2020-11-10 14:38:46

by Amelie Delaunay

Subject: [PATCH 1/1] ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151

Update mdma1 clients channel priority level following stm32-mdma bindings.

Signed-off-by: Amelie Delaunay <[email protected]>
---
arch/arm/boot/dts/stm32mp151.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 719a4276a348..b95c46c82223 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1294,7 +1294,7 @@
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc HASH1>;
resets = <&rcc HASH1_R>;
- dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>;
+ dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
dma-names = "in";
dma-maxburst = <2>;
status = "disabled";
@@ -1358,8 +1358,8 @@
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
- <&mdma1 22 0x10 0x100008 0x0 0x0>;
+ dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
+ <&mdma1 22 0x2 0x100008 0x0 0x0>;
dma-names = "tx", "rx";
clocks = <&rcc QSPI_K>;
resets = <&rcc QSPI_R>;
--
2.17.1

2020-11-17 09:50:50

by Alexandre Torgue

Subject: Re: [PATCH 1/1] ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151

Hi,

On 11/10/20 3:36 PM, Amelie Delaunay wrote:
> Update mdma1 clients channel priority level following stm32-mdma bindings.
>
> Signed-off-by: Amelie Delaunay <[email protected]>
> ---
> arch/arm/boot/dts/stm32mp151.dtsi | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index 719a4276a348..b95c46c82223 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1294,7 +1294,7 @@
> interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&rcc HASH1>;
> resets = <&rcc HASH1_R>;
> - dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>;
> + dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
> dma-names = "in";
> dma-maxburst = <2>;
> status = "disabled";
> @@ -1358,8 +1358,8 @@
> reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
> reg-names = "qspi", "qspi_mm";
> interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> - dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
> - <&mdma1 22 0x10 0x100008 0x0 0x0>;
> + dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
> + <&mdma1 22 0x2 0x100008 0x0 0x0>;
> dma-names = "tx", "rx";
> clocks = <&rcc QSPI_K>;
> resets = <&rcc QSPI_R>;
>

Applied on stm32-next.

Thanks.
Alex