Hi,
I am having problems using kernel 2.4.20 with built-in scsi-emulation
and a newly installed Sony CDRW drive. I've seen posts on ide-scsi on
the list in the past, but nothing this specific, so I am forwarding this
info to the list for anyone interested. The kernel recognizes the drive
fine and 'cdrecord -scanbus' yields the following info:
scsibus0:
0,0,0 0) 'SONY ' 'CD-RW CRX185E1 ' 'XYS2' Removable CD-ROM
0,1,0 1) 'TOSHIBA ' 'DVD-ROM SD-R1002' '1034' Removable CD-ROM
0,2,0 2) *
...etc. This kernel has worked fine with the toshiba CDRW drive, but
since installing and using the Sony on four separate occasions I have
had lockups requiring a hard reset, once when ripping an audio CD, once
when using gnome2's cdplayer and the other two using 'eject /dev/sr0' at
the command line. At other times it works just fine. This or something
similar is found in the kernel log of the events:
=================================================================
Jan 27 12:32:13 iii kernel: scsi : aborting command due to timeout : pid
202550, scsi0, channel 0, id 0, lun 0 0x25 00 00 00 00 00 00 00 00 00
Jan 27 12:32:13 iii kernel: hdc: irq timeout: status=0xd0 { Busy }
Jan 27 12:32:13 iii kernel: hdc: DMA disabled
Jan 27 12:32:13 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:13 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:13 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:15 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:15 iii kernel: scsi0 channel 0 : resetting for second half
of retries.
Jan 27 12:32:15 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:32:15 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:32:15 iii kernel: hdc: drive not ready for command
Jan 27 12:32:15 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:45 iii kernel: scsi : aborting command due to timeout : pid
202551, scsi0, channel 0, id 0, lun 0 0x25 00 00 00 00 00 00 00 00 00
Jan 27 12:32:45 iii kernel: SCSI host 0 abort (pid 202551) timed out -
resetting
Jan 27 12:32:45 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:32:45 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:45 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:47 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:47 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:32:47 iii kernel: hdc: drive not ready for command
==============this repeats until the following pid==========
Jan 27 12:53:01 iii kernel: scsi : aborting command due to timeout : pid
202654, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:01 iii kernel: SCSI host 0 abort (pid 202654) timed out -
resetting
Jan 27 12:53:01 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:02 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:02 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:03 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:03 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:03 iii kernel: hdc: drive not ready for command
Jan 27 12:53:04 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:10 iii kernel: Unable to handle kernel paging request at
virtual address 0c758b10
Jan 27 12:53:10 iii kernel: printing eip:
Jan 27 12:53:10 iii kernel: c014beb4
Jan 27 12:53:10 iii kernel: *pde = 00000000
Jan 27 12:53:10 iii kernel: Oops: 0000
Jan 27 12:53:10 iii kernel: CPU: 0
Jan 27 12:53:10 iii kernel: EIP: 0010:[proc_check_root+132/272]
Tainted: P
Jan 27 12:53:10 iii kernel: EFLAGS: 00210207
Jan 27 12:53:10 iii kernel: eax: 0c758b08 ebx: c158d3c0 ecx:
d9940000 edx: 0c758b08
Jan 27 12:53:10 iii kernel: esi: c1588b40 edi: d9940000 ebp:
c158d3c0 esp: c6465efc
Jan 27 12:53:10 iii kernel: ds: 0018 es: 0018 ss: 0018
Jan 27 12:53:10 iii kernel: Process ps (pid: 17219, stackpage=c6465000)
Jan 27 12:53:10 iii kernel: Stack: cbb102c0 ffffffec c6465fa4 cbb102c0
00000000 c15eac00 0c758b08 c014bf5d
Jan 27 12:53:10 iii kernel: cbb102c0 c7599f40 c013989f cbb102c0
00000001 c013a388 cbb102c0 00000001
Jan 27 12:53:10 iii kernel: c6465fa4 caf3b000 00000000 00000008
bffff710 00000008 caf3b00f c7599f40
