2021-09-18 05:09:22

by Shuah Khan

[permalink] [raw]
Subject: selftests/vm madv_populate.c test

Hi David,

I am running into the following warning when try to build this test:

madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
| ^~~~~~~


I see that the following handling is in place. However there is no
other information to explain why the check is necessary.

#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)

#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */

#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"

I do see these defined in:

include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ 22
include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE 23

Is this the case of missing include from madv_populate.c?

thanks,
-- Shuah


2021-09-18 16:57:57

by David Hildenbrand

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 18.09.21 00:45, Shuah Khan wrote:
> Hi David,
>
> I am running into the following warning when try to build this test:
>
> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
> 334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
> | ^~~~~~~
>
>
> I see that the following handling is in place. However there is no
> other information to explain why the check is necessary.
>
> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>
> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>
> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>
> I do see these defined in:
>
> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ 22
> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE 23
>
> Is this the case of missing include from madv_populate.c?

Hi Shuan,

note that we're including "#include <sys/mman.h>", which in my
understanding maps to the version installed on your system instead
of the one in our build environment.ing.

So as soon as you have a proper kernel + the proper headers installed
and try to build, it would pick up MADV_POPULATE_READ and
MADV_POPULATE_WRITE from the updated headers. That makes sense: you
annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
that doesn't support it.

See vm/userfaultfd.c where we do something similar.


As soon as we have a proper environment, it seems to work just fine:

Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
[root@vm-0 linux]# cat /etc/redhat-release
Fedora release 36 (Rawhide)
[root@vm-0 linux]# cd tools/testing/selftests/vm/
[root@vm-0 vm]# make
make --no-builtin-rules ARCH=x86 -C ../../../.. headers_install
make[1]: Entering directory '/mnt/linux'
INSTALL ./usr/include
make[1]: Leaving directory '/mnt/linux'
gcc -Wall -I ../../../../usr/include -no-pie gup_test.c ../../../../mm/gup_test.h -lrt -lpthread -o /mnt/linux/tools/testing/selftests/vm/gup_test
gcc -Wall -I ../../../../usr/include -no-pie hmm-tests.c local_config.h -lrt -lpthread -o /mnt/linux/tools/testing/selftests/vm/hmm-tests
gcc -Wall -I ../../../../usr/include -no-pie khugepaged.c -lrt -lpthread -o /mnt/linux/tools/testing/selftests/vm/khugepaged
gcc -Wall -I ../../../../usr/include -no-pie madv_populate.c -lrt -lpthread -o /mnt/linux/tools/testing/selftests/vm/madv_populate
...
[root@vm-0 vm]# ./madv_populate
TAP version 13
1..21
# [RUN] test_prot_read
ok 1 MADV_POPULATE_READ with PROT_READ
ok 2 MADV_POPULATE_WRITE with PROT_READ
# [RUN] test_prot_write
ok 3 MADV_POPULATE_READ with PROT_WRITE
ok 4 MADV_POPULATE_WRITE with PROT_WRITE
# [RUN] test_holes
ok 5 MADV_POPULATE_READ with holes in the middle
ok 6 MADV_POPULATE_WRITE with holes in the middle
ok 7 MADV_POPULATE_READ with holes at the end
ok 8 MADV_POPULATE_WRITE with holes at the end
ok 9 MADV_POPULATE_READ with holes at the beginning
ok 10 MADV_POPULATE_WRITE with holes at the beginning
# [RUN] test_populate_read
ok 11 range initially not populated
ok 12 MADV_POPULATE_READ
ok 13 range is populated
# [RUN] test_populate_write
ok 14 range initially not populated
ok 15 MADV_POPULATE_WRITE
ok 16 range is populated
# [RUN] test_softdirty
ok 17 range is not softdirty
ok 18 MADV_POPULATE_READ
ok 19 range is not softdirty
ok 20 MADV_POPULATE_WRITE
ok 21 range is softdirty
# Totals: pass:21 fail:0 xfail:0 xpass:0 skip:0 error:0


Note: I can see that we are generating an /usr/include, but
I think <sys/mman.h> will default to the installed system headers.

--
Thanks,

David / dhildenb

2021-10-16 22:17:58

by Shuah Khan

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 9/18/21 1:41 AM, David Hildenbrand wrote:
> On 18.09.21 00:45, Shuah Khan wrote:
>> Hi David,
>>
>> I am running into the following warning when try to build this test:
>>
>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>         |  ^~~~~~~
>>
>>
>> I see that the following handling is in place. However there is no
>> other information to explain why the check is necessary.
>>
>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>
>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>
>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>
>> I do see these defined in:
>>
>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>
>> Is this the case of missing include from madv_populate.c?
>
> Hi Shuan,
>
> note that we're including "#include <sys/mman.h>", which in my
> understanding maps to the version installed on your system instead
> of the one in our build environment.ing.
>
> So as soon as you have a proper kernel + the proper headers installed
> and try to build, it would pick up MADV_POPULATE_READ and
> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
> that doesn't support it.
>
> See vm/userfaultfd.c where we do something similar.
>

Kselftest is for testing the kernel with kernel headers. That is the
reason why there is the dependency on header install.

>
> As soon as we have a proper environment, it seems to work just fine:
>
> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
> [root@vm-0 linux]# cat /etc/redhat-release
> Fedora release 36 (Rawhide)

This is a distro release. We don't want to have dependency on headers
from the distro to run selftests. Hope this makes sense.

I still see this on my test system running Linux 5.15-rc5.

Can we make this work with kernel headers?

thanks,
-- Shuah

2021-10-16 22:48:26

by David Hildenbrand

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 15.10.21 17:45, Shuah Khan wrote:
> On 9/18/21 1:41 AM, David Hildenbrand wrote:
>> On 18.09.21 00:45, Shuah Khan wrote:
>>> Hi David,
>>>
>>> I am running into the following warning when try to build this test:
>>>
>>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>         |  ^~~~~~~
>>>
>>>
>>> I see that the following handling is in place. However there is no
>>> other information to explain why the check is necessary.
>>>
>>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>
>>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>
>>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>
>>> I do see these defined in:
>>>
>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>>
>>> Is this the case of missing include from madv_populate.c?
>>
>> Hi Shuan,
>>
>> note that we're including "#include <sys/mman.h>", which in my
>> understanding maps to the version installed on your system instead
>> of the one in our build environment.ing.
>>
>> So as soon as you have a proper kernel + the proper headers installed
>> and try to build, it would pick up MADV_POPULATE_READ and
>> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
>> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
>> that doesn't support it.
>>
>> See vm/userfaultfd.c where we do something similar.
>>
>
> Kselftest is for testing the kernel with kernel headers. That is the
> reason why there is the dependency on header install.
>
>>
>> As soon as we have a proper environment, it seems to work just fine:
>>
>> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>> [root@vm-0 linux]# cat /etc/redhat-release
>> Fedora release 36 (Rawhide)
>
> This is a distro release. We don't want to have dependency on headers
> from the distro to run selftests. Hope this makes sense.
>
> I still see this on my test system running Linux 5.15-rc5.

