Card 1 'KTC2000:Kingston EtheRx KNE20 Plug and Play ISA Adapter' PnP version 1.0 Product version 1.0
Logical device 0 'RTL8019:Unknown'
Supported registers 0x2
Compatible device PNP80d6
Device is active
Active port 0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff
Active IRQ 255 [0xff],255 [0xff]
Active DMA 255,255
Active memory 0xffffffff,0xffffffff,0xffffffff,0xffffffff
Resources 0
Priority preferred
Port 0x240-0x380, align 0x1f, size 0x20, 10-bit address decoding
IRQ 3,4,5,2/9,10,11,12,15 High-Edge
On Tue, 12 Dec 2000 18:46:42 +0100, Juan blurted forth:
> Hi!
>
> This error exists since 2.4.0-test10preX or so. It occurs when the
> network interface is activated.
>
> I'm using RedHat 7.0 and my ethernet card is a "Kingston EtheRx KNE20
> Plug and Play ISA Adapter". I'm unable to access the Internet because
> the ethernet card doesn't work :-(. Besides, the card uses two
> interrupts (?) and there are two interfaces (eth0 y eth1) when I have
> only one (?).
>
[snip]
> --- Next Part ---
>
> Card 1 'KTC2000:Kingston EtheRx KNE20 Plug and Play ISA Adapter' PnP version 1.0 Product version 1.0
> Logical device 0 'RTL8019:Unknown'
> Supported registers 0x2
> Compatible device PNP80d6
> Device is active
> Active port 0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff
> Active IRQ 255 [0xff],255 [0xff]
> Active DMA 255,255
> Active memory 0xffffffff,0xffffffff,0xffffffff,0xffffffff
> Resources 0
> Priority preferred
> Port 0x240-0x380, align 0x1f, size 0x20, 10-bit address decoding
> IRQ 3,4,5,2/9,10,11,12,15 High-Edge
try loading the rtl81*.o module(s) until it works right... you should
see a message for eth1 in dmesg about it
--
.oO gnea at rochester dot rr dot com Oo.
.oO url: http://garson.org/~gnea Oo.
"You can tune a filesystem, but you can't tuna fish" -unknown