Jan 27 12:53:10 iii kernel: Call Trace: [proc_permission+29/48]
[permission+31/48] [link_path_walk+2104/2144] [path_walk+26/32]
[path_lookup+27/48]
Jan 27 12:53:10 iii kernel: [__user_walk+38/64] [sys_readlink+48/160]
[sys_close+67/96] [system_call+51/56]
Jan 27 12:53:10 iii kernel:
Jan 27 12:53:10 iii kernel: Code: 8b 50 08 39 d0 74 65 8b 40 0c 89 54 24
18 39 da 75 ea 56 50
Jan 27 12:53:13 iii kernel: scsi : aborting command due to timeout :
pid 202655, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:13 iii kernel: SCSI host 0 abort (pid 202655) timed out -
resetting
Jan 27 12:53:13 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:14 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:14 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:14 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:15 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:15 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:15 iii kernel: hdc: drive not ready for command
Jan 27 12:53:16 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:19 iii kernel: Unable to handle kernel paging request at
virtual address 0c758b10
Jan 27 12:53:19 iii kernel: printing eip:
Jan 27 12:53:19 iii kernel: c014beb4
Jan 27 12:53:19 iii kernel: *pde = 00000000
Jan 27 12:53:19 iii kernel: Oops: 0000
Jan 27 12:53:19 iii kernel: CPU: 0
Jan 27 12:53:19 iii kernel: EIP: 0010:[proc_check_root+132/272]
Tainted: P
Jan 27 12:53:19 iii kernel: EFLAGS: 00210207
Jan 27 12:53:19 iii kernel: eax: 0c758b08 ebx: c158d3c0 ecx:
d9940000 edx: 0c758b08
Jan 27 12:53:19 iii kernel: esi: c1588b40 edi: d9940000 ebp:
c158d3c0 esp: cd86defc
Jan 27 12:53:19 iii kernel: ds: 0018 es: 0018 ss: 0018
Jan 27 12:53:19 iii kernel: Process ps (pid: 17220, stackpage=cd86d000)
Jan 27 12:53:19 iii kernel: Stack: cbb102c0 ffffffec cd86dfa4 cbb102c0
00000000 c15eac00 0c758b08 c014bf5d
Jan 27 12:53:19 iii kernel: cbb102c0 c7599f40 c013989f cbb102c0
00000001 c013a388 cbb102c0 00000001
Jan 27 12:53:19 iii kernel: cd86dfa4 cf186000 00000000 00000008
bffff710 00000008 cf18600f c7599f40
Jan 27 12:53:19 iii kernel: Call Trace: [proc_permission+29/48]
[permission+31/48] [link_path_walk+2104/2144] [path_walk+26/32]
[path_lookup+27/48]
Jan 27 12:53:19 iii kernel: [__user_walk+38/64] [sys_readlink+48/160]
[sys_close+67/96] [system_call+51/56]
Jan 27 12:53:19 iii kernel:
Jan 27 12:53:19 iii kernel: Code: 8b 50 08 39 d0 74 65 8b 40 0c 89 54 24
18 39 da 75 ea 56 50
Jan 27 12:53:25 iii kernel: scsi : aborting command due to timeout :
pid 202656, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:25 iii kernel: SCSI host 0 abort (pid 202656) timed out -
resetting
Jan 27 12:53:25 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:26 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:26 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:27 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:27 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:27 iii kernel: hdc: drive not ready for command
Jan 27 12:53:28 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:37 iii kernel: scsi : aborting command due to timeout : pid
202657, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:37 iii kernel: SCSI host 0 abort (pid 202657) timed out -
resetting
Jan 27 12:53:37 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:38 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:38 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:38 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:39 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:39 iii kernel: hdc: drive not ready for command
Jan 27 12:53:40 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:46 iii kernel: Unable to handle kernel paging request at
virtual address 00020001
Jan 27 12:53:46 iii kernel: printing eip:
Jan 27 12:53:46 iii kernel: c014bcba
Jan 27 12:53:46 iii kernel: *pde = 00000000
Jan 27 12:53:46 iii kernel: Oops: 0002
Jan 27 12:53:46 iii kernel: CPU: 0
Jan 27 12:53:46 iii kernel: EIP: 0010:[proc_root_link+26/96] Tainted: P