Did you also install Linux headers? I assume no, correct?

--
Thanks,

David / dhildenb

2021-10-16 23:33:42

by David Hildenbrand

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 15.10.21 17:47, David Hildenbrand wrote:
> On 15.10.21 17:45, Shuah Khan wrote:
>> On 9/18/21 1:41 AM, David Hildenbrand wrote:
>>> On 18.09.21 00:45, Shuah Khan wrote:
>>>> Hi David,
>>>>
>>>> I am running into the following warning when try to build this test:
>>>>
>>>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>         |  ^~~~~~~
>>>>
>>>>
>>>> I see that the following handling is in place. However there is no
>>>> other information to explain why the check is necessary.
>>>>
>>>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>
>>>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>
>>>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>
>>>> I do see these defined in:
>>>>
>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>>>
>>>> Is this the case of missing include from madv_populate.c?
>>>
>>> Hi Shuan,
>>>
>>> note that we're including "#include <sys/mman.h>", which in my
>>> understanding maps to the version installed on your system instead
>>> of the one in our build environment.ing.
>>>
>>> So as soon as you have a proper kernel + the proper headers installed
>>> and try to build, it would pick up MADV_POPULATE_READ and
>>> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
>>> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
>>> that doesn't support it.
>>>
>>> See vm/userfaultfd.c where we do something similar.
>>>
>>
>> Kselftest is for testing the kernel with kernel headers. That is the
>> reason why there is the dependency on header install.
>>
>>>
>>> As soon as we have a proper environment, it seems to work just fine:
>>>
>>> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>>> [root@vm-0 linux]# cat /etc/redhat-release
>>> Fedora release 36 (Rawhide)
>>
>> This is a distro release. We don't want to have dependency on headers
>> from the distro to run selftests. Hope this makes sense.
>>
>> I still see this on my test system running Linux 5.15-rc5.
>
> Did you also install Linux headers? I assume no, correct?
>

What happens in your environment when compiling and running the
memfd_secret test?

If assume you'll see a "skip" when executing, because it might also
refer to the local version of linux headers and although it builds, it
really cannot build something "functional". It just doesn't add a
"#warning" to make that obvious.

--
Thanks,

David / dhildenb

2021-10-17 01:40:13

by David Hildenbrand

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 15.10.21 18:06, David Hildenbrand wrote:
> On 15.10.21 17:47, David Hildenbrand wrote:
>> On 15.10.21 17:45, Shuah Khan wrote:
>>> On 9/18/21 1:41 AM, David Hildenbrand wrote:
>>>> On 18.09.21 00:45, Shuah Khan wrote:
>>>>> Hi David,
>>>>>
>>>>> I am running into the following warning when try to build this test:
>>>>>
>>>>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>>>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>         |  ^~~~~~~
>>>>>
>>>>>
>>>>> I see that the following handling is in place. However there is no
>>>>> other information to explain why the check is necessary.
>>>>>
>>>>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>>
>>>>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>>
>>>>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>
>>>>> I do see these defined in:
>>>>>
>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>>>>
>>>>> Is this the case of missing include from madv_populate.c?
>>>>
>>>> Hi Shuan,
>>>>
>>>> note that we're including "#include <sys/mman.h>", which in my
>>>> understanding maps to the version installed on your system instead
>>>> of the one in our build environment.ing.
>>>>
>>>> So as soon as you have a proper kernel + the proper headers installed
>>>> and try to build, it would pick up MADV_POPULATE_READ and
>>>> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
>>>> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
>>>> that doesn't support it.
>>>>
>>>> See vm/userfaultfd.c where we do something similar.
>>>>
>>>
>>> Kselftest is for testing the kernel with kernel headers. That is the
>>> reason why there is the dependency on header install.
>>>
>>>>
>>>> As soon as we have a proper environment, it seems to work just fine:
>>>>
>>>> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>>>> [root@vm-0 linux]# cat /etc/redhat-release
>>>> Fedora release 36 (Rawhide)
>>>
>>> This is a distro release. We don't want to have dependency on headers
>>> from the distro to run selftests. Hope this makes sense.
>>>
>>> I still see this on my test system running Linux 5.15-rc5.
>>
>> Did you also install Linux headers? I assume no, correct?
>>
>
> What happens in your environment when compiling and running the
> memfd_secret test?
>
> If assume you'll see a "skip" when executing, because it might also
> refer to the local version of linux headers and although it builds, it
> really cannot build something "functional". It just doesn't add a
> "#warning" to make that obvious.
>

The following works but looks extremely hackish.

diff --git a/tools/testing/selftests/vm/madv_populate.c
b/tools/testing/selftests/vm/madv_populate.c
index b959e4ebdad4..ab26163db540 100644
--- a/tools/testing/selftests/vm/madv_populate.c
+++ b/tools/testing/selftests/vm/madv_populate.c
@@ -14,12 +14,11 @@
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
+#include "../../../../usr/include/linux/mman.h"
#include <sys/mman.h>

#include "../kselftest.h"

-#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
-
/*
* For now, we're using 2 MiB of private anonymous memory for all tests.
*/
@@ -328,15 +327,3 @@ int main(int argc, char **argv)
err, ksft_test_num());
return ksft_exit_pass();
}
-
-#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
-
-#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
-
-int main(int argc, char **argv)
-{
- ksft_print_header();
- ksft_exit_skip("MADV_POPULATE_READ or MADV_POPULATE_WRITE not
defined\n");
-}
-
-#endif /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */


There has to be some clean way to achieve the same.

--
Thanks,

David / dhildenb

2021-10-17 01:40:37

by David Hildenbrand

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 15.10.21 18:15, David Hildenbrand wrote:
> On 15.10.21 18:06, David Hildenbrand wrote:
>> On 15.10.21 17:47, David Hildenbrand wrote:
>>> On 15.10.21 17:45, Shuah Khan wrote:
>>>> On 9/18/21 1:41 AM, David Hildenbrand wrote:
>>>>> On 18.09.21 00:45, Shuah Khan wrote:
>>>>>> Hi David,
>>>>>>
>>>>>> I am running into the following warning when try to build this test:
>>>>>>
>>>>>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>>>>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>         |  ^~~~~~~
>>>>>>
>>>>>>
>>>>>> I see that the following handling is in place. However there is no
>>>>>> other information to explain why the check is necessary.
>>>>>>
>>>>>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>>>
>>>>>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>>>
>>>>>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>
>>>>>> I do see these defined in:
>>>>>>
>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>>>>>
>>>>>> Is this the case of missing include from madv_populate.c?
>>>>>
>>>>> Hi Shuan,
>>>>>
>>>>> note that we're including "#include <sys/mman.h>", which in my
>>>>> understanding maps to the version installed on your system instead
>>>>> of the one in our build environment.ing.
>>>>>
>>>>> So as soon as you have a proper kernel + the proper headers installed
>>>>> and try to build, it would pick up MADV_POPULATE_READ and
>>>>> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
>>>>> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
>>>>> that doesn't support it.
>>>>>
>>>>> See vm/userfaultfd.c where we do something similar.
>>>>>
>>>>
>>>> Kselftest is for testing the kernel with kernel headers. That is the
>>>> reason why there is the dependency on header install.
>>>>
>>>>>
>>>>> As soon as we have a proper environment, it seems to work just fine:
>>>>>
>>>>> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>>>>> [root@vm-0 linux]# cat /etc/redhat-release
>>>>> Fedora release 36 (Rawhide)
>>>>
>>>> This is a distro release. We don't want to have dependency on headers
>>>> from the distro to run selftests. Hope this makes sense.
>>>>
>>>> I still see this on my test system running Linux 5.15-rc5.
>>>
>>> Did you also install Linux headers? I assume no, correct?
>>>
>>
>> What happens in your environment when compiling and running the
>> memfd_secret test?
>>
>> If assume you'll see a "skip" when executing, because it might also
>> refer to the local version of linux headers and although it builds, it
>> really cannot build something "functional". It just doesn't add a
>> "#warning" to make that obvious.
>>
>
> The following works but looks extremely hackish.
>
> diff --git a/tools/testing/selftests/vm/madv_populate.c
> b/tools/testing/selftests/vm/madv_populate.c
> index b959e4ebdad4..ab26163db540 100644
> --- a/tools/testing/selftests/vm/madv_populate.c
> +++ b/tools/testing/selftests/vm/madv_populate.c
> @@ -14,12 +14,11 @@
> #include <unistd.h>
> #include <errno.h>
> #include <fcntl.h>
> +#include "../../../../usr/include/linux/mman.h"
> #include <sys/mman.h>
>
> #include "../kselftest.h"
>
> -#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
> -
> /*
> * For now, we're using 2 MiB of private anonymous memory for all tests.
> */
> @@ -328,15 +327,3 @@ int main(int argc, char **argv)
> err, ksft_test_num());
> return ksft_exit_pass();
> }
> -
> -#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
> -
> -#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
> -
> -int main(int argc, char **argv)
> -{
> - ksft_print_header();
> - ksft_exit_skip("MADV_POPULATE_READ or MADV_POPULATE_WRITE not
> defined\n");
> -}
> -
> -#endif /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>
>
> There has to be some clean way to achieve the same.
>

Sorry for the spam,

diff --git a/tools/testing/selftests/vm/Makefile
b/tools/testing/selftests/vm/Makefile
index d9605bd10f2d..ce198b329ff5 100644
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -23,7 +23,7 @@ MACHINE ?= $(shell echo $(uname_M) | sed -e
's/aarch64.*/arm64/' -e 's/ppc64.*/p
# LDLIBS.
MAKEFLAGS += --no-builtin-rules

-CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
+CFLAGS = -Wall -idirafter ../../../../usr/include $(EXTRA_CFLAGS)
LDLIBS = -lrt -lpthread
TEST_GEN_FILES = compaction_test
TEST_GEN_FILES += gup_test


Seems to set the right include path priority.


--
Thanks,

David / dhildenb

2021-10-17 01:54:39

by Shuah Khan

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 10/15/21 9:47 AM, David Hildenbrand wrote:
> On 15.10.21 17:45, Shuah Khan wrote:
>> On 9/18/21 1:41 AM, David Hildenbrand wrote:
>>> On 18.09.21 00:45, Shuah Khan wrote:
>>>> Hi David,
>>>>
>>>> I am running into the following warning when try to build this test:
>>>>
>>>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>         |  ^~~~~~~
>>>>
>>>>
>>>> I see that the following handling is in place. However there is no
>>>> other information to explain why the check is necessary.
>>>>
>>>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>
>>>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>
>>>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>
>>>> I do see these defined in:
>>>>
>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>>>
>>>> Is this the case of missing include from madv_populate.c?
>>>
>>> Hi Shuan,
>>>
>>> note that we're including "#include <sys/mman.h>", which in my
>>> understanding maps to the version installed on your system instead
>>> of the one in our build environment.ing.
>>>
>>> So as soon as you have a proper kernel + the proper headers installed
>>> and try to build, it would pick up MADV_POPULATE_READ and
>>> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
>>> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
>>> that doesn't support it.
>>>
>>> See vm/userfaultfd.c where we do something similar.
>>>
>>
>> Kselftest is for testing the kernel with kernel headers. That is the
>> reason why there is the dependency on header install.
>>
>>>
>>> As soon as we have a proper environment, it seems to work just fine:
>>>
>>> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>>> [root@vm-0 linux]# cat /etc/redhat-release
>>> Fedora release 36 (Rawhide)
>>
>> This is a distro release. We don't want to have dependency on headers
>> from the distro to run selftests. Hope this makes sense.
>>
>> I still see this on my test system running Linux 5.15-rc5.
>
> Did you also install Linux headers? I assume no, correct?
>

I don't install it on my test system. Kselftest build does header install
in the source tree to compile tests with the headers so that the changes
to tests and new tests can be compiled with the kernel changes that might
include kernel header changes.

when I run "make kselftest-all TARGETS=vm", I see the following: (this
is on linux-next-20211012,

tools/testing/selftests/vm/madv_populate
madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
| ^~~~~~~

thanks,
-- Shuah

2021-10-17 02:39:07

by Shuah Khan

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 10/15/21 10:19 AM, David Hildenbrand wrote:
> On 15.10.21 18:15, David Hildenbrand wrote:
>> On 15.10.21 18:06, David Hildenbrand wrote:
>>> On 15.10.21 17:47, David Hildenbrand wrote:
>>>> On 15.10.21 17:45, Shuah Khan wrote:
>>>>> On 9/18/21 1:41 AM, David Hildenbrand wrote:
>>>>>> On 18.09.21 00:45, Shuah Khan wrote:
>>>>>>> Hi David,
>>>>>>>
>>>>>>> I am running into the following warning when try to build this test:
>>>>>>>
>>>>>>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>>>>>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>>         |  ^~~~~~~
>>>>>>>
>>>>>>>
>>>>>>> I see that the following handling is in place. However there is no
>>>>>>> other information to explain why the check is necessary.
>>>>>>>
>>>>>>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>>>>
>>>>>>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>>>>
>>>>>>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>>
>>>>>>> I do see these defined in:
>>>>>>>
>>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>>>>>>
>>>>>>> Is this the case of missing include from madv_populate.c?
>>>>>>
>>>>>> Hi Shuan,
>>>>>>
>>>>>> note that we're including "#include <sys/mman.h>", which in my
>>>>>> understanding maps to the version installed on your system instead
>>>>>> of the one in our build environment.ing.
>>>>>>
>>>>>> So as soon as you have a proper kernel + the proper headers installed
>>>>>> and try to build, it would pick up MADV_POPULATE_READ and
>>>>>> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
>>>>>> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
>>>>>> that doesn't support it.
>>>>>>
>>>>>> See vm/userfaultfd.c where we do something similar.
>>>>>>
>>>>>
>>>>> Kselftest is for testing the kernel with kernel headers. That is the
>>>>> reason why there is the dependency on header install.
>>>>>
>>>>>>
>>>>>> As soon as we have a proper environment, it seems to work just fine:
>>>>>>
>>>>>> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>>>>>> [root@vm-0 linux]# cat /etc/redhat-release
>>>>>> Fedora release 36 (Rawhide)
>>>>>
>>>>> This is a distro release. We don't want to have dependency on headers
>>>>> from the distro to run selftests. Hope this makes sense.
>>>>>
>>>>> I still see this on my test system running Linux 5.15-rc5.
>>>>
>>>> Did you also install Linux headers? I assume no, correct?
>>>>
>>>
>>> What happens in your environment when compiling and running the
>>> memfd_secret test?
>>>
>>> If assume you'll see a "skip" when executing, because it might also
>>> refer to the local version of linux headers and although it builds, it
>>> really cannot build something "functional". It just doesn't add a
>>> "#warning" to make that obvious.
>>>
>>
>> The following works but looks extremely hackish.
>>
>> diff --git a/tools/testing/selftests/vm/madv_populate.c
>> b/tools/testing/selftests/vm/madv_populate.c
>> index b959e4ebdad4..ab26163db540 100644
>> --- a/tools/testing/selftests/vm/madv_populate.c
>> +++ b/tools/testing/selftests/vm/madv_populate.c
>> @@ -14,12 +14,11 @@
>> #include <unistd.h>
>> #include <errno.h>
>> #include <fcntl.h>
>> +#include "../../../../usr/include/linux/mman.h"
>> #include <sys/mman.h>
>>
>> #include "../kselftest.h"
>>
>> -#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>> -
>> /*
>> * For now, we're using 2 MiB of private anonymous memory for all tests.
>> */
>> @@ -328,15 +327,3 @@ int main(int argc, char **argv)
>> err, ksft_test_num());
>> return ksft_exit_pass();
>> }
>> -
>> -#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>> -
>> -#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>> -
>> -int main(int argc, char **argv)
>> -{
>> - ksft_print_header();
>> - ksft_exit_skip("MADV_POPULATE_READ or MADV_POPULATE_WRITE not
>> defined\n");
>> -}
>> -
>> -#endif /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>
>>
>> There has to be some clean way to achieve the same.
>>
>
> Sorry for the spam,
>
> diff --git a/tools/testing/selftests/vm/Makefile
> b/tools/testing/selftests/vm/Makefile
> index d9605bd10f2d..ce198b329ff5 100644
> --- a/tools/testing/selftests/vm/Makefile
> +++ b/tools/testing/selftests/vm/Makefile
> @@ -23,7 +23,7 @@ MACHINE ?= $(shell echo $(uname_M) | sed -e
> 's/aarch64.*/arm64/' -e 's/ppc64.*/p
> # LDLIBS.
> MAKEFLAGS += --no-builtin-rules
>
> -CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
> +CFLAGS = -Wall -idirafter ../../../../usr/include $(EXTRA_CFLAGS)
> LDLIBS = -lrt -lpthread
> TEST_GEN_FILES = compaction_test
> TEST_GEN_FILES += gup_test
>
>
> Seems to set the right include path priority.
>
>

Yes. It works on linux-next-20211012

Do you mind sending a me patch for this?

thanks,
-- Shuah

2021-10-17 02:44:32

by David Hildenbrand

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 15.10.21 18:25, Shuah Khan wrote:
