Linux version 2.5.73-mm1-jd4 (root@ds666) (gcc version 3.3 (Debian)) #1 SMP Wed Jun 25 10:19:39 CEST 2003
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000030000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
768MB LOWMEM available.
On node 0 totalpages: 196608
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 192512 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=Linux ro root=305 mem=nopentium hdc=scsi console=ttyS0,38400n8 console=tty0 acpi=off noapm apm=off
ide_setup: hdc=scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1460.870 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2916.35 BogoMIPS
Memory: 773968k/786432k available (1893k kernel code, 11676k reserved, 731k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbf7 c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: AMD Athlon(tm) XP 1700+ stepping 00
per-CPU timeslice cutoff: 731.54 usecs.
task migration cache decay timeout: 10 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1460.7185 MHz.
..... host bus clock speed is 265.5852 MHz.
Starting migration thread for cpu 0
CPUS done 2
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb590, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 15Kb (60 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030619
ACPI: Disabled via command line (acpi=off)
spurious 8259A interrupt: IRQ7.
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc060
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc090, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
ACPI: ACPI tables contain no PCI IRQ routing entries
swapper R current 1 0 2 (L-TLB)
c012c745 00000000 00000001 00000001 00000000 c03b8088 00000000 c01194f1
00000000 00000578 000026bf c03d27e0 c03c1149 c0109f8a 00000578 f3fb7fde
0000000e 000026bf c03d27e0 c03c1149 f3fb8343 0000007b 0000007b ffffffef
Call Trace:
[<c012c745>] update_process_times+0x45/0x60
[<c01194f1>] smp_apic_timer_interrupt+0x151/0x160
[<c0109f8a>] apic_timer_interrupt+0x1a/0x20
[<c0115464>] delay_tsc+0x14/0x20
[<c01fc282>] __delay+0x12/0x20
[<c0243b73>] serial8250_console_write+0xb3/0x270
[<c0123ece>] __call_console_drivers+0x5e/0x60
[<c0123fcf>] call_console_drivers+0x7f/0x120
[<c0124361>] release_console_sem+0x61/0xf0
[<c0124220>] printk+0x140/0x1e0
[<c03a71a8>] acpi_pci_irq_init+0x16/0x51
[<c03adbb6>] pci_acpi_init+0x26/0x70
[<c0394a1b>] do_initcalls+0x2b/0xa0
[<c013491f>] init_workqueues+0xf/0x24
[<c01050d8>] init+0x58/0x200
[<c0105080>] init+0x0/0x200
[<c0107289>] kernel_thread_helper+0x5/0xc
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
pty: 256 Unix98 ptys configured
Machine check exception polling timer started.
Enabling SEP on CPU 0
Journalled Block Device driver loaded
devfs: v1.22 (20021013) Richard Gooch ([email protected])
devfs: boot_options: 0x1
Initializing Cryptographic API
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Software Watchdog Timer: 0.06, soft_margin: 60 sec, nowayout: 0
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L060AVV207-0, ATA DISK drive
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SONY CD-RW CRX175E2, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-104S 012, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/1821KiB Cache, CHS=7476/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Software Suspend has a malfunctioning SMP support. Disabled :(
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda5) for (hda5)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
Intel(R) PRO/100 Network Driver - version 2.3.13-k1
Copyright (c) 2003 Intel Corporation
PCI: Found IRQ 11 for device 00:09.0
IRQ routing conflict for 00:07.5, have irq 10, want irq 11
PCI: Sharing IRQ 11 with 00:0f.0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled
PCI: Found IRQ 10 for device 00:0a.0
IRQ routing conflict for 00:07.2, have irq 5, want irq 10
IRQ routing conflict for 00:07.3, have irq 5, want irq 10
PCI: Sharing IRQ 10 with 00:0e.0
PCI: Sharing IRQ 10 with 00:0e.1
e100: selftest OK.
e100: eth1: Intel(R) PRO/100 Network Connection
registering 0-6000
PCI: Found IRQ 9 for device 00:0c.0
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
drivers/usb/core/usb.c: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo Pro KT133/KM133/TwisterK chipset
agpgart: Maximum main memory to use for agp memory: 691M
agpgart: AGP aperture is 256M @ 0xc0000000
Linux video capture interface: v1.00
bttv: driver version 0.9.4 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Host bridge is VIA Technologies, In VT8363/8365 [KT133/K
bttv: Host bridge is VIA Technologies, In VT82C686 [Apollo Sup
bttv: Bt8xx card found (0).
PCI: Found IRQ 10 for device 00:0e.0
IRQ routing conflict for 00:07.2, have irq 5, want irq 10
IRQ routing conflict for 00:07.3, have irq 5, want irq 10
PCI: Sharing IRQ 10 with 00:0a.0
PCI: Sharing IRQ 10 with 00:0e.1
bttv0: Bt878 (rev 2) at 00:0e.0, irq: 10, latency: 32, mmio: 0xe3221000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom: model=61324, tuner=Philips FI1216 MK2 (5), radio=no
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... found
msp34xx: init: chip=MSP3410D-B4 +nicam +simple
msp3410: daemon started
registering 1-0040
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
tuner: chip found @ 0xc2
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
registering 1-0061
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda7) for (hda7)
Using r5 hash to sort names
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda6) for (hda6)
Using r5 hash to sort names
e100: eth0 NIC Link is Up 100 Mbps Half duplex
Module lockd cannot be unloaded due to unsafe usage in include/linux/module.h:479