Hi,
this is a new driver for handling a TI-GRAPH LINK USB (aka SilverLink)
cable
designed to connect a Texas Instruments graphing calculators to a
computer/workstation through USB.
This driver has an official device number.
==============================[ tiglusb.c ]==========================
/* Hey EMACS -*- linux-c -*-
*
* tiglusb -- Texas Instruments' USB GraphLink (aka SilverLink) driver.
* Target: Texas Instruments graphing calculators
(http://lpg.ticalc.org).
*
* Copyright (C) 2001-2002:
* Romain Lievin <[email protected]>
* Julien BLACHE <[email protected]>
* under the terms of the GNU General Public License.
*
* Based on dabusb.c, printer.c & scanner.c
*
* Please see the file: linux/Documentation/usb/SilverLink.txt
* and the website at: http://lpg.ticalc.org/prj_usb/
* for more info.
*
*/
#include <linux/module.h>
#include <linux/socket.h>
#include <linux/miscdevice.h>
#include <linux/list.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <linux/delay.h>
#include <linux/usb.h>
#include <linux/smp_lock.h>
#include <linux/devfs_fs_kernel.h>
#include "ticable.h"
#include "tiglusb.h"
/*
* Version Information
*/
#define DRIVER_VERSION "1.01"
#define DRIVER_AUTHOR "Romain Lievin <[email protected]> & Julien
Blache <[email protected]>"
#define DRIVER_DESC "TI-GRAPH LINK USB (aka SilverLink) driver"
#define DRIVER_LICENSE "GPL"
/* ----- global variables ---------------------------------------------
*/
static tiglusb_t tiglusb[MAXTIGL];
static int timeout = TIMAXTIME; /* timeout in tenth of seconds
*/
static devfs_handle_t devfs_handle;
/*---------- misc functions
-----------------------------------------------*/
/* Unregister device */
static void usblp_cleanup (tiglusb_t *s)
{
devfs_unregister (s->devfs);
//memset(tiglusb[s->minor], 0, sizeof(tiglusb_t));
info ("tiglusb%d removed", s->minor);
}
/* Re-initialize device */
static int clear_device(struct usb_device *dev)
{
if (usb_set_configuration (dev,
dev->config[0].bConfigurationValue) < 0)
{
printk("tiglusb: clear_device failed\n");
return -1;
}
return 0;
}
/* Clear input & output pipes (endpoints) */
static int clear_pipes(struct usb_device *dev)
{
unsigned int pipe;
pipe = usb_sndbulkpipe (dev, 1);
if(usb_clear_halt(dev, usb_pipeendpoint(pipe))) {
printk("tiglusb: clear_pipe (r), request failed\n");
return -1;
}
pipe = usb_sndbulkpipe (dev, 2);
if(usb_clear_halt(dev, usb_pipeendpoint(pipe))) {
printk("tiglusb: clear_pipe (w), request failed\n");
return -1;
}
return 0;
}
/* ----- kernel module functions---------------------------------------
*/
// ok
static int tiglusb_open(struct inode *inode, struct file *file)
{
int devnum = MINOR(inode->i_rdev);
ptiglusb_t s;
if (devnum < TIUSB_MINOR || devnum >= (TIUSB_MINOR + MAXTIGL))
return -EIO;
s = &tiglusb[devnum - TIUSB_MINOR];
down(&s->mutex);
while (!s->dev || s->opened) {
up (&s->mutex);
if (file->f_flags & O_NONBLOCK) {
return -EBUSY;
}
schedule_timeout (HZ / 2);
if (signal_pending (current)) {
return -EAGAIN;
}
down (&s->mutex);
}
s->opened = 1;
up(&s->mutex);
file->f_pos = 0;
file->private_data = s;
return 0;
}
//ok
static int tiglusb_release(struct inode *inode, struct file *file)
{
ptiglusb_t s = (ptiglusb_t) file->private_data;
lock_kernel();
down (&s->mutex);
s->state = _stopped;
up (&s->mutex);
if (!s->remove_pending)
clear_device(s->dev);
else
wake_up (&s->remove_ok);
s->opened = 0;
unlock_kernel();
return 0;
}
//
static ssize_t tiglusb_read(struct file *file, char *buf,
size_t count, loff_t * ppos)
{
ptiglusb_t s = (ptiglusb_t) file->private_data;
ssize_t ret = 0;
int bytes_to_read = 0;
int bytes_read = 0;
int result = 0;
char buffer[BULK_RCV_MAX];
unsigned int pipe;
if (*ppos)
return -ESPIPE;
if (s->remove_pending)
return -EIO;
if (!s->dev)
return -EIO;
bytes_to_read = (count >= BULK_RCV_MAX) ? BULK_RCV_MAX : count;
pipe = usb_rcvbulkpipe (s->dev, 1);
result = usb_bulk_msg(s->dev, pipe, buffer, bytes_to_read,
&bytes_read, HZ/(timeout/10));
//printk("hello: %i %i %i %i\n",
// ETIMEDOUT, USB_ST_TIMEOUT, EPIPE, USB_ST_STALL);
if (result == USB_ST_TIMEOUT) { /* NAK */
ret = -ETIMEDOUT;
if(!bytes_read) {
printk("quirk !\n");
}
warn("tiglusb_read, NAK received.");
goto out;
}
else if (result == USB_ST_STALL) { /* STALL -- shouldn't happen
*/
warn("CLEAR_FEATURE request to remove STALL
condition.\n");
if(usb_clear_halt(s->dev, usb_pipeendpoint(pipe)))
warn("send_packet, request failed\n");
//clear_device(s->dev);
ret = -EPIPE;
goto out;
}
else if (result < 0) { /* We should not get any I/O errors */
warn("funky result: %d. Please notify maintainer.",
result);
ret = -EIO;
goto out;
}
if (copy_to_user(buf, buffer, bytes_read)) {
ret = -EFAULT;
goto out;
}
out:
return ret ? ret : bytes_read;
}
//
static ssize_t tiglusb_write(struct file *file, const char *buf,
size_t count, loff_t * ppos)
{
ptiglusb_t s = (ptiglusb_t) file->private_data;
ssize_t ret = 0;
int bytes_to_write = 0;
int bytes_written = 0;
int result = 0;
char buffer[BULK_SND_MAX];
unsigned int pipe;
if (*ppos)
return -ESPIPE;
if (s->remove_pending)
return -EIO;
if (!s->dev)
return -EIO;
bytes_to_write = (count >= BULK_SND_MAX) ? BULK_SND_MAX : count;
if (copy_from_user(buffer, buf, bytes_to_write)) {
ret = -EFAULT;
goto out;
}
pipe = usb_sndbulkpipe (s->dev, 2);
result = usb_bulk_msg(s->dev, pipe, buffer, bytes_to_write,
&bytes_written, HZ/(timeout/10));
if (result == USB_ST_TIMEOUT) { /* NAK */
warn("tiglusb_write, NAK received.");
ret = -ETIMEDOUT;
goto out;
}
else if (result == USB_ST_STALL) { /* STALL -- shouldn't happen
*/
warn("CLEAR_FEATURE request to remove STALL
condition.\n");
if(usb_clear_halt(s->dev, usb_pipeendpoint(pipe)))
warn("send_packet, request failed\n");
//clear_device(s->dev);
ret = -EPIPE;
goto out;
}
else if (result < 0) { /* We should not get any I/O errors */
warn("funky result: %d. Please notify maintainer.",
result);
ret = -EIO;
goto out;
}
if (bytes_written != bytes_to_write) {
ret = -EIO;
goto out;
}
out:
return ret ? ret : bytes_written;
}
//ok
static int tiglusb_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
ptiglusb_t s = (ptiglusb_t) file->private_data;
int ret = 0;
if (s->remove_pending)
return -EIO;
down (&s->mutex);
if (!s->dev) {
up (&s->mutex);
return -EIO;
}
switch (cmd)
{
case IOCTL_TIUSB_TIMEOUT:
timeout = arg ; // timeout value is passed in tenth of
seconds
break;
case IOCTL_TIUSB_RESET_DEVICE:
printk(KERN_DEBUG "IOCTL_TIGLUSB_RESET_DEVICE\n");
if(clear_device(s->dev))
ret = -EIO;
break;
case IOCTL_TIUSB_RESET_PIPES:
printk(KERN_DEBUG "IOCTL_TIGLUSB_RESET_PIPES\n");
if(clear_pipes(s->dev))
ret = -EIO;
break;
default:
ret = -ENOTTY;
break;
}
up (&s->mutex);
return ret;
}
/* ----- kernel module registering ------------------------------------
*/
static struct file_operations tiglusb_fops =
{
owner: THIS_MODULE,
llseek: no_llseek,
read: tiglusb_read,
write: tiglusb_write,
ioctl: tiglusb_ioctl,
open: tiglusb_open,
release: tiglusb_release,
};
//ok
static int tiglusb_find_struct (void)
{
int u;
for (u=0; u<MAXTIGL; u++)
{
ptiglusb_t s = &tiglusb[u];
if (!s->dev)
return u;
}
return -1;
}
/* --- initialisation code ------------------------------------- */
//ok
static void *tiglusb_probe (struct usb_device *dev, unsigned int ifnum,
const struct usb_device_id *id)
{
int minor;
ptiglusb_t s;
char name[8];
printk("tiglusb: probing vendor id 0x%x, device id 0x%x
ifnum:%d\n",
dev->descriptor.idVendor, dev->descriptor.idProduct,
ifnum);
/*
* We don't handle multiple configurations. As of version 0x0103
of
* the TIGL hardware, there's only 1 configuration.
*/
if (dev->descriptor.bNumConfigurations != 1)
return NULL;
if ((dev->descriptor.idProduct != 0xe001) &&
(dev->descriptor.idVendor != 0x451))
return NULL;
if (usb_set_configuration (dev,
dev->config[0].bConfigurationValue) < 0) {
printk("tiglusb_probe: set_configuration failed\n");
return NULL;
}
minor = tiglusb_find_struct ();
if (minor == -1)
return NULL;
s = &tiglusb[minor];
down (&s->mutex);
s->remove_pending = 0;
s->dev = dev;
up (&s->mutex);
dbg("bound to interface: %d", ifnum);
sprintf(name, "%d", s->minor);
printk("tiglusb: registering to devfs : major = %d, minor = %d,
node = %s\n", TIUSB_MAJOR, (TIUSB_MINOR + s->minor), name);
s->devfs = devfs_register(devfs_handle, name,
DEVFS_FL_DEFAULT, TIUSB_MAJOR,
TIUSB_MINOR + s->minor,
S_IFCHR | S_IRUGO | S_IWUGO,
&tiglusb_fops, NULL);
/* Display firmware version */
printk("tiglusb: link cable version %i.%02x\n",
dev->descriptor.bcdDevice >> 8,
dev->descriptor.bcdDevice & 0xff);
return s;
}
//ok
static void tiglusb_disconnect (struct usb_device *dev, void
*drv_context)
{
ptiglusb_t s = (ptiglusb_t) drv_context;
if (!s || !s->dev)
printk("bogus disconnect");
s->remove_pending = 1;
wake_up (&s->wait);
if (s->state == _started)
sleep_on (&s->remove_ok);
s->dev = NULL;
s->opened = 0;
/* cleanup now or later, on close*/
if (!s->opened)
usblp_cleanup (s);
else
up (&s->mutex);
/* unregister device */
devfs_unregister(s->devfs); s->devfs = NULL;
printk("tiglusb: device disconnected\n");
}
static struct usb_device_id tiglusb_ids [] = {
{ USB_DEVICE(0x0451, 0xe001) },
{ }
};
MODULE_DEVICE_TABLE (usb, tiglusb_ids);
static struct usb_driver tiglusb_driver =
{
name: "tiglusb",
probe: tiglusb_probe,
disconnect: tiglusb_disconnect,
fops: &tiglusb_fops,
minor: TIUSB_MINOR,
id_table: tiglusb_ids,
};
/* --- initialisation code ------------------------------------- */
#ifndef MODULE
/* You must set these - there is no sane way to probe for this
cable.