> On 10/15/21 10:19 AM, David Hildenbrand wrote:
>> On 15.10.21 18:15, David Hildenbrand wrote:
>>> On 15.10.21 18:06, David Hildenbrand wrote:
>>>> On 15.10.21 17:47, David Hildenbrand wrote:
>>>>> On 15.10.21 17:45, Shuah Khan wrote:
>>>>>> On 9/18/21 1:41 AM, David Hildenbrand wrote:
>>>>>>> On 18.09.21 00:45, Shuah Khan wrote:
>>>>>>>> Hi David,
>>>>>>>>
>>>>>>>> I am running into the following warning when try to build this test:
>>>>>>>>
>>>>>>>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>>>>>>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>>>         |  ^~~~~~~
>>>>>>>>
>>>>>>>>
>>>>>>>> I see that the following handling is in place. However there is no
>>>>>>>> other information to explain why the check is necessary.
>>>>>>>>
>>>>>>>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>>>>>
>>>>>>>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>>>>>
>>>>>>>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>>>
>>>>>>>> I do see these defined in:
>>>>>>>>
>>>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>>>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>>>>>>>
>>>>>>>> Is this the case of missing include from madv_populate.c?
>>>>>>>
>>>>>>> Hi Shuan,
>>>>>>>
>>>>>>> note that we're including "#include <sys/mman.h>", which in my
>>>>>>> understanding maps to the version installed on your system instead
>>>>>>> of the one in our build environment.ing.
>>>>>>>
>>>>>>> So as soon as you have a proper kernel + the proper headers installed
>>>>>>> and try to build, it would pick up MADV_POPULATE_READ and
>>>>>>> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
>>>>>>> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
>>>>>>> that doesn't support it.
>>>>>>>
>>>>>>> See vm/userfaultfd.c where we do something similar.
>>>>>>>
>>>>>>
>>>>>> Kselftest is for testing the kernel with kernel headers. That is the
>>>>>> reason why there is the dependency on header install.
>>>>>>
>>>>>>>
>>>>>>> As soon as we have a proper environment, it seems to work just fine:
>>>>>>>
>>>>>>> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>>>>>>> [root@vm-0 linux]# cat /etc/redhat-release
>>>>>>> Fedora release 36 (Rawhide)
>>>>>>
>>>>>> This is a distro release. We don't want to have dependency on headers
>>>>>> from the distro to run selftests. Hope this makes sense.
>>>>>>
>>>>>> I still see this on my test system running Linux 5.15-rc5.
>>>>>
>>>>> Did you also install Linux headers? I assume no, correct?
>>>>>
>>>>
>>>> What happens in your environment when compiling and running the
>>>> memfd_secret test?
>>>>
>>>> If assume you'll see a "skip" when executing, because it might also
>>>> refer to the local version of linux headers and although it builds, it
>>>> really cannot build something "functional". It just doesn't add a
>>>> "#warning" to make that obvious.
>>>>
>>>
>>> The following works but looks extremely hackish.
>>>
>>> diff --git a/tools/testing/selftests/vm/madv_populate.c
>>> b/tools/testing/selftests/vm/madv_populate.c
>>> index b959e4ebdad4..ab26163db540 100644
>>> --- a/tools/testing/selftests/vm/madv_populate.c
>>> +++ b/tools/testing/selftests/vm/madv_populate.c
>>> @@ -14,12 +14,11 @@
>>> #include <unistd.h>
>>> #include <errno.h>
>>> #include <fcntl.h>
>>> +#include "../../../../usr/include/linux/mman.h"
>>> #include <sys/mman.h>
>>>
>>> #include "../kselftest.h"
>>>
>>> -#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>> -
>>> /*
>>> * For now, we're using 2 MiB of private anonymous memory for all tests.
>>> */
>>> @@ -328,15 +327,3 @@ int main(int argc, char **argv)
>>> err, ksft_test_num());
>>> return ksft_exit_pass();
>>> }
>>> -
>>> -#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>> -
>>> -#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>> -
>>> -int main(int argc, char **argv)
>>> -{
>>> - ksft_print_header();
>>> - ksft_exit_skip("MADV_POPULATE_READ or MADV_POPULATE_WRITE not
>>> defined\n");
>>> -}
>>> -
>>> -#endif /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>
>>>
>>> There has to be some clean way to achieve the same.
>>>
>>
>> Sorry for the spam,
>>
>> diff --git a/tools/testing/selftests/vm/Makefile
>> b/tools/testing/selftests/vm/Makefile
>> index d9605bd10f2d..ce198b329ff5 100644
>> --- a/tools/testing/selftests/vm/Makefile
>> +++ b/tools/testing/selftests/vm/Makefile
>> @@ -23,7 +23,7 @@ MACHINE ?= $(shell echo $(uname_M) | sed -e
>> 's/aarch64.*/arm64/' -e 's/ppc64.*/p
>> # LDLIBS.
>> MAKEFLAGS += --no-builtin-rules
>>
>> -CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
>> +CFLAGS = -Wall -idirafter ../../../../usr/include $(EXTRA_CFLAGS)
>> LDLIBS = -lrt -lpthread
>> TEST_GEN_FILES = compaction_test
>> TEST_GEN_FILES += gup_test
>>
>>
>> Seems to set the right include path priority.
>>
>>
>
> Yes. It works on linux-next-20211012
>
> Do you mind sending a me patch for this?

I just double-checked (after make clean) and there is still something
wrong :( the only think that seems to work is the

+#include "../../../../usr/include/linux/mman.h"
#include <sys/mman.h>

hack.

Using "-nostdinc" won't work because we need other headers :(

--
Thanks,

David / dhildenb

2021-10-17 03:59:19

by David Hildenbrand

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 15.10.21 18:28, David Hildenbrand wrote:
> On 15.10.21 18:25, Shuah Khan wrote:
>> On 10/15/21 10:19 AM, David Hildenbrand wrote:
>>> On 15.10.21 18:15, David Hildenbrand wrote:
>>>> On 15.10.21 18:06, David Hildenbrand wrote:
>>>>> On 15.10.21 17:47, David Hildenbrand wrote:
>>>>>> On 15.10.21 17:45, Shuah Khan wrote:
>>>>>>> On 9/18/21 1:41 AM, David Hildenbrand wrote:
>>>>>>>> On 18.09.21 00:45, Shuah Khan wrote:
>>>>>>>>> Hi David,
>>>>>>>>>
>>>>>>>>> I am running into the following warning when try to build this test:
>>>>>>>>>
>>>>>>>>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>>>>>>>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>>>>         |  ^~~~~~~
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I see that the following handling is in place. However there is no
>>>>>>>>> other information to explain why the check is necessary.
>>>>>>>>>
>>>>>>>>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>>>>>>
>>>>>>>>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>>>>>>
>>>>>>>>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>>>>
>>>>>>>>> I do see these defined in:
>>>>>>>>>
>>>>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>>>>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>>>>>>>>
>>>>>>>>> Is this the case of missing include from madv_populate.c?
>>>>>>>>
>>>>>>>> Hi Shuan,
>>>>>>>>
>>>>>>>> note that we're including "#include <sys/mman.h>", which in my
>>>>>>>> understanding maps to the version installed on your system instead
>>>>>>>> of the one in our build environment.ing.
>>>>>>>>
>>>>>>>> So as soon as you have a proper kernel + the proper headers installed
>>>>>>>> and try to build, it would pick up MADV_POPULATE_READ and
>>>>>>>> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
>>>>>>>> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
>>>>>>>> that doesn't support it.
>>>>>>>>
>>>>>>>> See vm/userfaultfd.c where we do something similar.
>>>>>>>>
>>>>>>>
>>>>>>> Kselftest is for testing the kernel with kernel headers. That is the
>>>>>>> reason why there is the dependency on header install.
>>>>>>>
>>>>>>>>
>>>>>>>> As soon as we have a proper environment, it seems to work just fine:
>>>>>>>>
>>>>>>>> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>>>>>>>> [root@vm-0 linux]# cat /etc/redhat-release
>>>>>>>> Fedora release 36 (Rawhide)
>>>>>>>
>>>>>>> This is a distro release. We don't want to have dependency on headers
>>>>>>> from the distro to run selftests. Hope this makes sense.
>>>>>>>
>>>>>>> I still see this on my test system running Linux 5.15-rc5.
>>>>>>
>>>>>> Did you also install Linux headers? I assume no, correct?
>>>>>>
>>>>>
>>>>> What happens in your environment when compiling and running the
>>>>> memfd_secret test?
>>>>>
>>>>> If assume you'll see a "skip" when executing, because it might also
>>>>> refer to the local version of linux headers and although it builds, it
>>>>> really cannot build something "functional". It just doesn't add a
>>>>> "#warning" to make that obvious.
>>>>>
>>>>
>>>> The following works but looks extremely hackish.
>>>>
>>>> diff --git a/tools/testing/selftests/vm/madv_populate.c
>>>> b/tools/testing/selftests/vm/madv_populate.c
>>>> index b959e4ebdad4..ab26163db540 100644
>>>> --- a/tools/testing/selftests/vm/madv_populate.c
>>>> +++ b/tools/testing/selftests/vm/madv_populate.c
>>>> @@ -14,12 +14,11 @@
>>>> #include <unistd.h>
>>>> #include <errno.h>
>>>> #include <fcntl.h>
>>>> +#include "../../../../usr/include/linux/mman.h"
>>>> #include <sys/mman.h>
>>>>
>>>> #include "../kselftest.h"
>>>>
>>>> -#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>> -
>>>> /*
>>>> * For now, we're using 2 MiB of private anonymous memory for all tests.
>>>> */
>>>> @@ -328,15 +327,3 @@ int main(int argc, char **argv)
>>>> err, ksft_test_num());
>>>> return ksft_exit_pass();
>>>> }
>>>> -
>>>> -#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>> -
>>>> -#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>> -
>>>> -int main(int argc, char **argv)
>>>> -{
>>>> - ksft_print_header();
>>>> - ksft_exit_skip("MADV_POPULATE_READ or MADV_POPULATE_WRITE not
>>>> defined\n");
>>>> -}
>>>> -
>>>> -#endif /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>
>>>>
>>>> There has to be some clean way to achieve the same.
>>>>
>>>
>>> Sorry for the spam,
>>>
>>> diff --git a/tools/testing/selftests/vm/Makefile
>>> b/tools/testing/selftests/vm/Makefile
>>> index d9605bd10f2d..ce198b329ff5 100644
>>> --- a/tools/testing/selftests/vm/Makefile
>>> +++ b/tools/testing/selftests/vm/Makefile
>>> @@ -23,7 +23,7 @@ MACHINE ?= $(shell echo $(uname_M) | sed -e
>>> 's/aarch64.*/arm64/' -e 's/ppc64.*/p
>>> # LDLIBS.
>>> MAKEFLAGS += --no-builtin-rules
>>>
>>> -CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
>>> +CFLAGS = -Wall -idirafter ../../../../usr/include $(EXTRA_CFLAGS)
>>> LDLIBS = -lrt -lpthread
>>> TEST_GEN_FILES = compaction_test
>>> TEST_GEN_FILES += gup_test
>>>
>>>
>>> Seems to set the right include path priority.
>>>
>>>
>>
>> Yes. It works on linux-next-20211012
>>
>> Do you mind sending a me patch for this?
>
> I just double-checked (after make clean) and there is still something
> wrong :( the only think that seems to work is the
>
> +#include "../../../../usr/include/linux/mman.h"
> #include <sys/mman.h>
>
> hack.
>
> Using "-nostdinc" won't work because we need other headers :(
>

