From: Angelo Dureghello <[email protected]>
The adi,gain-scaling-p/n values are an inverted log2,
so initial naming was set correctly, but the driver uses just
adi,gain-scaling-p/n, and if fdt is created accordingly with
the fdt bindings documentation, driver fails the probe.
Observing that:
- the Linux driver is the only consumer,
- there are no upstreamed dts nodes related to ad3552r,
the fix to the documentation side is preferred and less-risk.
Fixes: b0a96c5f599e ("dt-bindings: iio: dac: Add adi,ad3552r.yaml")
Signed-off-by: Angelo Dureghello <[email protected]>
---
Changes for v2:
- better explanation in the commit notes
---
.../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index 8265d709094d..4e9f80445405 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -92,13 +92,13 @@ patternProperties:
maximum: 511
minimum: -511
- adi,gain-scaling-p-inv-log2:
- description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
+ adi,gain-scaling-p:
+ description: GainP = 1 / ( 2 ^ adi,gain-scaling-p)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
- adi,gain-scaling-n-inv-log2:
- description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
+ adi,gain-scaling-n:
+ description: GainN = 1 / ( 2 ^ adi,gain-scaling-n)
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
@@ -107,8 +107,8 @@ patternProperties:
required:
- adi,gain-offset
- - adi,gain-scaling-p-inv-log2
- - adi,gain-scaling-n-inv-log2
+ - adi,gain-scaling-p
+ - adi,gain-scaling-n
- adi,rfb-ohms
required:
@@ -208,8 +208,8 @@ examples:
reg = <1>;
custom-output-range-config {
adi,gain-offset = <5>;
- adi,gain-scaling-p-inv-log2 = <1>;
- adi,gain-scaling-n-inv-log2 = <2>;
+ adi,gain-scaling-p = <1>;
+ adi,gain-scaling-n = <2>;
adi,rfb-ohms = <1>;
};
};
--
2.45.0.rc1
On 22/05/2024 17:01, Angelo Dureghello wrote:
> From: Angelo Dureghello <[email protected]>
>
> The adi,gain-scaling-p/n values are an inverted log2,
> so initial naming was set correctly, but the driver uses just
> adi,gain-scaling-p/n, and if fdt is created accordingly with
> the fdt bindings documentation, driver fails the probe.
>
> Observing that:
> - the Linux driver is the only consumer,
> - there are no upstreamed dts nodes related to ad3552r,
>
> the fix to the documentation side is preferred and less-risk.
>
> Fixes: b0a96c5f599e ("dt-bindings: iio: dac: Add adi,ad3552r.yaml")
> Signed-off-by: Angelo Dureghello <[email protected]>
> ---
> Changes for v2:
> - better explanation in the commit notes
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof