This is the start of the stable review cycle for the 5.6.3 release.
There are 30 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.3-rc2.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.6.3-rc2
Randy Dunlap <[email protected]>
mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
Arnaldo Carvalho de Melo <[email protected]>
perf python: Fix clang detection to strip out options passed in $CC
Bibby Hsieh <[email protected]>
soc: mediatek: knows_txdone needs to be set in Mediatek CMDQ helper
Geoffrey Allott <[email protected]>
ALSA: hda/ca0132 - Add Recon3Di quirk to handle integrated sound on EVGA X99 Classified motherboard
Mike Snitzer <[email protected]>
Revert "dm: always call blk_queue_split() in dm_process_bio()"
Takashi Iwai <[email protected]>
Revert "ALSA: uapi: Drop asound.h inclusion from asoc.h"
Hans de Goede <[email protected]>
power: supply: axp288_charger: Add special handling for HP Pavilion x2 10
Hans de Goede <[email protected]>
extcon: axp288: Add wakeup support
Freeman Liu <[email protected]>
nvmem: sprd: Fix the block lock operation
Nicholas Johnson <[email protected]>
nvmem: check for NULL reg_read and reg_write before dereferencing
Khouloud Touil <[email protected]>
nvmem: release the write-protect pin
Alexander Usyskin <[email protected]>
mei: me: add cedar fork device ids
Eugene Syromiatnikov <[email protected]>
coresight: do not use the BIT() macro in the UAPI header
Kelsey Skunberg <[email protected]>
PCI: sysfs: Revert "rescan" file renames
Kishon Vijay Abraham I <[email protected]>
misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
Kishon Vijay Abraham I <[email protected]>
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
YueHaibing <[email protected]>
misc: rtsx: set correct pcr_ops for rts522A
Uma Shankar <[email protected]>
drm/i915/display: Fix mode private_flags comparison at atomic_check
Torsten Duwe <[email protected]>
drm/bridge: analogix-anx6345: Avoid duplicate -supply suffix
Matthew Wilcox (Oracle) <[email protected]>
XArray: Fix xa_find_next for large multi-index entries
Guenter Roeck <[email protected]>
brcmfmac: abort and release host after error
Daniel Jordan <[email protected]>
padata: fix uninitialized return value in padata_replace()
Xin Long <[email protected]>
udp: initialize is_flist with 0 in udp_gro_receive
Florian Westphal <[email protected]>
net: fix fraglist segmentation reference count leak
Codrin Ciubotariu <[email protected]>
net: macb: Fix handling of fixed-link node
Qiujun Huang <[email protected]>
sctp: fix refcount bug in sctp_wfree
Marcelo Ricardo Leitner <[email protected]>
sctp: fix possibly using a bad saddr with a given dst
William Dauchy <[email protected]>
net, ip_tunnel: fix interface lookup with no key
Codrin Ciubotariu <[email protected]>
net: dsa: ksz: Select KSZ protocol tag
Qian Cai <[email protected]>
ipv4: fix a RCU-list lock in fib_triestat_seq_show
-------------
Diffstat:
Makefile | 4 +-
drivers/extcon/extcon-axp288.c | 32 ++++++++++++
drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 4 +-
drivers/gpu/drm/i915/display/intel_display.c | 4 +-
drivers/md/dm.c | 5 +-
drivers/misc/cardreader/rts5227.c | 1 +
drivers/misc/mei/hw-me-regs.h | 2 +
drivers/misc/mei/pci-me.c | 2 +
drivers/misc/pci_endpoint_test.c | 14 ++++--
drivers/net/dsa/microchip/Kconfig | 1 +
drivers/net/ethernet/cadence/macb_main.c | 3 ++
.../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +
drivers/nvmem/core.c | 1 +
drivers/nvmem/nvmem-sysfs.c | 6 +++
drivers/nvmem/sprd-efuse.c | 2 +-
drivers/pci/pci-sysfs.c | 6 ++-
drivers/power/supply/axp288_charger.c | 57 +++++++++++++++++++++-
drivers/soc/mediatek/mtk-cmdq-helper.c | 1 +
include/uapi/linux/coresight-stm.h | 6 ++-
include/uapi/sound/asoc.h | 1 +
kernel/padata.c | 2 +-
lib/test_xarray.c | 18 +++++++
lib/xarray.c | 3 +-
mm/mempolicy.c | 6 ++-
net/core/skbuff.c | 1 +
net/ipv4/fib_trie.c | 3 ++
net/ipv4/ip_tunnel.c | 6 +--
net/ipv4/udp_offload.c | 1 +
net/sctp/ipv6.c | 20 +++++---
net/sctp/protocol.c | 28 +++++++----
net/sctp/socket.c | 31 +++++++++---
sound/pci/hda/patch_ca0132.c | 1 +
tools/perf/util/setup.py | 2 +-
33 files changed, 226 insertions(+), 50 deletions(-)
On 4/7/20 10:39 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.6.3 release.
> There are 30 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.3-rc2.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On 07/04/2020 17:39, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.6.3 release.
> There are 30 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.3-rc2.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v5.6:
13 builds: 13 pass, 0 fail
24 boots: 24 pass, 0 fail
40 tests: 40 pass, 0 fail
Linux version: 5.6.3-rc2-gf106acd0db7c
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra210-p3450-0000,
tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On 4/7/20 1:02 PM, shuah wrote:
> On 4/7/20 10:39 AM, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 5.6.3 release.
>> There are 30 patches in this series, all will be posted as a response
>> to this one. If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.3-rc2.gz
>>
>> or in the git tree and branch at:
>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>> linux-5.6.y
>> and the diffstat can be found below.
>>
>> thanks,
>>
>> greg k-h
>>
>
> Compiled and booted on my test system. No dmesg regressions.
>
> thanks,
> -- Shuah
>
Okay. After a reboot ran into the following problem with wifi.
Turning wifi off and on worked.
[ 4.499152] Generic FE-GE Realtek PHY r8169-100:00: attached PHY
driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00,
irq=IGNORE)
[ 4.596676] r8169 0000:01:00.0 enp1s0f0: Link is Down
[ 9.916063] ath10k_pci 0000:02:00.0: wmi service ready event not received
[ 9.996205] ath10k_pci 0000:02:00.0: Could not init core: -110
[ 10.127822] rfkill: input handler disabled
[ 15.268624] wlp2s0: authenticate with c0:56:27:75:aa:b4
[ 15.336248] wlp2s0: send auth to c0:56:27:75:aa:b4 (try 1/3)
[ 15.357599] wlp2s0: authenticated
[ 15.358081] wlp2s0: associating with AP with corrupt probe response
[ 15.360036] wlp2s0: associate with c0:56:27:75:aa:b4 (try 1/3)
[ 15.388367] wlp2s0: RX AssocResp from c0:56:27:75:aa:b4 (capab=0x411
status=0 aid=1)
[ 15.389937] ------------[ cut here ]------------
[ 15.389955] WARNING: CPU: 5 PID: 0 at
drivers/net/wireless/ath/ath10k/htt_rx.c:35
ath10k_htt_rx_pop_paddr.isra.0+0xca/0x100 [ath10k_core]
[ 15.389956] Modules linked in: cmac bnep binfmt_misc nls_iso8859_1
edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel amdgpu snd_hda_codec_realtek snd_hda_codec_generic
ledtrig_audio snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib
snd_seq_midi snd_hda_intel snd_seq_midi_event snd_intel_dspcfg
snd_hda_codec aesni_intel snd_rawmidi crypto_simd snd_hda_core btusb
amd_iommu_v2 cryptd snd_hwdep ath10k_pci glue_helper btrtl gpu_sched
ath10k_core btbcm ttm btintel mc snd_seq bluetooth snd_pcm ath serio_raw
k10temp wmi_bmof snd_seq_device drm_kms_helper pl2303 input_leds
ecdh_generic ecc snd_pci_acp3x mac80211 cec snd_timer drm snd cfg80211
i2c_algo_bit fb_sys_fops ipmi_devintf syscopyarea sysfillrect sysimgblt
ccp soundcore libarc4 ipmi_msghandler mac_hid sch_fq_codel parport_pc
ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid ahci
psmouse i2c_piix4 libahci nvme nvme_core r8169 realtek wmi video
[ 15.389998] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.6.3-rc2+ #4
[ 15.389999] Hardware name: LENOVO 10VGCTO1WW/3130, BIOS M1XKT45A
08/21/2019
[ 15.390011] RIP: 0010:ath10k_htt_rx_pop_paddr.isra.0+0xca/0x100
[ath10k_core]
[ 15.390014] Code: 8b b8 a8 02 00 00 48 8b 87 40 02 00 00 48 85 c0 74
24 48 8b 40 28 48 85 c0 74 14 45 31 c0 b9 02 00 00 00 e8 08 1e 6b fc eb
05 <0f> 0b 45 31 e4 4c 89 e0 41 5c 5d c3 48 8b 05 b3 2d 3d fd 48 85 c0
[ 15.390016] RSP: 0018:ffffa10d002ecd78 EFLAGS: 00010246
[ 15.390017] RAX: 0000000000000000 RBX: ffff8d94fd1a4750 RCX:
ffff8d952f761e80
[ 15.390019] RDX: 000000007fee6d00 RSI: ffff8d952f76293c RDI:
ffff8d952f762828
[ 15.390020] RBP: ffffa10d002ecd80 R08: 0000000000200000 R09:
ffff8d94fd08b758
[ 15.390021] R10: 0000000000000000 R11: 000ffffffffff000 R12:
ffff8d94fd1a4748
[ 15.390022] R13: ffffa10d002ece28 R14: ffff8d952f761e80 R15:
ffff8d952f761e80
[ 15.390024] FS: 0000000000000000(0000) GS:ffff8d9537b40000(0000)
knlGS:0000000000000000
[ 15.390025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.390026] CR2: 0000561a638de9c0 CR3: 000000023171a000 CR4:
00000000003406e0
[ 15.390027] Call Trace:
[ 15.390029] <IRQ>
[ 15.390042] ath10k_htt_txrx_compl_task+0x758/0x14b0 [ath10k_core]
[ 15.390048] ath10k_pci_napi_poll+0x56/0x120 [ath10k_pci]
[ 15.390053] net_rx_action+0x13a/0x370
[ 15.390057] __do_softirq+0xe1/0x2d6
[ 15.390061] irq_exit+0xae/0xb0
[ 15.390064] do_IRQ+0x5a/0xf0
[ 15.390067] common_interrupt+0xf/0xf
[ 15.390068] </IRQ>
[ 15.390072] RIP: 0010:cpuidle_enter_state+0xca/0x3e0
[ 15.390074] Code: ff e8 8a 56 80 ff 80 7d c7 00 74 17 9c 58 0f 1f 44