Jan 27 12:53:46 iii kernel: EFLAGS: 00210202
Jan 27 12:53:46 iii kernel: eax: d430e000 ebx: fffffffe ecx:
00020001 edx: d2901f10
Jan 27 12:53:46 iii kernel: esi: ffffffec edi: d2901fa4 ebp:
cbb102c0 esp: d2901ee8
Jan 27 12:53:46 iii kernel: ds: 0018 es: 0018 ss: 0018
Jan 27 12:53:46 iii kernel: Process ps (pid: 17221, stackpage=d2901000)
Jan 27 12:53:46 iii kernel: Stack: cbb102c0 c014be53 cbb102c0 d2901f10
d2901f14 cbb102c0 ffffffec d2901fa4
Jan 27 12:53:46 iii kernel: cbb102c0 00000000 d2901fa4 c014bf50
c014bf5d cbb102c0 c7599f40 c013989f
Jan 27 12:53:46 iii kernel: cbb102c0 00000001 c013a388 cbb102c0
00000001 d2901fa4 d50f0000 00000000
Jan 27 12:53:46 iii kernel: Call Trace: [proc_check_root+35/272]
[proc_permission+16/48] [proc_permission+29/48] [permission+31/48]
[link_path_walk+2104/2144]
Jan 27 12:53:46 iii kernel: [path_walk+26/32] [path_lookup+27/48]
[__user_walk+38/64] [sys_readlink+48/160] [sys_close+67/96]
[system_call+51/56]
Jan 27 12:53:46 iii kernel:
Jan 27 12:53:46 iii kernel: Code: ff 01 8b 51 14 85 d2 74 03 ff 42 28 8b
44 24 10 89 10 8b 51
Jan 27 12:53:49 iii kernel: scsi : aborting command due to timeout :
pid 202658, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:50 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:50 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:50 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:50 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:50 iii kernel: hdc: drive not ready for command
Jan 27 12:53:50 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:56 iii kernel: Unable to handle kernel paging request at
virtual address 00020001
Jan 27 12:53:56 iii kernel: printing eip:
Jan 27 12:53:56 iii kernel: c014bcba
Jan 27 12:53:56 iii kernel: *pde = 00000000
Jan 27 12:53:56 iii kernel: Oops: 0002
Jan 27 12:53:56 iii kernel: CPU: 0
Jan 27 12:53:56 iii kernel: EIP: 0010:[proc_root_link+26/96] Tainted: P
Jan 27 12:53:56 iii kernel: EFLAGS: 00210202
Jan 27 12:53:56 iii kernel: eax: d430e000 ebx: fffffffe ecx:
00020001 edx: d2901f10
Jan 27 12:53:56 iii kernel: esi: ffffffec edi: d2901fa4 ebp:
cbb102c0 esp: d2901ee8
Jan 27 12:53:56 iii kernel: ds: 0018 es: 0018 ss: 0018
Jan 27 12:53:56 iii kernel: Process ps (pid: 17223, stackpage=d2901000)
Jan 27 12:53:56 iii kernel: Stack: cbb102c0 c014be53 cbb102c0 d2901f10
d2901f14 cbb102c0 ffffffec d2901fa4
Jan 27 12:53:56 iii kernel: cbb102c0 00000000 d2901fa4 c014bf50
c014bf5d cbb102c0 c7599f40 c013989f
Jan 27 12:53:56 iii kernel: cbb102c0 00000001 c013a388 cbb102c0
00000001 d2901fa4 d7969000 00000000
Jan 27 12:53:56 iii kernel: Call Trace: [proc_check_root+35/272]
[proc_permission+16/48] [proc_permission+29/48] [permission+31/48]
[link_path_walk+2104/2144]
Jan 27 12:53:56 iii kernel: [path_walk+26/32] [path_lookup+27/48]
[__user_walk+38/64] [sys_readlink+48/160] [sys_close+67/96]
[system_call+51/56]
Jan 27 12:53:56 iii kernel:
Jan 27 12:53:56 iii kernel: Code: ff 01 8b 51 14 85 d2 74 03 ff 42 28 8b
44 24 10 89 10 8b 51
Jan 27 12:54:00 iii kernel: scsi : aborting command due to timeout :
pid 202659, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:54:00 iii kernel: SCSI host 0 abort (pid 202659) timed out -
resetting
Jan 27 12:54:00 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:54:00 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:54:00 iii kernel: hdc: ATAPI reset complete
Jan 27 12:54:02 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:54:02 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:54:02 iii kernel: hdc: drive not ready for command
Jan 27 12:54:02 iii kernel: hdc: ATAPI reset complete
Jan 27 12:54:12 iii kernel: scsi : aborting command due to timeout : pid
202660, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:54:12 iii kernel: SCSI host 0 abort (pid 202660) timed out -
resetting
======================================================================
At which point everything freezes, the keyboard LEDs flash and no
combination of three fingered salutes revives the system.
