Add device node for RPMH and Global clock controller on Qualcomm
SM4450 platform.
Signed-off-by: Ajit Pandey <[email protected]>
Signed-off-by: Tengfei Fan <[email protected]>
---
arch/arm64/boot/dts/qcom/sm4450.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
index 5e09880f4218..5a8a54b0f6c1 100644
--- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -3,6 +3,8 @@
* Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm4450-gcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -348,6 +350,20 @@
dma-ranges = <0 0 0 0 0x10 0>;
compatible = "simple-bus";
+ gcc: clock-controller@100000 {
+ compatible = "qcom,sm4450-gcc";
+ reg = <0x0 0x00100000 0x0 0x1f4200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&sleep_clk>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -452,6 +468,13 @@
apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
+
+ rpmhcc: clock-controller {
+ compatible = "qcom,sm4450-rpmh-clk";
+ #clock-cells = <1>;
+ clocks = <&xo_board>;
+ clock-names = "xo";
+ };
};
};
--
2.17.1
On 25.09.2023 08:49, Tengfei Fan wrote:
> Add device node for RPMH and Global clock controller on Qualcomm
> SM4450 platform.
>
> Signed-off-by: Ajit Pandey <[email protected]>
> Signed-off-by: Tengfei Fan <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad