2003-08-12 09:11:04

by Karel Kulhavy

[permalink] [raw]
Subject: Hangup on nforce2 UDMA

Hello

Could you please try if your nforce2 MCP southbridge is also possible
to be crashed the way I describe lower?

I have nforce2 motherboard Soltek SL75FRN2-L with MCP southbridge. Using
2.4.21 with AMD 74xx driver for IDE. If I leave the UDMA5 (UATA-100)
setting BIOS leaves on the IDE disk I can hangup the machine almost
deterministically with

cat /dev/hda > /dev/null

performed just after hard reset and subsequent boot. It hangs after max.
a minute or so. If it doesn't work, try hard reset and again, then
putting this script into /root/crash:

( a=0; while true; do echo $a; a=`/usr/bin/expr $a + 1`; sleep 1; done ) &
cat /dev/hda > /dev/null

then adding this into your lilo.conf:

image=/boot/vmlinuz
label=crash
append="init=/bin/bash /root/crash"
read-only

and finally lilo -D crash and reboot and hard reset. Repeat several
times if the crash doesn't occur on the first try.

keyboard lights don't work, alt-sysrq-b doesn't work, power off doesn't
work. Reset works. I tried NMI watchog but both with nmi_watchdog=1 and
nmi_watchdog=2 I get NMI 14 or 15 in /proc/interrupts and it doesn't
increment in 5 second intervals. Without nmi_watchdog I get NMI 0 in
/proc/interrupts. Enabling NMI watchdog and waiting 5 seconds after the
crash does nothing.

When UDMA is disabled in BIOS, I get lower performance of 17MB/s instead
of 40MB/s. I have also tried IGNORE word93 Validation BITS and AMD Viper
ATA-66 Override and none helped.

Cl<


2003-08-12 15:42:26

by zipa24

[permalink] [raw]
Subject: RE: Hangup on nforce2 UDMA

Heip!

>I have nforce2 motherboard Soltek SL75FRN2-L with MCP southbridge. Using
>2.4.21 with AMD 74xx driver for IDE. If I leave the UDMA5 (UATA-100)
>setting BIOS leaves on the IDE disk I can hangup the machine almost
>deterministically with
>
>cat /dev/hda > /dev/null

I have nForce2 motherboard ASUS A7N8X Deluxe, and I have a similar problem.


>When UDMA is disabled in BIOS, I get lower performance of 17MB/s instead
>of 40MB/s. I have also tried IGNORE word93 Validation BITS and AMD Viper
>ATA-66 Override and none helped.

I could 'fix' the problem by doing "hdparm -qd1qk1qX67 /dev/hd[ab]" in initrc
which reduced the theoretical speed 'only' to 44.4MB/s.


>Cl<

// /

_____________________________________________________________
Kuukausimaksuton nettiyhteys: http://www.suomi24.fi/liittyma/
Yli 12000 logoa ja soitto??nt?: http://sms.suomi24.fi/