* You can use 'tipar=timeout,delay' to set these now. */
static int __init tiglusb_setup (char *str)
{
int ints[2];
str = get_options (str, ARRAY_SIZE(ints), ints);
if (ints[0] > 0) {
timeout = ints[1];
}
return 1;
}
#endif
static int __init tiglusb_init (void)
{
unsigned u;
int result;
/* initialize struct */
for (u = 0; u < MAXTIGL; u++)
{
ptiglusb_t s = &tiglusb[u];
memset (s, 0, sizeof (tiglusb_t));
init_MUTEX (&s->mutex);
s->dev = NULL;
s->minor = u;
s->opened = 0;
init_waitqueue_head (&s->wait);
init_waitqueue_head (&s->remove_ok);
}
/* register device */
if (devfs_register_chrdev (TIUSB_MAJOR, "tiglusb",
&tiglusb_fops)) {
printk("tiglusb: unable to get major %d\n", TIUSB_MAJOR);
return -EIO;
}
/* Use devfs, tree: /dev/ticables/usb/[0..3]*/
devfs_handle = devfs_mk_dir(NULL, "ticables/usb", NULL);
/* register USB module */
result = usb_register(&tiglusb_driver);
if (result < 0) {
devfs_unregister_chrdev(TIUSB_MAJOR, "tiglusb");
return -1;
}
info(DRIVER_DESC ", " DRIVER_VERSION);
return 0;
}
static void __exit tiglusb_cleanup (void)
{
usb_deregister (&tiglusb_driver);
devfs_unregister (devfs_handle);
devfs_unregister_chrdev(TIUSB_MAJOR, "tiglusb");
}
/* ---------------------------------------------------------------------
*/
__setup("tipar=", tiglusb_setup);
module_init(tiglusb_init);
module_exit(tiglusb_cleanup);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);
EXPORT_NO_SYMBOLS;
MODULE_PARM(timeout, "i");
MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)");
/* ---------------------------------------------------------------------
*/
==============================[ tiglusb.h ]========================
/* Hey EMACS -*- linux-c -*-
*
* tiglusb - low level driver for SilverLink cable
*
* Copyright (C) 2000-2002, Romain Lievin <[email protected]>
* under the terms of the GNU General Public License.
*
* Redistribution of this file is permitted under the terms of the GNU
* Public License (GPL)
*/
#ifndef _TIGLUSB_H
#define _TIGLUSB_H
/*
* Max. number of devices supported
*/
#define MAXTIGL 16
/*
* Max. packetsize for IN and OUT pipes
*/
#define BULK_RCV_MAX 32
#define BULK_SND_MAX 32
/*
* The driver context...
*/
typedef enum { _stopped=0, _started } driver_state_t;
typedef struct
{
struct usb_device *dev; /* USB device handle */
struct semaphore mutex; /* locks this struct */
struct semaphore sem;
wait_queue_head_t wait; /* for timed waits */
wait_queue_head_t remove_ok;
int minor; /* which minor dev #? */
devfs_handle_t devfs; /* devfs device */
driver_state_t state; /* started/stopped */
int opened; /* tru if open */
int remove_pending;
struct urb readurb, writeurb; /* The urbs */
int wcomplete, rcomplete; /* R/W is complete */
char rd_buf[BULK_RCV_MAX]; /* read buffer */
char wr_buf[BULK_SND_MAX]; /* write buffer */
} tiglusb_t, *ptiglusb_t;
extern devfs_handle_t usb_devfs_handle; /* /dev/usb dir.
*/
#endif
==============================[ ticable.h ]==========================
/* Hey EMACS -*- linux-c -*-
*
* tipar/tiser/tiusb - low level driver for handling link cables
* designed for Texas Instruments graphing calculators.
*
* Copyright (C) 2000-2002, Romain Lievin <[email protected]>
*
* Redistribution of this file is permitted under the terms of the GNU
* Public License (GPL)
*/
#ifndef _TICABLE_H
#define _TICABLE_H 1
/* Internal default constants for the kernel module */
#define TIMAXTIME 15 /* 1.5 seconds */
#define IO_DELAY 10 /* 10 micro-seconds */
/* Major & minor number for character devices */
#define TIPAR_MAJOR 115 /* 0 to 7 */
#define TIPAR_MINOR 0
#define TISER_MAJOR 115 /* 8 to 15 */
#define TISER_MINOR 8
#define TIUSB_MAJOR 115 /* 16 to 31 */
#define TIUSB_MINOR 16
/*
* Request values for the 'ioctl' function.
