Manish Lachwani wrote:
> I had found problems when using burnk6 on the CPUs. After running
> burnk6 for severl hrs, the CPUs used to get underclocked on bootup. I
> had also noticed occasional hangs on such CPUs
>
Well, burnK7 crashes this system pretty easily (few minutes). I also
get "254" error codes from it which apparently indicate an
"integer/memory error".
I've been trying to run "sensors" (from lm_sensors) to see if I can see
and voltage or temp issues while burnK7 is running, but I'm skeptical
that the temp readings are correct as they aren't moving much.
- Orion