And ... I think I know the problem.

In ../../../../usr/include, there is no "sys" directory. It's called
"linux".

But including <linux/mman.h> instead of <sys/mman.h> doesn't work
either. The only thing that seems to work is


diff --git a/tools/testing/selftests/vm/madv_populate.c
b/tools/testing/selftests/vm/madv_populate.c
index b959e4ebdad4..3ee0e8275600 100644
--- a/tools/testing/selftests/vm/madv_populate.c
+++ b/tools/testing/selftests/vm/madv_populate.c
@@ -14,12 +14,11 @@
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
+#include <linux/mman.h>
#include <sys/mman.h>

#include "../kselftest.h"

-#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
-
/*
* For now, we're using 2 MiB of private anonymous memory for all tests.
*/
@@ -328,15 +327,3 @@ int main(int argc, char **argv)
err, ksft_test_num());
return ksft_exit_pass();
}
-
-#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
-
-#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
-
-int main(int argc, char **argv)
-{
- ksft_print_header();
- ksft_exit_skip("MADV_POPULATE_READ or MADV_POPULATE_WRITE not
defined\n");
-}
-
-#endif /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */


--
Thanks,

David / dhildenb

2021-10-17 09:30:20

by Shuah Khan

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 10/15/21 10:34 AM, David Hildenbrand wrote:
> On 15.10.21 18:28, David Hildenbrand wrote:
>> On 15.10.21 18:25, Shuah Khan wrote:
>>> On 10/15/21 10:19 AM, David Hildenbrand wrote:
>>>> On 15.10.21 18:15, David Hildenbrand wrote:
>>>>> On 15.10.21 18:06, David Hildenbrand wrote:
>>>>>> On 15.10.21 17:47, David Hildenbrand wrote:
>>>>>>> On 15.10.21 17:45, Shuah Khan wrote:
>>>>>>>> On 9/18/21 1:41 AM, David Hildenbrand wrote:
>>>>>>>>> On 18.09.21 00:45, Shuah Khan wrote:
>>>>>>>>>> Hi David,
>>>>>>>>>>
>>>>>>>>>> I am running into the following warning when try to build this test:
>>>>>>>>>>
>>>>>>>>>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>>>>>>>>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>>>>>         |  ^~~~~~~
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I see that the following handling is in place. However there is no
>>>>>>>>>> other information to explain why the check is necessary.
>>>>>>>>>>
>>>>>>>>>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>>>>>>>
>>>>>>>>>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>>>>>>>
>>>>>>>>>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>>>>>
>>>>>>>>>> I do see these defined in:
>>>>>>>>>>
>>>>>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>>>>>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>>>>>>>>>
>>>>>>>>>> Is this the case of missing include from madv_populate.c?
>>>>>>>>>
>>>>>>>>> Hi Shuan,
>>>>>>>>>
>>>>>>>>> note that we're including "#include <sys/mman.h>", which in my
>>>>>>>>> understanding maps to the version installed on your system instead
>>>>>>>>> of the one in our build environment.ing.
>>>>>>>>>
>>>>>>>>> So as soon as you have a proper kernel + the proper headers installed
>>>>>>>>> and try to build, it would pick up MADV_POPULATE_READ and
>>>>>>>>> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
>>>>>>>>> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
>>>>>>>>> that doesn't support it.
>>>>>>>>>
>>>>>>>>> See vm/userfaultfd.c where we do something similar.
>>>>>>>>>
>>>>>>>>
>>>>>>>> Kselftest is for testing the kernel with kernel headers. That is the
>>>>>>>> reason why there is the dependency on header install.
>>>>>>>>
>>>>>>>>>
>>>>>>>>> As soon as we have a proper environment, it seems to work just fine:
>>>>>>>>>
>>>>>>>>> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>>>>>>>>> [root@vm-0 linux]# cat /etc/redhat-release
>>>>>>>>> Fedora release 36 (Rawhide)
>>>>>>>>
>>>>>>>> This is a distro release. We don't want to have dependency on headers
>>>>>>>> from the distro to run selftests. Hope this makes sense.
>>>>>>>>
>>>>>>>> I still see this on my test system running Linux 5.15-rc5.
>>>>>>>
>>>>>>> Did you also install Linux headers? I assume no, correct?
>>>>>>>
>>>>>>
>>>>>> What happens in your environment when compiling and running the
>>>>>> memfd_secret test?
>>>>>>
>>>>>> If assume you'll see a "skip" when executing, because it might also
>>>>>> refer to the local version of linux headers and although it builds, it
>>>>>> really cannot build something "functional". It just doesn't add a
>>>>>> "#warning" to make that obvious.
>>>>>>
>>>>>
>>>>> The following works but looks extremely hackish.
>>>>>
>>>>> diff --git a/tools/testing/selftests/vm/madv_populate.c
>>>>> b/tools/testing/selftests/vm/madv_populate.c
>>>>> index b959e4ebdad4..ab26163db540 100644
>>>>> --- a/tools/testing/selftests/vm/madv_populate.c
>>>>> +++ b/tools/testing/selftests/vm/madv_populate.c
>>>>> @@ -14,12 +14,11 @@
>>>>> #include <unistd.h>
>>>>> #include <errno.h>
>>>>> #include <fcntl.h>
>>>>> +#include "../../../../usr/include/linux/mman.h"
>>>>> #include <sys/mman.h>
>>>>>
>>>>> #include "../kselftest.h"
>>>>>
>>>>> -#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>> -
>>>>> /*
>>>>> * For now, we're using 2 MiB of private anonymous memory for all tests.
>>>>> */
>>>>> @@ -328,15 +327,3 @@ int main(int argc, char **argv)
>>>>> err, ksft_test_num());
>>>>> return ksft_exit_pass();
>>>>> }
>>>>> -
>>>>> -#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>> -
>>>>> -#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>> -
>>>>> -int main(int argc, char **argv)
>>>>> -{
>>>>> - ksft_print_header();
>>>>> - ksft_exit_skip("MADV_POPULATE_READ or MADV_POPULATE_WRITE not
>>>>> defined\n");
>>>>> -}
>>>>> -
>>>>> -#endif /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>>
>>>>>
>>>>> There has to be some clean way to achieve the same.
>>>>>
>>>>
>>>> Sorry for the spam,
>>>>
>>>> diff --git a/tools/testing/selftests/vm/Makefile
>>>> b/tools/testing/selftests/vm/Makefile
>>>> index d9605bd10f2d..ce198b329ff5 100644
>>>> --- a/tools/testing/selftests/vm/Makefile
>>>> +++ b/tools/testing/selftests/vm/Makefile
>>>> @@ -23,7 +23,7 @@ MACHINE ?= $(shell echo $(uname_M) | sed -e
>>>> 's/aarch64.*/arm64/' -e 's/ppc64.*/p
>>>> # LDLIBS.
>>>> MAKEFLAGS += --no-builtin-rules
>>>>
>>>> -CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
>>>> +CFLAGS = -Wall -idirafter ../../../../usr/include $(EXTRA_CFLAGS)
>>>> LDLIBS = -lrt -lpthread
>>>> TEST_GEN_FILES = compaction_test
>>>> TEST_GEN_FILES += gup_test
>>>>
>>>>
>>>> Seems to set the right include path priority.
>>>>
>>>>
>>>
>>> Yes. It works on linux-next-20211012
>>>
>>> Do you mind sending a me patch for this?
>>
>> I just double-checked (after make clean) and there is still something
>> wrong :( the only think that seems to work is the
>>
>> +#include "../../../../usr/include/linux/mman.h"
>> #include <sys/mman.h>
>>
>> hack.
>>
>> Using "-nostdinc" won't work because we need other headers :(
>>
>
> And ... I think I know the problem.
>
> In ../../../../usr/include, there is no "sys" directory. It's called
> "linux".
>
> But including <linux/mman.h> instead of <sys/mman.h> doesn't work
> either. The only thing that seems to work is
>
>
> diff --git a/tools/testing/selftests/vm/madv_populate.c
> b/tools/testing/selftests/vm/madv_populate.c
> index b959e4ebdad4..3ee0e8275600 100644
> --- a/tools/testing/selftests/vm/madv_populate.c
> +++ b/tools/testing/selftests/vm/madv_populate.c
> @@ -14,12 +14,11 @@
> #include <unistd.h>
> #include <errno.h>
> #include <fcntl.h>
> +#include <linux/mman.h>
> #include <sys/mman.h>
>
> #include "../kselftest.h"
>
> -#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
> -
> /*
> * For now, we're using 2 MiB of private anonymous memory for all tests.
> */
> @@ -328,15 +327,3 @@ int main(int argc, char **argv)
> err, ksft_test_num());
> return ksft_exit_pass();
> }
> -
> -#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
> -
> -#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
> -
> -int main(int argc, char **argv)
> -{
> - ksft_print_header();
> - ksft_exit_skip("MADV_POPULATE_READ or MADV_POPULATE_WRITE not
> defined\n");
> -}
> -
> -#endif /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>
>

I tried with just the following and it worked after kselftest-clean
as well.

diff --git a/tools/testing/selftests/vm/madv_populate.c b/tools/testing/selftests/vm/madv_populate.c
index b959e4ebdad4..f9e4b8e1b28c 100644
--- a/tools/testing/selftests/vm/madv_populate.c
+++ b/tools/testing/selftests/vm/madv_populate.c
@@ -14,6 +14,7 @@
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
+#include <linux/mman.h>
#include <sys/mman.h>

#include "../kselftest.h"

thanks,
-- Shuah

2021-10-17 10:06:31

by David Hildenbrand

[permalink] [raw]
Subject: Re: selftests/vm madv_populate.c test

On 15.10.21 18:40, Shuah Khan wrote:
> On 10/15/21 10:34 AM, David Hildenbrand wrote:
>> On 15.10.21 18:28, David Hildenbrand wrote:
>>> On 15.10.21 18:25, Shuah Khan wrote:
>>>> On 10/15/21 10:19 AM, David Hildenbrand wrote:
>>>>> On 15.10.21 18:15, David Hildenbrand wrote:
>>>>>> On 15.10.21 18:06, David Hildenbrand wrote:
>>>>>>> On 15.10.21 17:47, David Hildenbrand wrote:
>>>>>>>> On 15.10.21 17:45, Shuah Khan wrote:
>>>>>>>>> On 9/18/21 1:41 AM, David Hildenbrand wrote:
>>>>>>>>>> On 18.09.21 00:45, Shuah Khan wrote:
>>>>>>>>>>> Hi David,
>>>>>>>>>>>
>>>>>>>>>>> I am running into the following warning when try to build this test:
>>>>>>>>>>>
>>>>>>>>>>> madv_populate.c:334:2: warning: #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition" [-Wcpp]
>>>>>>>>>>>     334 | #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>>>>>>         |  ^~~~~~~
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I see that the following handling is in place. However there is no
>>>>>>>>>>> other information to explain why the check is necessary.
>>>>>>>>>>>
>>>>>>>>>>> #if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>>>>>>>>
>>>>>>>>>>> #else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>>>>>>>>
>>>>>>>>>>> #warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>>>>>>>
>>>>>>>>>>> I do see these defined in:
>>>>>>>>>>>
>>>>>>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_READ       22
>>>>>>>>>>> include/uapi/asm-generic/mman-common.h:#define MADV_POPULATE_WRITE      23
>>>>>>>>>>>
>>>>>>>>>>> Is this the case of missing include from madv_populate.c?
>>>>>>>>>>
>>>>>>>>>> Hi Shuan,
>>>>>>>>>>
>>>>>>>>>> note that we're including "#include <sys/mman.h>", which in my
>>>>>>>>>> understanding maps to the version installed on your system instead
>>>>>>>>>> of the one in our build environment.ing.
>>>>>>>>>>
>>>>>>>>>> So as soon as you have a proper kernel + the proper headers installed
>>>>>>>>>> and try to build, it would pick up MADV_POPULATE_READ and
>>>>>>>>>> MADV_POPULATE_WRITE from the updated headers. That makes sense: you
>>>>>>>>>> annot run any MADV_POPULATE_READ/MADV_POPULATE_WRITE tests on a kernel
>>>>>>>>>> that doesn't support it.
>>>>>>>>>>
>>>>>>>>>> See vm/userfaultfd.c where we do something similar.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Kselftest is for testing the kernel with kernel headers. That is the
>>>>>>>>> reason why there is the dependency on header install.
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> As soon as we have a proper environment, it seems to work just fine:
>>>>>>>>>>
>>>>>>>>>> Linux vm-0 5.15.0-0.rc1.20210915git3ca706c189db.13.fc36.x86_64 #1 SMP Thu Sep 16 11:32:54 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
>>>>>>>>>> [root@vm-0 linux]# cat /etc/redhat-release
>>>>>>>>>> Fedora release 36 (Rawhide)
>>>>>>>>>
>>>>>>>>> This is a distro release. We don't want to have dependency on headers
>>>>>>>>> from the distro to run selftests. Hope this makes sense.
>>>>>>>>>
>>>>>>>>> I still see this on my test system running Linux 5.15-rc5.
>>>>>>>>
>>>>>>>> Did you also install Linux headers? I assume no, correct?
>>>>>>>>
>>>>>>>
>>>>>>> What happens in your environment when compiling and running the
>>>>>>> memfd_secret test?
>>>>>>>
>>>>>>> If assume you'll see a "skip" when executing, because it might also
>>>>>>> refer to the local version of linux headers and although it builds, it
>>>>>>> really cannot build something "functional". It just doesn't add a
>>>>>>> "#warning" to make that obvious.
>>>>>>>
>>>>>>
>>>>>> The following works but looks extremely hackish.
>>>>>>
>>>>>> diff --git a/tools/testing/selftests/vm/madv_populate.c
>>>>>> b/tools/testing/selftests/vm/madv_populate.c
>>>>>> index b959e4ebdad4..ab26163db540 100644
>>>>>> --- a/tools/testing/selftests/vm/madv_populate.c
>>>>>> +++ b/tools/testing/selftests/vm/madv_populate.c
>>>>>> @@ -14,12 +14,11 @@
>>>>>> #include <unistd.h>
>>>>>> #include <errno.h>
>>>>>> #include <fcntl.h>
>>>>>> +#include "../../../../usr/include/linux/mman.h"
>>>>>> #include <sys/mman.h>
>>>>>>
>>>>>> #include "../kselftest.h"
>>>>>>
>>>>>> -#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>>>>>> -
>>>>>> /*
>>>>>> * For now, we're using 2 MiB of private anonymous memory for all tests.
>>>>>> */
>>>>>> @@ -328,15 +327,3 @@ int main(int argc, char **argv)
>>>>>> err, ksft_test_num());
>>>>>> return ksft_exit_pass();
>>>>>> }
>>>>>> -
>>>>>> -#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>>> -
>>>>>> -#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>>>>>> -
>>>>>> -int main(int argc, char **argv)
>>>>>> -{
>>>>>> - ksft_print_header();
>>>>>> - ksft_exit_skip("MADV_POPULATE_READ or MADV_POPULATE_WRITE not
>>>>>> defined\n");
>>>>>> -}
>>>>>> -
>>>>>> -#endif /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>>>>>
>>>>>>
>>>>>> There has to be some clean way to achieve the same.
>>>>>>
>>>>>
>>>>> Sorry for the spam,
>>>>>
>>>>> diff --git a/tools/testing/selftests/vm/Makefile
>>>>> b/tools/testing/selftests/vm/Makefile
>>>>> index d9605bd10f2d..ce198b329ff5 100644
>>>>> --- a/tools/testing/selftests/vm/Makefile
>>>>> +++ b/tools/testing/selftests/vm/Makefile
>>>>> @@ -23,7 +23,7 @@ MACHINE ?= $(shell echo $(uname_M) | sed -e
>>>>> 's/aarch64.*/arm64/' -e 's/ppc64.*/p
>>>>> # LDLIBS.
>>>>> MAKEFLAGS += --no-builtin-rules
>>>>>
>>>>> -CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
>>>>> +CFLAGS = -Wall -idirafter ../../../../usr/include $(EXTRA_CFLAGS)
>>>>> LDLIBS = -lrt -lpthread
>>>>> TEST_GEN_FILES = compaction_test
>>>>> TEST_GEN_FILES += gup_test
>>>>>
>>>>>
>>>>> Seems to set the right include path priority.
>>>>>
>>>>>
>>>>
>>>> Yes. It works on linux-next-20211012
>>>>
>>>> Do you mind sending a me patch for this?
>>>
>>> I just double-checked (after make clean) and there is still something
>>> wrong :( the only think that seems to work is the
>>>
>>> +#include "../../../../usr/include/linux/mman.h"
>>> #include <sys/mman.h>
>>>
>>> hack.
>>>
>>> Using "-nostdinc" won't work because we need other headers :(
>>>
>>
>> And ... I think I know the problem.
>>
>> In ../../../../usr/include, there is no "sys" directory. It's called
>> "linux".
>>
>> But including <linux/mman.h> instead of <sys/mman.h> doesn't work
>> either. The only thing that seems to work is
>>
>>
>> diff --git a/tools/testing/selftests/vm/madv_populate.c
>> b/tools/testing/selftests/vm/madv_populate.c
>> index b959e4ebdad4..3ee0e8275600 100644
>> --- a/tools/testing/selftests/vm/madv_populate.c
>> +++ b/tools/testing/selftests/vm/madv_populate.c
>> @@ -14,12 +14,11 @@
>> #include <unistd.h>
>> #include <errno.h>
>> #include <fcntl.h>
>> +#include <linux/mman.h>
>> #include <sys/mman.h>
>>
>> #include "../kselftest.h"
>>
>> -#if defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE)
>> -
>> /*
>> * For now, we're using 2 MiB of private anonymous memory for all tests.
>> */
>> @@ -328,15 +327,3 @@ int main(int argc, char **argv)
>> err, ksft_test_num());
>> return ksft_exit_pass();
>> }
>> -
>> -#else /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>> -
>> -#warning "missing MADV_POPULATE_READ or MADV_POPULATE_WRITE definition"
>> -
>> -int main(int argc, char **argv)
>> -{
>> - ksft_print_header();
>> - ksft_exit_skip("MADV_POPULATE_READ or MADV_POPULATE_WRITE not
>> defined\n");
>> -}
>> -
>> -#endif /* defined(MADV_POPULATE_READ) && defined(MADV_POPULATE_WRITE) */
>>
>>
>
> I tried with just the following and it worked after kselftest-clean
> as well.
>
> diff --git a/tools/testing/selftests/vm/madv_populate.c b/tools/testing/selftests/vm/madv_populate.c
> index b959e4ebdad4..f9e4b8e1b28c 100644
> --- a/tools/testing/selftests/vm/madv_populate.c
> +++ b/tools/testing/selftests/vm/madv_populate.c
> @@ -14,6 +14,7 @@
> #include <unistd.h>
> #include <errno.h>
> #include <fcntl.h>
> +#include <linux/mman.h>
> #include <sys/mman.h>
>
> #include "../kselftest.h"

I'll send a patch, thanks. (I hope this combination won't cause trouble
in the future)


--
Thanks,

David / dhildenb