THis is my first post to the list so I apologize if any of this is
superfluous.
Search recent history, Sony CDRW's are known problems.
Andre Hedrick
LAD Storage Consulting Group
On Wed, 29 Jan 2003, Howard Shane wrote:
> Hi,
>
> I am having problems using kernel 2.4.20 with built-in scsi-emulation
> and a newly installed Sony CDRW drive. I've seen posts on ide-scsi on
> the list in the past, but nothing this specific, so I am forwarding this
> info to the list for anyone interested. The kernel recognizes the drive
> fine and 'cdrecord -scanbus' yields the following info:
>
> scsibus0:
> 0,0,0 0) 'SONY ' 'CD-RW CRX185E1 ' 'XYS2' Removable CD-ROM
> 0,1,0 1) 'TOSHIBA ' 'DVD-ROM SD-R1002' '1034' Removable CD-ROM
> 0,2,0 2) *
>
> ...etc. This kernel has worked fine with the toshiba CDRW drive, but
> since installing and using the Sony on four separate occasions I have
> had lockups requiring a hard reset, once when ripping an audio CD, once
> when using gnome2's cdplayer and the other two using 'eject /dev/sr0' at
> the command line. At other times it works just fine. This or something
> similar is found in the kernel log of the events:
>
> =================================================================
>
> Jan 27 12:32:13 iii kernel: scsi : aborting command due to timeout : pid
> 202550, scsi0, channel 0, id 0, lun 0 0x25 00 00 00 00 00 00 00 00 00
> Jan 27 12:32:13 iii kernel: hdc: irq timeout: status=0xd0 { Busy }
> Jan 27 12:32:13 iii kernel: hdc: DMA disabled
> Jan 27 12:32:13 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:32:13 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:32:13 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:32:15 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:32:15 iii kernel: scsi0 channel 0 : resetting for second half
> of retries.
> Jan 27 12:32:15 iii kernel: SCSI bus is being reset for host 0 channel 0.
> Jan 27 12:32:15 iii kernel: hdc: status timeout: status=0xc0 { Busy }
> Jan 27 12:32:15 iii kernel: hdc: drive not ready for command
> Jan 27 12:32:15 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:32:45 iii kernel: scsi : aborting command due to timeout : pid
> 202551, scsi0, channel 0, id 0, lun 0 0x25 00 00 00 00 00 00 00 00 00
> Jan 27 12:32:45 iii kernel: SCSI host 0 abort (pid 202551) timed out -
> resetting
> Jan 27 12:32:45 iii kernel: SCSI bus is being reset for host 0 channel 0.
> Jan 27 12:32:45 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:32:45 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:32:47 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:32:47 iii kernel: hdc: status timeout: status=0xc0 { Busy }
> Jan 27 12:32:47 iii kernel: hdc: drive not ready for command
>
> ==============this repeats until the following pid==========
> Jan 27 12:53:01 iii kernel: scsi : aborting command due to timeout : pid
> 202654, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
> Jan 27 12:53:01 iii kernel: SCSI host 0 abort (pid 202654) timed out -
> resetting
> Jan 27 12:53:01 iii kernel: SCSI bus is being reset for host 0 channel 0.