00 00 f6 c4 02 0f 85 ea 02 00 00 31 ff e8 1d d6 86 ff fb 66 0f 1f 44 00
00 <45> 85 e4 0f 88 3f 02 00 00 49 63 d4 4c 8b 7d d0 4c 2b 7d c8 48 8d
[ 15.390075] RSP: 0018:ffffa10d0018fe38 EFLAGS: 00000246 ORIG_RAX:
ffffffffffffffd9
[ 15.390077] RAX: ffff8d9537b6ce40 RBX: ffff8d9534a93c00 RCX:
000000000000001f
[ 15.390078] RDX: 0000000000000000 RSI: 00000000280a5e6f RDI:
0000000000000000
[ 15.390079] RBP: ffffa10d0018fe78 R08: 00000003954e39cc R09:
ffffffffbd977140
[ 15.390079] R10: ffff8d9537b6bb04 R11: ffff8d9537b6bae4 R12:
0000000000000001
[ 15.390080] R13: ffffffffbd977140 R14: 0000000000000001 R15:
ffff8d9534a93c00
[ 15.390086] ? cpuidle_enter_state+0xa6/0x3e0
[ 15.390089] cpuidle_enter+0x2e/0x40
[ 15.390092] call_cpuidle+0x23/0x40
[ 15.390094] do_idle+0x1e7/0x280
[ 15.390097] cpu_startup_entry+0x20/0x30
[ 15.390100] start_secondary+0x167/0x1c0
[ 15.390103] secondary_startup_64+0xa4/0xb0
[ 15.390106] ---[ end trace 60c3cabcf041b110 ]---
[ 15.390118] ath10k_pci 0000:02:00.0: failed to pop paddr list: -2
[ 15.390840] wlp2s0: associated
[ 19.387476] wlp2s0: deauthenticated from c0:56:27:75:aa:b4 (Reason:
2=PREV_AUTH_NOT_VALID)
[ 24.377944] wlp2s0: authenticate with c0:56:27:75:aa:b4
thanks,
-- Shuah
On 4/7/20 12:18 PM, shuah wrote:
> On 4/7/20 1:02 PM, shuah wrote:
>> On 4/7/20 10:39 AM, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 5.6.3 release.
>>> There are 30 patches in this series, all will be posted as a response
>>> to this one. If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
>>> Anything received after that time might be too late.
>>>
>>> The whole patch series can be found in one patch at:
>>> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.3-rc2.gz
>>> or in the git tree and branch at:
>>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
>>> and the diffstat can be found below.
>>>
>>> thanks,
>>>
>>> greg k-h
>>>
>>
>> Compiled and booted on my test system. No dmesg regressions.
>>
>> thanks,
>> -- Shuah
>>
>
> Okay. After a reboot ran into the following problem with wifi.
> Turning wifi off and on worked.
>
>
> [ 4.499152] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
> [ 4.596676] r8169 0000:01:00.0 enp1s0f0: Link is Down
> [ 9.916063] ath10k_pci 0000:02:00.0: wmi service ready event not received
> [ 9.996205] ath10k_pci 0000:02:00.0: Could not init core: -110
> [ 10.127822] rfkill: input handler disabled
> [ 15.268624] wlp2s0: authenticate with c0:56:27:75:aa:b4
> [ 15.336248] wlp2s0: send auth to c0:56:27:75:aa:b4 (try 1/3)
> [ 15.357599] wlp2s0: authenticated
> [ 15.358081] wlp2s0: associating with AP with corrupt probe response
> [ 15.360036] wlp2s0: associate with c0:56:27:75:aa:b4 (try 1/3)
> [ 15.388367] wlp2s0: RX AssocResp from c0:56:27:75:aa:b4 (capab=0x411 status=0 aid=1)
> [ 15.389937] ------------[ cut here ]------------
> [ 15.389955] WARNING: CPU: 5 PID: 0 at drivers/net/wireless/ath/ath10k/htt_rx.c:35 ath10k_htt_rx_pop_paddr.isra.0+0xca/0x100 [ath10k_core]
> [ 15.389956] Modules linked in: cmac bnep binfmt_misc nls_iso8859_1 edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel amdgpu snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_seq_midi snd_hda_intel snd_seq_midi_event snd_intel_dspcfg snd_hda_codec aesni_intel snd_rawmidi crypto_simd snd_hda_core btusb amd_iommu_v2 cryptd snd_hwdep ath10k_pci glue_helper btrtl gpu_sched ath10k_core btbcm ttm btintel mc snd_seq bluetooth snd_pcm ath serio_raw k10temp wmi_bmof snd_seq_device drm_kms_helper pl2303 input_leds ecdh_generic ecc snd_pci_acp3x mac80211 cec snd_timer drm snd cfg80211 i2c_algo_bit fb_sys_fops ipmi_devintf syscopyarea sysfillrect sysimgblt ccp soundcore libarc4 ipmi_msghandler mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid ahci psmouse i2c_piix4 libahci nvme nvme_core r8169 realtek wmi video
> [ 15.389998] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.6.3-rc2+ #4
> [ 15.389999] Hardware name: LENOVO 10VGCTO1WW/3130, BIOS M1XKT45A 08/21/2019
