Add Synopsys DesignWare xData IP driver to Makefile and Kconfig.
This driver enables/disables the PCIe traffic generator module
pertain to the Synopsys DesignWare prototype.
Signed-off-by: Gustavo Pimentel <[email protected]>
---
drivers/misc/Kconfig | 10 ++++++++++
drivers/misc/Makefile | 1 +
2 files changed, 11 insertions(+)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index fafa8b0..e42b171 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -423,6 +423,16 @@ config SRAM
config SRAM_EXEC
bool
+config DW_XDATA_PCIE
+ depends on PCI
+ tristate "Synopsys DesignWare xData PCIe driver"
+ help
+ This driver allows controlling Synopsys DesignWare PCIe traffic
+ generator IP also known as xData, present in Synopsys DesignWare
+ PCIe Endpoint prototype.
+
+ If unsure, say N.
+
config PCI_ENDPOINT_TEST
depends on PCI
select CRC32
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d23231e..bf22021 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_SRAM_EXEC) += sram-exec.o
obj-$(CONFIG_GENWQE) += genwqe/
obj-$(CONFIG_ECHO) += echo/
obj-$(CONFIG_CXL_BASE) += cxl/
+obj-$(CONFIG_DW_XDATA_PCIE) += dw-xdata-pcie.o
obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
obj-$(CONFIG_OCXL) += ocxl/
obj-y += cardreader/
--
2.7.4
On Sat, Mar 27, 2021 at 04:06:52AM +0100, Gustavo Pimentel wrote:
> Add Synopsys DesignWare xData IP driver to Makefile and Kconfig.
>
> This driver enables/disables the PCIe traffic generator module
> pertain to the Synopsys DesignWare prototype.
>
> Signed-off-by: Gustavo Pimentel <[email protected]>
> ---
> drivers/misc/Kconfig | 10 ++++++++++
> drivers/misc/Makefile | 1 +
> 2 files changed, 11 insertions(+)
This should be part of the patch that adds the driver so that you can
properly bisect things to when problems really happen.
thnaks,
greg k-h