TPDA(Trace, Profiling and Diagnostics Aggregator) is
to provide packetization, funneling and timestamping of
TPDM data. Multiple monitors are connected to different
input ports of TPDA.This change is to add tpda
enable/disable/probe functions for coresight tpda driver.
- - - - - - - - - - - -
| TPDM 0| | TPDM 1 | | TPDM 2|
- - - - - - - - - - - -
| | |
|_ _ _ _ _ _ | _ _ _ _ |
| | |
| | |
------------------
| TPDA |
------------------
Signed-off-by: Tao Zhang <[email protected]>
Signed-off-by: Mao Jinlong <[email protected]>
---
drivers/hwtracing/coresight/Kconfig | 11 +
drivers/hwtracing/coresight/Makefile | 1 +
drivers/hwtracing/coresight/coresight-tpda.c | 206 +++++++++++++++++++
drivers/hwtracing/coresight/coresight-tpda.h | 35 ++++
4 files changed, 253 insertions(+)
create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c
create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
index b2b72a35e416..0cbebfd0d23e 100644
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -205,6 +205,7 @@ config CORESIGHT_TRBE
config CORESIGHT_TPDM
tristate "CoreSight Trace, Profiling & Diagnostics Monitor driver"
select CORESIGHT_LINKS_AND_SINKS
+ select CORESIGHT_TPDA
help
This driver provides support for configuring monitor. Monitors are
primarily responsible for data set collection and support the
@@ -213,4 +214,14 @@ config CORESIGHT_TPDM
To compile this driver as a module, choose M here: the module will be
called coresight-tpdm.
+config CORESIGHT_TPDA
+ tristate "CoreSight Trace, Profiling & Diagnostics Aggregator driver"
+ help
+ This driver provides support for configuring aggregator. This is
+ primarily useful for pulling the data sets from one or more
+ attached monitors and pushing the resultant data out. Multiple
+ monitors are connected on different input ports of TPDA.
+
+ To compile this driver as a module, choose M here: the module will be
+ called coresight-tpda.
endif
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
index 6bb9b1746bc7..1712d82e7260 100644
--- a/drivers/hwtracing/coresight/Makefile
+++ b/drivers/hwtracing/coresight/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o
obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o
obj-$(CONFIG_CORESIGHT_TPDM) += coresight-tpdm.o
+obj-$(CONFIG_CORESIGHT_TPDA) += coresight-tpda.o
coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
coresight-cti-sysfs.o
diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c
new file mode 100644
index 000000000000..7a0478a8b63e
--- /dev/null
+++ b/drivers/hwtracing/coresight/coresight-tpda.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/bitfield.h>
+#include <linux/coresight.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "coresight-priv.h"
+#include "coresight-tpda.h"
+#include "coresight-trace-id.h"
+
+DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda");
+
+/* Settings pre enabling port control register */
+static void tpda_enable_pre_port(struct tpda_drvdata *drvdata)
+{
+ u32 val;
+
+ val = readl_relaxed(drvdata->base + TPDA_CR);
+ val |= FIELD_PREP(TPDA_CR_ATID, drvdata->atid);
+ writel_relaxed(val, drvdata->base + TPDA_CR);
+}
+
+static void tpda_enable_port(struct tpda_drvdata *drvdata, int port)
+{
+ u32 val;
+
+ val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port));
+ /* Enable the port */
+ val |= TPDA_Pn_CR_ENA;
+ writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port));
+}
+
