2023-12-11 10:51:01

by Andy Yan

[permalink] [raw]
Subject: [PATCH v3 0/5] Add 2 rk3588 based boards from Cool Pi


This series add support for rk3588s based SBC Cool Pi 4B
and rk3588 based board Cool Pi CM5 EVB

Changes in v3:
- drop ununnecessary property status = "okay" for rtc
- drop ununnecessary property status = "okay" for backlight
- reorder some nodes alphabetical
- drop ununnecessary blank line

Changes in v2:
- change board compatible from "CoolPi 4 Model B" to "coolpi,pi-4b"
- drop ununnecessary property status = "okay" for gpio-led
- drop ununnecessary blank line
- change node name to rtc for hym8563
- change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"

Andy Yan (5):
dt-bindings: vendor-prefixes: Add Cool Pi
dt-bindings: arm: rockchip: Add Cool Pi 4B
arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B
dt-bindings: arm: rockchip: Add Cool Pi CM5 EVB
arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5
EVB

.../devicetree/bindings/arm/rockchip.yaml | 10 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/rockchip/Makefile | 2 +
.../dts/rockchip/rk3588-coolpi-cm5-evb.dts | 879 ++++++++++++++++++
.../boot/dts/rockchip/rk3588s-coolpi-4b.dts | 823 ++++++++++++++++
5 files changed, 1716 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts

--
2.34.1


2023-12-11 10:51:16

by Andy Yan

[permalink] [raw]
Subject: [PATCH v3 2/5] dt-bindings: arm: rockchip: Add Cool Pi 4B

Add Cool Pi 4B, a SBC powered by RK3588S

Signed-off-by: Andy Yan <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>

---

(no changes since v2)

Changes in v2:
- change board compatible from "CoolPi 4 Model B" to "coolpi,pi-4b"

Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 5deb66a5c7d9..11d03035f3db 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -95,6 +95,11 @@ properties:
- const: chipspark,rayeager-px2
- const: rockchip,rk3066a

+ - description: Cool Pi 4 Model B
+ items:
+ - const: coolpi,pi-4b
+ - const: rockchip,rk3588s
+
- description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
items:
- const: edgeble,neural-compute-module-2-io # Edgeble Neural Compute Module 2 IO Board
--
2.34.1

2023-12-11 10:51:31

by Andy Yan

[permalink] [raw]
Subject: [PATCH v3 1/5] dt-bindings: vendor-prefixes: Add Cool Pi

Add vendor prefix for Cool Pi(https://cool-pi.com/)

Signed-off-by: Andy Yan <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>

---

(no changes since v1)

Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 309b94c328c8..ddbba46fcbad 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -294,6 +294,8 @@ patternProperties:
description: CompuLab Ltd.
"^congatec,.*":
description: congatec GmbH
+ "^coolpi,.*":
+ description: cool-pi.com
"^coreriver,.*":
description: CORERIVER Semiconductor Co.,Ltd.
"^corpro,.*":
--
2.34.1

2023-12-11 10:51:32

by Andy Yan

[permalink] [raw]
Subject: [PATCH v3 3/5] arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B

CoolPi 4B is a rk3588s based SBC.
Specification:
- Rockchip RK3588S
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet drived by PCIE with RTL8111HS
- HDMI Type D out
- Mini DP out
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- WIFI/BT module AIC8800
- 40 pin header

Signed-off-by: Andy Yan <[email protected]>

arm64: dts: rockchip: Add support for rk3588s based board Cool Pi 4B

---

Changes in v3:
- drop ununnecessary property status = "okay" for rtc
- reorder some nodes alphabetical
- remove disabled node

Changes in v2:
- change board compatible from "CoolPi 4 Model B" to "coolpi,pi-4b"
- drop ununnecessary property status = "okay" for gpio-led
- drop ununnecessary blank line
- change node name to rtc for hym8563

arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3588s-coolpi-4b.dts | 823 ++++++++++++++++++
2 files changed, 824 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 41276ca535de..e59682691eb0 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
new file mode 100644
index 000000000000..50b3caae0151
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
@@ -0,0 +1,823 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+ model = "RK3588S CoolPi 4 Model B";
+ compatible = "coolpi,pi-4b", "rockchip,rk3588s";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdio;
+ mmc2 = &sdmmc;
+ serial2 = &uart2;
+ };
+
+ analog-sound {
+ compatible = "audio-graph-card";
+ label = "rk3588-es8316";
+
+ widgets = "Microphone", "Mic Jack",
+ "Headphone", "Headphones";
+
+ routing = "MIC2", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR";
+
+ dais = <&i2s0_8ch_p0>;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl- = <&gpio_leds>;
+
+ led0: led-green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1: led-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_WLAN;
+ gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&hym8563>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usbdcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usbdcin>;
+ };
+
+ avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd0v85_pcie20";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ vin-supply = <&vdd_0v85_s0>;
+ };
+
+ avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd1v8_pcie20";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&avcc_1v8_s0>;
+ };
+
+ vcc3v3_mipi: vcc3v3-mipi-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_mipi";
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_otg: vcc5v0-otg-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_otg";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_u3host_en>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v1_nldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c6 {
+ pinctrl-0 = <&i2c6m3_xfer>;
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "hym8563";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c7 {
+ pinctrl-0 = <&i2c7m0_xfer>;
+ status = "okay";
+
+ es8316: audio-codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ clock-names = "mclk";
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s0_8ch_p0_0>;
+ };
+ };
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+
+ i2s0_8ch_p0: port {
+ i2s0_8ch_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
+};
+
+&pcie2x1l2 {
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8111_isolate>;
+ status = "okay";
+};
+
+&pinctrl {
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ led {
+ gpio_leds: gpio-leds {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>,
+ <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ rtl8111 {
+ rtl8111_isolate: rtl8111-isolate {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,
+ <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vcc5v0_u3host_en: vcc5v0-u3host-en {
+ rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wireless-bluetooth {
+ uart9_gpios: uart9-gpios {
+ rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_reset_gpio: bt-reset-gpio {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_gpio: bt-wake-gpio {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host_irq: bt-wake-host-irq {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ wireless-wlan {
+ wifi_host_wake_irq: wifi-host-wake-irq {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ wifi_poweren_gpio: wifi-poweren-gpio {
+ rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm2 {
+ pinctrl-0 = <&pwm2m1_pins>;
+ status = "okay";
+};
+
+&pwm13 {
+ pinctrl-names = "active";
+ pinctrl-0 = <&pwm13m2_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8_s0>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&sdio {
+ max-frequency = <150000000>;
+ no-sd;
+ no-mmc;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_gpio>;
+ status = "okay";
+};
+
+&sdmmc {
+ max-frequency = <150000000>;
+ no-sdio;
+ no-mmc;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_3v3_s3>;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&spi2 {
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ num-cs = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ status = "okay";
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ reg = <0x0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+ spi-max-frequency = <1000000>;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_1v1_nldo_s3>;
+ vcc14-supply = <&vcc_1v1_nldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-name = "vdd_gpu_s0";
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-name = "vdd_cpu_lit_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-name = "vdd_log_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-name = "vdd_vdenc_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-name = "vdd_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-name = "vdd2_ddr_s3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-name = "vdd_2v0_pldo_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-name = "vcc_3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-name = "vddq_ddr_s0";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-name = "vcc_1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-name = "avcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-name = "vcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-name = "avdd_1v2_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-name = "vcc_3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-name = "vccio_sd_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-name = "pldo6_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-name = "vdd_0v75_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-name = "vdd_ddr_pll_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-name = "avdd_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-name = "vdd_0v85_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-name = "vdd_0v75_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy3_host {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+/* bt */
+&uart9 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
--
2.34.1

2023-12-11 10:51:35

by Andy Yan

[permalink] [raw]
Subject: [PATCH v3 4/5] dt-bindings: arm: rockchip: Add Cool Pi CM5 EVB

Add Cool Pi CM5 EVB, a board powered by RK3588

Signed-off-by: Andy Yan <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>

---

(no changes since v2)

Changes in v2:
- change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"

Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 11d03035f3db..4da83bbd642a 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -95,6 +95,11 @@ properties:
- const: chipspark,rayeager-px2
- const: rockchip,rk3066a

+ - description: Cool Pi Compute Module 5(CM5) EVB
+ items:
+ - const: coolpi,pi-cm5-evb
+ - const: rockchip,rk3588
+
- description: Cool Pi 4 Model B
items:
- const: coolpi,pi-4b
--
2.34.1

2023-12-11 10:52:06

by Andy Yan

[permalink] [raw]
Subject: [PATCH v3 5/5] arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB

Cool Pi CM5 EVB is a board based on rk3588.

Specification:
- Rockchip RK3588
- LPDDR4 2/4/8/16 GB
- TF scard slot
- eMMC 8/32/64/128 GB module
- Gigabit ethernet x 1 with PHY YT8531
- Gigabit ethernet x 1 drived by PCIE with YT6801S
- HDMI Type A out x 2
- HDMI Type D in x 1
- USB 2.0 Host x 2
- USB 3.0 OTG x 1
- USB 3.0 Host x 1
- PCIE M.2 E Key for Wireless connection
- PCIE M.2 M Key for NVME connection
- 40 pin header

Signed-off-by: Andy Yan <[email protected]>

---

Changes in v3:
- drop ununnecessary property status = "okay" for backlight
- reorder some nodes alphabetical
- drop ununnecessary blank line

Changes in v2:
- change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"

arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3588-coolpi-cm5-evb.dts | 879 ++++++++++++++++++
2 files changed, 880 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index e59682691eb0..9be8e4830158 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
new file mode 100644
index 000000000000..ccf17185dc10
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
@@ -0,0 +1,879 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+ model = "RK3588 CoolPi CM5 EVB";
+ compatible = "coolpi,pi-cm5-evb", "rockchip,rk3588";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdio;
+ mmc2 = &sdmmc;
+ serial2 = &uart2;
+ };
+
+ analog-sound {
+ compatible = "audio-graph-card";
+ label = "rk3588-es8316";
+
+ widgets = "Microphone", "Mic Jack",
+ "Headphone", "Headphones";
+
+ routing = "MIC2", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR";
+
+ dais = <&i2s0_8ch_p0>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&vcc12v_dcin>;
+ pwms = <&pwm2 0 25000 0>;
+ enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en>;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led: led-green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc3v3_lcd: vcc3v3-lcd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_lcd";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdpwr_en>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ avdd0v85_pcie20: avdd0v85-pcie20-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd0v85_pcie20";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ vin-supply = <&vdd_0v85_s0>;
+ };
+
+ avdd1v8_pcie20: avdd1v8-pcie20-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd1v8_pcie20";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&avcc_1v8_s0>;
+ };
+
+ avdd0v75_pcie30: avdd0v75-pcie30-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd0v75_pcie30";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ vin-supply = <&avdd_0v75_s0>;
+ };
+
+ pcie30_avdd1v8: avdd1v8-pcie30-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie30_avdd1v8";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&avcc_1v8_s0>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_host";
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host1_en>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_otg: vcc5v0-otg-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_otg";
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&typec5v_pwren>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_mipidphy0: vcc-mipi-dphy0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_mipidphy0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ enable-active-high;
+ gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc5v0_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cam_en>;
+ };
+};
+
+&combphy0_ps {
+ status = "okay";
+};
+
+&combphy1_ps {
+ status = "okay";
+};
+
+&combphy2_psu {
+ status = "okay";
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+ cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii-rxid";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_tx_bus2
+ &gmac0_rx_bus2
+ &gmac0_rgmii_clk
+ &gmac0_rgmii_bus>;
+ pinctrl-names = "default";
+ rx_delay = <0x00>;
+ tx_delay = <0x43>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0m2_xfer>;
+ status = "okay";
+
+ vdd_cpu_big0_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big0_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_big1_s0: regulator@43 {
+ compatible = "rockchip,rk8603", "rockchip,rk8602";
+ reg = <0x43>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_big1_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ vdd_npu_s0: regulator@42 {
+ compatible = "rockchip,rk8602";
+ reg = <0x42>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_npu_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ hym8563: rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "hym8563";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hym8563_int>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+ };
+};
+
+&i2c7 {
+ pinctrl-0 = <&i2c7m0_xfer>;
+ status = "okay";
+
+ es8316: audio-codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <&cru I2S0_8CH_MCLKOUT>;
+ clock-names = "mclk";
+ assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s0_8ch_p0_0>;
+ };
+ };
+ };
+};
+
+&i2s0_8ch {
+ pinctrl-0 = <&i2s0_lrck
+ &i2s0_mclk
+ &i2s0_sclk
+ &i2s0_sdi0
+ &i2s0_sdo0>;
+ status = "okay";
+
+ i2s0_8ch_p0: port {
+ i2s0_8ch_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
+};
+
+&mdio0 {
+ rgmii_phy: ethernet-phy@1 {
+ /* YT8531C/H */
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&yt8531_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* M.2 E-Key */
+&pcie2x1l1 {
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
+ status = "okay";
+};
+
+/* ethernet */
+&pcie2x1l2 {
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtl8111_isolate>;
+ status = "okay";
+};
+
+&pcie30phy {
+ status = "okay";
+};
+
+&pcie3x2 {
+ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+ status = "okay";
+};
+
+/* M.2 M-Kye ssd */
+&pcie3x4 {
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_sys>;
+ status = "okay";
+};
+
+&pinctrl {
+ cam {
+ cam_en: cam-en {
+ rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ hym8563 {
+ hym8563_int: hym8563-int {
+ rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ lcd {
+ lcdpwr_en: lcdpwr-en {
+ rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bl_en: bl-en {
+ rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rtl8111 {
+ rtl8111_isolate: rtl8111-isolate {
+ rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ rtl8211f {
+ yt8531_rst: yt8531-rst {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_host1_en: vcc5v0-host1-en {
+ rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb-typec {
+ typec5v_pwren: typec5v-pwren {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wifi {
+ bt_pwron: bt-pwron {
+ rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pcie_clkreq: pcie-clkreq {
+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pcie_rst: pcie-rst {
+ rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ wifi_pwron: wifi-pwron {
+ rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ pcie_wake: pcie-wake {
+ rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8_s0>;
+ status = "okay";
+};
+
+&sata1 {
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&sdmmc {
+ max-frequency = <150000000>;
+ no-sdio;
+ no-mmc;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd_s0>;
+ status = "okay";
+};
+
+&spi2 {
+ status = "okay";
+ assigned-clocks = <&cru CLK_SPI2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+ num-cs = <1>;
+
+ pmic@0 {
+ compatible = "rockchip,rk806";
+ spi-max-frequency = <1000000>;
+ reg = <0x0>;
+
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+ <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc5v0_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc_2v0_pldo_s3>;
+ vcc12-supply = <&vcc5v0_sys>;
+ vcc13-supply = <&vcc_2v0_pldo_s3>;
+ vcc14-supply = <&vcc_2v0_pldo_s3>;
+ vcca-supply = <&vcc5v0_sys>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk806_dvs1_null: dvs1-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs2_null: dvs2-null-pins {
+ pins = "gpio_pwrctrl2";
+ function = "pin_fun0";
+ };
+
+ rk806_dvs3_null: dvs3-null-pins {
+ pins = "gpio_pwrctrl3";
+ function = "pin_fun0";
+ };
+
+ regulators {
+ vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_gpu_s0";
+ regulator-enable-ramp-delay = <400>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_cpu_lit_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_log_s0: dcdc-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <750000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_log_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <550000>;
+ regulator-max-microvolt = <950000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_vdenc_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_ddr_s0: dcdc-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ vdd2_ddr_s3: dcdc-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd2_ddr_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_2v0_pldo_s3: dcdc-reg7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vdd_2v0_pldo_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2000000>;
+ };
+ };
+
+ vcc_3v3_s3: dcdc-reg8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_3v3_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vddq_ddr_s0: dcdc-reg9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vddq_ddr_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s3: dcdc-reg10 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avcc_1v8_s0: pldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "avcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_1v8_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ avdd_1v2_s0: pldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "avdd_1v2_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3_s0: pldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vcc_3v3_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd_s0: pldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-ramp-delay = <12500>;
+ regulator-name = "vccio_sd_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ pldo6_s3: pldo-reg6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "pldo6_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_0v75_s3: nldo-reg1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s3";
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <750000>;
+ };
+ };
+
+ vdd_ddr_pll_s0: nldo-reg2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_ddr_pll_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <850000>;
+ };
+ };
+
+ avdd_0v75_s0: nldo-reg3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "avdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v85_s0: nldo-reg4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-name = "vdd_0v85_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_0v75_s0: nldo-reg5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-name = "vdd_0v75_s0";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy2 {
+ status = "okay";
+};
+
+&u2phy3 {
+ status = "okay";
+};
+
+&u2phy2_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy3_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
--
2.34.1

2023-12-11 12:28:05

by Heiko Stübner

[permalink] [raw]
Subject: Re: [PATCH v3 4/5] dt-bindings: arm: rockchip: Add Cool Pi CM5 EVB

Hi Andy,

Am Montag, 11. Dezember 2023, 11:50:23 CET schrieb Andy Yan:
> Add Cool Pi CM5 EVB, a board powered by RK3588
>
> Signed-off-by: Andy Yan <[email protected]>
> Acked-by: Krzysztof Kozlowski <[email protected]>

I just realized your mention of this being a som + baseboard combination
in the previous version.

In that case the compatible really should reflect that.

- description: Cool Pi Compute Module 5(CM5) EVB
items:
- const: coolpi,pi-cm5-evb
- const: coolpi,pi-cm5
- const: rockchip,rk3588

Similar to how all the other som + baseboard combinations do it
(Edgeble neural modules, engicam px30, Thebroma-SoMs).


Thanks
Heiko

> ---
>
> (no changes since v2)
>
> Changes in v2:
> - change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"
>
> Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
> index 11d03035f3db..4da83bbd642a 100644
> --- a/Documentation/devicetree/bindings/arm/rockchip.yaml
> +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
> @@ -95,6 +95,11 @@ properties:
> - const: chipspark,rayeager-px2
> - const: rockchip,rk3066a
>
> + - description: Cool Pi Compute Module 5(CM5) EVB
> + items:
> + - const: coolpi,pi-cm5-evb
> + - const: rockchip,rk3588
> +
> - description: Cool Pi 4 Model B
> items:
> - const: coolpi,pi-4b
>




2023-12-11 12:33:35

by Heiko Stübner

[permalink] [raw]
Subject: Re: [PATCH v3 5/5] arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB

Am Montag, 11. Dezember 2023, 11:50:43 CET schrieb Andy Yan:
> Cool Pi CM5 EVB is a board based on rk3588.
>
> Specification:
> - Rockchip RK3588
> - LPDDR4 2/4/8/16 GB
> - TF scard slot
> - eMMC 8/32/64/128 GB module
> - Gigabit ethernet x 1 with PHY YT8531
> - Gigabit ethernet x 1 drived by PCIE with YT6801S
> - HDMI Type A out x 2
> - HDMI Type D in x 1
> - USB 2.0 Host x 2
> - USB 3.0 OTG x 1
> - USB 3.0 Host x 1
> - PCIE M.2 E Key for Wireless connection
> - PCIE M.2 M Key for NVME connection
> - 40 pin header
>
> Signed-off-by: Andy Yan <[email protected]>

In the overall scheme of things I would really like to see the correct
split between SoM dtsi and baseboard dts, like the other SoMs do.

You said you wanted to wait for an actual second baseboard to come along
before doing this and I guess for "yet another som" we can try going that
route.

But please state this explicitly in the commit message that this is a
baseboard+som combination, so the next one working here should do
that split.

An update is needed anyway, cause the compatible thing mentioned in
the binding.


Thanks
Heiko

> ---
>
> Changes in v3:
> - drop ununnecessary property status = "okay" for backlight
> - reorder some nodes alphabetical
> - drop ununnecessary blank line
>
> Changes in v2:
> - change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"
>
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../dts/rockchip/rk3588-coolpi-cm5-evb.dts | 879 ++++++++++++++++++
> 2 files changed, 880 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index e59682691eb0..9be8e4830158 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
> new file mode 100644
> index 000000000000..ccf17185dc10
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
> @@ -0,0 +1,879 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rk3588.dtsi"
> +
> +/ {
> + model = "RK3588 CoolPi CM5 EVB";
> + compatible = "coolpi,pi-cm5-evb", "rockchip,rk3588";
> +
> + aliases {
> + mmc0 = &sdhci;
> + mmc1 = &sdio;
> + mmc2 = &sdmmc;
> + serial2 = &uart2;
> + };
> +
> + analog-sound {
> + compatible = "audio-graph-card";
> + label = "rk3588-es8316";
> +
> + widgets = "Microphone", "Mic Jack",
> + "Headphone", "Headphones";
> +
> + routing = "MIC2", "Mic Jack",
> + "Headphones", "HPOL",
> + "Headphones", "HPOR";
> +
> + dais = <&i2s0_8ch_p0>;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + power-supply = <&vcc12v_dcin>;
> + pwms = <&pwm2 0 25000 0>;
> + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bl_en>;
> + };
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + leds: leds {
> + compatible = "gpio-leds";
> +
> + led: led-green {
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_STATUS;
> + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + vcc12v_dcin: vcc12v-dcin-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc12v_dcin";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <12000000>;
> + regulator-max-microvolt = <12000000>;
> + };
> +
> + vcc5v0_sys: vcc5v0-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +
> + vcc3v3_sys: vcc3v3-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&vcc12v_dcin>;
> + };
> +
> + vcc3v3_lcd: vcc3v3-lcd-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3_lcd";
> + enable-active-high;
> + gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&lcdpwr_en>;
> + vin-supply = <&vcc3v3_sys>;
> + };
> +
> + avdd0v85_pcie20: avdd0v85-pcie20-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "avdd0v85_pcie20";
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <850000>;
> + vin-supply = <&vdd_0v85_s0>;
> + };
> +
> + avdd1v8_pcie20: avdd1v8-pcie20-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "avdd1v8_pcie20";
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&avcc_1v8_s0>;
> + };
> +
> + avdd0v75_pcie30: avdd0v75-pcie30-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "avdd0v75_pcie30";
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> + vin-supply = <&avdd_0v75_s0>;
> + };
> +
> + pcie30_avdd1v8: avdd1v8-pcie30-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "pcie30_avdd1v8";
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&avcc_1v8_s0>;
> + };
> +
> + vcc5v0_host: vcc5v0-host-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_host";
> + regulator-boot-on;
> + regulator-always-on;
> + enable-active-high;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_host1_en>;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + vcc5v0_otg: vcc5v0-otg-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_otg";
> + regulator-boot-on;
> + regulator-always-on;
> + enable-active-high;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&typec5v_pwren>;
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + vcc_mipidphy0: vcc-mipi-dphy0-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_mipidphy0";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + enable-active-high;
> + gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&vcc5v0_sys>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&cam_en>;
> + };
> +};
> +
> +&combphy0_ps {
> + status = "okay";
> +};
> +
> +&combphy1_ps {
> + status = "okay";
> +};
> +
> +&combphy2_psu {
> + status = "okay";
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b2 {
> + cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_b3 {
> + cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&gmac0 {
> + clock_in_out = "output";
> + phy-handle = <&rgmii_phy>;
> + phy-mode = "rgmii-rxid";
> + pinctrl-0 = <&gmac0_miim
> + &gmac0_tx_bus2
> + &gmac0_rx_bus2
> + &gmac0_rgmii_clk
> + &gmac0_rgmii_bus>;
> + pinctrl-names = "default";
> + rx_delay = <0x00>;
> + tx_delay = <0x43>;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + pinctrl-0 = <&i2c0m2_xfer>;
> + status = "okay";
> +
> + vdd_cpu_big0_s0: regulator@42 {
> + compatible = "rockchip,rk8602";
> + reg = <0x42>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_cpu_big0_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-ramp-delay = <2300>;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_big1_s0: regulator@43 {
> + compatible = "rockchip,rk8603", "rockchip,rk8602";
> + reg = <0x43>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_cpu_big1_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-ramp-delay = <2300>;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + vdd_npu_s0: regulator@42 {
> + compatible = "rockchip,rk8602";
> + reg = <0x42>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-name = "vdd_npu_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <2300>;
> + vin-supply = <&vcc5v0_sys>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c6 {
> + status = "okay";
> +
> + hym8563: rtc@51 {
> + compatible = "haoyu,hym8563";
> + reg = <0x51>;
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "hym8563";
> + pinctrl-names = "default";
> + pinctrl-0 = <&hym8563_int>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
> + wakeup-source;
> + };
> +};
> +
> +&i2c7 {
> + pinctrl-0 = <&i2c7m0_xfer>;
> + status = "okay";
> +
> + es8316: audio-codec@11 {
> + compatible = "everest,es8316";
> + reg = <0x11>;
> + clocks = <&cru I2S0_8CH_MCLKOUT>;
> + clock-names = "mclk";
> + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
> + assigned-clock-rates = <12288000>;
> + #sound-dai-cells = <0>;
> +
> + port {
> + es8316_p0_0: endpoint {
> + remote-endpoint = <&i2s0_8ch_p0_0>;
> + };
> + };
> + };
> +};
> +
> +&i2s0_8ch {
> + pinctrl-0 = <&i2s0_lrck
> + &i2s0_mclk
> + &i2s0_sclk
> + &i2s0_sdi0
> + &i2s0_sdo0>;
> + status = "okay";
> +
> + i2s0_8ch_p0: port {
> + i2s0_8ch_p0_0: endpoint {
> + dai-format = "i2s";
> + mclk-fs = <256>;
> + remote-endpoint = <&es8316_p0_0>;
> + };
> + };
> +};
> +
> +&mdio0 {
> + rgmii_phy: ethernet-phy@1 {
> + /* YT8531C/H */
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&yt8531_rst>;
> + reset-assert-us = <20000>;
> + reset-deassert-us = <100000>;
> + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +/* M.2 E-Key */
> +&pcie2x1l1 {
> + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
> + vpcie3v3-supply = <&vcc3v3_sys>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
> + status = "okay";
> +};
> +
> +/* ethernet */
