Document the Motorola Moto G (2013), which is a smartphone based
on the Qualcomm MSM8226 SoC.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Stanislav Jakubek <[email protected]>
---
Changes in V2:
- collect Krzysztof's A-b
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 66beaac60e1d..d2910982ae86 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -137,6 +137,7 @@ properties:
- microsoft,dempsey
- microsoft,makepeace
- microsoft,moneypenny
+ - motorola,falcon
- samsung,s3ve3g
- const: qcom,msm8226
--
2.34.1
Add a device tree for the Motorola Moto G (2013) smartphone based
on the Qualcomm MSM8226 SoC.
Initially supported features:
- Buttons (Volume Down/Up, Power)
- eMMC
- Hall Effect Sensor
- SimpleFB display
- TMP108 temperature sensor
- Vibrator
Note: the dhob and shob reserved-memory regions are seemingly a part of some
Motorola specific (firmware?) mechanism, see [1].
[1] https://github.com/LineageOS/android_kernel_motorola_msm8226/blob/cm-14.1/Documentation/devicetree/bindings/misc/hob_ram.txt
Signed-off-by: Stanislav Jakubek <[email protected]>
---
Changes in V2:
- split hob-ram reserved-memory region into dhob and shob
- add a note and a link to downstream documentation with more
information about these regions
arch/arm/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/msm8226-motorola-falcon.dts | 359 ++++++++++++++++++
2 files changed, 360 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 6478a39b3be5..3eacbf5c0785 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_QCOM) += \
+ msm8226-motorola-falcon.dtb \
qcom-apq8016-sbc.dtb \
qcom-apq8026-asus-sparrow.dtb \
qcom-apq8026-huawei-sturgeon.dtb \
diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
new file mode 100644
index 000000000000..029e1b1659c9
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+ model = "Motorola Moto G (2013)";
+ compatible = "motorola,falcon", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1;
+ };
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@3200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x03200000 0x800000>;
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+ vsp-supply = <®_lcd_pos>;
+ vsn-supply = <®_lcd_neg>;
+ vddio-supply = <&vddio_disp_vreg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ vddio_disp_vreg: regulator-vddio-disp {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio_disp";
+ gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pm8226_l8>;
+ startup-delay-us = <300>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@3200000 {
+ reg = <0x03200000 0x800000>;
+ no-map;
+ };
+
+ dhob@f500000 {
+ reg = <0x0f500000 0x40000>;
+ no-map;
+ };
+
+ shob@f540000 {
+ reg = <0x0f540000 0x2000>;
+ no-map;
+ };
+
+ smem_region: smem@fa00000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+
+ /* Actually <0x0fa00000 0x500000>, but first 100000 is smem */
+ reserved@fb00000 {
+ reg = <0x0fb00000 0x400000>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ regulator@3e {
+ compatible = "ti,tps65132";
+ reg = <0x3e>;
+ pinctrl-0 = <®_lcd_default>;
+ pinctrl-names = "default";
+
+ reg_lcd_pos: outp {
+ regulator-name = "outp";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-active-discharge = <1>;
+ regulator-boot-on;
+ enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_lcd_neg: outn {
+ regulator-name = "outn";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6000000>;
+ regulator-active-discharge = <1>;
+ regulator-boot-on;
+ enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ temperature-sensor@48 {
+ compatible = "ti,tmp108";
+ reg = <0x48>;
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&temp_alert_default>;
+ pinctrl-names = "default";
+ #thermal-sensor-cells = <0>;
+ };
+};
+
+&pm8226_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ };
+
+ pm8226_lvs1: lvs1 {
+ regulator-always-on;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+
+ status = "okay";
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <2000000>;
+ qcom,fast-charge-current-limit = <1900000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
+};
+
+&tlmm {
+ reg_lcd_default: reg-lcd-default-state {
+ pins = "gpio31", "gpio33";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
+ reg_vddio_disp_default: reg-vddio-disp-default-state {
+ pins = "gpio34";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+
+ temp_alert_default: temp-alert-default-state {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-disable;
+ };
+};
+
+&usb {
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
--
2.34.1
On 26.03.2024 1:11 PM, Stanislav Jakubek wrote:
> Add a device tree for the Motorola Moto G (2013) smartphone based
> on the Qualcomm MSM8226 SoC.
>
> Initially supported features:
> - Buttons (Volume Down/Up, Power)
> - eMMC
> - Hall Effect Sensor
> - SimpleFB display
> - TMP108 temperature sensor
> - Vibrator
>
> Note: the dhob and shob reserved-memory regions are seemingly a part of some
> Motorola specific (firmware?) mechanism, see [1].
>
> [1] https://github.com/LineageOS/android_kernel_motorola_msm8226/blob/cm-14.1/Documentation/devicetree/bindings/misc/hob_ram.txt
>
> Signed-off-by: Stanislav Jakubek <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad