In short, I can bring up dev eth2 which is a wireless net card
(orinocco), but if I bring it down, it breaks. I can't do anything with
it anymore; I have to reboot before I can use it again. This didn't
happen in -test4. Once in a while in -test4 and below it did break but
broke differently. Mail me if you want details on it.
orinoco.c 0.13e (David Gibson <[email protected]> and others)
orinoco_cs.c 0.13e (David Gibson <[email protected]> and others)
orinoco_plx.c 0.13e (Daniel Barlow <[email protected]>, David Gibson
<[email protected]>)
eth2: Station identity 001f:0001:0008:000a
eth2: Looks like a Lucent/Agere firmware version 8.10
eth2: Ad-hoc demo mode supported
eth2: IEEE standard IBSS ad-hoc mode supported
eth2: WEP supported, 104-bit key
eth2: MAC address 00:02:2D:5C:18:9F
eth2: Station name "HERMES I"
eth2: ready
eth2: index 0x01: Vcc 3.3, irq 9, io 0x0100-0x013f
eth2: New link status: Connected (0001)
spurious 8259A interrupt: IRQ7.
eth2: New link status: AP Out of Range (0004)
eth2: New link status: AP In Range (0005)