> [ 15.390011] RIP: 0010:ath10k_htt_rx_pop_paddr.isra.0+0xca/0x100 [ath10k_core]
> [ 15.390014] Code: 8b b8 a8 02 00 00 48 8b 87 40 02 00 00 48 85 c0 74 24 48 8b 40 28 48 85 c0 74 14 45 31 c0 b9 02 00 00 00 e8 08 1e 6b fc eb 05 <0f> 0b 45 31 e4 4c 89 e0 41 5c 5d c3 48 8b 05 b3 2d 3d fd 48 85 c0
> [ 15.390016] RSP: 0018:ffffa10d002ecd78 EFLAGS: 00010246
> [ 15.390017] RAX: 0000000000000000 RBX: ffff8d94fd1a4750 RCX: ffff8d952f761e80
> [ 15.390019] RDX: 000000007fee6d00 RSI: ffff8d952f76293c RDI: ffff8d952f762828
> [ 15.390020] RBP: ffffa10d002ecd80 R08: 0000000000200000 R09: ffff8d94fd08b758
> [ 15.390021] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8d94fd1a4748
> [ 15.390022] R13: ffffa10d002ece28 R14: ffff8d952f761e80 R15: ffff8d952f761e80
> [ 15.390024] FS: 0000000000000000(0000) GS:ffff8d9537b40000(0000) knlGS:0000000000000000
> [ 15.390025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 15.390026] CR2: 0000561a638de9c0 CR3: 000000023171a000 CR4: 00000000003406e0
> [ 15.390027] Call Trace:
> [ 15.390029] <IRQ>
> [ 15.390042] ath10k_htt_txrx_compl_task+0x758/0x14b0 [ath10k_core]
> [ 15.390048] ath10k_pci_napi_poll+0x56/0x120 [ath10k_pci]
> [ 15.390053] net_rx_action+0x13a/0x370
> [ 15.390057] __do_softirq+0xe1/0x2d6
> [ 15.390061] irq_exit+0xae/0xb0
> [ 15.390064] do_IRQ+0x5a/0xf0
> [ 15.390067] common_interrupt+0xf/0xf
> [ 15.390068] </IRQ>
> [ 15.390072] RIP: 0010:cpuidle_enter_state+0xca/0x3e0
> [ 15.390074] Code: ff e8 8a 56 80 ff 80 7d c7 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 ea 02 00 00 31 ff e8 1d d6 86 ff fb 66 0f 1f 44 00 00 <45> 85 e4 0f 88 3f 02 00 00 49 63 d4 4c 8b 7d d0 4c 2b 7d c8 48 8d
> [ 15.390075] RSP: 0018:ffffa10d0018fe38 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd9
> [ 15.390077] RAX: ffff8d9537b6ce40 RBX: ffff8d9534a93c00 RCX: 000000000000001f
> [ 15.390078] RDX: 0000000000000000 RSI: 00000000280a5e6f RDI: 0000000000000000
> [ 15.390079] RBP: ffffa10d0018fe78 R08: 00000003954e39cc R09: ffffffffbd977140
> [ 15.390079] R10: ffff8d9537b6bb04 R11: ffff8d9537b6bae4 R12: 0000000000000001
> [ 15.390080] R13: ffffffffbd977140 R14: 0000000000000001 R15: ffff8d9534a93c00
> [ 15.390086] ? cpuidle_enter_state+0xa6/0x3e0
> [ 15.390089] cpuidle_enter+0x2e/0x40
> [ 15.390092] call_cpuidle+0x23/0x40
> [ 15.390094] do_idle+0x1e7/0x280
> [ 15.390097] cpu_startup_entry+0x20/0x30
> [ 15.390100] start_secondary+0x167/0x1c0
> [ 15.390103] secondary_startup_64+0xa4/0xb0
> [ 15.390106] ---[ end trace 60c3cabcf041b110 ]---
> [ 15.390118] ath10k_pci 0000:02:00.0: failed to pop paddr list: -2
> [ 15.390840] wlp2s0: associated
> [ 19.387476] wlp2s0: deauthenticated from c0:56:27:75:aa:b4 (Reason: 2=PREV_AUTH_NOT_VALID)
> [ 24.377944] wlp2s0: authenticate with c0:56:27:75:aa:b4
>
I don't immediately see a change that might be responsible for this problem. Since v5.5,
possibly, but not since v5.6. That makes me wonder if this is reproducible. Any idea ?
Thanks,
Guenter
On 4/7/20 1:33 PM, Guenter Roeck wrote:
> On 4/7/20 12:18 PM, shuah wrote:
>> On 4/7/20 1:02 PM, shuah wrote:
>>> On 4/7/20 10:39 AM, Greg Kroah-Hartman wrote:
>>>> This is the start of the stable review cycle for the 5.6.3 release.
>>>> There are 30 patches in this series, all will be posted as a response
>>>> to this one. If anyone has any issues with these being applied, please
>>>> let me know.
>>>>
>>>> Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
>>>> Anything received after that time might be too late.
>>>>
>>>> The whole patch series can be found in one patch at:
>>>> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.3-rc2.gz
>>>> or in the git tree and branch at:
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
>>>> and the diffstat can be found below.
>>>>
>>>> thanks,
>>>>
>>>> greg k-h
>>>>
>>>
>>> Compiled and booted on my test system. No dmesg regressions.
>>>
>>> thanks,
>>> -- Shuah
>>>
>>
>> Okay. After a reboot ran into the following problem with wifi.
>> Turning wifi off and on worked.
