This is the start of the stable review cycle for the 4.10.13 release.
There are 24 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu Apr 27 15:08:24 UTC 2017.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.10.13-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.10.13-rc1
Dan Williams <[email protected]>
device-dax: switch to srcu, fix rcu_read_lock() vs pte allocation
Yazen Ghannam <[email protected]>
x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRs
Ravi Bangoria <[email protected]>
powerpc/kprobe: Fix oops when kprobed on 'stdu' instruction
Sebastian Siewior <[email protected]>
ubi/upd: Always flush after prepared for an update
Vishal Verma <[email protected]>
x86/mce: Make the MCE notifier a blocking one
Johannes Berg <[email protected]>
mac80211: fix MU-MIMO follow-MAC mode
Johannes Berg <[email protected]>
mac80211: reject ToDS broadcast data frames
Richard Weinberger <[email protected]>
ubifs: Fix O_TMPFILE corner case in ubifs_link()
Felix Fietkau <[email protected]>
ubifs: Fix RENAME_WHITEOUT support
Haibo Chen <[email protected]>
mmc: sdhci-esdhc-imx: increase the pad I/O drive strength for DDR50 card
Douglas Anderson <[email protected]>
mmc: dw_mmc: Don't allow Runtime PM for SDIO cards
Arnd Bergmann <[email protected]>
ACPI / power: Avoid maybe-uninitialized warning
Thorsten Leemhuis <[email protected]>
Input: elantech - add Fujitsu Lifebook E547 to force crc_enabled
Christian Borntraeger <[email protected]>
s390/mm: fix CMMA vs KSM vs others
Shawn Lin <[email protected]>
mmc: dw_mmc: silent verbose log when calling from PM context
Germano Percossi <[email protected]>
CIFS: remove bad_network_name flag
Sachin Prabhu <[email protected]>
cifs: Do not send echoes before Negotiate is complete
Rabin Vincent <[email protected]>
mm: prevent NR_ISOLATE_* stats from going negative
Steven Rostedt (VMware) <[email protected]>
ring-buffer: Have ring_buffer_iter_empty() return true when empty
Jason Gerecke <[email protected]>
HID: wacom: Treat HID_DG_TOOLSERIALNUMBER as unsigned
Steven Rostedt (VMware) <[email protected]>
tracing: Allocate the snapshot buffer before enabling probe
Eric Biggers <[email protected]>
KEYS: fix keyctl_set_reqkey_keyring() to not leak thread keyrings
David Howells <[email protected]>
KEYS: Change the name of the dead type to ".dead" to prevent user access
David Howells <[email protected]>
KEYS: Disallow keyrings beginning with '.' to be joined as session keyrings
-------------
Diffstat:
Makefile | 4 +-
arch/powerpc/kernel/entry_64.S | 6 +--
arch/s390/include/asm/pgtable.h | 2 +
arch/x86/kernel/cpu/mcheck/mce-genpool.c | 2 +-
arch/x86/kernel/cpu/mcheck/mce-internal.h | 2 +-
arch/x86/kernel/cpu/mcheck/mce.c | 17 ++----
arch/x86/kernel/cpu/mcheck/mce_amd.c | 2 +-
drivers/acpi/power.c | 1 +
drivers/dax/Kconfig | 1 +
drivers/dax/dax.c | 13 ++---
drivers/hid/wacom_wac.c | 2 +-
drivers/input/mouse/elantech.c | 8 +++
drivers/mmc/host/dw_mmc.c | 23 ++++++---
drivers/mmc/host/sdhci-esdhc-imx.c | 1 +
drivers/mtd/ubi/upd.c | 8 +--
fs/cifs/cifsglob.h | 1 -
fs/cifs/smb1ops.c | 10 ++++
fs/cifs/smb2pdu.c | 5 --
fs/ubifs/dir.c | 10 ++--
kernel/trace/ring_buffer.c | 16 +++++-
kernel/trace/trace.c | 8 +--
mm/migrate.c | 2 +-
net/mac80211/rx.c | 86 ++++++++++++++++++++++++-------
security/keys/gc.c | 2 +-
security/keys/keyctl.c | 20 +++----
security/keys/process_keys.c | 44 ++++++++++------
26 files changed, 196 insertions(+), 100 deletions(-)
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit fe8c470ab87d90e4b5115902dd94eced7e3305c3 upstream.
gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state()
is enterered at least once, so it assumes that cur_state might not get
initialized:
drivers/acpi/power.c: In function 'acpi_power_get_inferred_state':
drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This sets the variable to zero at the start of the loop, to ensure that
there is well-defined behavior even for an empty list. This gets rid of
the warning.
The warning first showed up when the -Os flag got removed in a bug fix
patch in linux-4.11-rc5.
I would suggest merging this addon patch on top of that bug fix to avoid
introducing a new warning in the stable kernels.
Fixes: 61b79e16c68d (ACPI: Fix incompatibility with mcount-based function graph tracing)
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/power.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -200,6 +200,7 @@ static int acpi_power_get_list_state(str
return -EINVAL;
/* The state of the list is 'on' IFF all resources are 'on'. */
+ cur_state = 0;
list_for_each_entry(entry, list, node) {
struct acpi_power_resource *resource = entry->resource;
acpi_handle handle = resource->device.handle;
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Haibo Chen <[email protected]>
commit 9f327845358d3dd0d8a5a7a5436b0aa5c432e757 upstream.
Currently for DDR50 card, it need tuning in default. We meet tuning fail
issue for DDR50 card and some data CRC error when DDR50 sd card works.
This is because the default pad I/O drive strength can't make sure DDR50
card work stable. So increase the pad I/O drive strength for DDR50 card,
and use pins_100mhz.
This fixes DDR50 card support for IMX since DDR50 tuning was enabled from
commit 9faac7b95ea4 ("mmc: sdhci: enable tuning for DDR50")
Tested-and-reported-by: Tim Harvey <[email protected]>
Signed-off-by: Haibo Chen <[email protected]>
Acked-by: Dong Aisheng <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -830,6 +830,7 @@ static int esdhc_change_pinstate(struct
switch (uhs) {
case MMC_TIMING_UHS_SDR50:
+ case MMC_TIMING_UHS_DDR50:
pinctrl = imx_data->pins_100mhz;
break;
case MMC_TIMING_UHS_SDR104:
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Weinberger <[email protected]>
commit 32fe905c17f001c0eee13c59afddd0bf2eed509c upstream.
It is perfectly fine to link a tmpfile back using linkat().
Since tmpfiles are created with a link count of 0 they appear
on the orphan list, upon re-linking the inode has to be removed
from the orphan list again.
Ralph faced a filesystem corruption in combination with overlayfs
due to this bug.