*/
#define IOCTL_TIPAR_DELAY _IOW('p', 0xa8, int) /* set delay */
#define IOCTL_TIPAR_TIMEOUT _IOW('p', 0xa9, int) /* set timeout */
#define IOCTL_TISER_DELAY _IOW('p', 0xa0, int) /* set delay */
#define IOCTL_TISER_TIMEOUT _IOW('p', 0xa1, int) /* set timeout */
#define IOCTL_TIUSB_TIMEOUT _IOW('N', 0x20, int) /* set timeout
*/
#define IOCTL_TIUSB_RESET_DEVICE _IOW('N', 0x21, int) /* reset device
*/
#define IOCTL_TIUSB_RESET_PIPES _IOW('N', 0x22, int) /* reset both
pipes*/
#endif /* TICABLE_H */
---
Romain LIEVIN aka Roms, mail: [email protected]
web: http://lpg.ticalc.org/prj_tilp (on http://www.ticalc.org)
ICQ: 43585029 (GtkIcq0.60/Linux)
On Sun, Mar 31, 2002 at 12:39:21PM +0200, Romain Li?vin wrote:
> Hi,
>
> this is a new driver for handling a TI-GRAPH LINK USB (aka SilverLink)
> cable
> designed to connect a Texas Instruments graphing calculators to a
> computer/workstation through USB.
>
> This driver has an official device number.
Do you want to add this driver to the drivers/usb/ directory with the
rest of the kernel USB drivers? If so, please send me a patch.
thanks,
greg k-h
Hi,
> > this is a new driver for handling a TI-GRAPH LINK USB (aka SilverLink)
> > cable
> > designed to connect a Texas Instruments graphing calculators to a
> > computer/workstation through USB.
> >
> > This driver has an official device number.
>
> Do you want to add this driver to the drivers/usb/ directory with the
> rest of the kernel USB drivers? If so, please send me a patch.
Yes, I would like to add it. You will find the complete patch below.
BTW, I recently requested device numbers to John Cagle for 3 TI related
modules. The USB module shares its major with the others.
> 115 char TI link cable devices (115 was formerly the console driver speaker)
> 0 = /dev/tipar0 Parallel cable on first parallel port
> ...
> 7 = /dev/tipar7 Parallel cable on seventh parallel port
>
> 8 = /dev/tiser0 Serial cable on first serial port
> ...
> 15 = /dev/tiser7 Serial cable on seventh serial port
>
> 16 = /dev/tiusb0 First USB cable
> ...
> 47 = /dev/tiusb31 32nd USB cable
I do not know whether it's the best thing to do. The 2 others use the
same bit-banging scheme and could be grouped under a sub-system (such as
I2C). The USB module is different. Maybe it's better to register it
under the USB sub-system...
Thanks, Romain.
==============================[ cut here ]==============================
--- linux.orig/drivers/usb/tiglusb.c Sun Mar 31 22:02:56 2002
+++ linux/drivers/usb/tiglusb.c Sun Mar 31 22:05:05 2002
@@ -0,0 +1,524 @@
+/* Hey EMACS -*- linux-c -*-
+ *
+ * tiglusb -- Texas Instruments' USB GraphLink (aka SilverLink) driver.
+ * Target: Texas Instruments graphing calculators
(http://lpg.ticalc.org).
+ *
+ * Copyright (C) 2001-2002:
+ * Romain Lievin <[email protected]>
+ * Julien BLACHE <[email protected]>
+ * under the terms of the GNU General Public License.
+ *
+ * Based on dabusb.c, printer.c & scanner.c
+ *
+ * Please see the file: linux/Documentation/usb/SilverLink.txt
+ * and the website at: http://lpg.ticalc.org/prj_usb/
+ * for more info.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/socket.h>
+#include <linux/miscdevice.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/atomic.h>
+#include <linux/delay.h>
+#include <linux/usb.h>
+#include <linux/smp_lock.h>
+#include <linux/devfs_fs_kernel.h>
+
+#include <linux/ticable.h>
+#include "tiglusb.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "1.02"
+#define DRIVER_AUTHOR "Romain Lievin <[email protected]> & Julien
Blache <[email protected]>"
+#define DRIVER_DESC "TI-GRAPH LINK USB (aka SilverLink) driver"
+#define DRIVER_LICENSE "GPL"
+
+#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
+#if LINUX_VERSION_CODE < VERSION(2,5,0)
+# define minor(x) MINOR(x)
+#endif
+
+/* ----- global variables ---------------------------------------------
*/
+
+static tiglusb_t tiglusb[MAXTIGL];
+static int timeout = TIMAXTIME; /* timeout in tenth of seconds
*/
+
+static devfs_handle_t devfs_handle;
+
+/*---------- misc functions
-----------------------------------------------*/
+
+/* Unregister device */
+static void usblp_cleanup (tiglusb_t *s)
+{
+ devfs_unregister (s->devfs);
+ //memset(tiglusb[s->minor], 0, sizeof(tiglusb_t));
+ info ("tiglusb%d removed", s->minor);
+}
+
+/* Re-initialize device */
+static int clear_device(struct usb_device *dev)
+{
+ if (usb_set_configuration (dev,
dev->config[0].bConfigurationValue) < 0)
+ {
+ printk("tiglusb: clear_device failed\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/* Clear input & output pipes (endpoints) */
+static int clear_pipes(struct usb_device *dev)
+{
+ unsigned int pipe;
+
+ pipe = usb_sndbulkpipe (dev, 1);
+ if(usb_clear_halt(dev, usb_pipeendpoint(pipe))) {
+ printk("tiglusb: clear_pipe (r), request failed\n");
+ return -1;
+ }
+
+ pipe = usb_sndbulkpipe (dev, 2);
+ if(usb_clear_halt(dev, usb_pipeendpoint(pipe))) {
+ printk("tiglusb: clear_pipe (w), request failed\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/* ----- kernel module functions---------------------------------------
*/
+
+// ok
+static int tiglusb_open(struct inode *inode, struct file *file)
+{
+ int devnum = minor(inode->i_rdev);
+ ptiglusb_t s;
+