> Jan 27 12:53:02 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:53:02 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:03 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:53:03 iii kernel: hdc: status timeout: status=0xc0 { Busy }
> Jan 27 12:53:03 iii kernel: hdc: drive not ready for command
> Jan 27 12:53:04 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:10 iii kernel: Unable to handle kernel paging request at
> virtual address 0c758b10
> Jan 27 12:53:10 iii kernel: printing eip:
> Jan 27 12:53:10 iii kernel: c014beb4
> Jan 27 12:53:10 iii kernel: *pde = 00000000
> Jan 27 12:53:10 iii kernel: Oops: 0000
> Jan 27 12:53:10 iii kernel: CPU: 0
> Jan 27 12:53:10 iii kernel: EIP: 0010:[proc_check_root+132/272]
> Tainted: P
> Jan 27 12:53:10 iii kernel: EFLAGS: 00210207
> Jan 27 12:53:10 iii kernel: eax: 0c758b08 ebx: c158d3c0 ecx:
> d9940000 edx: 0c758b08
> Jan 27 12:53:10 iii kernel: esi: c1588b40 edi: d9940000 ebp:
> c158d3c0 esp: c6465efc
> Jan 27 12:53:10 iii kernel: ds: 0018 es: 0018 ss: 0018
> Jan 27 12:53:10 iii kernel: Process ps (pid: 17219, stackpage=c6465000)
> Jan 27 12:53:10 iii kernel: Stack: cbb102c0 ffffffec c6465fa4 cbb102c0
> 00000000 c15eac00 0c758b08 c014bf5d
> Jan 27 12:53:10 iii kernel: cbb102c0 c7599f40 c013989f cbb102c0
> 00000001 c013a388 cbb102c0 00000001
> Jan 27 12:53:10 iii kernel: c6465fa4 caf3b000 00000000 00000008
> bffff710 00000008 caf3b00f c7599f40
> Jan 27 12:53:10 iii kernel: Call Trace: [proc_permission+29/48]
> [permission+31/48] [link_path_walk+2104/2144] [path_walk+26/32]
> [path_lookup+27/48]
> Jan 27 12:53:10 iii kernel: [__user_walk+38/64] [sys_readlink+48/160]
> [sys_close+67/96] [system_call+51/56]
> Jan 27 12:53:10 iii kernel:
> Jan 27 12:53:10 iii kernel: Code: 8b 50 08 39 d0 74 65 8b 40 0c 89 54 24
> 18 39 da 75 ea 56 50
> Jan 27 12:53:13 iii kernel: scsi : aborting command due to timeout :
> pid 202655, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
> Jan 27 12:53:13 iii kernel: SCSI host 0 abort (pid 202655) timed out -
> resetting
> Jan 27 12:53:13 iii kernel: SCSI bus is being reset for host 0 channel 0.
> Jan 27 12:53:14 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:53:14 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:14 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:15 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:53:15 iii kernel: hdc: status timeout: status=0xc0 { Busy }
> Jan 27 12:53:15 iii kernel: hdc: drive not ready for command
> Jan 27 12:53:16 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:19 iii kernel: Unable to handle kernel paging request at
> virtual address 0c758b10
> Jan 27 12:53:19 iii kernel: printing eip:
> Jan 27 12:53:19 iii kernel: c014beb4
> Jan 27 12:53:19 iii kernel: *pde = 00000000
> Jan 27 12:53:19 iii kernel: Oops: 0000
> Jan 27 12:53:19 iii kernel: CPU: 0
> Jan 27 12:53:19 iii kernel: EIP: 0010:[proc_check_root+132/272]
> Tainted: P
> Jan 27 12:53:19 iii kernel: EFLAGS: 00210207
> Jan 27 12:53:19 iii kernel: eax: 0c758b08 ebx: c158d3c0 ecx:
> d9940000 edx: 0c758b08
> Jan 27 12:53:19 iii kernel: esi: c1588b40 edi: d9940000 ebp:
> c158d3c0 esp: cd86defc
> Jan 27 12:53:19 iii kernel: ds: 0018 es: 0018 ss: 0018
> Jan 27 12:53:19 iii kernel: Process ps (pid: 17220, stackpage=cd86d000)
> Jan 27 12:53:19 iii kernel: Stack: cbb102c0 ffffffec cd86dfa4 cbb102c0
> 00000000 c15eac00 0c758b08 c014bf5d
> Jan 27 12:53:19 iii kernel: cbb102c0 c7599f40 c013989f cbb102c0
> 00000001 c013a388 cbb102c0 00000001
> Jan 27 12:53:19 iii kernel: cd86dfa4 cf186000 00000000 00000008
> bffff710 00000008 cf18600f c7599f40
> Jan 27 12:53:19 iii kernel: Call Trace: [proc_permission+29/48]
> [permission+31/48] [link_path_walk+2104/2144] [path_walk+26/32]
> [path_lookup+27/48]
> Jan 27 12:53:19 iii kernel: [__user_walk+38/64] [sys_readlink+48/160]
> [sys_close+67/96] [system_call+51/56]
> Jan 27 12:53:19 iii kernel:
> Jan 27 12:53:19 iii kernel: Code: 8b 50 08 39 d0 74 65 8b 40 0c 89 54 24
> 18 39 da 75 ea 56 50
> Jan 27 12:53:25 iii kernel: scsi : aborting command due to timeout :
> pid 202656, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
> Jan 27 12:53:25 iii kernel: SCSI host 0 abort (pid 202656) timed out -
> resetting
> Jan 27 12:53:25 iii kernel: SCSI bus is being reset for host 0 channel 0.