Cc: Ralph Sennhauser <[email protected]>
Cc: Amir Goldstein <[email protected]>
Reported-by: Ralph Sennhauser <[email protected]>
Tested-by: Ralph Sennhauser <[email protected]>
Reported-by: Amir Goldstein <[email protected]>
Fixes: 474b93704f321 ("ubifs: Implement O_TMPFILE")
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -748,6 +748,11 @@ static int ubifs_link(struct dentry *old
goto out_fname;
lock_2_inodes(dir, inode);
+
+ /* Handle O_TMPFILE corner case, it is allowed to link a O_TMPFILE. */
+ if (inode->i_nlink == 0)
+ ubifs_delete_orphan(c, inode->i_ino);
+
inc_nlink(inode);
ihold(inode);
inode->i_ctime = ubifs_current_time(inode);
@@ -768,6 +773,8 @@ out_cancel:
dir->i_size -= sz_change;
dir_ui->ui_size = dir->i_size;
drop_nlink(inode);
+ if (inode->i_nlink == 0)
+ ubifs_add_orphan(c, inode->i_ino);
unlock_2_inodes(dir, inode);
ubifs_release_budget(c, &req);
iput(inode);
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Siewior <[email protected]>
commit 9cd9a21ce070be8a918ffd3381468315a7a76ba6 upstream.
In commit 6afaf8a484cb ("UBI: flush wl before clearing update marker") I
managed to trigger and fix a similar bug. Now here is another version of
which I assumed it wouldn't matter back then but it turns out UBI has a
check for it and will error out like this:
|ubi0 warning: validate_vid_hdr: inconsistent used_ebs
|ubi0 error: validate_vid_hdr: inconsistent VID header at PEB 592
All you need to trigger this is? "ubiupdatevol /dev/ubi0_0 file" + a
powercut in the middle of the operation.
ubi_start_update() sets the update-marker and puts all EBs on the erase
list. After that userland can proceed to write new data while the old EB
aren't erased completely. A powercut at this point is usually not that
much of a tragedy. UBI won't give read access to the static volume
because it has the update marker. It will most likely set the corrupted
flag because it misses some EBs.
So we are all good. Unless the size of the image that has been written
differs from the old image in the magnitude of at least one EB. In that
case UBI will find two different values for `used_ebs' and refuse to
attach the image with the error message mentioned above.
So in order not to get in the situation, the patch will ensure that we
wait until everything is removed before it tries to write any data.
The alternative would be to detect such a case and remove all EBs at the
attached time after we processed the volume-table and see the
update-marker set. The patch looks bigger and I doubt it is worth it
since usually the write() will wait from time to time for a new EB since
usually there not that many spare EB that can be used.
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/ubi/upd.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -148,11 +148,11 @@ int ubi_start_update(struct ubi_device *
return err;
}
- if (bytes == 0) {
- err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
- if (err)
- return err;
+ err = ubi_wl_flush(ubi, UBI_ALL, UBI_ALL);
+ if (err)
+ return err;
+ if (bytes == 0) {
err = clear_update_marker(ubi, vol, 0);
if (err)
return err;
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 956a4cd2c957acf638ff29951aabaa9d8e92bbc2 upstream.
The following warning triggers with a new unit test that stresses the
device-dax interface.
===============================
[ ERR: suspicious RCU usage. ]
4.11.0-rc4+ #1049 Tainted: G O
-------------------------------
./include/linux/rcupdate.h:521 Illegal context switch in RCU read-side critical section!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 0
2 locks held by fio/9070:
#0: (&mm->mmap_sem){++++++}, at: [<ffffffff8d0739d7>] __do_page_fault+0x167/0x4f0
#1: (rcu_read_lock){......}, at: [<ffffffffc03fbd02>] dax_dev_huge_fault+0x32/0x620 [dax]
Call Trace:
dump_stack+0x86/0xc3
lockdep_rcu_suspicious+0xd7/0x110
___might_sleep+0xac/0x250
__might_sleep+0x4a/0x80
__alloc_pages_nodemask+0x23a/0x360
alloc_pages_current+0xa1/0x1f0
pte_alloc_one+0x17/0x80
__pte_alloc+0x1e/0x120
__get_locked_pte+0x1bf/0x1d0
insert_pfn.isra.70+0x3a/0x100
? lookup_memtype+0xa6/0xd0
vm_insert_mixed+0x64/0x90
dax_dev_huge_fault+0x520/0x620 [dax]
? dax_dev_huge_fault+0x32/0x620 [dax]
dax_dev_fault+0x10/0x20 [dax]
__do_fault+0x1e/0x140
__handle_mm_fault+0x9af/0x10d0
handle_mm_fault+0x16d/0x370
? handle_mm_fault+0x47/0x370
__do_page_fault+0x28c/0x4f0
trace_do_page_fault+0x58/0x2a0
do_async_page_fault+0x1a/0xa0
async_page_fault+0x28/0x30
Inserting a page table entry may trigger an allocation while we are
holding a read lock to keep the device instance alive for the duration
of the fault. Use srcu for this keep-alive protection.
Fixes: dee410792419 ("/dev/dax, core: file operations and dax-mmap")
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dax/Kconfig | 1 +
drivers/dax/dax.c | 13 +++++++------
2 files changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/dax/Kconfig
+++ b/drivers/dax/Kconfig
@@ -2,6 +2,7 @@ menuconfig DEV_DAX
tristate "DAX: direct access to differentiated memory"
default m if NVDIMM_DAX
depends on TRANSPARENT_HUGEPAGE
+ select SRCU
help
Support raw access to differentiated (persistence, bandwidth,
latency...) memory via an mmap(2) capable character
--- a/drivers/dax/dax.c
+++ b/drivers/dax/dax.c
@@ -24,6 +24,7 @@
#include "dax.h"
static dev_t dax_devt;
+DEFINE_STATIC_SRCU(dax_srcu);
static struct class *dax_class;
static DEFINE_IDA(dax_minor_ida);
static int nr_dax = CONFIG_NR_DEV_DAX;
@@ -59,7 +60,7 @@ struct dax_region {
* @region - parent region
* @dev - device backing the character device
* @cdev - core chardev data
- * @alive - !alive + rcu grace period == no new mappings can be established
+ * @alive - !alive + srcu grace period == no new mappings can be established
* @id - child id in the region
* @num_resources - number of physical address extents in this device
* @res - array of physical address ranges
@@ -530,7 +531,7 @@ static int __dax_dev_pmd_fault(struct da
static int dax_dev_pmd_fault(struct vm_area_struct *vma, unsigned long addr,
pmd_t *pmd, unsigned int flags)
{
- int rc;
+ int rc, id;
struct file *filp = vma->vm_file;
struct dax_dev *dax_dev = filp->private_data;
@@ -538,9 +539,9 @@ static int dax_dev_pmd_fault(struct vm_a
current->comm, (flags & FAULT_FLAG_WRITE)
? "write" : "read", vma->vm_start, vma->vm_end);
- rcu_read_lock();
+ id = srcu_read_lock(&dax_srcu);
rc = __dax_dev_pmd_fault(dax_dev, vma, addr, pmd, flags);
- rcu_read_unlock();
+ srcu_read_unlock(&dax_srcu, id);
return rc;
}
@@ -656,11 +657,11 @@ static void unregister_dax_dev(void *dev
* Note, rcu is not protecting the liveness of dax_dev, rcu is
* ensuring that any fault handlers that might have seen
* dax_dev->alive == true, have completed. Any fault handlers
- * that start after synchronize_rcu() has started will abort
+ * that start after synchronize_srcu() has started will abort
* upon seeing dax_dev->alive == false.
*/
dax_dev->alive = false;
- synchronize_rcu();
+ synchronize_srcu(&dax_srcu);
unmap_mapping_range(dax_dev->inode->i_mapping, 0, 0, 1);
cdev_del(cdev);
device_unregister(dev);
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) <[email protected]>
commit 78f7a45dac2a2d2002f98a3a95f7979867868d73 upstream.
I noticed that reading the snapshot file when it is empty no longer gives a
status. It suppose to show the status of the snapshot buffer as well as how
to allocate and use it. For example:
># cat snapshot
# tracer: nop
#
#
# * Snapshot is allocated *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
But instead it just showed an empty buffer:
># cat snapshot
# tracer: nop
#
# entries-in-buffer/entries-written: 0/0 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
What happened was that it was using the ring_buffer_iter_empty() function to
see if it was empty, and if it was, it showed the status. But that function
was returning false when it was empty. The reason was that the iter header
page was on the reader page, and the reader page was empty, but so was the
buffer itself. The check only tested to see if the iter was on the commit
page, but the commit page was no longer pointing to the reader page, but as
all pages were empty, the buffer is also.
Fixes: 651e22f2701b ("ring-buffer: Always reset iterator to reader page")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/ring_buffer.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -3404,11 +3404,23 @@ EXPORT_SYMBOL_GPL(ring_buffer_iter_reset
int ring_buffer_iter_empty(struct ring_buffer_iter *iter)
{
struct ring_buffer_per_cpu *cpu_buffer;
+ struct buffer_page *reader;
+ struct buffer_page *head_page;
+ struct buffer_page *commit_page;
+ unsigned commit;
cpu_buffer = iter->cpu_buffer;
- return iter->head_page == cpu_buffer->commit_page &&
- iter->head == rb_commit_index(cpu_buffer);
+ /* Remember, trace recording is off when iterator is in use */
+ reader = cpu_buffer->reader_page;
+ head_page = cpu_buffer->head_page;
+ commit_page = cpu_buffer->commit_page;
+ commit = rb_page_commit(commit_page);
+
+ return ((iter->head_page == commit_page && iter->head == commit) ||
+ (iter->head_page == reader && commit_page == head_page &&
+ head_page->read == commit &&
+ iter->head == rb_page_commit(cpu_buffer->reader_page)));
}
EXPORT_SYMBOL_GPL(ring_buffer_iter_empty);
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rabin Vincent <[email protected]>
commit fc280fe871449ead4bdbd1665fa52c7c01c64765 upstream.
Commit 6afcf8ef0ca0 ("mm, compaction: fix NR_ISOLATED_* stats for pfn
based migration") moved the dec_node_page_state() call (along with the
page_is_file_cache() call) to after putback_lru_page().
But page_is_file_cache() can change after putback_lru_page() is called,
so it should be called before putback_lru_page(), as it was before that
patch, to prevent NR_ISOLATE_* stats from going negative.
Without this fix, non-CONFIG_SMP kernels end up hanging in the
while(too_many_isolated()) { congestion_wait() } loop in
shrink_active_list() due to the negative stats.
Mem-Info:
active_anon:32567 inactive_anon:121 isolated_anon:1
active_file:6066 inactive_file:6639 isolated_file:4294967295
^^^^^^^^^^
unevictable:0 dirty:115 writeback:0 unstable:0
slab_reclaimable:2086 slab_unreclaimable:3167
mapped:3398 shmem:18366 pagetables:1145 bounce:0
free:1798 free_pcp:13 free_cma:0
Fixes: 6afcf8ef0ca0 ("mm, compaction: fix NR_ISOLATED_* stats for pfn based migration")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Rabin Vincent <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Ming Ling <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/migrate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -183,9 +183,9 @@ void putback_movable_pages(struct list_h
unlock_page(page);
put_page(page);
} else {
- putback_lru_page(page);
dec_node_page_state(page, NR_ISOLATED_ANON +
page_is_file_cache(page));
+ putback_lru_page(page);
}
}
}
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thorsten Leemhuis <[email protected]>
commit 704de489e0e3640a2ee2d0daf173e9f7375582ba upstream.
Temporary got a Lifebook E547 into my hands and noticed the touchpad
only works after running:
echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled
Add it to the list of machines that need this workaround.
Signed-off-by: Thorsten Leemhuis <[email protected]>
Reviewed-by: Ulrik De Bie <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elantech.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1118,6 +1118,7 @@ static int elantech_get_resolution_v4(st
* Asus UX32VD 0x361f02 00, 15, 0e clickpad
* Avatar AVIU-145A2 0x361f00 ? clickpad
* Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons
+ * Fujitsu LIFEBOOK E547 0x470f00 50, 12, 09 2 hw buttons
* Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons
* Fujitsu T725 0x470f01 05, 12, 09 2 hw buttons
* Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**)
@@ -1524,6 +1525,13 @@ static const struct dmi_system_id elante
},
},
{
+ /* Fujitsu LIFEBOOK E547 does not work with crc_enabled == 0 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E547"),
+ },
+ },
+ {
/* Fujitsu LIFEBOOK E554 does not work with crc_enabled == 0 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Borntraeger <[email protected]>
commit a8f60d1fadf7b8b54449fcc9d6b15248917478ba upstream.
On heavy paging with KSM I see guest data corruption. Turns out that
KSM will add pages to its tree, where the mapping return true for
pte_unused (or might become as such later). KSM will unmap such pages
and reinstantiate with different attributes (e.g. write protected or
special, e.g. in replace_page or write_protect_page)). This uncovered
a bug in our pagetable handling: We must remove the unused flag as
soon as an entry becomes present again.
Signed-of-by: Christian Borntraeger <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/include/asm/pgtable.h | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -1029,6 +1029,8 @@ int get_guest_storage_key(struct mm_stru
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t entry)
{
+ if (pte_present(entry))
+ pte_val(entry) &= ~_PAGE_UNUSED;
if (mm_has_pgste(mm))
ptep_set_pte_at(mm, addr, ptep, entry);
else
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit c9f838d104fed6f2f61d68164712e3204bf5271b upstream.
This fixes CVE-2017-7472.
Running the following program as an unprivileged user exhausts kernel
memory by leaking thread keyrings:
#include <keyutils.h>
int main()
{
for (;;)
keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_THREAD_KEYRING);
}
Fix it by only creating a new thread keyring if there wasn't one before.
To make things more consistent, make install_thread_keyring_to_cred()
and install_process_keyring_to_cred() both return 0 if the corresponding
keyring is already present.
Fixes: d84f4f992cbd ("CRED: Inaugurate COW credentials")
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/keyctl.c | 11 +++-------
security/keys/process_keys.c | 44 ++++++++++++++++++++++++++-----------------
2 files changed, 31 insertions(+), 24 deletions(-)
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -1256,8 +1256,8 @@ error:
* Read or set the default keyring in which request_key() will cache keys and
* return the old setting.
*
- * If a process keyring is specified then this will be created if it doesn't
- * yet exist. The old setting will be returned if successful.
+ * If a thread or process keyring is specified then it will be created if it
+ * doesn't yet exist. The old setting will be returned if successful.
*/
long keyctl_set_reqkey_keyring(int reqkey_defl)
{
@@ -1282,11 +1282,8 @@ long keyctl_set_reqkey_keyring(int reqke
case KEY_REQKEY_DEFL_PROCESS_KEYRING:
ret = install_process_keyring_to_cred(new);
- if (ret < 0) {
- if (ret != -EEXIST)
- goto error;
- ret = 0;
- }
+ if (ret < 0)
+ goto error;
goto set;
case KEY_REQKEY_DEFL_DEFAULT:
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -127,13 +127,18 @@ error:
}
/*
- * Install a fresh thread keyring directly to new credentials. This keyring is
- * allowed to overrun the quota.
+ * Install a thread keyring to the given credentials struct if it didn't have
+ * one already. This is allowed to overrun the quota.
+ *
+ * Return: 0 if a thread keyring is now present; -errno on failure.
*/
int install_thread_keyring_to_cred(struct cred *new)
{
struct key *keyring;
+ if (new->thread_keyring)
+ return 0;
+
keyring = keyring_alloc("_tid", new->uid, new->gid, new,
KEY_POS_ALL | KEY_USR_VIEW,
KEY_ALLOC_QUOTA_OVERRUN,
@@ -146,7 +151,9 @@ int install_thread_keyring_to_cred(struc
}
/*
- * Install a fresh thread keyring, discarding the old one.
+ * Install a thread keyring to the current task if it didn't have one already.
+ *
+ * Return: 0 if a thread keyring is now present; -errno on failure.
*/
static int install_thread_keyring(void)
{
@@ -157,8 +164,6 @@ static int install_thread_keyring(void)
if (!new)
return -ENOMEM;
- BUG_ON(new->thread_keyring);
-
ret = install_thread_keyring_to_cred(new);
if (ret < 0) {
abort_creds(new);
@@ -169,17 +174,17 @@ static int install_thread_keyring(void)
}
/*
- * Install a process keyring directly to a credentials struct.
+ * Install a process keyring to the given credentials struct if it didn't have
+ * one already. This is allowed to overrun the quota.
*
- * Returns -EEXIST if there was already a process keyring, 0 if one installed,
- * and other value on any other error
+ * Return: 0 if a process keyring is now present; -errno on failure.
*/
int install_process_keyring_to_cred(struct cred *new)
{
struct key *keyring;
if (new->process_keyring)
- return -EEXIST;
+ return 0;
keyring = keyring_alloc("_pid", new->uid, new->gid, new,
KEY_POS_ALL | KEY_USR_VIEW,
@@ -193,11 +198,9 @@ int install_process_keyring_to_cred(stru
}
/*
- * Make sure a process keyring is installed for the current process. The
- * existing process keyring is not replaced.
+ * Install a process keyring to the current task if it didn't have one already.
*
- * Returns 0 if there is a process keyring by the end of this function, some
- * error otherwise.
+ * Return: 0 if a process keyring is now present; -errno on failure.
*/
static int install_process_keyring(void)
{
@@ -211,14 +214,18 @@ static int install_process_keyring(void)
ret = install_process_keyring_to_cred(new);
if (ret < 0) {
abort_creds(new);
- return ret != -EEXIST ? ret : 0;
+ return ret;
}
return commit_creds(new);
}
/*
- * Install a session keyring directly to a credentials struct.
+ * Install the given keyring as the session keyring of the given credentials
+ * struct, replacing the existing one if any. If the given keyring is NULL,
+ * then install a new anonymous session keyring.
+ *
+ * Return: 0 on success; -errno on failure.
*/
int install_session_keyring_to_cred(struct cred *cred, struct key *keyring)
{
@@ -253,8 +260,11 @@ int install_session_keyring_to_cred(stru
}
/*
- * Install a session keyring, discarding the old one. If a keyring is not
- * supplied, an empty one is invented.
+ * Install the given keyring as the session keyring of the current task,
+ * replacing the existing one if any. If the given keyring is NULL, then
+ * install a new anonymous session keyring.
+ *
+ * Return: 0 on success; -errno on failure.
*/
static int install_session_keyring(struct key *keyring)
{
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
commit ee8f844e3c5a73b999edf733df1c529d6503ec2f upstream.
This fixes CVE-2016-9604.
Keyrings whose name begin with a '.' are special internal keyrings and so
userspace isn't allowed to create keyrings by this name to prevent
shadowing. However, the patch that added the guard didn't fix
KEYCTL_JOIN_SESSION_KEYRING. Not only can that create dot-named keyrings,
it can also subscribe to them as a session keyring if they grant SEARCH
permission to the user.
This, for example, allows a root process to set .builtin_trusted_keys as
its session keyring, at which point it has full access because now the
possessor permissions are added. This permits root to add extra public
keys, thereby bypassing module verification.
This also affects kexec and IMA.
This can be tested by (as root):
keyctl session .builtin_trusted_keys
keyctl add user a a @s
keyctl list @s
which on my test box gives me:
2 keys in keyring:
180010936: ---lswrv 0 0 asymmetric: Build time autogenerated kernel key: ae3d4a31b82daa8e1a75b49dc2bba949fd992a05
801382539: --alswrv 0 0 user: a
Fix this by rejecting names beginning with a '.' in the keyctl.
Signed-off-by: David Howells <[email protected]>
Acked-by: Mimi Zohar <[email protected]>
cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/keyctl.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -271,7 +271,8 @@ error:
* Create and join an anonymous session keyring or join a named session
* keyring, creating it if necessary. A named session keyring must have Search
* permission for it to be joined. Session keyrings without this permit will
- * be skipped over.
+ * be skipped over. It is not permitted for userspace to create or join
+ * keyrings whose name begin with a dot.
*
* If successful, the ID of the joined session keyring will be returned.
*/
@@ -288,12 +289,16 @@ long keyctl_join_session_keyring(const c
ret = PTR_ERR(name);
goto error;
}
+
+ ret = -EPERM;
+ if (name[0] == '.')
+ goto error_name;
}
/* join the session */
ret = join_session_keyring(name);
+error_name:
kfree(name);
-
error:
return ret;
}
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sachin Prabhu <[email protected]>
commit 62a6cfddcc0a5313e7da3e8311ba16226fe0ac10 upstream.
commit 4fcd1813e640 ("Fix reconnect to not defer smb3 session reconnect
long after socket reconnect") added support for Negotiate requests to
be initiated by echo calls.