+ if (devnum < TIUSB_MINOR || devnum >= (TIUSB_MINOR + MAXTIGL))
+ return -EIO;
+
+ s = &tiglusb[devnum - TIUSB_MINOR];
+
+ down(&s->mutex);
+
+ while (!s->dev || s->opened) {
+ up (&s->mutex);
+
+ if (file->f_flags & O_NONBLOCK) {
+ return -EBUSY;
+ }
+ schedule_timeout (HZ / 2);
+
+ if (signal_pending (current)) {
+ return -EAGAIN;
+ }
+ down (&s->mutex);
+ }
+
+ s->opened = 1;
+ up(&s->mutex);
+
+ file->f_pos = 0;
+ file->private_data = s;
+
+ return 0;
+}
+
+//ok
+static int tiglusb_release(struct inode *inode, struct file *file)
+{
+ ptiglusb_t s = (ptiglusb_t) file->private_data;
+
+ lock_kernel();
+ down (&s->mutex);
+ s->state = _stopped;
+ up (&s->mutex);
+
+ if (!s->remove_pending)
+ clear_device(s->dev);
+ else
+ wake_up (&s->remove_ok);
+
+ s->opened = 0;
+ unlock_kernel();
+
+ return 0;
+}
+
+//
+static ssize_t tiglusb_read(struct file *file, char *buf,
+ size_t count, loff_t * ppos)
+{
+ ptiglusb_t s = (ptiglusb_t) file->private_data;
+ ssize_t ret = 0;
+ int bytes_to_read = 0;
+ int bytes_read = 0;
+ int result = 0;
+ char buffer[BULK_RCV_MAX];
+ unsigned int pipe;
+
+ if (*ppos)
+ return -ESPIPE;
+
+ if (s->remove_pending)
+ return -EIO;
+
+ if (!s->dev)
+ return -EIO;
+
+ bytes_to_read = (count >= BULK_RCV_MAX) ? BULK_RCV_MAX : count;
+
+ pipe = usb_rcvbulkpipe (s->dev, 1);
+ result = usb_bulk_msg(s->dev, pipe, buffer, bytes_to_read,
+ &bytes_read, HZ/(timeout/10));
+ if (result == -ETIMEDOUT) { /* NAK */
+ ret = result;
+ if(!bytes_read) {
+ printk("quirk !\n");
+ }
+ warn("tiglusb_read, NAK received.");
+ goto out;
+ }
+ else if (result == -EPIPE) { /* STALL -- shouldn't happen */
+ warn("CLEAR_FEATURE request to remove STALL
condition.\n");
+ if(usb_clear_halt(s->dev, usb_pipeendpoint(pipe)))
+ warn("send_packet, request failed\n");
+ //clear_device(s->dev);
+ ret = result;
+ goto out;
+ }
+ else if (result < 0) { /* We should not get any I/O errors */
+ warn("funky result: %d. Please notify maintainer.",
result);
+ ret = -EIO;
+ goto out;
+ }
+
+ if (copy_to_user(buf, buffer, bytes_read)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ out:
+ return ret ? ret : bytes_read;
+}
+
+//
+static ssize_t tiglusb_write(struct file *file, const char *buf,
+ size_t count, loff_t * ppos)
+{
+ ptiglusb_t s = (ptiglusb_t) file->private_data;
+ ssize_t ret = 0;
+ int bytes_to_write = 0;
+ int bytes_written = 0;
+ int result = 0;
+ char buffer[BULK_SND_MAX];
+ unsigned int pipe;
+
+ if (*ppos)
+ return -ESPIPE;
+
+ if (s->remove_pending)
+ return -EIO;
+
+ if (!s->dev)
+ return -EIO;
+
+ bytes_to_write = (count >= BULK_SND_MAX) ? BULK_SND_MAX : count;
+ if (copy_from_user(buffer, buf, bytes_to_write)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ pipe = usb_sndbulkpipe (s->dev, 2);
+ result = usb_bulk_msg(s->dev, pipe, buffer, bytes_to_write,
+ &bytes_written, HZ/(timeout/10));
+
+ if (result == -ETIMEDOUT) { /* NAK */
+ warn("tiglusb_write, NAK received.");
+ ret = result;
+ goto out;
+ }
+ else if (result == -EPIPE) { /* STALL -- shouldn't happen */
+ warn("CLEAR_FEATURE request to remove STALL
condition.\n");
+ if(usb_clear_halt(s->dev, usb_pipeendpoint(pipe)))
+ warn("send_packet, request failed\n");
+ //clear_device(s->dev);
+ ret = result;
+ goto out;
+ }
+ else if (result < 0) { /* We should not get any I/O errors */
+ warn("funky result: %d. Please notify maintainer.",
result);
+ ret = -EIO;
+ goto out;
+ }
+
+ if (bytes_written != bytes_to_write) {
+ ret = -EIO;
+ goto out;
+ }
+
+ out:
+ return ret ? ret : bytes_written;
+}
+
+//ok
+static int tiglusb_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ ptiglusb_t s = (ptiglusb_t) file->private_data;
+ int ret = 0;
+
+ if (s->remove_pending)
+ return -EIO;
+
+ down (&s->mutex);
+
+ if (!s->dev) {
+ up (&s->mutex);
+ return -EIO;
+ }
+
+ switch (cmd)
+ {
+ case IOCTL_TIUSB_TIMEOUT:
+ timeout = arg ; // timeout value is passed in tenth of
seconds
+ break;
+ case IOCTL_TIUSB_RESET_DEVICE:
+ printk(KERN_DEBUG "IOCTL_TIGLUSB_RESET_DEVICE\n");
+ if(clear_device(s->dev))
+ ret = -EIO;
+ break;
+ case IOCTL_TIUSB_RESET_PIPES:
+ printk(KERN_DEBUG "IOCTL_TIGLUSB_RESET_PIPES\n");
+ if(clear_pipes(s->dev))
+ ret = -EIO;
+ break;
+ default:
+ ret = -ENOTTY;
+ break;
+ }
+
+ up (&s->mutex);
+
+ return ret;
+}
+
+/* ----- kernel module registering ------------------------------------
*/
+
+static struct file_operations tiglusb_fops =
+{
+ owner: THIS_MODULE,
+ llseek: no_llseek,
+ read: tiglusb_read,
+ write: tiglusb_write,
+ ioctl: tiglusb_ioctl,
+ open: tiglusb_open,
+ release: tiglusb_release,
+};
+
+//ok
+static int tiglusb_find_struct (void)
+{
+ int u;
+
+ for (u=0; u<MAXTIGL; u++)
+ {
+ ptiglusb_t s = &tiglusb[u];
+ if (!s->dev)
+ return u;
+ }
+
+ return -1;
+}
+
+/* --- initialisation code ------------------------------------- */
+
+//ok
+static void *tiglusb_probe (struct usb_device *dev, unsigned int ifnum,
+ const struct usb_device_id *id)
+{
+ int minor;
+ ptiglusb_t s;
+ char name[8];
+
+ printk("tiglusb: probing vendor id 0x%x, device id 0x%x
ifnum:%d\n",
+ dev->descriptor.idVendor, dev->descriptor.idProduct,
ifnum);
+
+ /*
+ * We don't handle multiple configurations. As of version 0x0103
of
+ * the TIGL hardware, there's only 1 configuration.
