diff -Naur linux.org/drivers/net/e1000/e1000.h linux.e1000.patched/drivers/net/e1000/e1000.h
--- linux.org/drivers/net/e1000/e1000.h Mon Aug 25 13:29:38 2003
+++ linux.e1000.patched/drivers/net/e1000/e1000.h Mon Aug 25 13:29:38 2003
@@ -35,6 +35,7 @@
#include <linux/stddef.h>
#include <linux/config.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/types.h>
#include <asm/byteorder.h>
#include <linux/init.h>
@@ -81,14 +82,6 @@
struct e1000_adapter;
#include "e1000_hw.h"
-
-#if DBG
-#define E1000_DBG(args...) printk(KERN_DEBUG "e1000: " args)
-#else
-#define E1000_DBG(args...)
-#endif
-
-#define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
#define E1000_MAX_INTR 10
diff -Naur linux.org/drivers/net/e1000/e1000_ethtool.c linux.e1000.patched/drivers/net/e1000/e1000_ethtool.c
--- linux.org/drivers/net/e1000/e1000_ethtool.c Mon Aug 25 13:29:38 2003
+++ linux.e1000.patched/drivers/net/e1000/e1000_ethtool.c Mon Aug 25 13:29:38 2003
@@ -1576,6 +1576,20 @@
return 0;
}
#endif
+ case ETHTOOL_GMSGLVL: {
+ struct ethtool_value edata = {ETHTOOL_GMSGLVL};
+ edata.data = netdev->msg_enable;
+ if (copy_to_user(addr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+ }
+ case ETHTOOL_SMSGLVL: {
+ struct ethtool_value edata;
+ if (copy_from_user(&edata, addr, sizeof(edata)))
+ return -EFAULT;
+ netdev->msg_enable = edata.data;
+ return 0;
+ }
default:
return -EOPNOTSUPP;
}
diff -Naur linux.org/drivers/net/e1000/e1000_main.c linux.e1000.patched/drivers/net/e1000/e1000_main.c
--- linux.org/drivers/net/e1000/e1000_main.c Mon Aug 25 13:29:38 2003
+++ linux.e1000.patched/drivers/net/e1000/e1000_main.c Mon Aug 25 13:29:38 2003
@@ -178,9 +178,14 @@
#endif
};
+static int debug = -1;
+#define E1000_DFLT_MSGLVL (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
+
MODULE_AUTHOR("Intel Corporation, <[email protected]>");
MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
MODULE_LICENSE("GPL");
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "e1000 debug level: 0 (quiet) to 15 (verbose)");
/**
* e1000_init_module - Driver Registration Routine
@@ -337,7 +342,8 @@
pci_using_dac = 1;
} else {
if((i = pci_set_dma_mask(pdev, PCI_DMA_32BIT))) {
- E1000_ERR("No usable DMA configuration, aborting\n");
+ dev_err(&pdev->dev,
+ "No usable DMA configuration, aborting\n");
return i;
}
pci_using_dac = 0;
@@ -361,6 +367,15 @@
adapter->pdev = pdev;
adapter->hw.back = adapter;
+ if (debug < 0) {
+ netdev->msg_enable = E1000_DFLT_MSGLVL;
+ } else if (debug >= 8 * sizeof(int)) {
+ /* All levels enabled */
+ netdev->msg_enable = -1;
+ } else {
+ netdev->msg_enable = (1 << debug) - 1;
+ }
+
mmio_start = pci_resource_start(pdev, BAR_0);
mmio_len = pci_resource_len(pdev, BAR_0);
@@ -429,7 +444,7 @@
/* make sure the EEPROM is good */
if(e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
- printk(KERN_ERR "The EEPROM Checksum Is Not Valid\n");
+ netdev_err(netdev,, "The EEPROM Checksum Is Not Valid\n");
goto err_eeprom;
}
@@ -467,8 +482,7 @@
netif_carrier_off(netdev);
netif_stop_queue(netdev);
- printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Connection\n",
- netdev->name);
+ netdev_info(netdev, PROBE, "Intel(R) PRO/1000 Network Connection\n");
e1000_check_options(adapter);
/* Initial Wake on LAN setting
@@ -569,7 +583,7 @@
/* identify the MAC */
if (e1000_set_mac_type(hw)) {
- E1000_ERR("Unknown MAC Type\n");
+ netdev_err(netdev,, "Unknown MAC Type\n");
return -1;
}
@@ -1329,9 +1343,8 @@
&adapter->link_speed,
&adapter->link_duplex);
- printk(KERN_INFO
- "e1000: %s NIC Link is Up %d Mbps %s\n",
- netdev->name, adapter->link_speed,
+ netdev_info(netdev, LINK, "NIC Link is Up %d Mbps %s\n",
+ adapter->link_speed,
adapter->link_duplex == FULL_DUPLEX ?
"Full Duplex" : "Half Duplex");
@@ -1344,9 +1357,7 @@
if(netif_carrier_ok(netdev)) {
adapter->link_speed = 0;
adapter->link_duplex = 0;
- printk(KERN_INFO
- "e1000: %s NIC Link is Down\n",
- netdev->name);
+ netdev_info(netdev, LINK, "NIC Link is Down\n");
netif_carrier_off(netdev);
netif_stop_queue(netdev);
mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
@@ -1758,7 +1769,7 @@
if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
- E1000_ERR("Invalid MTU setting\n");
+ netdev_err(netdev,, "Invalid MTU setting\n");
return -EINVAL;
}
@@ -1766,7 +1777,7 @@
adapter->rx_buffer_len = E1000_RXBUFFER_2048;
} else if(adapter->hw.mac_type < e1000_82543) {
- E1000_ERR("Jumbo Frames not supported on 82542\n");
+ netdev_err(netdev,, "Jumbo Frames not supported on 82542\n");
return -EINVAL;
} else if(max_frame <= E1000_RXBUFFER_4096) {
@@ -2147,7 +2158,8 @@
/* All receives must fit into a single buffer */
- E1000_DBG("Receive packet consumed multiple buffers\n");
+ netdev_dbg(netdev, RX_ERR,
+ "Receive packet consumed multiple buffers\n");
dev_kfree_skb_irq(skb);
rx_desc->status = 0;
diff -Naur linux.org/drivers/net/e1000/e1000_param.c linux.e1000.patched/drivers/net/e1000/e1000_param.c
--- linux.org/drivers/net/e1000/e1000_param.c Mon Aug 25 13:29:38 2003
+++ linux.e1000.patched/drivers/net/e1000/e1000_param.c Mon Aug 25 13:29:38 2003
@@ -244,7 +244,8 @@
};
static int __devinit
-e1000_validate_option(int *value, struct e1000_option *opt)
+e1000_validate_option(int *value, struct e1000_option *opt,
+ struct net_device *netdev)
{
if(*value == OPTION_UNSET) {
*value = opt->def;
@@ -255,16 +256,17 @@
case enable_option:
switch (*value) {
case OPTION_ENABLED:
- printk(KERN_INFO "%s Enabled\n", opt->name);
+ netdev_info(netdev, PROBE, "%s Enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
- printk(KERN_INFO "%s Disabled\n", opt->name);
+ netdev_info(netdev, PROBE, "%s Disabled\n", opt->name);
return 0;
}
break;
case range_option:
if(*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- printk(KERN_INFO "%s set to %i\n", opt->name, *value);
+ netdev_info(netdev, PROBE,
+ "%s set to %i\n", opt->name, *value);
return 0;
}
break;
@@ -276,7 +278,8 @@
ent = &opt->arg.l.p[i];
if(*value == ent->i) {
if(ent->str[0] != '\0')
- printk(KERN_INFO "%s\n", ent->str);
+ netdev_info(netdev, PROBE, "%s\n",
+ ent->str);
return 0;
}
}
@@ -286,8 +289,8 @@
BUG();
}
- printk(KERN_INFO "Invalid %s specified (%i) %s\n",
- opt->name, *value, opt->err);
+ netdev_info(netdev,, "Invalid %s specified (%i) %s\n",
+ opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
@@ -308,11 +311,12 @@
void __devinit
e1000_check_options(struct e1000_adapter *adapter)
{
+ struct net_device *netdev = adapter->netdev;
int bd = adapter->bd_number;
if(bd >= E1000_MAX_NIC) {
- printk(KERN_NOTICE
- "Warning: no configuration for board #%i\n", bd);
- printk(KERN_NOTICE "Using defaults for all values\n");
+ netdev_warn(netdev, PROBE,
+ "Warning: no configuration for board #%i. "
+ "Using defaults for all values\n", bd);
bd = E1000_MAX_NIC;
}
@@ -330,7 +334,7 @@
MAX_TXD : MAX_82544_TXD;
tx_ring->count = TxDescriptors[bd];
- e1000_validate_option(&tx_ring->count, &opt);
+ e1000_validate_option(&tx_ring->count, &opt, netdev);
E1000_ROUNDUP(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
}
{ /* Receive Descriptor Count */
@@ -346,7 +350,7 @@
opt.arg.r.max = mac_type < e1000_82544 ? MAX_RXD : MAX_82544_RXD;
rx_ring->count = RxDescriptors[bd];
- e1000_validate_option(&rx_ring->count, &opt);
+ e1000_validate_option(&rx_ring->count, &opt, netdev);
E1000_ROUNDUP(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
}
{ /* Checksum Offload Enable/Disable */
@@ -358,7 +362,7 @@
};
int rx_csum = XsumRX[bd];
- e1000_validate_option(&rx_csum, &opt);
+ e1000_validate_option(&rx_csum, &opt, netdev);
adapter->rx_csum = rx_csum;
}
{ /* Flow Control */
@@ -380,7 +384,7 @@
};
int fc = FlowControl[bd];
- e1000_validate_option(&fc, &opt);
+ e1000_validate_option(&fc, &opt, netdev);
adapter->hw.fc = adapter->hw.original_fc = fc;
}
{ /* Transmit Interrupt Delay */
@@ -394,7 +398,7 @@
};
adapter->tx_int_delay = TxIntDelay[bd];
- e1000_validate_option(&adapter->tx_int_delay, &opt);
+ e1000_validate_option(&adapter->tx_int_delay, &opt, netdev);
}
{ /* Transmit Absolute Interrupt Delay */
struct e1000_option opt = {
@@ -407,7 +411,7 @@
};
adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
- e1000_validate_option(&adapter->tx_abs_int_delay, &opt);
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt, netdev);
}
{ /* Receive Interrupt Delay */
struct e1000_option opt = {
@@ -420,7 +424,7 @@
};
adapter->rx_int_delay = RxIntDelay[bd];
- e1000_validate_option(&adapter->rx_int_delay, &opt);
+ e1000_validate_option(&adapter->rx_int_delay, &opt, netdev);
}
{ /* Receive Absolute Interrupt Delay */
struct e1000_option opt = {
@@ -433,7 +437,7 @@
};
adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
- e1000_validate_option(&adapter->rx_abs_int_delay, &opt);
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt, netdev);
}
{ /* Interrupt Throttling Rate */
struct e1000_option opt = {
@@ -447,12 +451,12 @@
adapter->itr = InterruptThrottleRate[bd];
if(adapter->itr == 0) {
- printk(KERN_INFO "%s turned off\n", opt.name);
+ netdev_info(netdev, PROBE, "%s turned off\n", opt.name);
} else if(adapter->itr == 1 || adapter->itr == -1) {
/* Dynamic mode */
adapter->itr = 1;
} else {
- e1000_validate_option(&adapter->itr, &opt);
+ e1000_validate_option(&adapter->itr, &opt, netdev);
}
}
@@ -478,20 +482,24 @@
static void __devinit
e1000_check_fiber_options(struct e1000_adapter *adapter)
{
+ struct net_device *netdev = adapter->netdev;
int bd = adapter->bd_number;
bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
if((Speed[bd] != OPTION_UNSET)) {
- printk(KERN_INFO "Speed not valid for fiber adapters, "
- "parameter ignored\n");
+ netdev_info(netdev, PROBE,
+ "Speed not valid for fiber adapters, "
+ "parameter ignored\n");
}
if((Duplex[bd] != OPTION_UNSET)) {
- printk(KERN_INFO "Duplex not valid for fiber adapters, "
- "parameter ignored\n");
+ netdev_info(netdev, PROBE,
+ "Duplex not valid for fiber adapters, "
+ "parameter ignored\n");
}
if((AutoNeg[bd] != OPTION_UNSET)) {
- printk(KERN_INFO "AutoNeg not valid for fiber adapters, "
- "parameter ignored\n");
+ netdev_info(netdev, PROBE,
+ "AutoNeg not valid for fiber adapters, "
+ "parameter ignored\n");
}
}
@@ -505,6 +513,7 @@
static void __devinit
e1000_check_copper_options(struct e1000_adapter *adapter)
{
+ struct net_device *netdev = adapter->netdev;
int speed, dplx;
int bd = adapter->bd_number;
bd = bd > E1000_MAX_NIC ? E1000_MAX_NIC : bd;
@@ -525,7 +534,7 @@
};
speed = Speed[bd];
- e1000_validate_option(&speed, &opt);
+ e1000_validate_option(&speed, &opt, netdev);
}
{ /* Duplex */
struct e1000_opt_list dplx_list[] = {{ 0, "" },
@@ -542,13 +551,13 @@
};
dplx = Duplex[bd];
- e1000_validate_option(&dplx, &opt);
+ e1000_validate_option(&dplx, &opt, netdev);
}
if(AutoNeg[bd] != OPTION_UNSET && (speed != 0 || dplx != 0)) {
- printk(KERN_INFO
- "AutoNeg specified along with Speed or Duplex, "
- "parameter ignored\n");
+ netdev_info(netdev, PROBE,
+ "AutoNeg specified along with Speed or Duplex, "
+ "parameter ignored\n");
adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
} else { /* Autoneg */
struct e1000_opt_list an_list[] =
@@ -595,7 +604,7 @@
};
int an = AutoNeg[bd];
- e1000_validate_option(&an, &opt);
+ e1000_validate_option(&an, &opt, netdev);
adapter->hw.autoneg_advertised = an;
}
@@ -603,78 +612,82 @@
case 0:
adapter->hw.autoneg = 1;
if(Speed[bd] != OPTION_UNSET || Duplex[bd] != OPTION_UNSET)
- printk(KERN_INFO
+ netdev_info(netdev, PROBE,
"Speed and duplex autonegotiation enabled\n");
break;
case HALF_DUPLEX:
