2023-11-16 16:34:32

by Dietmar Eggemann

[permalink] [raw]
Subject: Re: [PATCH] sched/fair: Use all little CPUs for CPU-bound workload

On 10/11/2023 13:59, Pierre Gondois wrote:
> Running n CPU-bound tasks on an n CPUs platform with asymmetric CPU
> capacity might result in a task placement where two tasks run on a
> big CPU and none on a little CPU. This placement could be more optimal
> by using all CPUs.
>
> Testing platform:
> Juno-r2:
> - 2 big CPUs (1-2), maximum capacity of 1024
> - 4 little CPUs (0,3-5), maximum capacity of 383
>
> Testing workload ([1]):
> Spawn 6 CPU-bound tasks. During the first 100ms (step 1), each tasks
> is affine to a CPU, except for:
> - one little CPU which is left idle.
> - one big CPU which has 2 tasks affine.
> After the 100ms (step 2), remove the cpumask affinity.

I used your workload on my Juno-r0 with LISA (rt-app overwrites the
mainline CPU capacity values [446 1024 1024 446 446 466] to [675 1024
1024 675 675 675] to adapt to rt-app busy loop's instruction mix.

Here I can't see the issue you bring up here. The two tasks sharing a
CPU have util_avg = ~512 and the load-balance from one task to the idle
little CPU is happening,

I assume it's the diff in CPU capacity of the little CPUs: 383 < 512 <
675 ?

>
> Before patch:
> During step 2, the load balancer running from the idle CPU tags sched
> domains as:
> - little CPUs: 'group_has_spare'. Indeed, 3 CPU-bound tasks run on a
> 4 CPUs sched-domain, and the idle CPU provides enough spare
> capacity.
> - big CPUs: 'group_overloaded'. Indeed, 3 tasks run on a 2 CPUs
> sched-domain, so the following path is used:
> group_is_overloaded()
> \-if (sgs->sum_nr_running <= sgs->group_weight) return true;
>
> The following path which would change the migration type to
> 'migrate_task' is not taken:
> calculate_imbalance()
> \-if (env->idle != CPU_NOT_IDLE && env->imbalance == 0)
> as the local group has some spare capacity, so the imbalance
> is not 0.
>
> The migration type requested is 'migrate_util' and the busiest
> runqueue is the big CPU's runqueue having 2 tasks (each having a
> utilization of 512). The idle little CPU cannot pull one of these
> task as its capacity is too small for the task. The following path
> is used:

Ah, here you're describing the issue I mentioned above.

> detach_tasks()
> \-case migrate_util:
> \-if (util > env->imbalance) goto next;
>
> After patch:
> When the local group has spare capacity and the busiest group is at
> least tagged as 'group_fully_busy', if the local group has more CPUs
> than CFS tasks and the busiest group more CFS tasks than CPUs,
> request a 'migrate_task' type migration.
>
> Improvement:
> Running the testing workload [1] with the step 2 representing
> a ~10s load for a big CPU:
> Before patch: ~19.3s
> After patch: ~18s (-6.7%)
>
> The issue only happens at the DIE level on platforms able to have
> 'migrate_util' migration types, i.e. no DynamIQ systems where
> SD_SHARE_PKG_RESOURCES is set.

Right, mainline Arm DynamIQ should only have 1 SD level (MC). Android
might still be affected since they run MC and DIE.

>
> Signed-off-by: Pierre Gondois <[email protected]>
> ---
> kernel/sched/fair.c | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> index df348aa55d3c..5a215c96d420 100644
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -10495,6 +10495,23 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s
> env->imbalance = max(local->group_capacity, local->group_util) -
> local->group_util;
>
> + /*
> + * On an asymmetric system with CPU-bound tasks, a
> + * migrate_util balance might not be able to migrate a
> + * task from a big to a little CPU, letting a little
> + * CPU unused.
> + * If local has an empty CPU and busiest is overloaded,
> + * balance one task with a migrate_task migration type
> + * instead.
> + */
> + if (env->sd->flags & SD_ASYM_CPUCAPACITY &&
> + local->sum_nr_running < local->group_weight &&
> + busiest->sum_nr_running > busiest->group_weight) {
> + env->migration_type = migrate_task;
> + env->imbalance = 1;
> + return;
> + }
> +
> /*
> * In some cases, the group's utilization is max or even
> * higher than capacity because of migrations but the