+ */
+
+ if (dev->descriptor.bNumConfigurations != 1)
+ return NULL;
+
+ if ((dev->descriptor.idProduct != 0xe001) &&
+ (dev->descriptor.idVendor != 0x451))
+ return NULL;
+
+ if (usb_set_configuration (dev,
dev->config[0].bConfigurationValue) < 0) {
+ printk("tiglusb_probe: set_configuration failed\n");
+ return NULL;
+ }
+
+ minor = tiglusb_find_struct ();
+ if (minor == -1)
+ return NULL;
+
+ s = &tiglusb[minor];
+
+ down (&s->mutex);
+ s->remove_pending = 0;
+ s->dev = dev;
+ up (&s->mutex);
+ dbg("bound to interface: %d", ifnum);
+
+ sprintf(name, "%d", s->minor);
+ printk("tiglusb: registering to devfs : major = %d, minor = %d,
node = %s\n", TIUSB_MAJOR, (TIUSB_MINOR + s->minor), name);
+ s->devfs = devfs_register(devfs_handle, name,
+ DEVFS_FL_DEFAULT, TIUSB_MAJOR,
+ TIUSB_MINOR + s->minor,
+ S_IFCHR | S_IRUGO | S_IWUGO,
+ &tiglusb_fops, NULL);
+
+ /* Display firmware version */
+ printk("tiglusb: link cable version %i.%02x\n",
+ dev->descriptor.bcdDevice >> 8,
+ dev->descriptor.bcdDevice & 0xff);
+
+ return s;
+}
+
+//ok
+static void tiglusb_disconnect (struct usb_device *dev, void
*drv_context)
+{
+ ptiglusb_t s = (ptiglusb_t) drv_context;
+
+ if (!s || !s->dev)
+ printk("bogus disconnect");
+
+ s->remove_pending = 1;
+ wake_up (&s->wait);
+ if (s->state == _started)
+ sleep_on (&s->remove_ok);
+ s->dev = NULL;
+ s->opened = 0;
+
+ /* cleanup now or later, on close*/
+ if (!s->opened)
+ usblp_cleanup (s);
+ else
+ up (&s->mutex);
+
+ /* unregister device */
+ devfs_unregister(s->devfs); s->devfs = NULL;
+ printk("tiglusb: device disconnected\n");
+}
+
+static struct usb_device_id tiglusb_ids [] = {
+ { USB_DEVICE(0x0451, 0xe001) },
+ { }
+};
+
+MODULE_DEVICE_TABLE (usb, tiglusb_ids);
+
+static struct usb_driver tiglusb_driver =
+{
+ name: "tiglusb",
+ probe: tiglusb_probe,
+ disconnect: tiglusb_disconnect,
+ fops: &tiglusb_fops,
+ minor: TIUSB_MINOR,
+ id_table: tiglusb_ids,
+};
+
+/* --- initialisation code ------------------------------------- */
+
+#ifndef MODULE
+/* You must set these - there is no sane way to probe for this
cable.
+ * You can use 'tipar=timeout,delay' to set these now. */
+static int __init tiglusb_setup (char *str)
+{
+ int ints[2];
+
+ str = get_options (str, ARRAY_SIZE(ints), ints);
+
+ if (ints[0] > 0) {
+ timeout = ints[1];
+ }
+
+ return 1;
+}
+#endif
+
+static int __init tiglusb_init (void)
+{
+ unsigned u;
+ int result;
+
+ /* initialize struct */
+ for (u = 0; u < MAXTIGL; u++)
+ {
+ ptiglusb_t s = &tiglusb[u];
+ memset (s, 0, sizeof (tiglusb_t));
+ init_MUTEX (&s->mutex);
+ s->dev = NULL;
+ s->minor = u;
+ s->opened = 0;
+ init_waitqueue_head (&s->wait);
+ init_waitqueue_head (&s->remove_ok);
+ }
+
+ /* register device */
+ if (devfs_register_chrdev (TIUSB_MAJOR, "tiglusb",
&tiglusb_fops)) {
+ printk("tiglusb: unable to get major %d\n", TIUSB_MAJOR);
+ return -EIO;
+ }
+
+ /* Use devfs, tree: /dev/ticables/usb/[0..3]*/
+ devfs_handle = devfs_mk_dir(NULL, "ticables/usb", NULL);
+
+ /* register USB module */
+ result = usb_register(&tiglusb_driver);
+ if (result < 0) {
+ devfs_unregister_chrdev(TIUSB_MAJOR, "tiglusb");
+ return -1;
+ }
+
+ info(DRIVER_DESC ", " DRIVER_VERSION);
+
+ return 0;
+}
+
+static void __exit tiglusb_cleanup (void)
+{
+ usb_deregister (&tiglusb_driver);
+ devfs_unregister (devfs_handle);
+ devfs_unregister_chrdev(TIUSB_MAJOR, "tiglusb");
+}
+
+/*
--------------------------------------------------------------------- */
+
+__setup("tipar=", tiglusb_setup);
+module_init(tiglusb_init);
+module_exit(tiglusb_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+EXPORT_NO_SYMBOLS;
+
+MODULE_PARM(timeout, "i");
+MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)");
+
+/*
--------------------------------------------------------------------- */
--- linux.orig/drivers/usb/tiglusb.h Sun Mar 31 22:02:57 2002
+++ linux/drivers/usb/tiglusb.h Sun Mar 31 22:05:05 2002
@@ -0,0 +1,58 @@
+/* Hey EMACS -*- linux-c -*-
+ *
+ * tiglusb - low level driver for SilverLink cable
+ *
+ * Copyright (C) 2000-2002, Romain Lievin <[email protected]>
+ * under the terms of the GNU General Public License.
+ *
+ * Redistribution of this file is permitted under the terms of the GNU
+ * Public License (GPL)
+ */
+
+#ifndef _TIGLUSB_H
+#define _TIGLUSB_H
+
+/*
+ * Max. number of devices supported
+ */
+#define MAXTIGL 16
+
+/*
+ * Max. packetsize for IN and OUT pipes
+ */
+#define BULK_RCV_MAX 32
+#define BULK_SND_MAX 32
+
+/*
+ * The driver context...
+ */
+
+typedef enum { _stopped=0, _started } driver_state_t;
+
+typedef struct
+{
+ struct usb_device *dev; /* USB device handle */
+ struct semaphore mutex; /* locks this struct */
+ struct semaphore sem;
+
+ wait_queue_head_t wait; /* for timed waits */
+ wait_queue_head_t remove_ok;
+
+ int minor; /* which minor dev #? */
+ devfs_handle_t devfs; /* devfs device */
+
+ driver_state_t state; /* started/stopped */
+ int opened; /* tru if open */
+ int remove_pending;
+
+ struct urb readurb, writeurb; /* The urbs */
+ int wcomplete, rcomplete; /* R/W is complete */
+
+ char rd_buf[BULK_RCV_MAX]; /* read buffer */
+ char wr_buf[BULK_SND_MAX]; /* write buffer */
+
+} tiglusb_t, *ptiglusb_t;
+
+extern devfs_handle_t usb_devfs_handle; /* /dev/usb
dir. */
+
+#endif
--- linux.orig/include/linux/ticable.h Sun Mar 31 22:05:42 2002
+++ linux/include/linux/ticable.h Sun Mar 31 22:05:53 2002
@@ -0,0 +1,42 @@
+/* Hey EMACS -*- linux-c -*-
+ *
+ * tipar/tiser/tiusb - low level driver for handling link cables
+ * designed for Texas Instruments graphing calculators.
+ *
+ * Copyright (C) 2000-2002, Romain Lievin <[email protected]>
+ *
+ * Redistribution of this file is permitted under the terms of the GNU
+ * Public License (GPL)
+ */
+
+#ifndef _TICABLE_H
+#define _TICABLE_H 1
+
+/* Internal default constants for the kernel module */
+#define TIMAXTIME 15 /* 1.5 seconds */
+#define IO_DELAY 10 /* 10 micro-seconds */
+
+/* Major & minor number for character devices */
+#define TIPAR_MAJOR 115 /* 0 to 7 */
+#define TIPAR_MINOR 0
+
+#define TISER_MAJOR 115 /* 8 to 15 */
+#define TISER_MINOR 8
+
+#define TIUSB_MAJOR 115 /* 16 to 31 */
+#define TIUSB_MINOR 16
+
+/*
+ * Request values for the 'ioctl' function.
+ */
+#define IOCTL_TIPAR_DELAY _IOW('p', 0xa8, int) /* set delay */
+#define IOCTL_TIPAR_TIMEOUT _IOW('p', 0xa9, int) /* set timeout */
+
+#define IOCTL_TISER_DELAY _IOW('p', 0xa0, int) /* set delay */
+#define IOCTL_TISER_TIMEOUT _IOW('p', 0xa1, int) /* set timeout */
+
+#define IOCTL_TIUSB_TIMEOUT _IOW('N', 0x20, int) /* set timeout
*/
+#define IOCTL_TIUSB_RESET_DEVICE _IOW('N', 0x21, int) /* reset device
*/
+#define IOCTL_TIUSB_RESET_PIPES _IOW('N', 0x22, int) /* reset both
pipes*/
+
+#endif /* TICABLE_H */
--- linux.orig/MAINTAINERS Mon Mar 18 21:37:04 2002
+++ linux/MAINTAINERS Sun Mar 31 22:01:20 2002
@@ -1502,6 +1502,13 @@
M: [email protected]
S: Maintained
+TI GRAPH LINK USB (SilverLink) CABLE DRIVER
+P: Romain Lievin
+M: [email protected]
+P: Julien Blache
+M: [email protected]
+S: Maintained
+
TLAN NETWORK DRIVER
P: Torben Mathiasen
M: [email protected]
--- linux.orig/drivers/usb/Config.help Mon Mar 18 21:37:13 2002
+++ linux/drivers/usb/Config.help Sun Mar 31 22:09:36 2002
@@ -626,3 +626,21 @@
The module will be called bluetooth.o. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
+CONFIG_USB_TIGL
+ If you own a Texas Instruments graphing calculator and use a
+ TI-GRAPH LINK USB cable (aka SilverLink), then you might be
+ interested in this driver.