- printk(KERN_INFO "Half Duplex specified without Speed\n");
- printk(KERN_INFO "Using Autonegotiation at Half Duplex only\n");
+ netdev_info(netdev, PROBE,
+ "Half Duplex specified without Speed. "
+ "Using Autonegotiation at Half Duplex only\n");
adapter->hw.autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_100_HALF;
break;
case FULL_DUPLEX:
- printk(KERN_INFO "Full Duplex specified without Speed\n");
- printk(KERN_INFO "Using Autonegotiation at Full Duplex only\n");
+ netdev_info(netdev, PROBE,
+ "Full Duplex specified without Speed. "
+ "Using Autonegotiation at Full Duplex only\n");
adapter->hw.autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
ADVERTISE_100_FULL |
ADVERTISE_1000_FULL;
break;
case SPEED_10:
- printk(KERN_INFO "10 Mbps Speed specified without Duplex\n");
- printk(KERN_INFO "Using Autonegotiation at 10 Mbps only\n");
+ netdev_info(netdev, PROBE,
+ "10 Mbps Speed specified without Duplex. "
+ "Using Autonegotiation at 10 Mbps only\n");
adapter->hw.autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
ADVERTISE_10_FULL;
break;
case SPEED_10 + HALF_DUPLEX:
- printk(KERN_INFO "Forcing to 10 Mbps Half Duplex\n");
+ netdev_info(netdev, PROBE, "Forcing to 10 Mbps Half Duplex\n");
adapter->hw.autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_10_half;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_10 + FULL_DUPLEX:
- printk(KERN_INFO "Forcing to 10 Mbps Full Duplex\n");
+ netdev_info(netdev, PROBE, "Forcing to 10 Mbps Full Duplex\n");
adapter->hw.autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_10_full;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_100:
- printk(KERN_INFO "100 Mbps Speed specified without Duplex\n");
- printk(KERN_INFO "Using Autonegotiation at 100 Mbps only\n");
+ netdev_info(netdev, PROBE,
+ "100 Mbps Speed specified without Duplex. "
+ "Using Autonegotiation at 100 Mbps only\n");
adapter->hw.autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
ADVERTISE_100_FULL;
break;
case SPEED_100 + HALF_DUPLEX:
- printk(KERN_INFO "Forcing to 100 Mbps Half Duplex\n");
+ netdev_info(netdev, PROBE, "Forcing to 100 Mbps Half Duplex\n");
adapter->hw.autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_100_half;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_100 + FULL_DUPLEX:
- printk(KERN_INFO "Forcing to 100 Mbps Full Duplex\n");
+ netdev_info(netdev, PROBE, "Forcing to 100 Mbps Full Duplex\n");
adapter->hw.autoneg = 0;
adapter->hw.forced_speed_duplex = e1000_100_full;
adapter->hw.autoneg_advertised = 0;
break;
case SPEED_1000:
- printk(KERN_INFO "1000 Mbps Speed specified without Duplex\n");
- printk(KERN_INFO
- "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
+ netdev_info(netdev, PROBE,
+ "1000 Mbps Speed specified without Duplex. "
+ "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
adapter->hw.autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
break;
case SPEED_1000 + HALF_DUPLEX:
- printk(KERN_INFO "Half Duplex is not supported at 1000 Mbps\n");
- printk(KERN_INFO
- "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
+ netdev_info(netdev, PROBE,
+ "Half Duplex is not supported at 1000 Mbps. "
+ "Using Autonegotiation at 1000 Mbps Full Duplex only\n");
adapter->hw.autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
break;
case SPEED_1000 + FULL_DUPLEX:
- printk(KERN_INFO
+ netdev_info(netdev, PROBE,
"Using Autonegotiation at 1000 Mbps Full Duplex only\n");
adapter->hw.autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
@@ -685,8 +698,9 @@
/* Speed, AutoNeg and MDI/MDI-X must all play nice */
if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
- printk(KERN_INFO "Speed, AutoNeg and MDI-X specifications are "
- "incompatible. Setting MDI-X to a compatible value.\n");
+ netdev_info(netdev, PROBE,
+ "Speed, AutoNeg and MDI-X specifications are "
+ "incompatible. Setting MDI-X to a compatible value.\n");
}
}