An experimental test with the command below gives these errors:
arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: adc@1038c000:
'clock-frequency'
does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rv1108-evb.dt.yaml: adc@1038c000:
'clock-frequency'
does not match any of the regexes: 'pinctrl-[0-9]+'
'clock-frequency' is not a valid property for a saradc node,
so remove it.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/iio/adc/
rockchip-saradc.yaml
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm/boot/dts/rv1108.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 153868c62..f9cfe2c80 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -366,7 +366,6 @@
reg = <0x1038c000 0x100>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#io-channel-cells = <1>;
- clock-frequency = <1000000>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
status = "disabled";
--
2.11.0
Am Freitag, 13. M?rz 2020, 14:26:46 CET schrieb Johan Jonker:
> An experimental test with the command below gives these errors:
>
> arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: adc@1038c000:
> 'clock-frequency'
> does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rv1108-evb.dt.yaml: adc@1038c000:
> 'clock-frequency'
> does not match any of the regexes: 'pinctrl-[0-9]+'
>
> 'clock-frequency' is not a valid property for a saradc node,
> so remove it.
>
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/iio/adc/
> rockchip-saradc.yaml
>
> Signed-off-by: Johan Jonker <[email protected]>
applied for 5.7
Thanks
Heiko