> +&pcie2x1l2 {
> + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> + vpcie3v3-supply = <&vcc3v3_sys>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&rtl8111_isolate>;
> + status = "okay";
> +};
> +
> +&pcie30phy {
> + status = "okay";
> +};
> +
> +&pcie3x2 {
> + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
> + vpcie3v3-supply = <&vcc3v3_sys>;
> + status = "okay";
> +};
> +
> +/* M.2 M-Kye ssd */
> +&pcie3x4 {
> + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
> + vpcie3v3-supply = <&vcc3v3_sys>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + cam {
> + cam_en: cam-en {
> + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_output_high>;
> + };
> + };
> +
> + hym8563 {
> + hym8563_int: hym8563-int {
> + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + lcd {
> + lcdpwr_en: lcdpwr-en {
> + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> +
> + bl_en: bl-en {
> + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + rtl8111 {
> + rtl8111_isolate: rtl8111-isolate {
> + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + rtl8211f {
> + yt8531_rst: yt8531-rst {
> + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + usb {
> + vcc5v0_host1_en: vcc5v0-host1-en {
> + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + usb-typec {
> + typec5v_pwren: typec5v-pwren {
> + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +
> + wifi {
> + bt_pwron: bt-pwron {
> + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + pcie_clkreq: pcie-clkreq {
> + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + pcie_rst: pcie-rst {
> + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + wifi_pwron: wifi-pwron {
> + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + pcie_wake: pcie-wake {
> + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcc_1v8_s0>;
> + status = "okay";
> +};
> +
> +&sata1 {
> + status = "okay";
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + no-sdio;
> + no-sd;
> + non-removable;
> + max-frequency = <200000000>;
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> + status = "okay";
> +};
> +
> +&sdmmc {
> + max-frequency = <150000000>;
> + no-sdio;
> + no-mmc;
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + disable-wp;
> + sd-uhs-sdr104;
> + vqmmc-supply = <&vccio_sd_s0>;
> + status = "okay";
> +};
> +
> +&spi2 {
> + status = "okay";
> + assigned-clocks = <&cru CLK_SPI2>;
> + assigned-clock-rates = <200000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
> + num-cs = <1>;
> +
> + pmic@0 {
> + compatible = "rockchip,rk806";
> + spi-max-frequency = <1000000>;
> + reg = <0x0>;
> +
> + interrupt-parent = <&gpio0>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
> + <&rk806_dvs2_null>, <&rk806_dvs3_null>;
> +
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc5-supply = <&vcc5v0_sys>;
> + vcc6-supply = <&vcc5v0_sys>;
> + vcc7-supply = <&vcc5v0_sys>;
> + vcc8-supply = <&vcc5v0_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> + vcc10-supply = <&vcc5v0_sys>;
> + vcc11-supply = <&vcc_2v0_pldo_s3>;
> + vcc12-supply = <&vcc5v0_sys>;
> + vcc13-supply = <&vcc_2v0_pldo_s3>;
> + vcc14-supply = <&vcc_2v0_pldo_s3>;
> + vcca-supply = <&vcc5v0_sys>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + rk806_dvs1_null: dvs1-null-pins {
> + pins = "gpio_pwrctrl2";
> + function = "pin_fun0";
> + };
> +
> + rk806_dvs2_null: dvs2-null-pins {
> + pins = "gpio_pwrctrl2";
> + function = "pin_fun0";
> + };
> +
> + rk806_dvs3_null: dvs3-null-pins {
> + pins = "gpio_pwrctrl3";
> + function = "pin_fun0";
> + };
> +
> + regulators {
> + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_gpu_s0";
> + regulator-enable-ramp-delay = <400>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_cpu_lit_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_log_s0: dcdc-reg3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <750000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_log_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <750000>;
> + };
> + };
> +
> + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_vdenc_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_ddr_s0: dcdc-reg5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <675000>;
> + regulator-max-microvolt = <900000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_ddr_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <850000>;
> + };
> + };
> +
> + vdd2_ddr_s3: dcdc-reg6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vdd2_ddr_s3";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_2v0_pldo_s3: dcdc-reg7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vdd_2v0_pldo_s3";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <2000000>;
> + };
> + };
> +
> + vcc_3v3_s3: dcdc-reg8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc_3v3_s3";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vddq_ddr_s0: dcdc-reg9 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vddq_ddr_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v8_s3: dcdc-reg10 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_1v8_s3";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + avcc_1v8_s0: pldo-reg1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "avcc_1v8_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v8_s0: pldo-reg2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "vcc_1v8_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + avdd_1v2_s0: pldo-reg3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-name = "avdd_1v2_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v3_s0: pldo-reg4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vcc_3v3_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_sd_s0: pldo-reg5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-ramp-delay = <12500>;
> + regulator-name = "vccio_sd_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + pldo6_s3: pldo-reg6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-name = "pldo6_s3";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vdd_0v75_s3: nldo-reg1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> + regulator-name = "vdd_0v75_s3";
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <750000>;
> + };
> + };
> +
> + vdd_ddr_pll_s0: nldo-reg2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <850000>;
> + regulator-name = "vdd_ddr_pll_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <850000>;
> + };
> + };
> +
> + avdd_0v75_s0: nldo-reg3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> + regulator-name = "avdd_0v75_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_0v85_s0: nldo-reg4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <850000>;
> + regulator-name = "vdd_0v85_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_0v75_s0: nldo-reg5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <750000>;
> + regulator-name = "vdd_0v75_s0";
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +};
> +
> +&tsadc {
> + status = "okay";
> +};
> +
> +&u2phy2 {
> + status = "okay";
> +};
> +
> +&u2phy3 {
> + status = "okay";
> +};
> +
> +&u2phy2_host {
> + phy-supply = <&vcc5v0_host>;
> + status = "okay";
> +};
> +
> +&u2phy3_host {
> + phy-supply = <&vcc5v0_host>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-0 = <&uart2m0_xfer>;
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
>




2023-12-12 12:47:52

by Andy Yan

[permalink] [raw]
Subject: Re:Re: [PATCH v3 5/5] arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB


Hi Heiko:

At 2023-12-11 20:33:00, "Heiko Stübner" <[email protected]> wrote:
>Am Montag, 11. Dezember 2023, 11:50:43 CET schrieb Andy Yan:
>> Cool Pi CM5 EVB is a board based on rk3588.
>>
>> Specification:
>> - Rockchip RK3588
>> - LPDDR4 2/4/8/16 GB
>> - TF scard slot
>> - eMMC 8/32/64/128 GB module
>> - Gigabit ethernet x 1 with PHY YT8531
>> - Gigabit ethernet x 1 drived by PCIE with YT6801S
>> - HDMI Type A out x 2
>> - HDMI Type D in x 1
>> - USB 2.0 Host x 2
>> - USB 3.0 OTG x 1
>> - USB 3.0 Host x 1
>> - PCIE M.2 E Key for Wireless connection
>> - PCIE M.2 M Key for NVME connection
>> - 40 pin header
>>
>> Signed-off-by: Andy Yan <[email protected]>
>
>In the overall scheme of things I would really like to see the correct
>split between SoM dtsi and baseboard dts, like the other SoMs do.
>
>You said you wanted to wait for an actual second baseboard to come along
>before doing this and I guess for "yet another som" we can try going that
>route.
>
>But please state this explicitly in the commit message that this is a
>baseboard+som combination, so the next one working here should do
>that split.
>
>An update is needed anyway, cause the compatible thing mentioned in
>the binding.
>

