[1.] philips CDD 3610 cd-writer freezes system with any 2.4 kernel
[.2] with any 2.4 kernel, writing a cd results in a system freeze. fast
blanking works, but writing locks up everything. With 2.2.x kernels,
everything works fine. I have a dual celeron system (the *ss-sucking Abit BP6
mainboard :( )
Both the harddisk (maxtor) and the cdwriter are attached to the DMA33
controller because the HPT controller on the mainboard is crap.
Following error messages were in /var/log/messages:
Nov 25 21:35:45 progeny kernel: hda: timeout waiting for DMA
Nov 25 21:35:45 progeny kernel: ide_dmaproc: chipset supported
ide_dma_timeout func only: 14
Nov 25 21:35:45 progeny kernel: hda: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Nov 25 21:35:45 progeny kernel: hda: drive not ready for command
Nov 25 21:36:05 progeny kernel: scsi : aborting command due to timeout : pid
246, scsi0, channel 0, id 1, lun 0 Write (10) 00 00 00 00 ba 00 00 1f 00
Nov 25 21:36:05 progeny kernel: hdd: timeout waiting for DMA
Nov 25 21:36:05 progeny kernel: ide_dmaproc: chipset supported
ide_dma_timeout func only: 14
[3.] scsi emulation , sg ?
[4.] 2.4.16-pre1 (and any other 2.4 kernel I've tried)
[7.] debian/unstable
[7.1]
Gnu C 2.95.4
Gnu make 3.79.1
util-linux 2.11m
mount 2.11m
modutils 2.4.11
e2fsprogs 1.25
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.11
Modules Loaded agpgart NVdriver sg ide-scsi scsi_mod snd-pcm-oss
snd-pcm-plugin snd-mixer-oss snd-card-sbawe isapnp snd-sb16-csp snd-sb16-dsp
snd-pcm snd-mixer snd-opl3 snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi
snd-seq-device snd soundcore parport_pc lp parport ne2k-pci 8390
[7.2]
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 367.506
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
pat pse36 mmx fxsr
bogomips : 732.36
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 367.506
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
pat pse36 mmx fxsr
bogomips : 734.00
[7.3]
soundcore 3396 0 (autoclean)
NVdriver 713536 17 (autoclean)
sg 23364 0 (unused)
ide-scsi 7488 0
scsi_mod 80184 2 [sg ide-scsi]
parport_pc 15656 1 (autoclean)
lp 5664 0 (autoclean)
parport 24768 1 (autoclean) [parport_pc lp]
ne2k-pci 4768 2 (autoclean)
8390 6208 0 (autoclean) [ne2k-pci]
[7.4]
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
4000-403f : Intel Corp. 82371AB PIIX4 ACPI
5000-501f : Intel Corp. 82371AB PIIX4 ACPI
c000-c01f : Intel Corp. 82371AB PIIX4 USB
c400-c41f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
c400-c41f : ne2k-pci
c800-c81f : Realtek Semiconductor Co., Ltd. RTL-8029(AS) (#2)
c800-c81f : ne2k-pci
cc00-cc07 : Triones Technologies, Inc. HPT366 / HPT370
d000-d003 : Triones Technologies, Inc. HPT366 / HPT370
d400-d4ff : Triones Technologies, Inc. HPT366 / HPT370
d400-d407 : ide2
d410-d4ff : HPT366
d800-d807 : Triones Technologies, Inc. HPT366 / HPT370 (#2)
dc00-dc03 : Triones Technologies, Inc. HPT366 / HPT370 (#2)
e000-e0ff : Triones Technologies, Inc. HPT366 / HPT370 (#2)
e000-e007 : ide3
e010-e0ff : HPT366
f000-f00f : Intel Corp. 82371AB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
00000000-0009efff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0bffffff : System RAM
00100000-001dddc1 : Kernel code
001dddc2-0021831f : Kernel data
d0000000-d3ffffff : Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge
d4000000-d5ffffff : PCI Bus #01
d4000000-d4ffffff : nVidia Corporation Riva TnT2 [NV5]
d6000000-d7ffffff : PCI Bus #01
d6000000-d7ffffff : nVidia Corporation Riva TnT2 [NV5]
[7.5]
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x2
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: d6000000-d7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80
[Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00
[UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at c000 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: D-Link System Inc DE-528
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c400 [size=32]
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: D-Link System Inc DE-528
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c800 [size=32]
00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 /
HPT370 (rev 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 4: I/O ports at d400 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
00:13.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366 /
HPT370 (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 120 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at dc00 [size=4]
Region 4: I/O ports at e000 [size=256]
01:00.0 VGA compatible controller: nVidia Corporation Riva TnT2 [NV5] (rev
11) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc. AGP-V3800 SGRAM
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x2
[7.6]
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: E-IDE Model: CD-ROM 48X/AKU Rev: U22
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: PHILIPS Model: CDD3610 CD-R/RW Rev: 3.01
Type: CD-ROM
Marko van Dooren wrote:
> [1.] philips CDD 3610 cd-writer freezes system with any 2.4 kernel
> [.2] with any 2.4 kernel, writing a cd results in a system freeze. fast
> blanking works, but writing locks up everything. With 2.2.x kernels,
> everything works fine. I have a dual celeron system (the *ss-sucking Abit BP6
> mainboard :( )
> <snip/>
Marko,
Some of us were just discussing a Yamaha cdwriter lockup
on the cdwrite list. In that case stopping magicdev
(on GNOME) or kscd (on KDE) cured the problem.
If the maintainers of those programs are reading this,
then some cdwriters take a dim view (i.e. lock up)
if they are sent a TEST UNIT READY (or some such) SCSI
command by one of these polling programs _while_ cdrecord
is trying to do its thing. Please read the "access_count"
[via sg] and leave the device alone if some other program
(e.g. cdrecord) has the device open.
Perhaps the SCSI subsystem's access_count could be made
visible via the cdrom driver's interface.
Doug Gilbert