Logo has dissapeared after 2.6.0-test1-mm2.
I would have thought test2-mm2 would have patched the problem?
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
On Thursday 31 July 2003 20:57, Ronald Jerome wrote:
>Logo has dissapeared after 2.6.0-test1-mm2.
>
>I would have thought test2-mm2 would have patched the problem?
>
I have a blue bar a couple of inches high with test2-mm2, but I've
never actually seen the logo when booting 2.6. What options trigger
that properly?
--
Cheers, Gene
AMD K6-III@500mhz 320M
Athlon1600XP@1400mhz 512M
99.27% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attornies please note, additions to this message
by Gene Heskett are:
Copyright 2003 by Maurice Eugene Heskett, all rights reserved.
* Gene Heskett <[email protected]>:
> On Thursday 31 July 2003 20:57, Ronald Jerome wrote:
> >Logo has dissapeared after 2.6.0-test1-mm2.
> >
> >I would have thought test2-mm2 would have patched the problem?
> >
> I have a blue bar a couple of inches high with test2-mm2, but I've
> never actually seen the logo when booting 2.6. What options trigger
> that properly?
Same here. I have all the logo options activated, yet I only get a
black bar on top of the screen when booting with a fraembuffer console.
--
Ralf Hildebrandt (Im Auftrag des Referat V a) [email protected]
Charite Campus Mitte Tel. +49 (0)30-450 570-155
Referat V a - Kommunikationsnetze - Fax. +49 (0)30-450 570-916
AIM: ralfpostfix
* Stuart Longland <[email protected]>:
> | Same here. I have all the logo options activated, yet I only get a
> | black bar on top of the screen when booting with a fraembuffer console.
> |
>
> I've had it work on my main machine, which uses the Radeon framebuffer,
> but on my laptop, which uses the VESA framebuffer, I get the same thing.
I use the neofb (see my bugreport about various issues with that beast).
> I might try again later using the NeoMagic framebuffer and see if the
> fault still exists. If it works on the laptop using the neomagic
> framebuffer, that might point to a problem with the VESA driver.
Sounds interesting!
--
Ralf Hildebrandt (Im Auftrag des Referat V a) [email protected]
Charite Campus Mitte Tel. +49 (0)30-450 570-155
Referat V a - Kommunikationsnetze - Fax. +49 (0)30-450 570-916
AIM: ralfpostfix
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Ralf Hildebrandt wrote:
| * Gene Heskett <[email protected]>:
|
|>On Thursday 31 July 2003 20:57, Ronald Jerome wrote:
|>
|>>Logo has dissapeared after 2.6.0-test1-mm2.
|>>
|>>I would have thought test2-mm2 would have patched the problem?
|>>
|>
|>I have a blue bar a couple of inches high with test2-mm2, but I've
|>never actually seen the logo when booting 2.6. What options trigger
|>that properly?
|
|
| Same here. I have all the logo options activated, yet I only get a
| black bar on top of the screen when booting with a fraembuffer console.
|
I've had it work on my main machine, which uses the Radeon framebuffer,
but on my laptop, which uses the VESA framebuffer, I get the same thing.
I might try again later using the NeoMagic framebuffer and see if the
fault still exists. If it works on the laptop using the neomagic
framebuffer, that might point to a problem with the VESA driver.
This is with Linux 2.6.0-test1. (I wasn't aware of the existance of
2.6.0-test2 until I subscribed to this list less than 24 hours ago)
- --
+-------------------------------------------------------------+
| Stuart Longland stuartl at longlandclan.hopto.org |
| Brisbane Mesh Node: 719 http://stuartl.cjb.net/ |
| I haven't lost my mind - it's backed up on a tape somewhere |
| Griffith Student No: Course: Bachelor/IT (Nathan) |
+-------------------------------------------------------------+
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQE/KgZPIGJk7gLSDPcRArkfAJ9uDoKT+PosA/pRRCDD7ZXTa+xG3wCfZl0E
zRlRhA/d182U47UuIHN9ga4=
=YgA3
-----END PGP SIGNATURE-----
On Fri, 2003-08-01 at 02:57, Ronald Jerome wrote:
> Logo has dissapeared after 2.6.0-test1-mm2.
Is the missing of fbdev patch.
at line 328 of drivers/video/cfbimgblt.c change
328 } else if (image->depth == bpp)
to
328 } else if (image->depth <= bpp)
and it will works again.
--
Flameeyes <[email protected]>
On Thursday, 31 July 2003, at 17:57:37 -0700,
Ronald Jerome wrote:
> Logo has dissapeared after 2.6.0-test1-mm2.
>
> I would have thought test2-mm2 would have patched the problem?
>
The cute Tux penguin comes out of its cave each time I boot Linux
kernels 2.5.x+ since I started trying (and using) them. However, our
pretty friend comes sorrounded by a white band its own height, and all
the way to the right of the screen.
This is a box with a nVIDIA GeForce 2 MX based card:
01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2)
And the kernel (now 2.6.0-test2-mm2) is compiled with:
CONFIG_FB=y
CONFIG_FB_VESA=y
CONFIG_FB_RIVA=y
And the kernel is booted without passing it any vga= modes.
Regards,
--
Jose Luis Domingo Lopez
Linux Registered User #189436 Debian Linux Sid (Linux 2.6.0-test2-mm2)