I try to split it as a SoM dtsi + board dts in V4

>
>Thanks
>Heiko
>
>> ---
>>
>> Changes in v3:
>> - drop ununnecessary property status = "okay" for backlight
>> - reorder some nodes alphabetical
>> - drop ununnecessary blank line
>>
>> Changes in v2:
>> - change board compatible from "CoolPi CM5 EVB" to "coolpi,pi-cm5-evb"
>>
>> arch/arm64/boot/dts/rockchip/Makefile | 1 +
>> .../dts/rockchip/rk3588-coolpi-cm5-evb.dts | 879 ++++++++++++++++++
>> 2 files changed, 880 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
>> index e59682691eb0..9be8e4830158 100644
>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>> @@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
>> new file mode 100644
>> index 000000000000..ccf17185dc10
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
>> @@ -0,0 +1,879 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
>> + *
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/leds/common.h>
>> +#include <dt-bindings/pwm/pwm.h>
>> +#include <dt-bindings/pinctrl/rockchip.h>
>> +#include "rk3588.dtsi"
>> +
>> +/ {
>> + model = "RK3588 CoolPi CM5 EVB";
>> + compatible = "coolpi,pi-cm5-evb", "rockchip,rk3588";
>> +
>> + aliases {
>> + mmc0 = &sdhci;
>> + mmc1 = &sdio;
>> + mmc2 = &sdmmc;
>> + serial2 = &uart2;
>> + };
>> +
>> + analog-sound {
>> + compatible = "audio-graph-card";
>> + label = "rk3588-es8316";
>> +
>> + widgets = "Microphone", "Mic Jack",
>> + "Headphone", "Headphones";
>> +
>> + routing = "MIC2", "Mic Jack",
>> + "Headphones", "HPOL",
>> + "Headphones", "HPOR";
>> +
>> + dais = <&i2s0_8ch_p0>;
>> + };
>> +
>> + backlight: backlight {
>> + compatible = "pwm-backlight";
>> + power-supply = <&vcc12v_dcin>;
>> + pwms = <&pwm2 0 25000 0>;
>> + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&bl_en>;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial2:1500000n8";
>> + };
>> +
>> + leds: leds {
>> + compatible = "gpio-leds";
>> +
>> + led: led-green {
>> + color = <LED_COLOR_ID_GREEN>;
>> + function = LED_FUNCTION_STATUS;
>> + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
>> + linux,default-trigger = "heartbeat";
>> + };
>> + };
>> +
>> + vcc12v_dcin: vcc12v-dcin-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc12v_dcin";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <12000000>;
>> + regulator-max-microvolt = <12000000>;
>> + };
>> +
>> + vcc5v0_sys: vcc5v0-sys-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc5v0_sys";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + vin-supply = <&vcc12v_dcin>;
>> + };
>> +
>> + vcc3v3_sys: vcc3v3-sys-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc3v3_sys";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + vin-supply = <&vcc12v_dcin>;
>> + };
>> +
>> + vcc3v3_lcd: vcc3v3-lcd-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc3v3_lcd";
>> + enable-active-high;
>> + gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&lcdpwr_en>;
>> + vin-supply = <&vcc3v3_sys>;
>> + };
>> +
>> + avdd0v85_pcie20: avdd0v85-pcie20-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "avdd0v85_pcie20";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-min-microvolt = <850000>;
>> + regulator-max-microvolt = <850000>;
>> + vin-supply = <&vdd_0v85_s0>;
>> + };
>> +
>> + avdd1v8_pcie20: avdd1v8-pcie20-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "avdd1v8_pcie20";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + vin-supply = <&avcc_1v8_s0>;
>> + };
>> +
>> + avdd0v75_pcie30: avdd0v75-pcie30-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "avdd0v75_pcie30";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <750000>;
>> + vin-supply = <&avdd_0v75_s0>;
>> + };
>> +
>> + pcie30_avdd1v8: avdd1v8-pcie30-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "pcie30_avdd1v8";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + vin-supply = <&avcc_1v8_s0>;
>> + };
>> +
>> + vcc5v0_host: vcc5v0-host-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc5v0_host";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + enable-active-high;
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&vcc5v0_host1_en>;
>> + vin-supply = <&vcc5v0_sys>;
>> + };
>> +
>> + vcc5v0_otg: vcc5v0-otg-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc5v0_otg";
>> + regulator-boot-on;
>> + regulator-always-on;
>> + enable-active-high;
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&typec5v_pwren>;
>> + vin-supply = <&vcc5v0_sys>;
>> + };
>> +
>> + vcc_mipidphy0: vcc-mipi-dphy0-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc_mipidphy0";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + regulator-boot-on;
>> + regulator-always-on;
>> + enable-active-high;
>> + gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
>> + vin-supply = <&vcc5v0_sys>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&cam_en>;
>> + };
>> +};
>> +
>> +&combphy0_ps {
>> + status = "okay";
>> +};
>> +
>> +&combphy1_ps {
>> + status = "okay";
>> +};
>> +
>> +&combphy2_psu {
>> + status = "okay";
>> +};
>> +
>> +&cpu_b0 {
>> + cpu-supply = <&vdd_cpu_big0_s0>;
>> +};
>> +
>> +&cpu_b1 {
>> + cpu-supply = <&vdd_cpu_big0_s0>;
>> +};
>> +
>> +&cpu_b2 {
>> + cpu-supply = <&vdd_cpu_big1_s0>;
>> +};
>> +
>> +&cpu_b3 {
>> + cpu-supply = <&vdd_cpu_big1_s0>;
>> +};
>> +
>> +&cpu_l0 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> +};
>> +
>> +&cpu_l1 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> +};
>> +
>> +&cpu_l2 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> +};
>> +
>> +&cpu_l3 {
>> + cpu-supply = <&vdd_cpu_lit_s0>;
>> +};
>> +
>> +&gmac0 {
>> + clock_in_out = "output";
>> + phy-handle = <&rgmii_phy>;
>> + phy-mode = "rgmii-rxid";
>> + pinctrl-0 = <&gmac0_miim
>> + &gmac0_tx_bus2
>> + &gmac0_rx_bus2
>> + &gmac0_rgmii_clk
>> + &gmac0_rgmii_bus>;
>> + pinctrl-names = "default";
>> + rx_delay = <0x00>;
>> + tx_delay = <0x43>;
>> + status = "okay";
>> +};
>> +
>> +&i2c0 {
>> + pinctrl-0 = <&i2c0m2_xfer>;
>> + status = "okay";
>> +
>> + vdd_cpu_big0_s0: regulator@42 {
>> + compatible = "rockchip,rk8602";
>> + reg = <0x42>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-name = "vdd_cpu_big0_s0";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <1050000>;
>> + regulator-ramp-delay = <2300>;
>> + vin-supply = <&vcc5v0_sys>;
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_cpu_big1_s0: regulator@43 {
>> + compatible = "rockchip,rk8603", "rockchip,rk8602";
>> + reg = <0x43>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-name = "vdd_cpu_big1_s0";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <1050000>;
>> + regulator-ramp-delay = <2300>;
>> + vin-supply = <&vcc5v0_sys>;
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +};
>> +
>> +&i2c2 {
>> + status = "okay";
>> +
>> + vdd_npu_s0: regulator@42 {
>> + compatible = "rockchip,rk8602";
>> + reg = <0x42>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-name = "vdd_npu_s0";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-ramp-delay = <2300>;
>> + vin-supply = <&vcc5v0_sys>;
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +};
>> +
>> +&i2c6 {
>> + status = "okay";
>> +
>> + hym8563: rtc@51 {
>> + compatible = "haoyu,hym8563";
>> + reg = <0x51>;
>> + #clock-cells = <0>;
>> + clock-frequency = <32768>;
>> + clock-output-names = "hym8563";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&hym8563_int>;
>> + interrupt-parent = <&gpio0>;
>> + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
>> + wakeup-source;
>> + };
>> +};
>> +
>> +&i2c7 {
>> + pinctrl-0 = <&i2c7m0_xfer>;
>> + status = "okay";
>> +
>> + es8316: audio-codec@11 {
>> + compatible = "everest,es8316";
>> + reg = <0x11>;
>> + clocks = <&cru I2S0_8CH_MCLKOUT>;
>> + clock-names = "mclk";
>> + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
>> + assigned-clock-rates = <12288000>;
>> + #sound-dai-cells = <0>;
>> +
>> + port {
>> + es8316_p0_0: endpoint {
>> + remote-endpoint = <&i2s0_8ch_p0_0>;
>> + };
>> + };
>> + };
>> +};
>> +
>> +&i2s0_8ch {
>> + pinctrl-0 = <&i2s0_lrck
>> + &i2s0_mclk
>> + &i2s0_sclk
>> + &i2s0_sdi0
>> + &i2s0_sdo0>;
>> + status = "okay";
>> +
>> + i2s0_8ch_p0: port {
>> + i2s0_8ch_p0_0: endpoint {
>> + dai-format = "i2s";
>> + mclk-fs = <256>;
>> + remote-endpoint = <&es8316_p0_0>;
>> + };
>> + };
>> +};
>> +
>> +&mdio0 {
>> + rgmii_phy: ethernet-phy@1 {
>> + /* YT8531C/H */
>> + compatible = "ethernet-phy-ieee802.3-c22";
>> + reg = <0x1>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&yt8531_rst>;
>> + reset-assert-us = <20000>;
>> + reset-deassert-us = <100000>;
>> + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
>> + };
>> +};
>> +
>> +/* M.2 E-Key */
>> +&pcie2x1l1 {
>> + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
>> + vpcie3v3-supply = <&vcc3v3_sys>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
>> + status = "okay";
>> +};
>> +
>> +/* ethernet */