> Jan 27 12:53:26 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:53:26 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:27 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:53:27 iii kernel: hdc: status timeout: status=0xc0 { Busy }
> Jan 27 12:53:27 iii kernel: hdc: drive not ready for command
> Jan 27 12:53:28 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:37 iii kernel: scsi : aborting command due to timeout : pid
> 202657, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
> Jan 27 12:53:37 iii kernel: SCSI host 0 abort (pid 202657) timed out -
> resetting
> Jan 27 12:53:37 iii kernel: SCSI bus is being reset for host 0 channel 0.
> Jan 27 12:53:38 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:53:38 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:38 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:53:39 iii kernel: hdc: status timeout: status=0xc0 { Busy }
> Jan 27 12:53:39 iii kernel: hdc: drive not ready for command
> Jan 27 12:53:40 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:46 iii kernel: Unable to handle kernel paging request at
> virtual address 00020001
> Jan 27 12:53:46 iii kernel: printing eip:
> Jan 27 12:53:46 iii kernel: c014bcba
> Jan 27 12:53:46 iii kernel: *pde = 00000000
> Jan 27 12:53:46 iii kernel: Oops: 0002
> Jan 27 12:53:46 iii kernel: CPU: 0
> Jan 27 12:53:46 iii kernel: EIP: 0010:[proc_root_link+26/96] Tainted: P
> Jan 27 12:53:46 iii kernel: EFLAGS: 00210202
> Jan 27 12:53:46 iii kernel: eax: d430e000 ebx: fffffffe ecx:
> 00020001 edx: d2901f10
> Jan 27 12:53:46 iii kernel: esi: ffffffec edi: d2901fa4 ebp:
> cbb102c0 esp: d2901ee8
> Jan 27 12:53:46 iii kernel: ds: 0018 es: 0018 ss: 0018
> Jan 27 12:53:46 iii kernel: Process ps (pid: 17221, stackpage=d2901000)
> Jan 27 12:53:46 iii kernel: Stack: cbb102c0 c014be53 cbb102c0 d2901f10
> d2901f14 cbb102c0 ffffffec d2901fa4
> Jan 27 12:53:46 iii kernel: cbb102c0 00000000 d2901fa4 c014bf50
> c014bf5d cbb102c0 c7599f40 c013989f
> Jan 27 12:53:46 iii kernel: cbb102c0 00000001 c013a388 cbb102c0
> 00000001 d2901fa4 d50f0000 00000000
> Jan 27 12:53:46 iii kernel: Call Trace: [proc_check_root+35/272]
> [proc_permission+16/48] [proc_permission+29/48] [permission+31/48]
> [link_path_walk+2104/2144]
> Jan 27 12:53:46 iii kernel: [path_walk+26/32] [path_lookup+27/48]
> [__user_walk+38/64] [sys_readlink+48/160] [sys_close+67/96]
> [system_call+51/56]
> Jan 27 12:53:46 iii kernel:
> Jan 27 12:53:46 iii kernel: Code: ff 01 8b 51 14 85 d2 74 03 ff 42 28 8b
> 44 24 10 89 10 8b 51
> Jan 27 12:53:49 iii kernel: scsi : aborting command due to timeout :
> pid 202658, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
> Jan 27 12:53:50 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:53:50 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:50 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:53:50 iii kernel: hdc: status timeout: status=0xc0 { Busy }
> Jan 27 12:53:50 iii kernel: hdc: drive not ready for command
> Jan 27 12:53:50 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:53:56 iii kernel: Unable to handle kernel paging request at
> virtual address 00020001
> Jan 27 12:53:56 iii kernel: printing eip:
> Jan 27 12:53:56 iii kernel: c014bcba
> Jan 27 12:53:56 iii kernel: *pde = 00000000
> Jan 27 12:53:56 iii kernel: Oops: 0002
> Jan 27 12:53:56 iii kernel: CPU: 0
> Jan 27 12:53:56 iii kernel: EIP: 0010:[proc_root_link+26/96] Tainted: P
> Jan 27 12:53:56 iii kernel: EFLAGS: 00210202
> Jan 27 12:53:56 iii kernel: eax: d430e000 ebx: fffffffe ecx:
> 00020001 edx: d2901f10
> Jan 27 12:53:56 iii kernel: esi: ffffffec edi: d2901fa4 ebp:
> cbb102c0 esp: d2901ee8
> Jan 27 12:53:56 iii kernel: ds: 0018 es: 0018 ss: 0018
> Jan 27 12:53:56 iii kernel: Process ps (pid: 17223, stackpage=d2901000)
> Jan 27 12:53:56 iii kernel: Stack: cbb102c0 c014be53 cbb102c0 d2901f10
