From: Roberto Sassu <[email protected]>
One of the major goals of LSM stacking is to run multiple LSMs side by side
without interfering with each other. The ultimate decision will depend on
individual LSM decision.
Several changes need to be made to the LSM infrastructure to be able to
support that. This patch set tackles one of them: gives to each LSM the
ability to specify one or multiple xattrs to be set at inode creation
time and, at the same time, gives to EVM the ability to access all those
xattrs and calculate the HMAC on them.
The first problem that this patch set addresses is to make the
inode_init_security hook definition suitable to use with EVM which, unlike
other LSMs, needs to have visibility of all xattrs and not only the one
that the LSM infrastructure passes to the LSM to be set.
The solution is to replace in the inode_init_security definition the
name/value/len parameters with the beginning of the array containing all
xattrs set by LSMs. Due to security_old_inode_init_security() API
limitation of setting only one xattr, it has been dropped and the remaining
users, ocfs2 and reiserfs, switch to security_inode_init_security().
However, due to the complexity of the changes required to fully exploit the
ability of security_inode_init_security() to set multiple xattrs, those
users can still set only one xattr (the first set in the xattr array) where
previously they called security_old_inode_init_security().
Furthermore, while EVM is invoked unlike before, its xattr will not be set
as it would not be the first set in the xattr array, or if it is the first,
there would not be protected xattrs to calculate the HMAC on.
The second problem this patch set addresses is the limitation of the
call_int_hook() of stopping the loop when the return value from a hook
implementation is not zero. Unfortunately, for the inode_init_security hook
it is a legitimate case to return -EOPNOTSUPP, but this would not
necessarily mean that there is an error to report to the LSM infrastructure
but just that an LSM does not will to set an xattr. Other LSMs should be
still consulted as well.
The solution for this specific case is to replace the call_int_hook() with
the loop itself, so that -EOPNOTSUPP can be ignored.
Next, this patch set removes the limitation of creating only two xattrs,
one by an active LSM and another by EVM. This patch set extends the
reservation mechanism of the LSM infrastructure, to allow each LSM to
request one or multiple xattrs. While this could potentially lead to
reaching the filesystem limits of number/size of the xattrs, it seems not
an issue that need to be solved by the LSM infrastructure but by the
filesystems themselves. Currently, if the limit is reached, the only
workaround would be to use fewer LSMs.
The reservation mechanism concept makes it very easy for LSMs to position
themselves correctly in the xattr array, as the LSM infrastructure at
initialization time changes the number of xattrs requested by each LSM with
an offset. LSMs can just take that offset as the starting index in the
xattr array and fill the next slots depending on how many xattrs they
requested.
However, while this concept is intuitive, it needs extra care. While for
security blobs (the main reason of the reservation mechanism) it is not
relevant for an LSM if other LSMs filled their portion, it matters for
xattrs, as both EVM and initxattrs() callbacks scan the entire array until
a terminator (xattr with NULL name). If an LSM did not provide an xattr,
which could happen if it is loaded but not initialized, consumers of the
xattr array would stop prematurely.
This patch set avoids this problem by compacting the xattr array each time
after an LSM executed its implementation of the inode_init_security hook.
It needs to be done after each LSM, and not after all, since there might be
LSMs scanning that xattr array too. Compacting the array after all LSMs
would be too late.
Finally, this patch set modifies the evm_inode_init_security() definition
to be compatible with the inode_init_security hook definition and adds
support for scanning the whole xattr array and for calculating the HMAC
on all xattrs provided by LSMs.
This patch set has been tested by introducing several instances of a
TestLSM (some providing an xattr, some not, one with a wrong implementation
to see how the LSM infrastructure handles it, one providing multiple xattrs
and another providing an xattr but in a disabled state). The patch is not
included in this set but it is available here:
https://github.com/robertosassu/linux/commit/e13a03236df0c399dccb73df5fe4cfceb4bb1d89
The test, added to ima-evm-utils, is available here:
https://github.com/robertosassu/ima-evm-utils/blob/evm-multiple-lsms-v5-devel-v3/tests/evm_multiple_lsms.test
The test takes a UML kernel built by Github Actions and launches it several
times, each time with a different combination of LSMs and filesystems (ext4,
reiserfs, ocfs2). After boot, it first checks that there is an xattr for each
LSM providing it (for reiserfs and ocfs2 just the first LSM), and then (for
ext4) calculates the HMAC in user space and compares it with the HMAC
calculated by EVM in kernel space.
A test report can be obtained here:
https://github.com/robertosassu/ima-evm-utils/actions/runs/3525619568/jobs/5912560168
The patch set has been tested with both the SElinux and Smack test suites.
Below, there is the summary of the test results:
SELinux Test Suite result (without patches):
Files=73, Tests=1346, 225 wallclock secs ( 0.43 usr 0.23 sys + 6.11 cusr 58.70 csys = 65.47 CPU)
Result: FAIL
Failed 4/73 test programs. 13/1346 subtests failed.
SELinux Test Suite result (with patches):
Files=73, Tests=1346, 225 wallclock secs ( 0.44 usr 0.22 sys + 6.15 cusr 59.94 csys = 66.75 CPU)
Result: FAIL
Failed 4/73 test programs. 13/1346 subtests failed.
Smack Test Suite result (without patches):
95 Passed, 0 Failed, 100% Success rate
Smack Test Suite result (with patches):
95 Passed, 0 Failed, 100% Success rate
Changelog
v5:
- Modify the cover letter to explain that the goal of this patch set is
supporting multiple per LSM xattrs in EVM, and not moving IMA and EVM to
the LSM infrastructure
- Remove references in the patches description about moving IMA and EVM
to the LSM infrastructure
- Explain that the additional EVM invocation due to the switch to
security_inode_init_security() will not cause the EVM xattr to be added
v4:
- Remove patch to call reiserfs_security_free(), already queued
- Switch ocfs2 and reiserfs to security_inode_init_security() (suggested by
Mimi)
- Remove security_old_inode_init_security() (suggested by Paul)
- Rename security_check_compact_xattrs() to
security_check_compact_filled_xattrs() and add function description
(suggested by Mimi)
- Rename checked_xattrs parameter of security_check_compact_filled_xattrs()
to num_filled_xattrs (suggested by Mimi)
- Rename cur_xattrs variable in security_inode_init_security() to
num_filled_xattrs (suggested by Mimi)
v3:
- Don't free the xattr name in reiserfs_security_free()
- Don't include fs_data parameter in inode_init_security hook
- Don't change evm_inode_init_security(), as it will be removed if EVM is
stacked
- Fix inode_init_security hook documentation
- Drop lsm_find_xattr_slot(), use simple xattr reservation mechanism and
introduce security_check_compact_xattrs() to compact the xattr array
- Don't allocate xattr array if LSMs didn't reserve any xattr
- Return zero if initxattrs() is not provided to
security_inode_init_security(), -EOPNOTSUPP if value is not provided to
security_old_inode_init_security()
- Request LSMs to fill xattrs if only value (not the triple) is provided to
security_old_inode_init_security(), to avoid unnecessary memory
allocation
v2:
- rewrite selinux_old_inode_init_security() to use
security_inode_init_security()
- add lbs_xattr field to lsm_blob_sizes structure, to give the ability to
LSMs to reserve slots in the xattr array (suggested by Casey)
- add new parameter base_slot to inode_init_security hook definition
v1:
- add calls to reiserfs_security_free() and initialize sec->value to NULL
(suggested by Tetsuo and Mimi)
- change definition of inode_init_security hook, replace the name, value
and len triple with the xattr array (suggested by Casey)
- introduce lsm_find_xattr_slot() helper for LSMs to find an unused slot in
the passed xattr array
Roberto Sassu (6):
reiserfs: Switch to security_inode_init_security()
ocfs2: Switch to security_inode_init_security()
security: Remove security_old_inode_init_security()
security: Allow all LSMs to provide xattrs for inode_init_security
hook
evm: Align evm_inode_init_security() definition with LSM
infrastructure
evm: Support multiple LSMs providing an xattr
fs/ocfs2/namei.c | 18 ++---
fs/ocfs2/xattr.c | 30 +++++++-
fs/reiserfs/xattr_security.c | 23 ++++--
include/linux/evm.h | 12 +--
include/linux/lsm_hook_defs.h | 3 +-
include/linux/lsm_hooks.h | 17 ++--
include/linux/security.h | 12 ---
security/integrity/evm/evm.h | 2 +
security/integrity/evm/evm_crypto.c | 9 ++-
security/integrity/evm/evm_main.c | 28 +++++--
security/security.c | 115 +++++++++++++++++++++-------
security/selinux/hooks.c | 19 +++--
security/smack/smack_lsm.c | 26 ++++---
13 files changed, 213 insertions(+), 101 deletions(-)
--
2.25.1
From: Roberto Sassu <[email protected]>
Change the evm_inode_init_security() definition to align with the LSM
infrastructure. Keep the existing behavior of including in the HMAC
calculation only the first xattr provided by LSMs.
Changing the evm_inode_init_security() definition requires passing only the
xattr array allocated by security_inode_init_security(), instead of the
first LSM xattr and the place where the EVM xattr should be filled. In lieu
of passing the EVM xattr, EVM must position itself after the last filled
xattr (by checking the xattr name), since only the beginning of the xattr
array is given.
Finally, make evm_inode_init_security() return value compatible with the
inode_init_security hook conventions, i.e. return -EOPNOTSUPP if it is not
setting an xattr.
EVM is a bit tricky, because xattrs is both an input and an output. If it
was just output, EVM should have returned zero if xattrs is NULL. But,
since xattrs is also input, EVM is unable to do its calculations, so return
-EOPNOTSUPP and handle this error in security_inode_init_security().
Signed-off-by: Roberto Sassu <[email protected]>
---
include/linux/evm.h | 12 ++++++------
security/integrity/evm/evm_main.c | 20 +++++++++++++-------
security/security.c | 5 ++---
3 files changed, 21 insertions(+), 16 deletions(-)
diff --git a/include/linux/evm.h b/include/linux/evm.h
index aa63e0b3c0a2..3bb2ae9fe098 100644
--- a/include/linux/evm.h
+++ b/include/linux/evm.h
@@ -35,9 +35,9 @@ extern int evm_inode_removexattr(struct user_namespace *mnt_userns,
struct dentry *dentry, const char *xattr_name);
extern void evm_inode_post_removexattr(struct dentry *dentry,
const char *xattr_name);
-extern int evm_inode_init_security(struct inode *inode,
- const struct xattr *xattr_array,
- struct xattr *evm);
+extern int evm_inode_init_security(struct inode *inode, struct inode *dir,
+ const struct qstr *qstr,
+ struct xattr *xattrs);
extern bool evm_revalidate_status(const char *xattr_name);
extern int evm_protected_xattr_if_enabled(const char *req_xattr_name);
extern int evm_read_protected_xattrs(struct dentry *dentry, u8 *buffer,
@@ -108,9 +108,9 @@ static inline void evm_inode_post_removexattr(struct dentry *dentry,
return;
}
-static inline int evm_inode_init_security(struct inode *inode,
- const struct xattr *xattr_array,
- struct xattr *evm)
+static inline int evm_inode_init_security(struct inode *inode, struct inode *dir,
+ const struct qstr *qstr,
+ struct xattr *xattrs)
{
return 0;
}
diff --git a/security/integrity/evm/evm_main.c b/security/integrity/evm/evm_main.c
index 23d484e05e6f..0a312cafb7de 100644
--- a/security/integrity/evm/evm_main.c
+++ b/security/integrity/evm/evm_main.c
@@ -845,23 +845,29 @@ void evm_inode_post_setattr(struct dentry *dentry, int ia_valid)
/*
* evm_inode_init_security - initializes security.evm HMAC value
*/
-int evm_inode_init_security(struct inode *inode,
- const struct xattr *lsm_xattr,
- struct xattr *evm_xattr)
+int evm_inode_init_security(struct inode *inode, struct inode *dir,
+ const struct qstr *qstr,
+ struct xattr *xattrs)
{
struct evm_xattr *xattr_data;
+ struct xattr *xattr, *evm_xattr;
int rc;
- if (!(evm_initialized & EVM_INIT_HMAC) ||
- !evm_protected_xattr(lsm_xattr->name))
- return 0;
+ if (!(evm_initialized & EVM_INIT_HMAC) || !xattrs ||
+ !evm_protected_xattr(xattrs->name))
+ return -EOPNOTSUPP;
+
+ for (xattr = xattrs; xattr->value != NULL; xattr++)
+ ;
+
+ evm_xattr = xattr;
xattr_data = kzalloc(sizeof(*xattr_data), GFP_NOFS);
if (!xattr_data)
return -ENOMEM;
xattr_data->data.type = EVM_XATTR_HMAC;