To avoid delays in calling echo after a reconnect, I added the patch
introduced by the commit b8c600120fc8 ("Call echo service immediately
after socket reconnect").
This has however caused a regression with cifs shares which do not have
support for echo calls to trigger Negotiate requests. On connections
which need to call Negotiation, the echo calls trigger an error which
triggers a reconnect which in turn triggers another echo call. This
results in a loop which is only broken when an operation is performed on
the cifs share. For an idle share, it can DOS a server.
The patch uses the smb_operation can_echo() for cifs so that it is
called only if connection has been already been setup.
kernel bz: 194531
Signed-off-by: Sachin Prabhu <[email protected]>
Tested-by: Jonathan Liu <[email protected]>
Acked-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb1ops.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -1015,6 +1015,15 @@ cifs_dir_needs_close(struct cifsFileInfo
return !cfile->srch_inf.endOfSearch && !cfile->invalidHandle;
}
+static bool
+cifs_can_echo(struct TCP_Server_Info *server)
+{
+ if (server->tcpStatus == CifsGood)
+ return true;
+
+ return false;
+}
+
struct smb_version_operations smb1_operations = {
.send_cancel = send_nt_cancel,
.compare_fids = cifs_compare_fids,
@@ -1049,6 +1058,7 @@ struct smb_version_operations smb1_opera
.get_dfs_refer = CIFSGetDFSRefer,
.qfs_tcon = cifs_qfs_tcon,
.is_path_accessible = cifs_is_path_accessible,
+ .can_echo = cifs_can_echo,
.query_path_info = cifs_query_path_info,
.query_file_info = cifs_query_file_info,
.get_srv_inum = cifs_get_srv_inum,
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shawn Lin <[email protected]>
commit ce69e2fea093b7fa3991c87849c4955cd47796c9 upstream.
When deploying runtime PM, it's quite verbose to print the
log of ios setting. Also it's useless to print it from system
PM as it should be the same with booting time. We also have
sysfs to get all these information from ios attribute, so let's
skip this print from PM context.
Signed-off-by: Shawn Lin <[email protected]>
Signed-off-by: Jaehoon Chung <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Cc: Alexander Kochetkov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/dw_mmc.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1179,11 +1179,13 @@ static void dw_mci_setup_bus(struct dw_m
if ((clock != slot->__clk_old &&
!test_bit(DW_MMC_CARD_NEEDS_POLL, &slot->flags)) ||
force_clkinit) {
- dev_info(&slot->mmc->class_dev,
- "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
- slot->id, host->bus_hz, clock,
- div ? ((host->bus_hz / div) >> 1) :
- host->bus_hz, div);
+ /* Silent the verbose log if calling from PM context */
+ if (!force_clkinit)
+ dev_info(&slot->mmc->class_dev,
+ "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
+ slot->id, host->bus_hz, clock,
+ div ? ((host->bus_hz / div) >> 1) :
+ host->bus_hz, div);
/*
* If card is polling, display the message only
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Germano Percossi <[email protected]>
commit a0918f1ce6a43ac980b42b300ec443c154970979 upstream.
STATUS_BAD_NETWORK_NAME can be received during node failover,
causing the flag to be set and making the reconnect thread
always unsuccessful, thereafter.
Once the only place where it is set is removed, the remaining
bits are rendered moot.
Removing it does not prevent "mount" from failing when a non
existent share is passed.
What happens when the share really ceases to exist while the
share is mounted is undefined now as much as it was before.
Signed-off-by: Germano Percossi <[email protected]>
Reviewed-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/cifsglob.h | 1 -
fs/cifs/smb2pdu.c | 5 -----
2 files changed, 6 deletions(-)
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -933,7 +933,6 @@ struct cifs_tcon {
bool use_persistent:1; /* use persistent instead of durable handles */
#ifdef CONFIG_CIFS_SMB2
bool print:1; /* set if connection to printer share */
- bool bad_network_name:1; /* set if ret status STATUS_BAD_NETWORK_NAME */
__le32 capabilities;
__u32 share_flags;
__u32 maximal_access;
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -1084,9 +1084,6 @@ SMB2_tcon(const unsigned int xid, struct
else
return -EIO;
- if (tcon && tcon->bad_network_name)
- return -ENOENT;
-
if ((tcon && tcon->seal) &&
((ses->server->capabilities & SMB2_GLOBAL_CAP_ENCRYPTION) == 0)) {
cifs_dbg(VFS, "encryption requested but no server support");
@@ -1188,8 +1185,6 @@ tcon_exit:
tcon_error_exit:
if (rsp->hdr.Status == STATUS_BAD_NETWORK_NAME) {
cifs_dbg(VFS, "BAD_NETWORK_NAME: %s\n", tree);
- if (tcon)
- tcon->bad_network_name = true;
}
goto tcon_exit;
}
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yazen Ghannam <[email protected]>
commit 29f72ce3e4d18066ec75c79c857bee0618a3504b upstream.
MCA bank 3 is reserved on systems pre-Fam17h, so it didn't have a name.
However, MCA bank 3 is defined on Fam17h systems and can be accessed
using legacy MSRs. Without a name we get a stack trace on Fam17h systems
when trying to register sysfs files for bank 3 on kernels that don't
recognize Scalable MCA.
Call MCA bank 3 "decode_unit" since this is what it represents on
Fam17h. This will allow kernels without SMCA support to see this bank on
Fam17h+ and prevent the stack trace. This will not affect older systems
since this bank is reserved on them, i.e. it'll be ignored.
Tested on AMD Fam15h and Fam17h systems.
WARNING: CPU: 26 PID: 1 at lib/kobject.c:210 kobject_add_internal
kobject: (ffff88085bb256c0): attempted to be registered with empty name!
...
Call Trace:
kobject_add_internal
kobject_add
kobject_create_and_add
threshold_create_device
threshold_init_device
Signed-off-by: Yazen Ghannam <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/mcheck/mce_amd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -60,7 +60,7 @@ static const char * const th_names[] = {
"load_store",
"insn_fetch",
"combined_unit",
- "",
+ "decode_unit",
"northbridge",
"execution_unit",
};
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ravi Bangoria <[email protected]>
commit 9e1ba4f27f018742a1aa95d11e35106feba08ec1 upstream.
If we set a kprobe on a 'stdu' instruction on powerpc64, we see a kernel
OOPS:
Bad kernel stack pointer cd93c840 at c000000000009868
Oops: Bad kernel stack pointer, sig: 6 [#1]
...
GPR00: c000001fcd93cb30 00000000cd93c840 c0000000015c5e00 00000000cd93c840
...