> d2901f14 cbb102c0 ffffffec d2901fa4
> Jan 27 12:53:56 iii kernel: cbb102c0 00000000 d2901fa4 c014bf50
> c014bf5d cbb102c0 c7599f40 c013989f
> Jan 27 12:53:56 iii kernel: cbb102c0 00000001 c013a388 cbb102c0
> 00000001 d2901fa4 d7969000 00000000
> Jan 27 12:53:56 iii kernel: Call Trace: [proc_check_root+35/272]
> [proc_permission+16/48] [proc_permission+29/48] [permission+31/48]
> [link_path_walk+2104/2144]
> Jan 27 12:53:56 iii kernel: [path_walk+26/32] [path_lookup+27/48]
> [__user_walk+38/64] [sys_readlink+48/160] [sys_close+67/96]
> [system_call+51/56]
> Jan 27 12:53:56 iii kernel:
> Jan 27 12:53:56 iii kernel: Code: ff 01 8b 51 14 85 d2 74 03 ff 42 28 8b
> 44 24 10 89 10 8b 51
> Jan 27 12:54:00 iii kernel: scsi : aborting command due to timeout :
> pid 202659, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
> Jan 27 12:54:00 iii kernel: SCSI host 0 abort (pid 202659) timed out -
> resetting
> Jan 27 12:54:00 iii kernel: SCSI bus is being reset for host 0 channel 0.
> Jan 27 12:54:00 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:54:00 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:54:02 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
> Jan 27 12:54:02 iii kernel: hdc: status timeout: status=0xc0 { Busy }
> Jan 27 12:54:02 iii kernel: hdc: drive not ready for command
> Jan 27 12:54:02 iii kernel: hdc: ATAPI reset complete
> Jan 27 12:54:12 iii kernel: scsi : aborting command due to timeout : pid
> 202660, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
> Jan 27 12:54:12 iii kernel: SCSI host 0 abort (pid 202660) timed out -
> resetting
>
> ======================================================================
>
> At which point everything freezes, the keyboard LEDs flash and no
> combination of three fingered salutes revives the system.
>
> THis is my first post to the list so I apologize if any of this is
> superfluous.
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
On Wed, 2003-01-29 at 19:58, Andre Hedrick wrote:
> Search recent history, Sony CDRW's are known problems.
Still shouldnt oops later on when it resets
FYI I am running 2.4.20, and the CDRW in question is the master on the
bus it is attached to. I'll be happy to send more logs of the event or
any other info you request. Thanks
Alan Cox wrote:
>On Wed, 2003-01-29 at 19:58, Andre Hedrick wrote:
>
>
>>Search recent history, Sony CDRW's are known problems.
>>
>>
>
>
>Still shouldnt oops later on when it resets
>
>
>
>
On Thu, 2003-01-30 at 21:08, Howard Shane wrote:
> FYI I am running 2.4.20, and the CDRW in question is the master on the
> bus it is attached to. I'll be happy to send more logs of the event or
> any other info you request. Thanks
Im mostly interested to know if the newer IDE code now merged into
2.4.21pre also shows the same problem for you.
On Thu, 30 Jan 2003, Howard Shane wrote:
> FYI I am running 2.4.20, and the CDRW in question is the master on the
> bus it is attached to. I'll be happy to send more logs of the event or
> any other info you request. Thanks
>
Look at yesterday's mail. Somebody posted a fix. It was a definite
"doing something out-of-order" fix.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.18 on an i686 machine (797.90 BogoMips).
Why is the government concerned about the lunatic fringe? Think about it.
After heavy testing of the drive with a 2.4.21-pre kernel I have yet to
be able to reproduce the problem. :^)
Alan Cox wrote:
>On Thu, 2003-01-30 at 21:08, Howard Shane wrote:
>
>
>>FYI I am running 2.4.20, and the CDRW in question is the master on the
>>bus it is attached to. I'll be happy to send more logs of the event or
>>any other info you request. Thanks
>>
>>
>
>Im mostly interested to know if the newer IDE code now merged into
>2.4.21pre also shows the same problem for you.
>
>
>
>