- rc = evm_init_hmac(inode, lsm_xattr, xattr_data->digest);
+ rc = evm_init_hmac(inode, xattrs, xattr_data->digest);
if (rc < 0)
goto out;
diff --git a/security/security.c b/security/security.c
index 26aaa5850867..d256bd223ef4 100644
--- a/security/security.c
+++ b/security/security.c
@@ -1184,9 +1184,8 @@ int security_inode_init_security(struct inode *inode, struct inode *dir,
if (!num_filled_xattrs)
goto out;
- ret = evm_inode_init_security(inode, new_xattrs,
- new_xattrs + num_filled_xattrs);
- if (ret)
+ ret = evm_inode_init_security(inode, dir, qstr, new_xattrs);
+ if (ret && ret != -EOPNOTSUPP)
goto out;
ret = initxattrs(inode, new_xattrs, fs_data);
out:
--
2.25.1
Hi Roberto,
On Wed, 2022-11-23 at 16:47 +0100, Roberto Sassu wrote:
> The second problem this patch set addresses is the limitation of the
> call_int_hook() of stopping the loop when the return value from a hook
> implementation is not zero. Unfortunately, for the inode_init_security hook
> it is a legitimate case to return -EOPNOTSUPP, but this would not
> necessarily mean that there is an error to report to the LSM infrastructure
> but just that an LSM does not will to set an xattr. Other LSMs should be
> still consulted as well.
This is just a heads up. In reviewing the ocfs2 v5 patch, I realized
the meaning of -EOPNOTSUPP is being overloaded to mean multiple things.
Originally, -EOPNOTSUPP meant that the file system didn't implement
xattr support. Now, it is being used to also mean no LSM xattr. In
the former case, none of the LSM xattrs would be written. In the
latter case, some of them will be written.
I'm not convinced that overloading the -EOPNOTSUPP is a good idea.
Still reviewing the patch set...
--
thanks,
Mimi
On 11/23/2022 7:47 AM, Roberto Sassu wrote:
> From: Roberto Sassu <[email protected]>
For the series:
Reviewed-by: Casey Schaufler <[email protected]>
I had one minor comment on 4/6. Thank you.
>
> One of the major goals of LSM stacking is to run multiple LSMs side by side
> without interfering with each other. The ultimate decision will depend on
> individual LSM decision.
>
> Several changes need to be made to the LSM infrastructure to be able to
> support that. This patch set tackles one of them: gives to each LSM the
> ability to specify one or multiple xattrs to be set at inode creation
> time and, at the same time, gives to EVM the ability to access all those
> xattrs and calculate the HMAC on them.
>
> The first problem that this patch set addresses is to make the
> inode_init_security hook definition suitable to use with EVM which, unlike
> other LSMs, needs to have visibility of all xattrs and not only the one
> that the LSM infrastructure passes to the LSM to be set.
>
> The solution is to replace in the inode_init_security definition the
> name/value/len parameters with the beginning of the array containing all
> xattrs set by LSMs. Due to security_old_inode_init_security() API
> limitation of setting only one xattr, it has been dropped and the remaining
> users, ocfs2 and reiserfs, switch to security_inode_init_security().
> However, due to the complexity of the changes required to fully exploit the
> ability of security_inode_init_security() to set multiple xattrs, those
> users can still set only one xattr (the first set in the xattr array) where
> previously they called security_old_inode_init_security().