NIP [c000000000009868] resume_kernel+0x2c/0x58
LR [c000000000006208] program_check_common+0x108/0x180
On a 64-bit system when the user probes on a 'stdu' instruction, the kernel does
not emulate actual store in emulate_step() because it may corrupt the exception
frame. So the kernel does the actual store operation in exception return code
i.e. resume_kernel().
resume_kernel() loads the saved stack pointer from memory using lwz, which only
loads the low 32-bits of the address, causing the kernel crash.
Fix this by loading the 64-bit value instead.
Fixes: be96f63375a1 ("powerpc: Split out instruction analysis part of emulate_step()")
Signed-off-by: Ravi Bangoria <[email protected]>
Reviewed-by: Naveen N. Rao <[email protected]>
Reviewed-by: Ananth N Mavinakayanahalli <[email protected]>
[mpe: Change log massage, add stable tag]
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/entry_64.S | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -689,7 +689,7 @@ resume_kernel:
addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
- lwz r3,GPR1(r1)
+ ld r3,GPR1(r1)
subi r3,r3,INT_FRAME_SIZE /* dst: Allocate a trampoline exception frame */
mr r4,r1 /* src: current exception frame */
mr r1,r3 /* Reroute the trampoline frame to r1 */
@@ -703,8 +703,8 @@ resume_kernel:
addi r6,r6,8
bdnz 2b
- /* Do real store operation to complete stwu */
- lwz r5,GPR1(r1)
+ /* Do real store operation to complete stdu */
+ ld r5,GPR1(r1)
std r8,0(r5)
/* Clear _TIF_EMULATE_STACK_STORE flag */
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vishal Verma <[email protected]>
commit 0dc9c639e6553e39c13b2c0d54c8a1b098cb95e2 upstream.
The NFIT MCE handler callback (for handling media errors on NVDIMMs)
takes a mutex to add the location of a memory error to a list. But since
the notifier call chain for machine checks (x86_mce_decoder_chain) is
atomic, we get a lockdep splat like:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
in_atomic(): 1, irqs_disabled(): 0, pid: 4, name: kworker/0:0
[..]
Call Trace:
dump_stack
___might_sleep
__might_sleep
mutex_lock_nested
? __lock_acquire
nfit_handle_mce
notifier_call_chain
atomic_notifier_call_chain
? atomic_notifier_call_chain
mce_gen_pool_process
Convert the notifier to a blocking one which gets to run only in process
context.
Boris: remove the notifier call in atomic context in print_mce(). For
now, let's print the MCE on the atomic path so that we can make sure
they go out and get logged at least.
Fixes: 6839a6d96f4e ("nfit: do an ARS scrub on hitting a latent media error")
Reported-by: Ross Zwisler <[email protected]>
Signed-off-by: Vishal Verma <[email protected]>
Acked-by: Tony Luck <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: linux-edac <[email protected]>
Cc: x86-ml <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/mcheck/mce-genpool.c | 2 +-
arch/x86/kernel/cpu/mcheck/mce-internal.h | 2 +-
arch/x86/kernel/cpu/mcheck/mce.c | 17 +++--------------
3 files changed, 5 insertions(+), 16 deletions(-)
--- a/arch/x86/kernel/cpu/mcheck/mce-genpool.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-genpool.c
@@ -85,7 +85,7 @@ void mce_gen_pool_process(void)
head = llist_reverse_order(head);
llist_for_each_entry_safe(node, tmp, head, llnode) {
mce = &node->mce;
- atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, mce);
+ blocking_notifier_call_chain(&x86_mce_decoder_chain, 0, mce);
gen_pool_free(mce_evt_pool, (unsigned long)node, sizeof(*node));
}
}
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -13,7 +13,7 @@ enum severity_level {
MCE_PANIC_SEVERITY,
};
-extern struct atomic_notifier_head x86_mce_decoder_chain;
+extern struct blocking_notifier_head x86_mce_decoder_chain;
#define ATTR_LEN 16
#define INITIAL_CHECK_INTERVAL 5 * 60 /* 5 minutes */
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -123,7 +123,7 @@ static void (*quirk_no_way_out)(int bank
* CPU/chipset specific EDAC code can register a notifier call here to print
* MCE errors in a human-readable form.
*/
-ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain);
+BLOCKING_NOTIFIER_HEAD(x86_mce_decoder_chain);
/* Do initial initialization of a struct mce */
void mce_setup(struct mce *m)
@@ -223,7 +223,7 @@ void mce_register_decode_chain(struct no
if (nb != &mce_srao_nb && nb->priority == INT_MAX)
nb->priority -= 1;
- atomic_notifier_chain_register(&x86_mce_decoder_chain, nb);
+ blocking_notifier_chain_register(&x86_mce_decoder_chain, nb);
}
EXPORT_SYMBOL_GPL(mce_register_decode_chain);
@@ -231,7 +231,7 @@ void mce_unregister_decode_chain(struct
{
atomic_dec(&num_notifiers);
- atomic_notifier_chain_unregister(&x86_mce_decoder_chain, nb);
+ blocking_notifier_chain_unregister(&x86_mce_decoder_chain, nb);
}
EXPORT_SYMBOL_GPL(mce_unregister_decode_chain);
@@ -324,18 +324,7 @@ static void __print_mce(struct mce *m)
static void print_mce(struct mce *m)
{
- int ret = 0;
-
__print_mce(m);
-
- /*
- * Print out human-readable details about the MCE error,
- * (if the CPU has an implementation for that)
- */
- ret = atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
- if (ret == NOTIFY_STOP)
- return;
-
pr_emerg_ratelimited(HW_ERR "Run the above through 'mcelog --ascii'\n");
}
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gerecke <[email protected]>
commit 286f3f478796fb4f9e003e9f7d649f3c33f08d2f upstream.
Because HID_DG_TOOLSERIALNUMBER doesn't first cast the value recieved from HID
to an unsigned type, sign-extension rules can cause the value of
wacom_wac->serial[0] to inadvertently wind up with all 32 of its highest bits
set if the highest bit of "value" was set.
This can cause problems for Tablet PC devices which use AES sensors and the
xf86-input-wacom userspace driver. It is not uncommon for AES sensors to send a
serial number of '0' while the pen is entering or leaving proximity. The
xf86-input-wacom driver ignores events with a serial number of '0' since it
cannot match them up to an in-use tool. To ensure the xf86-input-wacom driver
does not ignore the final out-of-proximity event, the kernel does not send
MSC_SERIAL events when the value of wacom_wac->serial[0] is '0'. If the highest
bit of HID_DG_TOOLSERIALNUMBER is set by an in-prox pen which later leaves
proximity and sends a '0' for HID_DG_TOOLSERIALNUMBER, then only the lowest 32
bits of wacom_wac->serial[0] are actually cleared, causing the kernel to send
an MSC_SERIAL event. Since the 'input_event' function takes an 'int' as
argument, only those lowest (now-cleared) 32 bits of wacom_wac->serial[0] are
sent to userspace, causing xf86-input-wacom to ignore the event. If the event
was the final out-of-prox event, then xf86-input-wacom may remain in a state
where it believes the pen is in proximity and refuses to allow other devices
under its control (e.g. the touchscreen) to move the cursor.