>> +&pcie2x1l2 {
>> + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
>> + vpcie3v3-supply = <&vcc3v3_sys>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&rtl8111_isolate>;
>> + status = "okay";
>> +};
>> +
>> +&pcie30phy {
>> + status = "okay";
>> +};
>> +
>> +&pcie3x2 {
>> + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
>> + vpcie3v3-supply = <&vcc3v3_sys>;
>> + status = "okay";
>> +};
>> +
>> +/* M.2 M-Kye ssd */
>> +&pcie3x4 {
>> + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
>> + vpcie3v3-supply = <&vcc3v3_sys>;
>> + status = "okay";
>> +};
>> +
>> +&pinctrl {
>> + cam {
>> + cam_en: cam-en {
>> + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_output_high>;
>> + };
>> + };
>> +
>> + hym8563 {
>> + hym8563_int: hym8563-int {
>> + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> + };
>> +
>> + lcd {
>> + lcdpwr_en: lcdpwr-en {
>> + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
>> + };
>> +
>> + bl_en: bl-en {
>> + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + rtl8111 {
>> + rtl8111_isolate: rtl8111-isolate {
>> + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> + };
>> +
>> + rtl8211f {
>> + yt8531_rst: yt8531-rst {
>> + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + usb {
>> + vcc5v0_host1_en: vcc5v0-host1-en {
>> + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> + };
>> +
>> + usb-typec {
>> + typec5v_pwren: typec5v-pwren {
>> + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> + };
>> +
>> + wifi {
>> + bt_pwron: bt-pwron {
>> + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> +
>> + pcie_clkreq: pcie-clkreq {
>> + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> +
>> + pcie_rst: pcie-rst {
>> + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> +
>> + wifi_pwron: wifi-pwron {
>> + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> +
>> + pcie_wake: pcie-wake {
>> + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
>> + };
>> + };
>> +};
>> +
>> +&pwm2 {
>> + status = "okay";
>> +};
>> +
>> +&saradc {
>> + vref-supply = <&vcc_1v8_s0>;
>> + status = "okay";
>> +};
>> +
>> +&sata1 {
>> + status = "okay";
>> +};
>> +
>> +&sdhci {
>> + bus-width = <8>;
>> + no-sdio;
>> + no-sd;
>> + non-removable;
>> + max-frequency = <200000000>;
>> + mmc-hs400-1_8v;
>> + mmc-hs400-enhanced-strobe;
>> + status = "okay";
>> +};
>> +
>> +&sdmmc {
>> + max-frequency = <150000000>;
>> + no-sdio;
>> + no-mmc;
>> + bus-width = <4>;
>> + cap-mmc-highspeed;
>> + cap-sd-highspeed;
>> + disable-wp;
>> + sd-uhs-sdr104;
>> + vqmmc-supply = <&vccio_sd_s0>;
>> + status = "okay";
>> +};
>> +
>> +&spi2 {
>> + status = "okay";
>> + assigned-clocks = <&cru CLK_SPI2>;
>> + assigned-clock-rates = <200000000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
>> + num-cs = <1>;
>> +
>> + pmic@0 {
>> + compatible = "rockchip,rk806";
>> + spi-max-frequency = <1000000>;
>> + reg = <0x0>;
>> +
>> + interrupt-parent = <&gpio0>;
>> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
>> + <&rk806_dvs2_null>, <&rk806_dvs3_null>;
>> +
>> + vcc1-supply = <&vcc5v0_sys>;
>> + vcc2-supply = <&vcc5v0_sys>;
>> + vcc3-supply = <&vcc5v0_sys>;
>> + vcc4-supply = <&vcc5v0_sys>;
>> + vcc5-supply = <&vcc5v0_sys>;
>> + vcc6-supply = <&vcc5v0_sys>;
>> + vcc7-supply = <&vcc5v0_sys>;
>> + vcc8-supply = <&vcc5v0_sys>;
>> + vcc9-supply = <&vcc5v0_sys>;
>> + vcc10-supply = <&vcc5v0_sys>;
>> + vcc11-supply = <&vcc_2v0_pldo_s3>;
>> + vcc12-supply = <&vcc5v0_sys>;
>> + vcc13-supply = <&vcc_2v0_pldo_s3>;
>> + vcc14-supply = <&vcc_2v0_pldo_s3>;
>> + vcca-supply = <&vcc5v0_sys>;
>> +
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + rk806_dvs1_null: dvs1-null-pins {
>> + pins = "gpio_pwrctrl2";
>> + function = "pin_fun0";
>> + };
>> +
>> + rk806_dvs2_null: dvs2-null-pins {
>> + pins = "gpio_pwrctrl2";
>> + function = "pin_fun0";
>> + };
>> +
>> + rk806_dvs3_null: dvs3-null-pins {
>> + pins = "gpio_pwrctrl3";
>> + function = "pin_fun0";
>> + };
>> +
>> + regulators {
>> + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_gpu_s0";
>> + regulator-enable-ramp-delay = <400>;
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_cpu_lit_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_log_s0: dcdc-reg3 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <675000>;
>> + regulator-max-microvolt = <750000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_log_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + regulator-suspend-microvolt = <750000>;
>> + };
>> + };
>> +
>> + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <550000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_vdenc_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_ddr_s0: dcdc-reg5 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <675000>;
>> + regulator-max-microvolt = <900000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_ddr_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + regulator-suspend-microvolt = <850000>;
>> + };
>> + };
>> +
>> + vdd2_ddr_s3: dcdc-reg6 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-name = "vdd2_ddr_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + };
>> + };
>> +
>> + vcc_2v0_pldo_s3: dcdc-reg7 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <2000000>;
>> + regulator-max-microvolt = <2000000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vdd_2v0_pldo_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <2000000>;
>> + };
>> + };
>> +
>> + vcc_3v3_s3: dcdc-reg8 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-name = "vcc_3v3_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <3300000>;
>> + };
>> + };
>> +
>> + vddq_ddr_s0: dcdc-reg9 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-name = "vddq_ddr_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_1v8_s3: dcdc-reg10 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-name = "vcc_1v8_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <1800000>;
>> + };
>> + };
>> +
>> + avcc_1v8_s0: pldo-reg1 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-name = "avcc_1v8_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_1v8_s0: pldo-reg2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-name = "vcc_1v8_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + regulator-suspend-microvolt = <1800000>;
>> + };
>> + };
>> +
>> + avdd_1v2_s0: pldo-reg3 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-name = "avdd_1v2_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_3v3_s0: pldo-reg4 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vcc_3v3_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vccio_sd_s0: pldo-reg5 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-ramp-delay = <12500>;
>> + regulator-name = "vccio_sd_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + pldo6_s3: pldo-reg6 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-name = "pldo6_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <1800000>;
>> + };
>> + };
>> +
>> + vdd_0v75_s3: nldo-reg1 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <750000>;
>> + regulator-name = "vdd_0v75_s3";
>> +
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <750000>;
>> + };
>> + };
>> +
>> + vdd_ddr_pll_s0: nldo-reg2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <850000>;
>> + regulator-max-microvolt = <850000>;
>> + regulator-name = "vdd_ddr_pll_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + regulator-suspend-microvolt = <850000>;
>> + };
>> + };
>> +
>> + avdd_0v75_s0: nldo-reg3 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <750000>;
>> + regulator-name = "avdd_0v75_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_0v85_s0: nldo-reg4 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <850000>;
>> + regulator-max-microvolt = <850000>;
>> + regulator-name = "vdd_0v85_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_0v75_s0: nldo-reg5 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <750000>;
>> + regulator-name = "vdd_0v75_s0";
>> +
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> + };
>> + };
>> +};
>> +
>> +&tsadc {
>> + status = "okay";
>> +};
>> +
>> +&u2phy2 {
>> + status = "okay";
>> +};
>> +
>> +&u2phy3 {
>> + status = "okay";
>> +};
>> +
>> +&u2phy2_host {
>> + phy-supply = <&vcc5v0_host>;
>> + status = "okay";
>> +};
>> +
>> +&u2phy3_host {
>> + phy-supply = <&vcc5v0_host>;
>> + status = "okay";
>> +};
>> +
>> +&uart2 {
>> + pinctrl-0 = <&uart2m0_xfer>;
>> + status = "okay";
>> +};
>> +
>> +&usb_host0_ehci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host0_ohci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host1_ehci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host1_ohci {
>> + status = "okay";
>> +};
>>
>
>
>
>
>
>_______________________________________________
>linux-arm-kernel mailing list
>[email protected]
>http://lists.infradead.org/mailman/listinfo/linux-arm-kernel