>
> Furthermore, while EVM is invoked unlike before, its xattr will not be set
> as it would not be the first set in the xattr array, or if it is the first,
> there would not be protected xattrs to calculate the HMAC on.
>
> The second problem this patch set addresses is the limitation of the
> call_int_hook() of stopping the loop when the return value from a hook
> implementation is not zero. Unfortunately, for the inode_init_security hook
> it is a legitimate case to return -EOPNOTSUPP, but this would not
> necessarily mean that there is an error to report to the LSM infrastructure
> but just that an LSM does not will to set an xattr. Other LSMs should be
> still consulted as well.
>
> The solution for this specific case is to replace the call_int_hook() with
> the loop itself, so that -EOPNOTSUPP can be ignored.
>
> Next, this patch set removes the limitation of creating only two xattrs,
> one by an active LSM and another by EVM. This patch set extends the
> reservation mechanism of the LSM infrastructure, to allow each LSM to
> request one or multiple xattrs. While this could potentially lead to
> reaching the filesystem limits of number/size of the xattrs, it seems not
> an issue that need to be solved by the LSM infrastructure but by the
> filesystems themselves. Currently, if the limit is reached, the only
> workaround would be to use fewer LSMs.
>
> The reservation mechanism concept makes it very easy for LSMs to position
> themselves correctly in the xattr array, as the LSM infrastructure at
> initialization time changes the number of xattrs requested by each LSM with
> an offset. LSMs can just take that offset as the starting index in the
> xattr array and fill the next slots depending on how many xattrs they
> requested.
>
> However, while this concept is intuitive, it needs extra care. While for
> security blobs (the main reason of the reservation mechanism) it is not
> relevant for an LSM if other LSMs filled their portion, it matters for
> xattrs, as both EVM and initxattrs() callbacks scan the entire array until
> a terminator (xattr with NULL name). If an LSM did not provide an xattr,
> which could happen if it is loaded but not initialized, consumers of the
> xattr array would stop prematurely.
>
> This patch set avoids this problem by compacting the xattr array each time
> after an LSM executed its implementation of the inode_init_security hook.
> It needs to be done after each LSM, and not after all, since there might be
> LSMs scanning that xattr array too. Compacting the array after all LSMs
> would be too late.
>
> Finally, this patch set modifies the evm_inode_init_security() definition
> to be compatible with the inode_init_security hook definition and adds
> support for scanning the whole xattr array and for calculating the HMAC
> on all xattrs provided by LSMs.
>
> This patch set has been tested by introducing several instances of a
> TestLSM (some providing an xattr, some not, one with a wrong implementation
> to see how the LSM infrastructure handles it, one providing multiple xattrs
> and another providing an xattr but in a disabled state). The patch is not
> included in this set but it is available here:
>
> https://github.com/robertosassu/linux/commit/e13a03236df0c399dccb73df5fe4cfceb4bb1d89
>
> The test, added to ima-evm-utils, is available here:
>
> https://github.com/robertosassu/ima-evm-utils/blob/evm-multiple-lsms-v5-devel-v3/tests/evm_multiple_lsms.test
>
> The test takes a UML kernel built by Github Actions and launches it several
> times, each time with a different combination of LSMs and filesystems (ext4,
> reiserfs, ocfs2). After boot, it first checks that there is an xattr for each
> LSM providing it (for reiserfs and ocfs2 just the first LSM), and then (for
> ext4) calculates the HMAC in user space and compares it with the HMAC
> calculated by EVM in kernel space.
>
> A test report can be obtained here:
>
> https://github.com/robertosassu/ima-evm-utils/actions/runs/3525619568/jobs/5912560168
>
> The patch set has been tested with both the SElinux and Smack test suites.
> Below, there is the summary of the test results:
>
> SELinux Test Suite result (without patches):
> Files=73, Tests=1346, 225 wallclock secs ( 0.43 usr 0.23 sys + 6.11 cusr 58.70 csys = 65.47 CPU)
> Result: FAIL
> Failed 4/73 test programs. 13/1346 subtests failed.