It should be noted that EMR devices and devices which use both the
HID_DG_TOOLSERIALNUMBER and WACOM_HID_WD_SERIALHI usages (in that order) would
be immune to this issue. It appears only AES devices are affected.
Fixes: f85c9dc678a ("HID: wacom: generic: Support tool ID and additional tool types")
Signed-off-by: Jason Gerecke <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/wacom_wac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1798,7 +1798,7 @@ static void wacom_wac_pen_event(struct h
return;
case HID_DG_TOOLSERIALNUMBER:
wacom_wac->serial[0] = (wacom_wac->serial[0] & ~0xFFFFFFFFULL);
- wacom_wac->serial[0] |= value;
+ wacom_wac->serial[0] |= (__u32)value;
return;
case WACOM_HID_WD_SENSE:
wacom_wac->hid_data.sense_state = value;
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
commit 3018e947d7fd536d57e2b550c33e456d921fff8c upstream.
AP/AP_VLAN modes don't accept any real 802.11 multicast data
frames, but since they do need to accept broadcast management
frames the same is currently permitted for data frames. This
opens a security problem because such frames would be decrypted
with the GTK, and could even contain unicast L3 frames.
Since the spec says that ToDS frames must always have the BSSID
as the RA (addr1), reject any other data frames.
The problem was originally reported in "Predicting, Decrypting,
and Abusing WPA2/802.11 Group Keys" at usenix
https://www.usenix.org/conference/usenixsecurity16/technical-sessions/presentation/vanhoef
and brought to my attention by Jouni.
Reported-by: Jouni Malinen <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
--
---
net/mac80211/rx.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -3614,6 +3614,27 @@ static bool ieee80211_accept_frame(struc
!ether_addr_equal(bssid, hdr->addr1))
return false;
}
+
+ /*
+ * 802.11-2016 Table 9-26 says that for data frames, A1 must be
+ * the BSSID - we've checked that already but may have accepted
+ * the wildcard (ff:ff:ff:ff:ff:ff).
+ *
+ * It also says:
+ * The BSSID of the Data frame is determined as follows:
+ * a) If the STA is contained within an AP or is associated
+ * with an AP, the BSSID is the address currently in use
+ * by the STA contained in the AP.
+ *
+ * So we should not accept data frames with an address that's
+ * multicast.
+ *
+ * Accepting it also opens a security problem because stations
+ * could encrypt it with the GTK and inject traffic that way.
+ */
+ if (ieee80211_is_data(hdr->frame_control) && multicast)
+ return false;
+
return true;
case NL80211_IFTYPE_WDS:
if (bssid || !ieee80211_is_data(hdr->frame_control))
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
commit c3d9fda688742c06e89aa1f0f8fd943fc11468cb upstream.
Remove faulty leftover check in do_rename(), apparently introduced in a
merge that combined whiteout support changes with commit f03b8ad8d386
("fs: support RENAME_NOREPLACE for local filesystems")
Fixes: f03b8ad8d386 ("fs: support RENAME_NOREPLACE for local filesystems")
Fixes: 9e0a1fff8db5 ("ubifs: Implement RENAME_WHITEOUT")
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ubifs/dir.c | 3 ---
1 file changed, 3 deletions(-)
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -1316,9 +1316,6 @@ static int do_rename(struct inode *old_d
unsigned int uninitialized_var(saved_nlink);
struct fscrypt_name old_nm, new_nm;
- if (flags & ~RENAME_NOREPLACE)
- return -EINVAL;
-
/*
* Budget request settings: deletion direntry, new direntry, removing
* the old inode, and changing old and new parent directory inodes.
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
commit 9e478066eae41211c92a8f63cc69aafc391bd6ab upstream.
There are two bugs in the follow-MAC code:
* it treats the radiotap header as the 802.11 header
(therefore it can't possibly work)
* it doesn't verify that the skb data it accesses is actually
present in the header, which is mitigated by the first point
Fix this by moving all of this out into a separate function.
This function copies the data it needs using skb_copy_bits()
to make sure it can be accessed if it's paged, and offsets
that by the possibly present vendor radiotap header.
This also makes all those conditions more readable.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/rx.c | 65 +++++++++++++++++++++++++++++++++++++++---------------
1 file changed, 47 insertions(+), 18 deletions(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -208,6 +208,51 @@ ieee80211_rx_radiotap_hdrlen(struct ieee
return len;
}
+static void ieee80211_handle_mu_mimo_mon(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb,
+ int rtap_vendor_space)
+{
+ struct {
+ struct ieee80211_hdr_3addr hdr;
+ u8 category;
+ u8 action_code;
+ } __packed action;
+
+ if (!sdata)
+ return;
+
+ BUILD_BUG_ON(sizeof(action) != IEEE80211_MIN_ACTION_SIZE + 1);
+
+ if (skb->len < rtap_vendor_space + sizeof(action) +
+ VHT_MUMIMO_GROUPS_DATA_LEN)
+ return;
+
+ if (!is_valid_ether_addr(sdata->u.mntr.mu_follow_addr))
+ return;
+
+ skb_copy_bits(skb, rtap_vendor_space, &action, sizeof(action));
+
+ if (!ieee80211_is_action(action.hdr.frame_control))
+ return;
+
+ if (action.category != WLAN_CATEGORY_VHT)
+ return;
+
+ if (action.action_code != WLAN_VHT_ACTION_GROUPID_MGMT)
+ return;
+
+ if (!ether_addr_equal(action.hdr.addr1, sdata->u.mntr.mu_follow_addr))
+ return;
+
+ skb = skb_copy(skb, GFP_ATOMIC);
+ if (!skb)
+ return;
+
+ skb->pkt_type = IEEE80211_SDATA_QUEUE_TYPE_FRAME;
+ skb_queue_tail(&sdata->skb_queue, skb);
+ ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+}
+
/*
* ieee80211_add_rx_radiotap_header - add radiotap header
*
@@ -515,7 +560,6 @@ ieee80211_rx_monitor(struct ieee80211_lo
struct net_device *prev_dev = NULL;
int present_fcs_len = 0;
unsigned int rtap_vendor_space = 0;
- struct ieee80211_mgmt *mgmt;
struct ieee80211_sub_if_data *monitor_sdata =
rcu_dereference(local->monitor_sdata);
@@ -553,6 +597,8 @@ ieee80211_rx_monitor(struct ieee80211_lo
return remove_monitor_info(local, origskb, rtap_vendor_space);
}
+ ieee80211_handle_mu_mimo_mon(monitor_sdata, origskb, rtap_vendor_space);
+
/* room for the radiotap header based on driver features */
rt_hdrlen = ieee80211_rx_radiotap_hdrlen(local, status, origskb);
needed_headroom = rt_hdrlen - rtap_vendor_space;
@@ -618,23 +664,6 @@ ieee80211_rx_monitor(struct ieee80211_lo
ieee80211_rx_stats(sdata->dev, skb->len);
}
- mgmt = (void *)skb->data;
- if (monitor_sdata &&
- skb->len >= IEEE80211_MIN_ACTION_SIZE + 1 + VHT_MUMIMO_GROUPS_DATA_LEN &&
- ieee80211_is_action(mgmt->frame_control) &&
- mgmt->u.action.category == WLAN_CATEGORY_VHT &&
- mgmt->u.action.u.vht_group_notif.action_code == WLAN_VHT_ACTION_GROUPID_MGMT &&
- is_valid_ether_addr(monitor_sdata->u.mntr.mu_follow_addr) &&
- ether_addr_equal(mgmt->da, monitor_sdata->u.mntr.mu_follow_addr)) {
- struct sk_buff *mu_skb = skb_copy(skb, GFP_ATOMIC);
-
- if (mu_skb) {
- mu_skb->pkt_type = IEEE80211_SDATA_QUEUE_TYPE_FRAME;
- skb_queue_tail(&monitor_sdata->skb_queue, mu_skb);
- ieee80211_queue_work(&local->hw, &monitor_sdata->work);
- }
- }
-
if (prev_dev) {
skb->dev = prev_dev;
netif_receive_skb(skb);
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Douglas Anderson <[email protected]>
commit a6db2c86033bc41329770e90c20d4f1fec3824e4 upstream.