+static void __tpda_enable(struct tpda_drvdata *drvdata, int port)
+{
+ CS_UNLOCK(drvdata->base);
+
+ if (!drvdata->csdev->enable)
+ tpda_enable_pre_port(drvdata);
+
+ tpda_enable_port(drvdata, port);
+
+ CS_LOCK(drvdata->base);
+}
+
+static int tpda_enable(struct coresight_device *csdev, int inport, int outport)
+{
+ struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
+
+ spin_lock(&drvdata->spinlock);
+ if (atomic_read(&csdev->refcnt[inport]) == 0)
+ __tpda_enable(drvdata, inport);
+
+ atomic_inc(&csdev->refcnt[inport]);
+ spin_unlock(&drvdata->spinlock);
+
+ dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", inport);
+ return 0;
+}
+
+static void __tpda_disable(struct tpda_drvdata *drvdata, int port)
+{
+ u32 val;
+
+ CS_UNLOCK(drvdata->base);
+
+ val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port));
+ val &= ~TPDA_Pn_CR_ENA;
+ writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port));
+
+ CS_LOCK(drvdata->base);
+}
+
+static void tpda_disable(struct coresight_device *csdev, int inport,
+ int outport)
+{
+ struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
+
+ spin_lock(&drvdata->spinlock);
+ if (atomic_dec_return(&csdev->refcnt[inport]) == 0)
+ __tpda_disable(drvdata, inport);
+
+ spin_unlock(&drvdata->spinlock);
+
+ dev_dbg(drvdata->dev, "TPDA inport %d disabled\n", inport);
+}
+
+static const struct coresight_ops_link tpda_link_ops = {
+ .enable = tpda_enable,
+ .disable = tpda_disable,
+};
+
+static const struct coresight_ops tpda_cs_ops = {
+ .link_ops = &tpda_link_ops,
+};
+
+static int tpda_init_default_data(struct tpda_drvdata *drvdata)
+{
+ int atid;
+ /*
+ * TPDA must has a unique atid. This atid can uniquely
+ * identify the TPDM trace source connected to the TPDA.
+ */
+ atid = coresight_trace_id_get_system_id(coresight_get_trace_id_map());
+ if (atid < 0)
+ return atid;
+
+ drvdata->atid = atid;
+ return 0;
+}
+
+static int tpda_probe(struct amba_device *adev, const struct amba_id *id)
+{
+ int ret;
+ struct device *dev = &adev->dev;
+ struct coresight_platform_data *pdata;
+ struct tpda_drvdata *drvdata;
+ struct coresight_desc desc = { 0 };
+ void __iomem *base;
+
+ pdata = coresight_get_platform_data(dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ adev->dev.platform_data = pdata;
+
+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ drvdata->dev = &adev->dev;
+ dev_set_drvdata(dev, drvdata);
+
+ base = devm_ioremap_resource(dev, &adev->res);
+ if (!base)
+ return -ENOMEM;
+ drvdata->base = base;
+
+ spin_lock_init(&drvdata->spinlock);
+
+ ret = tpda_init_default_data(drvdata);
+ if (ret)
+ return ret;
+
+ desc.name = coresight_alloc_device_name(&tpda_devs, dev);
+ if (!desc.name)
+ return -ENOMEM;
+ desc.type = CORESIGHT_DEV_TYPE_LINK;
+ desc.subtype.link_subtype = CORESIGHT_DEV_SUBTYPE_LINK_MERG;
+ desc.ops = &tpda_cs_ops;
+ desc.pdata = adev->dev.platform_data;
+ desc.dev = &adev->dev;
+ desc.access = CSDEV_ACCESS_IOMEM(base);
+ drvdata->csdev = coresight_register(&desc);
+ if (IS_ERR(drvdata->csdev))
+ return PTR_ERR(drvdata->csdev);
+
+ pm_runtime_put(&adev->dev);
+
+ dev_dbg(drvdata->dev, "TPDA initialized\n");
+ return 0;
+}
+
+static void __exit tpda_remove(struct amba_device *adev)
+{
+ struct tpda_drvdata *drvdata = dev_get_drvdata(&adev->dev);
+
+ coresight_unregister(drvdata->csdev);
+}
+
+/*
+ * Different TPDA has different periph id.
+ * The difference is 0-7 bits' value. So ignore 0-7 bits.
+ */
+static struct amba_id tpda_ids[] = {
+ {
+ .id = 0x000f0f00,
+ .mask = 0x000fff00,
+ },
+ { 0, 0},
+};
+
+static struct amba_driver tpda_driver = {
+ .drv = {
+ .name = "coresight-tpda",
+ .owner = THIS_MODULE,
+ .suppress_bind_attrs = true,
+ },
+ .probe = tpda_probe,
+ .remove = tpda_remove,
+ .id_table = tpda_ids,
+};
+
+module_amba_driver(tpda_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Trace, Profiling & Diagnostic Aggregator driver");
diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h
new file mode 100644
index 000000000000..4beb33263c96
--- /dev/null
+++ b/drivers/hwtracing/coresight/coresight-tpda.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _CORESIGHT_CORESIGHT_TPDA_H
+#define _CORESIGHT_CORESIGHT_TPDA_H
+
+#define TPDA_CR (0x000)
+#define TPDA_Pn_CR(n) (0x004 + (n * 4))
+/* Aggregator port enable bit */
+#define TPDA_Pn_CR_ENA BIT(0)
+
+#define TPDA_MAX_INPORTS 32
+
+/* Bits 6 ~ 12 is for atid value */
+#define TPDA_CR_ATID GENMASK(12, 6)
+
+/**
+ * struct tpda_drvdata - specifics associated to an TPDA component
+ * @base: memory mapped base address for this component.
+ * @dev: The device entity associated to this component.
+ * @csdev: component vitals needed by the framework.
+ * @spinlock: lock for the drvdata value.
+ * @enable: enable status of the component.
+ */
+struct tpda_drvdata {
+ void __iomem *base;
+ struct device *dev;
+ struct coresight_device *csdev;
+ spinlock_t spinlock;
+ u8 atid;
+};
+
+#endif /* _CORESIGHT_CORESIGHT_TPDA_H */
--
2.17.1
On 20/06/2022 13:00, Mao Jinlong wrote:
> TPDA(Trace, Profiling and Diagnostics Aggregator) is
> to provide packetization, funneling and timestamping of
> TPDM data. Multiple monitors are connected to different
> input ports of TPDA.This change is to add tpda
> enable/disable/probe functions for coresight tpda driver.
>
> - - - - - - - - - - - -
> | TPDM 0| | TPDM 1 | | TPDM 2|
> - - - - - - - - - - - -
> | | |
> |_ _ _ _ _ _ | _ _ _ _ |
> | | |
> | | |
> ------------------
> | TPDA |
> ------------------
>
> Signed-off-by: Tao Zhang <[email protected]>
> Signed-off-by: Mao Jinlong <[email protected]>
> ---
> drivers/hwtracing/coresight/Kconfig | 11 +
> drivers/hwtracing/coresight/Makefile | 1 +
> drivers/hwtracing/coresight/coresight-tpda.c | 206 +++++++++++++++++++
> drivers/hwtracing/coresight/coresight-tpda.h | 35 ++++
> 4 files changed, 253 insertions(+)
> create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c
> create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h
>
> diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
> index b2b72a35e416..0cbebfd0d23e 100644
> --- a/drivers/hwtracing/coresight/Kconfig
> +++ b/drivers/hwtracing/coresight/Kconfig
> @@ -205,6 +205,7 @@ config CORESIGHT_TRBE
> config CORESIGHT_TPDM
> tristate "CoreSight Trace, Profiling & Diagnostics Monitor driver"
> select CORESIGHT_LINKS_AND_SINKS
> + select CORESIGHT_TPDA
> help
> This driver provides support for configuring monitor. Monitors are
> primarily responsible for data set collection and support the
> @@ -213,4 +214,14 @@ config CORESIGHT_TPDM
> To compile this driver as a module, choose M here: the module will be
> called coresight-tpdm.
>
> +config CORESIGHT_TPDA
> + tristate "CoreSight Trace, Profiling & Diagnostics Aggregator driver"
> + help
> + This driver provides support for configuring aggregator. This is
> + primarily useful for pulling the data sets from one or more
> + attached monitors and pushing the resultant data out. Multiple
> + monitors are connected on different input ports of TPDA.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called coresight-tpda.
> endif
> diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
> index 6bb9b1746bc7..1712d82e7260 100644
> --- a/drivers/hwtracing/coresight/Makefile
> +++ b/drivers/hwtracing/coresight/Makefile
> @@ -26,5 +26,6 @@ obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o
> obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
> obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o
> obj-$(CONFIG_CORESIGHT_TPDM) += coresight-tpdm.o
> +obj-$(CONFIG_CORESIGHT_TPDA) += coresight-tpda.o
> coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
> coresight-cti-sysfs.o
> diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c
> new file mode 100644
> index 000000000000..7a0478a8b63e
> --- /dev/null
> +++ b/drivers/hwtracing/coresight/coresight-tpda.c
> @@ -0,0 +1,206 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/amba/bus.h>
> +#include <linux/bitfield.h>
> +#include <linux/coresight.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/fs.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#include "coresight-priv.h"
> +#include "coresight-tpda.h"
> +#include "coresight-trace-id.h"
> +
> +DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda");
> +
> +/* Settings pre enabling port control register */
> +static void tpda_enable_pre_port(struct tpda_drvdata *drvdata)
> +{
> + u32 val;
> +
> + val = readl_relaxed(drvdata->base + TPDA_CR);
Even though the drvdata->atid is constant during the life time
of the driver, I would recommend clearing the field and then
setting it. e.g, if you get a different ATID on unload-load
sequence of the driver, the field will corrupted.
val &= ~TPDA_CR_ATID;
> + val |= FIELD_PREP(TPDA_CR_ATID, drvdata->atid);
> + writel_relaxed(val, drvdata->base + TPDA_CR);
> +}
> +
Is there no global turn-ON for the TPDA ? Or is it per-port
enable only via TPDA_Pn_CR ?
> +static void tpda_enable_port(struct tpda_drvdata *drvdata, int port)
> +{
> + u32 val;
> +
> + val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port));
> + /* Enable the port */
> + val |= TPDA_Pn_CR_ENA;
> + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port));
> +}
> +
> +static void __tpda_enable(struct tpda_drvdata *drvdata, int port)
> +{
> + CS_UNLOCK(drvdata->base);
> +
> + if (!drvdata->csdev->enable)
> + tpda_enable_pre_port(drvdata);
> +
> + tpda_enable_port(drvdata, port);
> +
> + CS_LOCK(drvdata->base);
> +}
> +
> +static int tpda_enable(struct coresight_device *csdev, int inport, int outport)
> +{
> + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
> +
> + spin_lock(&drvdata->spinlock);
> + if (atomic_read(&csdev->refcnt[inport]) == 0)
> + __tpda_enable(drvdata, inport);
> +
> + atomic_inc(&csdev->refcnt[inport]);
> + spin_unlock(&drvdata->spinlock);
> +
> + dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", inport);
> + return 0;
> +}
> +
> +static void __tpda_disable(struct tpda_drvdata *drvdata, int port)
> +{
> + u32 val;
> +
> + CS_UNLOCK(drvdata->base);
> +
> + val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port));
> + val &= ~TPDA_Pn_CR_ENA;
> + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port));
> +
> + CS_LOCK(drvdata->base);
> +}
> +
> +static void tpda_disable(struct coresight_device *csdev, int inport,
> + int outport)
> +{
> + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
> +
> + spin_lock(&drvdata->spinlock);
> + if (atomic_dec_return(&csdev->refcnt[inport]) == 0)
> + __tpda_disable(drvdata, inport);
> +
> + spin_unlock(&drvdata->spinlock);
> +
> + dev_dbg(drvdata->dev, "TPDA inport %d disabled\n", inport);
> +}
> +
> +static const struct coresight_ops_link tpda_link_ops = {
> + .enable = tpda_enable,
> + .disable = tpda_disable,
> +};
> +
> +static const struct coresight_ops tpda_cs_ops = {
> + .link_ops = &tpda_link_ops,
> +};
> +
> +static int tpda_init_default_data(struct tpda_drvdata *drvdata)
> +{
Is there a register that indicates the number of ports on the device ?
We don't seem to be using that information.
> + int atid;
> + /*
> + * TPDA must has a unique atid. This atid can uniquely
> + * identify the TPDM trace source connected to the TPDA.
> + */
> + atid = coresight_trace_id_get_system_id(coresight_get_trace_id_map());
> + if (atid < 0)
> + return atid;
> +
You need to release this id at module exit. Otherwise, we are leaking
the id.
Suzuki
Hi Suzuki,
Thanks for the review.
On 7/1/2022 6:24 PM, Suzuki K Poulose wrote:
> On 20/06/2022 13:00, Mao Jinlong wrote:
>> TPDA(Trace, Profiling and Diagnostics Aggregator) is
>> to provide packetization, funneling and timestamping of
>> TPDM data. Multiple monitors are connected to different
>> input ports of TPDA.This change is to add tpda
>> enable/disable/probe functions for coresight tpda driver.
>>
>> - - - - - - - - - - - -
>> | TPDM 0| | TPDM 1 | | TPDM 2|
>> - - - - - - - - - - - -
>> | | |
>> |_ _ _ _ _ _ | _ _ _ _ |
>> | | |
>> | | |
>> ------------------
>> | TPDA |
>> ------------------
>>
>> Signed-off-by: Tao Zhang <[email protected]>
>> Signed-off-by: Mao Jinlong <[email protected]>
>> ---
>> drivers/hwtracing/coresight/Kconfig | 11 +
>> drivers/hwtracing/coresight/Makefile | 1 +
>> drivers/hwtracing/coresight/coresight-tpda.c | 206 +++++++++++++++++++
>> drivers/hwtracing/coresight/coresight-tpda.h | 35 ++++
>> 4 files changed, 253 insertions(+)
>> create mode 100644 drivers/hwtracing/coresight/coresight-tpda.c
>> create mode 100644 drivers/hwtracing/coresight/coresight-tpda.h
>>
>> diff --git a/drivers/hwtracing/coresight/Kconfig
>> b/drivers/hwtracing/coresight/Kconfig
>> index b2b72a35e416..0cbebfd0d23e 100644
>> --- a/drivers/hwtracing/coresight/Kconfig
>> +++ b/drivers/hwtracing/coresight/Kconfig
>> @@ -205,6 +205,7 @@ config CORESIGHT_TRBE
>> config CORESIGHT_TPDM
>> tristate "CoreSight Trace, Profiling & Diagnostics Monitor driver"
>> select CORESIGHT_LINKS_AND_SINKS
>> + select CORESIGHT_TPDA
>> help
>> This driver provides support for configuring monitor.
>> Monitors are
>> primarily responsible for data set collection and support the
>> @@ -213,4 +214,14 @@ config CORESIGHT_TPDM
>> To compile this driver as a module, choose M here: the module
>> will be
>> called coresight-tpdm.
>> +config CORESIGHT_TPDA
>> + tristate "CoreSight Trace, Profiling & Diagnostics Aggregator
>> driver"
>> + help
>> + This driver provides support for configuring aggregator. This is
>> + primarily useful for pulling the data sets from one or more
>> + attached monitors and pushing the resultant data out. Multiple
>> + monitors are connected on different input ports of TPDA.
>> +
>> + To compile this driver as a module, choose M here: the module
>> will be
>> + called coresight-tpda.
>> endif
>> diff --git a/drivers/hwtracing/coresight/Makefile
>> b/drivers/hwtracing/coresight/Makefile
>> index 6bb9b1746bc7..1712d82e7260 100644
>> --- a/drivers/hwtracing/coresight/Makefile
>> +++ b/drivers/hwtracing/coresight/Makefile
>> @@ -26,5 +26,6 @@ obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o
>> obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o
>> obj-$(CONFIG_CORESIGHT_TRBE) += coresight-trbe.o
>> obj-$(CONFIG_CORESIGHT_TPDM) += coresight-tpdm.o
>> +obj-$(CONFIG_CORESIGHT_TPDA) += coresight-tpda.o
>> coresight-cti-y := coresight-cti-core.o coresight-cti-platform.o \
>> coresight-cti-sysfs.o
>> diff --git a/drivers/hwtracing/coresight/coresight-tpda.c
>> b/drivers/hwtracing/coresight/coresight-tpda.c
>> new file mode 100644
>> index 000000000000..7a0478a8b63e
>> --- /dev/null
>> +++ b/drivers/hwtracing/coresight/coresight-tpda.c
>> @@ -0,0 +1,206 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights
>> reserved.