>
> SELinux Test Suite result (with patches):
> Files=73, Tests=1346, 225 wallclock secs ( 0.44 usr 0.22 sys + 6.15 cusr 59.94 csys = 66.75 CPU)
> Result: FAIL
> Failed 4/73 test programs. 13/1346 subtests failed.
>
> Smack Test Suite result (without patches):
> 95 Passed, 0 Failed, 100% Success rate
>
> Smack Test Suite result (with patches):
> 95 Passed, 0 Failed, 100% Success rate
>
> Changelog
>
> v5:
> - Modify the cover letter to explain that the goal of this patch set is
> supporting multiple per LSM xattrs in EVM, and not moving IMA and EVM to
> the LSM infrastructure
> - Remove references in the patches description about moving IMA and EVM
> to the LSM infrastructure
> - Explain that the additional EVM invocation due to the switch to
> security_inode_init_security() will not cause the EVM xattr to be added
>
> v4:
> - Remove patch to call reiserfs_security_free(), already queued
> - Switch ocfs2 and reiserfs to security_inode_init_security() (suggested by
> Mimi)
> - Remove security_old_inode_init_security() (suggested by Paul)
> - Rename security_check_compact_xattrs() to
> security_check_compact_filled_xattrs() and add function description
> (suggested by Mimi)
> - Rename checked_xattrs parameter of security_check_compact_filled_xattrs()
> to num_filled_xattrs (suggested by Mimi)
> - Rename cur_xattrs variable in security_inode_init_security() to
> num_filled_xattrs (suggested by Mimi)
>
> v3:
> - Don't free the xattr name in reiserfs_security_free()
> - Don't include fs_data parameter in inode_init_security hook
> - Don't change evm_inode_init_security(), as it will be removed if EVM is
> stacked
> - Fix inode_init_security hook documentation
> - Drop lsm_find_xattr_slot(), use simple xattr reservation mechanism and
> introduce security_check_compact_xattrs() to compact the xattr array
> - Don't allocate xattr array if LSMs didn't reserve any xattr
> - Return zero if initxattrs() is not provided to
> security_inode_init_security(), -EOPNOTSUPP if value is not provided to
> security_old_inode_init_security()
> - Request LSMs to fill xattrs if only value (not the triple) is provided to
> security_old_inode_init_security(), to avoid unnecessary memory
> allocation
>
> v2:
> - rewrite selinux_old_inode_init_security() to use
> security_inode_init_security()
> - add lbs_xattr field to lsm_blob_sizes structure, to give the ability to
> LSMs to reserve slots in the xattr array (suggested by Casey)
> - add new parameter base_slot to inode_init_security hook definition
>
> v1:
> - add calls to reiserfs_security_free() and initialize sec->value to NULL
> (suggested by Tetsuo and Mimi)
> - change definition of inode_init_security hook, replace the name, value
> and len triple with the xattr array (suggested by Casey)
> - introduce lsm_find_xattr_slot() helper for LSMs to find an unused slot in
> the passed xattr array
>
> Roberto Sassu (6):
> reiserfs: Switch to security_inode_init_security()
> ocfs2: Switch to security_inode_init_security()
> security: Remove security_old_inode_init_security()
> security: Allow all LSMs to provide xattrs for inode_init_security
> hook
> evm: Align evm_inode_init_security() definition with LSM
> infrastructure
> evm: Support multiple LSMs providing an xattr
>
> fs/ocfs2/namei.c | 18 ++---
> fs/ocfs2/xattr.c | 30 +++++++-
> fs/reiserfs/xattr_security.c | 23 ++++--
> include/linux/evm.h | 12 +--
> include/linux/lsm_hook_defs.h | 3 +-
> include/linux/lsm_hooks.h | 17 ++--
> include/linux/security.h | 12 ---
> security/integrity/evm/evm.h | 2 +
> security/integrity/evm/evm_crypto.c | 9 ++-
> security/integrity/evm/evm_main.c | 28 +++++--
> security/security.c | 115 +++++++++++++++++++++-------
> security/selinux/hooks.c | 19 +++--
> security/smack/smack_lsm.c | 26 ++++---
> 13 files changed, 213 insertions(+), 101 deletions(-)
>