Whilst trying to find out why 53/54 is not detecting everything on my
pci bus (See my previous mails e1000 not detected and pci problems) I
found a problem with menuconfig
In the PCI Bus section, setting the pci access method to BIOS or direct
does not get saved on exit. It always defaults back to "Any" on next
make menuconfig
My problem regarding an incomplete pci bus scan is also still
outstanding; Any help or suggestions where to look in the code would be
apprieciated.
Andrew
Hi,
Andrew Walrond wrote:
> In the PCI Bus section, setting the pci access method to BIOS or direct
> does not get saved on exit. It always defaults back to "Any" on next
> make menuconfig
Can you send me your .config? I cannot reproduce it here.
bye, Roman
Hmmm It works here now. (I got it to work after my email by editing the
.config file by hand and running it through make oldconfig). Now it
seems to work in make menuconfig as well.
I'll revert to my original .config (copied from 2.5.53) and try from
scratch again, and get back to you
Andrew
Roman Zippel wrote:
> Hi,
>
> Andrew Walrond wrote:
>
>
>>In the PCI Bus section, setting the pci access method to BIOS or direct
>>does not get saved on exit. It always defaults back to "Any" on next
>>make menuconfig
>
>
> Can you send me your .config? I cannot reproduce it here.
>
> bye, Roman
>
Roman,
I cannot reproduce this myself now. Please disregard.
Andrew
Roman Zippel wrote:
> Hi,
>
> Andrew Walrond wrote:
>
>
>>In the PCI Bus section, setting the pci access method to BIOS or direct
>>does not get saved on exit. It always defaults back to "Any" on next
>>make menuconfig
>
>
> Can you send me your .config? I cannot reproduce it here.
>
> bye, Roman
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>