>> + */
>> +
>> +#include <linux/amba/bus.h>
>> +#include <linux/bitfield.h>
>> +#include <linux/coresight.h>
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/fs.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "coresight-priv.h"
>> +#include "coresight-tpda.h"
>> +#include "coresight-trace-id.h"
>> +
>> +DEFINE_CORESIGHT_DEVLIST(tpda_devs, "tpda");
>> +
>> +/* Settings pre enabling port control register */
>> +static void tpda_enable_pre_port(struct tpda_drvdata *drvdata)
>> +{
>> + u32 val;
>> +
>> + val = readl_relaxed(drvdata->base + TPDA_CR);
>
>
> Even though the drvdata->atid is constant during the life time
> of the driver, I would recommend clearing the field and then
> setting it. e.g, if you get a different ATID on unload-load
> sequence of the driver, the field will corrupted.
I will release the id in module exist function.
>
> val &= ~TPDA_CR_ATID;
>
>> + val |= FIELD_PREP(TPDA_CR_ATID, drvdata->atid);
>
>
>> + writel_relaxed(val, drvdata->base + TPDA_CR);
>> +}
>> +
>
> Is there no global turn-ON for the TPDA ? Or is it per-port
> enable only via TPDA_Pn_CR ?
No global turn-on for the TPDA. It is per-port enable via TPDA_Pn_CR.
>
>> +static void tpda_enable_port(struct tpda_drvdata *drvdata, int port)
>> +{
>> + u32 val;
>> +
>> + val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port));
>> + /* Enable the port */
>> + val |= TPDA_Pn_CR_ENA;
>> + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port));
>> +}
>> +
>> +static void __tpda_enable(struct tpda_drvdata *drvdata, int port)
>> +{
>> + CS_UNLOCK(drvdata->base);
>> +
>> + if (!drvdata->csdev->enable)
>> + tpda_enable_pre_port(drvdata);
>> +
>> + tpda_enable_port(drvdata, port);
>> +
>> + CS_LOCK(drvdata->base);
>> +}
>> +
>> +static int tpda_enable(struct coresight_device *csdev, int inport,
>> int outport)
>> +{
>> + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
>> +
>> + spin_lock(&drvdata->spinlock);
>> + if (atomic_read(&csdev->refcnt[inport]) == 0)
>> + __tpda_enable(drvdata, inport);
>> +
>> + atomic_inc(&csdev->refcnt[inport]);
>> + spin_unlock(&drvdata->spinlock);
>> +
>> + dev_dbg(drvdata->dev, "TPDA inport %d enabled.\n", inport);
>> + return 0;
>> +}
>> +
>> +static void __tpda_disable(struct tpda_drvdata *drvdata, int port)
>> +{
>> + u32 val;
>> +
>> + CS_UNLOCK(drvdata->base);
>> +
>> + val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port));
>> + val &= ~TPDA_Pn_CR_ENA;
>> + writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port));
>> +
>> + CS_LOCK(drvdata->base);
>> +}
>> +
>> +static void tpda_disable(struct coresight_device *csdev, int inport,
>> + int outport)
>> +{
>> + struct tpda_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
>> +
>> + spin_lock(&drvdata->spinlock);
>> + if (atomic_dec_return(&csdev->refcnt[inport]) == 0)
>> + __tpda_disable(drvdata, inport);
>> +
>> + spin_unlock(&drvdata->spinlock);
>> +
>> + dev_dbg(drvdata->dev, "TPDA inport %d disabled\n", inport);
>> +}
>> +
>> +static const struct coresight_ops_link tpda_link_ops = {
>> + .enable = tpda_enable,
>> + .disable = tpda_disable,
>> +};
>> +
>> +static const struct coresight_ops tpda_cs_ops = {
>> + .link_ops = &tpda_link_ops,
>> +};
>> +
>> +static int tpda_init_default_data(struct tpda_drvdata *drvdata)
>> +{
>
> Is there a register that indicates the number of ports on the device ?
> We don't seem to be using that information.
No such register.
>
>> + int atid;
>> + /*
>> + * TPDA must has a unique atid. This atid can uniquely
>> + * identify the TPDM trace source connected to the TPDA.
>> + */
>> + atid =
>> coresight_trace_id_get_system_id(coresight_get_trace_id_map());
>> + if (atid < 0)
>> + return atid;
>> +
>
> You need to release this id at module exit. Otherwise, we are leaking
> the id.
>
I will address the comments.
>
> Suzuki