+
+ If you enable this driver, you will be able to communicate with
+ your calculator through a set of device nodes under /dev.
+
+ This code is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called tiglusb.o. If you want to compile it as a
+ module, say M here and read Documentation/modules.txt.
+
+ If you don't know what the SilverLink cable is or what a Texas
+ Instruments graphing calculator is, then you probably don't need this
+ driver.
+
+ If unsure, say N.
\ No newline at end of file
--- linux.orig/drivers/usb/Config.in Mon Mar 18 21:37:13 2002
+++ linux/drivers/usb/Config.in Sun Mar 31 22:00:49 2002
@@ -101,6 +101,7 @@
comment 'USB Miscellaneous drivers'
dep_tristate ' USB Diamond Rio500 support (EXPERIMENTAL)'
CONFIG_USB_RIO500 $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate ' USB Auerswald ISDN support (EXPERIMENTAL)'
CONFIG_USB_AUERSWALD $CONFIG_USB $CONFIG_EXPERIMENTAL
+ dep_tristate 'Texas Instruments Graph Link USB (aka SilverLink)
cable support' CONFIG_USB_TIGL $CONFIG_USB
fi
endmenu
--- linux.orig/drivers/usb/Makefile Mon Mar 18 21:37:18 2002
+++ linux/drivers/usb/Makefile Sun Mar 31 22:01:46 2002
@@ -86,6 +86,7 @@
obj-$(CONFIG_USB_BLUETOOTH) += bluetooth.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_AUERSWALD) += auerswald.o
+obj-$(CONFIG_USB_TIGL) += tiglusb.o
# Object files in subdirectories
mod-subdirs := serial hcd
--- linux.orig/Documentation/usb/silverlink.txt Sun Mar 31 22:02:45 2002
+++ linux/Documentation/usb/silverlink.txt Sun Mar 31 22:07:08 2002
@@ -0,0 +1,80 @@
+-------------------------------------------------------------------------
+Readme for Linux device driver for the Texas Instruments SilverLink
cable
+-------------------------------------------------------------------------
+
+Author: Romain Li?vin & Julien Blache
+Homepage: http://lpg.ticalc.org/prj_usb
+
+INTRODUCTION:
+
+This is a driver for the TI-GRAPH LINK USB (aka SilverLink) cable, a
cable
+designed by TI for connecting their TI8x/9x calculators to a computer
+(PC or Mac usually).
+
+If you need more information, please visit the 'SilverLink drivers'
homepage
+at the above URL.
+
+WHAT YOU NEED:
+
+A TI calculator of course and a program capable to communicate with
your
+calculator.
+TiLP will work for sure (since I am his developer !). yal92 may be able
to use
+it by changing tidev for tiglusb (may require some hacking...).
+
+HOW TO USE IT:
+
+You must have first compiled USB support, support for your specific USB
host
+controller (UHCI or OHCI).
+
+Next, (as root) from your appropriate modules directory
(lib/modules/2.5.XX):
+
+ insmod usb/usbcore.o
+ insmod usb/usb-uhci.o <OR> insmod usb/ohci-hcd.o
+ insmod tiglusb.o
+
+If it is not already there (it usually is), create the device:
+
+ mknod /dev/tiglusb0 c 115 16
+
+You will have to set permissions on this device to allow you to
read/write
+from it:
+
+ chmod 666 /dev/tiglusb0
+
+Now you are ready to run a linking program such as TiLP. Be sure to
configure
+it properly (RTFM).
+
+MODULE PARAMETERS:
+
+ You can set these with: insmod tiglusb NAME=VALUE
+ There is currently no way to set these on a per-cable basis.
+
+ NAME: timeout
+ TYPE: integer
+ DEFAULT: 15
+ DESC: Timeout value in tenth of seconds. If no data is available once
this
+ time has expired then the driver will return with a timeout
error.
+
+QUIRKS:
+
+The following problem seems to be specific to the link cable since it
appears
+on all platforms (Linux, Windows, Mac OS-X).
+
+In some very particular cases, the driver returns with success but
+without any data. The application should retry a read operation at
least once.
+
+HOW TO CONTACT US:
+
+You can email me at [email protected]. Please prefix the subject line
+with "TIGLUSB: " so that I am certain to notice your message.
+You can also mail JB at [email protected]: he has written the first
release of
+this driver but he better knows the Mac OS-X driver.
+
+CREDITS:
+
+The code is based on dabusb.c, printer.c and scanner.c !
+The driver has been developed independantly of Texas Instruments.
On Sun, Mar 31, 2002 at 10:31:23PM +0200, Romain Li?vin wrote:
> Hi,
>
> > > this is a new driver for handling a TI-GRAPH LINK USB (aka SilverLink)
> > > cable
> > > designed to connect a Texas Instruments graphing calculators to a
> > > computer/workstation through USB.
> > >
> > > This driver has an official device number.
> >
> > Do you want to add this driver to the drivers/usb/ directory with the
> > rest of the kernel USB drivers? If so, please send me a patch.
>
> Yes, I would like to add it. You will find the complete patch below.
The patch has lines wrapped, so it will not apply. Can you fix this and
send it again?
> I do not know whether it's the best thing to do. The 2 others use the
> same bit-banging scheme and could be grouped under a sub-system (such as
> I2C). The USB module is different. Maybe it's better to register it
> under the USB sub-system...
It's up to you. But in looking at the driver some more, is there any
reason it has to be in kernel space? Can't you do everything you need
from userspace and use usbfs (or libusb) to talk to the device?
thanks,
greg k-h