Not relevant to the 650, but for the 630: Going through the datasheet
revealed that the 630 (with built-in Super South Bridge) does not know
register 0x62 (of the "ISA bridge", speak the irq router, 00:01.0,
1039:0008, revision 0) - it's reserved there, but the datasheets states
explicitly that bit 7 should be set to 1.
The USB interrupts and their routing is determined by bit 8 register
0x04 of the USB OHCI configuration space (00:01.2 and 00:01.3).
Perhaps some interrupt guru knows what to do with this information and
is able to verify that the current implementation does this right...
Thomas
--
Thomas Winischhofer
Vienna/Austria
thomas AT winischhofer DOT net *** http://www.winischhofer.net/
twini AT xfree86 DOT org