>>
>>
>> [ 4.499152] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
>> [ 4.596676] r8169 0000:01:00.0 enp1s0f0: Link is Down
>> [ 9.916063] ath10k_pci 0000:02:00.0: wmi service ready event not received
>> [ 9.996205] ath10k_pci 0000:02:00.0: Could not init core: -110
>> [ 10.127822] rfkill: input handler disabled
>> [ 15.268624] wlp2s0: authenticate with c0:56:27:75:aa:b4
>> [ 15.336248] wlp2s0: send auth to c0:56:27:75:aa:b4 (try 1/3)
>> [ 15.357599] wlp2s0: authenticated
>> [ 15.358081] wlp2s0: associating with AP with corrupt probe response
>> [ 15.360036] wlp2s0: associate with c0:56:27:75:aa:b4 (try 1/3)
>> [ 15.388367] wlp2s0: RX AssocResp from c0:56:27:75:aa:b4 (capab=0x411 status=0 aid=1)
>> [ 15.389937] ------------[ cut here ]------------
>> [ 15.389955] WARNING: CPU: 5 PID: 0 at drivers/net/wireless/ath/ath10k/htt_rx.c:35 ath10k_htt_rx_pop_paddr.isra.0+0xca/0x100 [ath10k_core]
>> [ 15.389956] Modules linked in: cmac bnep binfmt_misc nls_iso8859_1 edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel amdgpu snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_seq_midi snd_hda_intel snd_seq_midi_event snd_intel_dspcfg snd_hda_codec aesni_intel snd_rawmidi crypto_simd snd_hda_core btusb amd_iommu_v2 cryptd snd_hwdep ath10k_pci glue_helper btrtl gpu_sched ath10k_core btbcm ttm btintel mc snd_seq bluetooth snd_pcm ath serio_raw k10temp wmi_bmof snd_seq_device drm_kms_helper pl2303 input_leds ecdh_generic ecc snd_pci_acp3x mac80211 cec snd_timer drm snd cfg80211 i2c_algo_bit fb_sys_fops ipmi_devintf syscopyarea sysfillrect sysimgblt ccp soundcore libarc4 ipmi_msghandler mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid ahci psmouse i2c_piix4 libahci nvme nvme_core r8169 realtek wmi video
>> [ 15.389998] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.6.3-rc2+ #4
>> [ 15.389999] Hardware name: LENOVO 10VGCTO1WW/3130, BIOS M1XKT45A 08/21/2019
>> [ 15.390011] RIP: 0010:ath10k_htt_rx_pop_paddr.isra.0+0xca/0x100 [ath10k_core]
>> [ 15.390014] Code: 8b b8 a8 02 00 00 48 8b 87 40 02 00 00 48 85 c0 74 24 48 8b 40 28 48 85 c0 74 14 45 31 c0 b9 02 00 00 00 e8 08 1e 6b fc eb 05 <0f> 0b 45 31 e4 4c 89 e0 41 5c 5d c3 48 8b 05 b3 2d 3d fd 48 85 c0
>> [ 15.390016] RSP: 0018:ffffa10d002ecd78 EFLAGS: 00010246
>> [ 15.390017] RAX: 0000000000000000 RBX: ffff8d94fd1a4750 RCX: ffff8d952f761e80
>> [ 15.390019] RDX: 000000007fee6d00 RSI: ffff8d952f76293c RDI: ffff8d952f762828
>> [ 15.390020] RBP: ffffa10d002ecd80 R08: 0000000000200000 R09: ffff8d94fd08b758
>> [ 15.390021] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8d94fd1a4748
>> [ 15.390022] R13: ffffa10d002ece28 R14: ffff8d952f761e80 R15: ffff8d952f761e80
>> [ 15.390024] FS: 0000000000000000(0000) GS:ffff8d9537b40000(0000) knlGS:0000000000000000
>> [ 15.390025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [ 15.390026] CR2: 0000561a638de9c0 CR3: 000000023171a000 CR4: 00000000003406e0
>> [ 15.390027] Call Trace:
>> [ 15.390029] <IRQ>
>> [ 15.390042] ath10k_htt_txrx_compl_task+0x758/0x14b0 [ath10k_core]
>> [ 15.390048] ath10k_pci_napi_poll+0x56/0x120 [ath10k_pci]
>> [ 15.390053] net_rx_action+0x13a/0x370
>> [ 15.390057] __do_softirq+0xe1/0x2d6
>> [ 15.390061] irq_exit+0xae/0xb0
>> [ 15.390064] do_IRQ+0x5a/0xf0
>> [ 15.390067] common_interrupt+0xf/0xf
>> [ 15.390068] </IRQ>
>> [ 15.390072] RIP: 0010:cpuidle_enter_state+0xca/0x3e0
>> [ 15.390074] Code: ff e8 8a 56 80 ff 80 7d c7 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 ea 02 00 00 31 ff e8 1d d6 86 ff fb 66 0f 1f 44 00 00 <45> 85 e4 0f 88 3f 02 00 00 49 63 d4 4c 8b 7d d0 4c 2b 7d c8 48 8d
>> [ 15.390075] RSP: 0018:ffffa10d0018fe38 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd9
>> [ 15.390077] RAX: ffff8d9537b6ce40 RBX: ffff8d9534a93c00 RCX: 000000000000001f
>> [ 15.390078] RDX: 0000000000000000 RSI: 00000000280a5e6f RDI: 0000000000000000
>> [ 15.390079] RBP: ffffa10d0018fe78 R08: 00000003954e39cc R09: ffffffffbd977140
>> [ 15.390079] R10: ffff8d9537b6bb04 R11: ffff8d9537b6bae4 R12: 0000000000000001
>> [ 15.390080] R13: ffffffffbd977140 R14: 0000000000000001 R15: ffff8d9534a93c00
>> [ 15.390086] ? cpuidle_enter_state+0xa6/0x3e0
>> [ 15.390089] cpuidle_enter+0x2e/0x40
>> [ 15.390092] call_cpuidle+0x23/0x40
>> [ 15.390094] do_idle+0x1e7/0x280
>> [ 15.390097] cpu_startup_entry+0x20/0x30
>> [ 15.390100] start_secondary+0x167/0x1c0
>> [ 15.390103] secondary_startup_64+0xa4/0xb0
>> [ 15.390106] ---[ end trace 60c3cabcf041b110 ]---
>> [ 15.390118] ath10k_pci 0000:02:00.0: failed to pop paddr list: -2
>> [ 15.390840] wlp2s0: associated
>> [ 19.387476] wlp2s0: deauthenticated from c0:56:27:75:aa:b4 (Reason: 2=PREV_AUTH_NOT_VALID)
>> [ 24.377944] wlp2s0: authenticate with c0:56:27:75:aa:b4
>>
>
> I don't immediately see a change that might be responsible for this problem. Since v5.5,
> possibly, but not since v5.6. That makes me wonder if this is reproducible. Any idea ?
>
> Thanks,
> Guenter
Yeah I didn't see anything obvious either.
I am running into an existing problem. No reason to hold this release
up for this problem.
thanks,
-- Shuah
On 4/7/20 9:39 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.6.3 release.
> There are 30 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 155 pass: 155 fail: 0
Qemu test results:
total: 428 pass: 428 fail: 0
Guenter
On Tue, Apr 07, 2020 at 01:51:06PM -0600, shuah wrote:
> On 4/7/20 1:33 PM, Guenter Roeck wrote:
> > On 4/7/20 12:18 PM, shuah wrote:
> > > On 4/7/20 1:02 PM, shuah wrote:
> > > > On 4/7/20 10:39 AM, Greg Kroah-Hartman wrote:
> > > > > This is the start of the stable review cycle for the 5.6.3 release.
> > > > > There are 30 patches in this series, all will be posted as a response
> > > > > to this one.? If anyone has any issues with these being applied, please
> > > > > let me know.
> > > > >
> > > > > Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
> > > > > Anything received after that time might be too late.
> > > > >
> > > > > The whole patch series can be found in one patch at:
> > > > > ????https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.3-rc2.gz
> > > > > or in the git tree and branch at:
> > > > > ????git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
> > > > > and the diffstat can be found below.
> > > > >
> > > > > thanks,
> > > > >
> > > > > greg k-h
> > > > >
> > > >
> > > > Compiled and booted on my test system. No dmesg regressions.
> > > >
> > > > thanks,
> > > > -- Shuah
> > > >
> > >
> > > Okay. After a reboot ran into the following problem with wifi.
> > > Turning wifi off and on worked.
> > >
> > >
> > > [??? 4.499152] Generic FE-GE Realtek PHY r8169-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
> > > [??? 4.596676] r8169 0000:01:00.0 enp1s0f0: Link is Down
> > > [??? 9.916063] ath10k_pci 0000:02:00.0: wmi service ready event not received
> > > [??? 9.996205] ath10k_pci 0000:02:00.0: Could not init core: -110
> > > [?? 10.127822] rfkill: input handler disabled
> > > [?? 15.268624] wlp2s0: authenticate with c0:56:27:75:aa:b4
> > > [?? 15.336248] wlp2s0: send auth to c0:56:27:75:aa:b4 (try 1/3)
> > > [?? 15.357599] wlp2s0: authenticated
> > > [?? 15.358081] wlp2s0: associating with AP with corrupt probe response
> > > [?? 15.360036] wlp2s0: associate with c0:56:27:75:aa:b4 (try 1/3)
> > > [?? 15.388367] wlp2s0: RX AssocResp from c0:56:27:75:aa:b4 (capab=0x411 status=0 aid=1)
> > > [?? 15.389937] ------------[ cut here ]------------
> > > [?? 15.389955] WARNING: CPU: 5 PID: 0 at drivers/net/wireless/ath/ath10k/htt_rx.c:35 ath10k_htt_rx_pop_paddr.isra.0+0xca/0x100 [ath10k_core]
> > > [?? 15.389956] Modules linked in: cmac bnep binfmt_misc nls_iso8859_1 edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel amdgpu snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_seq_midi snd_hda_intel snd_seq_midi_event snd_intel_dspcfg snd_hda_codec aesni_intel snd_rawmidi crypto_simd snd_hda_core btusb amd_iommu_v2 cryptd snd_hwdep ath10k_pci glue_helper btrtl gpu_sched ath10k_core btbcm ttm btintel mc snd_seq bluetooth snd_pcm ath serio_raw k10temp wmi_bmof snd_seq_device drm_kms_helper pl2303 input_leds ecdh_generic ecc snd_pci_acp3x mac80211 cec snd_timer drm snd cfg80211 i2c_algo_bit fb_sys_fops ipmi_devintf syscopyarea sysfillrect sysimgblt ccp soundcore libarc4 ipmi_msghandler mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid ahci psmouse i2c_piix4 libahci nvme nvme_core r8169 realtek wmi video
> > > [?? 15.389998] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.6.3-rc2+ #4
> > > [?? 15.389999] Hardware name: LENOVO 10VGCTO1WW/3130, BIOS M1XKT45A 08/21/2019
> > > [?? 15.390011] RIP: 0010:ath10k_htt_rx_pop_paddr.isra.0+0xca/0x100 [ath10k_core]
> > > [?? 15.390014] Code: 8b b8 a8 02 00 00 48 8b 87 40 02 00 00 48 85 c0 74 24 48 8b 40 28 48 85 c0 74 14 45 31 c0 b9 02 00 00 00 e8 08 1e 6b fc eb 05 <0f> 0b 45 31 e4 4c 89 e0 41 5c 5d c3 48 8b 05 b3 2d 3d fd 48 85 c0
> > > [?? 15.390016] RSP: 0018:ffffa10d002ecd78 EFLAGS: 00010246
> > > [?? 15.390017] RAX: 0000000000000000 RBX: ffff8d94fd1a4750 RCX: ffff8d952f761e80
> > > [?? 15.390019] RDX: 000000007fee6d00 RSI: ffff8d952f76293c RDI: ffff8d952f762828
> > > [?? 15.390020] RBP: ffffa10d002ecd80 R08: 0000000000200000 R09: ffff8d94fd08b758
> > > [?? 15.390021] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8d94fd1a4748
> > > [?? 15.390022] R13: ffffa10d002ece28 R14: ffff8d952f761e80 R15: ffff8d952f761e80
> > > [?? 15.390024] FS:? 0000000000000000(0000) GS:ffff8d9537b40000(0000) knlGS:0000000000000000
> > > [?? 15.390025] CS:? 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > [?? 15.390026] CR2: 0000561a638de9c0 CR3: 000000023171a000 CR4: 00000000003406e0
> > > [?? 15.390027] Call Trace:
> > > [?? 15.390029]? <IRQ>
> > > [?? 15.390042]? ath10k_htt_txrx_compl_task+0x758/0x14b0 [ath10k_core]
> > > [?? 15.390048]? ath10k_pci_napi_poll+0x56/0x120 [ath10k_pci]
> > > [?? 15.390053]? net_rx_action+0x13a/0x370
> > > [?? 15.390057]? __do_softirq+0xe1/0x2d6
> > > [?? 15.390061]? irq_exit+0xae/0xb0
> > > [?? 15.390064]? do_IRQ+0x5a/0xf0
> > > [?? 15.390067]? common_interrupt+0xf/0xf
> > > [?? 15.390068]? </IRQ>
> > > [?? 15.390072] RIP: 0010:cpuidle_enter_state+0xca/0x3e0
> > > [?? 15.390074] Code: ff e8 8a 56 80 ff 80 7d c7 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 ea 02 00 00 31 ff e8 1d d6 86 ff fb 66 0f 1f 44 00 00 <45> 85 e4 0f 88 3f 02 00 00 49 63 d4 4c 8b 7d d0 4c 2b 7d c8 48 8d
> > > [?? 15.390075] RSP: 0018:ffffa10d0018fe38 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffd9
> > > [?? 15.390077] RAX: ffff8d9537b6ce40 RBX: ffff8d9534a93c00 RCX: 000000000000001f
> > > [?? 15.390078] RDX: 0000000000000000 RSI: 00000000280a5e6f RDI: 0000000000000000
> > > [?? 15.390079] RBP: ffffa10d0018fe78 R08: 00000003954e39cc R09: ffffffffbd977140
> > > [?? 15.390079] R10: ffff8d9537b6bb04 R11: ffff8d9537b6bae4 R12: 0000000000000001
> > > [?? 15.390080] R13: ffffffffbd977140 R14: 0000000000000001 R15: ffff8d9534a93c00
> > > [?? 15.390086]? ? cpuidle_enter_state+0xa6/0x3e0
> > > [?? 15.390089]? cpuidle_enter+0x2e/0x40
> > > [?? 15.390092]? call_cpuidle+0x23/0x40
> > > [?? 15.390094]? do_idle+0x1e7/0x280
> > > [?? 15.390097]? cpu_startup_entry+0x20/0x30
> > > [?? 15.390100]? start_secondary+0x167/0x1c0
> > > [?? 15.390103]? secondary_startup_64+0xa4/0xb0
> > > [?? 15.390106] ---[ end trace 60c3cabcf041b110 ]---
> > > [?? 15.390118] ath10k_pci 0000:02:00.0: failed to pop paddr list: -2
> > > [?? 15.390840] wlp2s0: associated
> > > [?? 19.387476] wlp2s0: deauthenticated from c0:56:27:75:aa:b4 (Reason: 2=PREV_AUTH_NOT_VALID)
> > > [?? 24.377944] wlp2s0: authenticate with c0:56:27:75:aa:b4
> > >
> >
> > I don't immediately see a change that might be responsible for this problem. Since v5.5,
> > possibly, but not since v5.6. That makes me wonder if this is reproducible. Any idea ?
> >
> > Thanks,
> > Guenter
>
> Yeah I didn't see anything obvious either.
>
> I am running into an existing problem. No reason to hold this release
> up for this problem.
Thanks for testing all of these, and hopefully this doesn't act up again
greg k-h
On Tue, Apr 07, 2020 at 08:02:57PM +0100, Jon Hunter wrote:
>
> On 07/04/2020 17:39, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.6.3 release.
> > There are 30 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.3-rc2.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> All tests are passing for Tegra ...
>
> Test results for stable-v5.6:
> 13 builds: 13 pass, 0 fail
> 24 boots: 24 pass, 0 fail
> 40 tests: 40 pass, 0 fail
>
> Linux version: 5.6.3-rc2-gf106acd0db7c
> Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
> tegra194-p2972-0000, tegra20-ventana,
> tegra210-p2371-2180, tegra210-p3450-0000,
> tegra30-cardhu-a04
>
Thanks for testing all of these again :)
greg k-h
On Tue, Apr 07, 2020 at 07:44:54PM -0700, Guenter Roeck wrote:
> On 4/7/20 9:39 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.6.3 release.
> > There are 30 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 155 pass: 155 fail: 0
> Qemu test results:
> total: 428 pass: 428 fail: 0
Thanks for testing all of these and letting me know.
greg k-h
On Tue, 7 Apr 2020 at 22:09, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.6.3 release.
> There are 30 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.3-rc2.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
There are three kernel warnings on stable-rc 5.6 two of them are also
present in Linus's tree.
So these reported issues are not the release blockers.
The Source of these warnings are reported while running kselftests.
1) This warning reported on the mailing list and discussion is active.
Warning reported on x86_64, i386, arm and arm64.
[ 346.741358] kselftest: Running tests in lib
[ 346.872415] test_printf: loaded.
[ 346.876442] BUG: kernel NULL pointer dereference, address: 00000000
[ 346.882703] #PF: supervisor read access in kernel mode
[ 346.887844] #PF: error_code(0x0000) - not-present page
[ 346.892990] *pde = 00000000
[ 346.895877] Oops: 0000 [#1] SMP
[ 346.899025] CPU: 1 PID: 6060 Comm: modprobe Tainted: G W
5.6.3-rc2 #1
[ 346.906772] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.0b 07/27/2017
[ 346.914261] EIP: ida_free+0x61/0x130
ref:
https://lore.kernel.org/linux-kselftest/CAFd5g46Bwd8HS9-xjHLh_rB59Nfw8iAnM6aFe0QPcveewDUT6g@mail.gmail.com/T/#me600a8093338a485291361aaf9439e8b2f08a20f
2) This warning is reported on the mailing list and waiting for response,
warning reported on i386 kernel image running x86_64 device.
[ 166.488084] ------------[ cut here ]------------
[ 166.492749] WARNING: CPU: 2 PID: 1456 at
/usr/src/kernel/kernel/locking/lockdep.c:1119
lockdep_register_key+0xb0/0xf0
[ 166.503357] Modules linked in: algif_hash af_alg
x86_pkg_temp_thermal fuse [last unloaded: test_bpf]
[ 166.512481] CPU: 2 PID: 1456 Comm: ip Not tainted 5.6.3-rc2 #1
[ 166.518306] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.0b 07/27/2017
[ 166.525776] EIP: lockdep_register_key+0xb0/0xf0
ref:
https://lore.kernel.org/netdev/CA+G9fYt7-R-_fVDeiwj=sVvBQ-456Pm1oFFtM5Hm_94nN-tA+w@mail.gmail.com/T/#u
3) This warning is only noticed on stable rc 5.6 and 5.5 seen only on arm64.
This needs to be investigated.
[ 386.349099] kselftest: Running tests in ftrace
[ 393.984018]
[ 393.984290] =============================
[ 393.984781] WARNING: suspicious RCU usage
[ 393.988690] 5.6.3-rc2 #1 Not tainted
[ 393.992679] -----------------------------
[ 393.996327] /usr/src/kernel/include/trace/events/ipi.h:36
suspicious rcu_dereference_check() usage!
[ 394.000241]
[ 394.000241] other info that might help us debug this:
[ 394.000241]
[ 394.009094]
[ 394.009094] RCU used illegally from idle CPU!
[ 394.009094] rcu_scheduler_active = 2, debug_locks = 1
[ 394.017084] RCU used illegally from extended quiescent state!
[ 394.028187] 1 lock held by swapper/3/0:
[ 394.033826] #0: ffff80001237b6a8 (max_trace_lock){....}, at:
check_critical_timing+0x7c/0x1a8
ref:
https://lore.kernel.org/linux-kselftest/CA+G9fYtYRc_mKPDN-Gryw7fhjPNGBUP=KemTXaXR6UBU94M3hw@mail.gmail.com/T/#u
Summary
------------------------------------------------------------------------
kernel: 5.6.3-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.6.y
git commit: f106acd0db7c11e0208a2ecbeb0f7c52fc6c455a
git describe: v5.6.2-31-gf106acd0db7c
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.6-oe/build/v5.6.2-31-gf106acd0db7c
No regressions (compared to build v5.6.2)
No fixes (compared to build v5.6.2)
Ran 22476 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* perf
* v4l2-compliance
* ltp-containers-tests
* ltp-mm-tests
* ltp-open-posix-tests
* ltp-syscalls-tests
* network-basic-tests
* spectre-meltdown-checker-test
--
Linaro LKFT
https://lkft.linaro.org
On Wed, Apr 08, 2020 at 03:16:45PM +0530, Naresh Kamboju wrote:
> On Tue, 7 Apr 2020 at 22:09, Greg Kroah-Hartman
> <[email protected]> wrote:
> >
> > This is the start of the stable review cycle for the 5.6.3 release.
> > There are 30 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu, 09 Apr 2020 15:46:32 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.6.3-rc2.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.6.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.
Thanks for testing all of these and letting me know.
greg k-h