According to the SDIO standard interrupts are normally signalled in a
very complicated way. They require the card clock to be running and
require the controller to be paying close attention to the signals
coming from the card. This simply can't happen with the clock stopped
or with the controller in a low power mode.
To that end, we'll disable runtime_pm when we detect that an SDIO card
was inserted. This is much like with what we do with the special
"SDMMC_CLKEN_LOW_PWR" bit that dw_mmc supports.
NOTE: we specifically do this Runtime PM disabling at card init time
rather than in the enable_sdio_irq() callback. This is _different_
than how SDHCI does it. Why do we do it differently?
- Unlike SDHCI, dw_mmc uses the standard sdio_irq code in Linux (AKA
dw_mmc doesn't set MMC_CAP2_SDIO_IRQ_NOTHREAD).
- Because we use the standard sdio_irq code:
- We see a constant stream of enable_sdio_irq(0) and
enable_sdio_irq(1) calls. This is because the standard code
disables interrupts while processing and re-enables them after.
- While interrupts are disabled, there's technically a period where
we could get runtime disabled while processing interrupts.
- If we are runtime disabled while processing interrupts, we'll
reset the controller at resume time (see dw_mci_runtime_resume),
which seems like a terrible idea because we could possibly have
another interrupt pending.
To fix the above isues we'd want to put something in the standard
sdio_irq code that makes sure to call pm_runtime get/put when
interrupts are being actively being processed. That's possible to do,
but it seems like a more complicated mechanism when we really just
want the runtime pm disabled always for SDIO cards given that all the
other bits needed to get Runtime PM vs. SDIO just aren't there.
NOTE: at some point in time someone might come up with a fancy way to
do SDIO interrupts and still allow (some) amount of runtime PM.
Technically we could turn off the card clock if we used an alternate
way of signaling SDIO interrupts (and out of band interrupt is one way
to do this). We probably wouldn't actually want to fully runtime
suspend in this case though--at least not with the current
dw_mci_runtime_resume() which basically fully resets the controller at
resume time.
Fixes: e9ed8835e990 ("mmc: dw_mmc: add runtime PM callback")
Reported-by: Brian Norris <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Acked-by: Jaehoon Chung <[email protected]>
Reviewed-by: Shawn Lin <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/dw_mmc.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -22,6 +22,7 @@
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/stat.h>
@@ -1618,10 +1619,16 @@ static void dw_mci_init_card(struct mmc_
if (card->type == MMC_TYPE_SDIO ||
card->type == MMC_TYPE_SD_COMBO) {
- set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
+ if (!test_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags)) {
+ pm_runtime_get_noresume(mmc->parent);
+ set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
+ }
clk_en_a = clk_en_a_old & ~clken_low_pwr;
} else {
- clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
+ if (test_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags)) {
+ pm_runtime_put_noidle(mmc->parent);
+ clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
+ }
clk_en_a = clk_en_a_old | clken_low_pwr;
}
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
commit c1644fe041ebaf6519f6809146a77c3ead9193af upstream.
This fixes CVE-2017-6951.
Userspace should not be able to do things with the "dead" key type as it
doesn't have some of the helper functions set upon it that the kernel
needs. Attempting to use it may cause the kernel to crash.
Fix this by changing the name of the type to ".dead" so that it's rejected
up front on userspace syscalls by key_get_type_from_user().
Though this doesn't seem to affect recent kernels, it does affect older
ones, certainly those prior to:
commit c06cfb08b88dfbe13be44a69ae2fdc3a7c902d81
Author: David Howells <[email protected]>
Date: Tue Sep 16 17:36:06 2014 +0100
KEYS: Remove key_type::match in favour of overriding default by match_preparse
which went in before 3.18-rc1.
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/keys/gc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/security/keys/gc.c
+++ b/security/keys/gc.c
@@ -46,7 +46,7 @@ static unsigned long key_gc_flags;
* immediately unlinked.
*/
struct key_type key_type_dead = {
- .name = "dead",
+ .name = ".dead",
};
/*
4.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steven Rostedt (VMware) <[email protected]>
commit df62db5be2e5f070ecd1a5ece5945b590ee112e0 upstream.
Currently the snapshot trigger enables the probe and then allocates the
snapshot. If the probe triggers before the allocation, it could cause the
snapshot to fail and turn tracing off. It's best to allocate the snapshot
buffer first, and then enable the trigger. If something goes wrong in the
enabling of the trigger, the snapshot buffer is still allocated, but it can
also be freed by the user by writting zero into the snapshot buffer file.
Also add a check of the return status of alloc_snapshot().
Fixes: 77fd5c15e3 ("tracing: Add snapshot trigger to function probes")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -6740,11 +6740,13 @@ ftrace_trace_snapshot_callback(struct ft
return ret;
out_reg:
- ret = register_ftrace_function_probe(glob, ops, count);
+ ret = alloc_snapshot(&global_trace);
+ if (ret < 0)
+ goto out;
- if (ret >= 0)
- alloc_snapshot(&global_trace);
+ ret = register_ftrace_function_probe(glob, ops, count);
+ out:
return ret < 0 ? ret : 0;
}
On 04/25/2017 09:09 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.10.13 release.
> There are 24 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Apr 27 15:08:24 UTC 2017.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.10.13-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On 04/25/2017 08:09 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.10.13 release.
> There are 24 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Apr 27 15:08:24 UTC 2017.
> Anything received after that time might be too late.
>
Build results:
total: 149 pass: 149 fail: 0
Qemu test results:
total: 122 pass: 122 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter