000040 R12: ffff88033d63a298
[ 680.835822] R13: ffff88033d63a000 R14: 0000000000000060 R15: ffff880341959000
[ 680.836332] FS: 0000000000000000(0000) GS:ffff88034f440000(0000) knlGS:0000000000000000
[ 680.836817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 680.837360] CR2: 000055e64044afdf CR3: 0000000001c09002 CR4: 00000000003606e0
[ 680.837954] Call Trace:
[ 680.838853] pci_disable_msix+0xce/0xf0
[ 680.839616] igb_reset_interrupt_capability+0x5d/0x60 [igb]
[ 680.840278] igb_remove+0x9d/0x110 [igb]
[ 680.840764] pci_device_remove+0x36/0xb0
[ 680.841279] device_release_driver_internal+0x157/0x220
[ 680.841739] pci_stop_bus_device+0x7d/0xa0
[ 680.842255] pci_stop_bus_device+0x2b/0xa0
[ 680.842722] pci_stop_bus_device+0x3d/0xa0
[ 680.843189] pci_stop_and_remove_bus_device+0xe/0x20
[ 680.843627] trim_stale_devices+0xf3/0x140
[ 680.844086] trim_stale_devices+0x94/0x140
[ 680.844532] trim_stale_devices+0xa6/0x140
[ 680.845031] ? get_slot_status+0x90/0xc0
[ 680.845536] acpiphp_check_bridge.part.5+0xfe/0x140
[ 680.846021] acpiphp_hotplug_notify+0x175/0x200
[ 680.846581] ? free_bridge+0x100/0x100
[ 680.847113] acpi_device_hotplug+0x8a/0x490
[ 680.847535] acpi_hotplug_work_fn+0x1a/0x30
[ 680.848076] process_one_work+0x182/0x3a0
[ 680.848543] worker_thread+0x2e/0x380
[ 680.848963] ? process_one_work+0x3a0/0x3a0
[ 680.849373] kthread+0x111/0x130
[ 680.849776] ? kthread_create_worker_on_cpu+0x50/0x50
[ 680.850188] ret_from_fork+0x1f/0x30
[ 680.850601] Code: 43 14 85 c0 0f 84 d5 fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f 86 c5 fe ff ff 8b 7b 10 01 ef e8 b7 e4 d2 ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5 a0 00 00 00 e8 62 6f d3 ff e9 c7 fe ff ff 48 8b
[ 680.851497] RIP: free_msi_irqs+0x180/0x1b0 RSP: ffffc9000030fbf0
As it turns out, normally the freeing of IRQs that would fix this is called
inside of the scope of __igb_close(). However, since the device is
already gone by the point we try to unregister the netdevice from the
driver due to a hotplug we end up seeing that the netif isn't present
and thus, forget to free any of the device IRQs.
So: make sure that if we're in the process of dismantling the netdev, we
always allow __igb_close() to be called so that IRQs may be freed
normally. Additionally, only allow igb_close() to be called from
__igb_close() if it hasn't already been called for the given adapter.
Signed-off-by: Lyude Paul <[email protected]>
Fixes: 9474933caf21 ("igb: close/suspend race in netif_device_detach")
Cc: Todd Fujinaka <[email protected]>
Cc: Stephen Hemminger <[email protected]>
Cc: [email protected]
---
Changes since v2:
- Remove hunk in __igb_close() that was left over by accident, it's
not needed
drivers/net/ethernet/intel/igb/igb_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index c208753ff5b7..c69a5b3ae8c8 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3676,7 +3676,7 @@ static int __igb_close(struct net_device *netdev, bool suspending)
int igb_close(struct net_device *netdev)
{
- if (netif_device_present(netdev))
+ if (netif_device_present(netdev) || netdev->dismantle)
return __igb_close(netdev, false);
return 0;
}
--
2.14.3
> From: [email protected] [mailto:netdev-
> [email protected]] On Behalf Of Lyude Paul
> Sent: Tuesday, December 12, 2017 11:32 AM
> To: [email protected]
> Cc: Fujinaka, Todd <[email protected]>; Stephen Hemminger
> <[email protected]>; [email protected]; Kirsher, Jeffrey T
> <[email protected]>; [email protected]; linux-
> [email protected]
> Subject: [PATCH v3] igb: Free IRQs when device is hotplugged
>
> Recently I got a Caldigit TS3 Thunderbolt 3 dock, and noticed that upon
> hotplugging my kernel would immediately crash due to igb:
>
> [ 680.825801] kernel BUG at drivers/pci/msi.c:352!
> [ 680.828388] invalid opcode: 0000 [#1] SMP
> [ 680.829194] Modules linked in: igb(O) thunderbolt i2c_algo_bit joydev vfat
> fat btusb btrtl btbcm btintel bluetooth ecdh_generic hp_wmi
> sparse_keymap rfkill wmi_bmof iTCO_wdt intel_rapl
> x86_pkg_temp_thermal coretemp crc32_pclmul snd_pcm rtsx_pci_ms
> mei_me snd_timer memstick snd pcspkr mei soundcore i2c_i801 tpm_tis
> psmouse shpchp wmi tpm_tis_core tpm video hp_wireless acpi_pad
> rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci mfd_core
> xhci_pci xhci_hcd i2c_hid i2c_core [last unloaded: igb]
> [ 680.831085] CPU: 1 PID: 78 Comm: kworker/u16:1 Tainted: G O
> 4.15.0-rc3Lyude-Test+ #6
> [ 680.831596] Hardware name: HP HP ZBook Studio G4/826B, BIOS P71 Ver.
> 01.03 06/09/2017
> [ 680.832168] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
> [ 680.832687] RIP: 0010:free_msi_irqs+0x180/0x1b0
> [ 680.833271] RSP: 0018:ffffc9000030fbf0 EFLAGS: 00010286
> [ 680.833761] RAX: ffff8803405f9c00 RBX: ffff88033e3d2e40 RCX:
> 000000000000002c
> [ 680.834278] RDX: 0000000000000000 RSI: 00000000000000ac RDI:
> ffff880340be2178
> [ 680.834832] RBP: 0000000000000000 R08: ffff880340be1ff0 R09:
> ffff8803405f9c00
> [ 680.835342] R10: 0000000000000000 R11: 0000000000000040 R12:
> ffff88033d63a298
> [ 680.835822] R13: ffff88033d63a000 R14: 0000000000000060 R15:
> ffff880341959000
> [ 680.836332] FS: 0000000000000000(0000) GS:ffff88034f440000(0000)
> knlGS:0000000000000000
> [ 680.836817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 680.837360] CR2: 000055e64044afdf CR3: 0000000001c09002 CR4:
> 00000000003606e0
> [ 680.837954] Call Trace:
> [ 680.838853] pci_disable_msix+0xce/0xf0
> [ 680.839616] igb_reset_interrupt_capability+0x5d/0x60 [igb]
> [ 680.840278] igb_remove+0x9d/0x110 [igb]
> [ 680.840764] pci_device_remove+0x36/0xb0
> [ 680.841279] device_release_driver_internal+0x157/0x220
> [ 680.841739] pci_stop_bus_device+0x7d/0xa0
> [ 680.842255] pci_stop_bus_device+0x2b/0xa0
> [ 680.842722] pci_stop_bus_device+0x3d/0xa0
> [ 680.843189] pci_stop_and_remove_bus_device+0xe/0x20
> [ 680.843627] trim_stale_devices+0xf3/0x140
> [ 680.844086] trim_stale_devices+0x94/0x140
> [ 680.844532] trim_stale_devices+0xa6/0x140
> [ 680.845031] ? get_slot_status+0x90/0xc0
> [ 680.845536] acpiphp_check_bridge.part.5+0xfe/0x140
> [ 680.846021] acpiphp_hotplug_notify+0x175/0x200
> [ 680.846581] ? free_bridge+0x100/0x100
> [ 680.847113] acpi_device_hotplug+0x8a/0x490
> [ 680.847535] acpi_hotplug_work_fn+0x1a/0x30
> [ 680.848076] process_one_work+0x182/0x3a0
> [ 680.848543] worker_thread+0x2e/0x380
> [ 680.848963] ? process_one_work+0x3a0/0x3a0
> [ 680.849373] kthread+0x111/0x130
> [ 680.849776] ? kthread_create_worker_on_cpu+0x50/0x50
> [ 680.850188] ret_from_fork+0x1f/0x30
> [ 680.850601] Code: 43 14 85 c0 0f 84 d5 fe ff ff 31 ed eb 0f 83 c5 01 39 6b 14 0f
> 86 c5 fe ff ff 8b 7b 10 01 ef e8 b7 e4 d2 ff 48 83 78 70 00 74 e3 <0f> 0b 49 8d b5
> a0 00 00 00 e8 62 6f d3 ff e9 c7 fe ff ff 48 8b
> [ 680.851497] RIP: free_msi_irqs+0x180/0x1b0 RSP: ffffc9000030fbf0
>
> As it turns out, normally the freeing of IRQs that would fix this is called
> inside of the scope of __igb_close(). However, since the device is
> already gone by the point we try to unregister the netdevice from the
> driver due to a hotplug we end up seeing that the netif isn't present
> and thus, forget to free any of the device IRQs.
>
> So: make sure that if we're in the process of dismantling the netdev, we
> always allow __igb_close() to be called so that IRQs may be freed
> normally. Additionally, only allow igb_close() to be called from
> __igb_close() if it hasn't already been called for the given adapter.
>
> Signed-off-by: Lyude Paul <[email protected]>
> Fixes: 9474933caf21 ("igb: close/suspend race in netif_device_detach")
> Cc: Todd Fujinaka <[email protected]>
> Cc: Stephen Hemminger <[email protected]>
> Cc: [email protected]
> ---
> Changes since v2:
> - Remove hunk in __igb_close() that was left over by accident, it's
> not needed
>
> drivers/net/ethernet/intel/igb/igb_main.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Tested-by: Aaron Brown <[email protected]>