2019-03-27 18:21:35

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 01/87] CIFS: fix POSIX lock leak and invalid ptr deref

From: Aurelien Aptel <[email protected]>

[ Upstream commit bc31d0cdcfbadb6258b45db97e93b1c83822ba33 ]

We have a customer reporting crashes in lock_get_status() with many
"Leaked POSIX lock" messages preceeding the crash.

Leaked POSIX lock on dev=0x0:0x56 ...
Leaked POSIX lock on dev=0x0:0x56 ...
Leaked POSIX lock on dev=0x0:0x56 ...
Leaked POSIX lock on dev=0x0:0x53 ...
Leaked POSIX lock on dev=0x0:0x53 ...
Leaked POSIX lock on dev=0x0:0x53 ...
Leaked POSIX lock on dev=0x0:0x53 ...
POSIX: fl_owner=ffff8900e7b79380 fl_flags=0x1 fl_type=0x1 fl_pid=20709
Leaked POSIX lock on dev=0x0:0x4b ino...
Leaked locks on dev=0x0:0x4b ino=0xf911400000029:
POSIX: fl_owner=ffff89f41c870e00 fl_flags=0x1 fl_type=0x1 fl_pid=19592
stack segment: 0000 [#1] SMP
Modules linked in: binfmt_misc msr tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_gss_krb5 arc4 ecb auth_rpcgss nfsv4 md4 nfs nls_utf8 lockd grace cifs sunrpc ccm dns_resolver fscache af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock xfs libcrc32c sb_edac edac_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg ansi_cprng vmw_balloon aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd joydev pcspkr vmxnet3 i2c_piix4 vmw_vmci shpchp fjes processor button ac btrfs xor raid6_pq sr_mod cdrom ata_generic sd_mod ata_piix vmwgfx crc32c_intel drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm serio_raw ahci libahci drm libata vmw_pvscsi sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4

Supported: Yes
CPU: 6 PID: 28250 Comm: lsof Not tainted 4.4.156-94.64-default #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016
task: ffff88a345f28740 ti: ffff88c74005c000 task.ti: ffff88c74005c000
RIP: 0010:[<ffffffff8125dcab>] [<ffffffff8125dcab>] lock_get_status+0x9b/0x3b0
RSP: 0018:ffff88c74005fd90 EFLAGS: 00010202
RAX: ffff89bde83e20ae RBX: ffff89e870003d18 RCX: 0000000049534f50
RDX: ffffffff81a3541f RSI: ffffffff81a3544e RDI: ffff89bde83e20ae
RBP: 0026252423222120 R08: 0000000020584953 R09: 000000000000ffff
R10: 0000000000000000 R11: ffff88c74005fc70 R12: ffff89e5ca7b1340
R13: 00000000000050e5 R14: ffff89e870003d30 R15: ffff89e5ca7b1340
FS: 00007fafd64be800(0000) GS:ffff89f41fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001c80018 CR3: 000000a522048000 CR4: 0000000000360670
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
0000000000000208 ffffffff81a3d6b6 ffff89e870003d30 ffff89e870003d18
ffff89e5ca7b1340 ffff89f41738d7c0 ffff89e870003d30 ffff89e5ca7b1340
ffffffff8125e08f 0000000000000000 ffff89bc22b67d00 ffff88c74005ff28
Call Trace:
[<ffffffff8125e08f>] locks_show+0x2f/0x70
[<ffffffff81230ad1>] seq_read+0x251/0x3a0
[<ffffffff81275bbc>] proc_reg_read+0x3c/0x70
[<ffffffff8120e456>] __vfs_read+0x26/0x140
[<ffffffff8120e9da>] vfs_read+0x7a/0x120
[<ffffffff8120faf2>] SyS_read+0x42/0xa0
[<ffffffff8161cbc3>] entry_SYSCALL_64_fastpath+0x1e/0xb7

When Linux closes a FD (close(), close-on-exec, dup2(), ...) it calls
filp_close() which also removes all posix locks.

The lock struct is initialized like so in filp_close() and passed
down to cifs

...
lock.fl_type = F_UNLCK;
lock.fl_flags = FL_POSIX | FL_CLOSE;
lock.fl_start = 0;
lock.fl_end = OFFSET_MAX;
...

Note the FL_CLOSE flag, which hints the VFS code that this unlocking
is done for closing the fd.

filp_close()
locks_remove_posix(filp, id);
vfs_lock_file(filp, F_SETLK, &lock, NULL);
return filp->f_op->lock(filp, cmd, fl) => cifs_lock()
rc = cifs_setlk(file, flock, type, wait_flag, posix_lck, lock, unlock, xid);
rc = server->ops->mand_unlock_range(cfile, flock, xid);
if (flock->fl_flags & FL_POSIX && !rc)
rc = locks_lock_file_wait(file, flock)

Notice how we don't call locks_lock_file_wait() which does the
generic VFS lock/unlock/wait work on the inode if rc != 0.

If we are closing the handle, the SMB server is supposed to remove any
locks associated with it. Similarly, cifs.ko frees and wakes up any
lock and lock waiter when closing the file:

cifs_close()
cifsFileInfo_put(file->private_data)
/*
* Delete any outstanding lock records. We'll lose them when the file
* is closed anyway.
*/
down_write(&cifsi->lock_sem);
list_for_each_entry_safe(li, tmp, &cifs_file->llist->locks, llist) {
list_del(&li->llist);
cifs_del_lock_waiters(li);
kfree(li);
}
list_del(&cifs_file->llist->llist);
kfree(cifs_file->llist);
up_write(&cifsi->lock_sem);

So we can safely ignore unlocking failures in cifs_lock() if they
happen with the FL_CLOSE flag hint set as both the server and the
client take care of it during the actual closing.

This is not a proper fix for the unlocking failure but it's safe and
it seems to prevent the lock leakages and crashes the customer
experiences.

Signed-off-by: Aurelien Aptel <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Steve French <[email protected]>
Acked-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/file.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 1c5099fffaec..7d295bf283ca 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1627,8 +1627,20 @@ cifs_setlk(struct file *file, struct file_lock *flock, __u32 type,
rc = server->ops->mand_unlock_range(cfile, flock, xid);

out:
- if (flock->fl_flags & FL_POSIX && !rc)
+ if (flock->fl_flags & FL_POSIX) {
+ /*
+ * If this is a request to remove all locks because we
+ * are closing the file, it doesn't matter if the
+ * unlocking failed as both cifs.ko and the SMB server
+ * remove the lock on file close
+ */
+ if (rc) {
+ cifs_dbg(VFS, "%s failed rc=%d\n", __func__, rc);
+ if (!(flock->fl_flags & FL_CLOSE))
+ return rc;
+ }
rc = locks_lock_file_wait(file, flock);
+ }
return rc;
}

--
2.19.1



2019-03-27 18:21:41

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 04/87] tracing: kdb: Fix ftdump to not sleep

From: Douglas Anderson <[email protected]>

[ Upstream commit 31b265b3baaf55f209229888b7ffea523ddab366 ]

As reported back in 2016-11 [1], the "ftdump" kdb command triggers a
BUG for "sleeping function called from invalid context".

kdb's "ftdump" command wants to call ring_buffer_read_prepare() in
atomic context. A very simple solution for this is to add allocation
flags to ring_buffer_read_prepare() so kdb can call it without
triggering the allocation error. This patch does that.

Note that in the original email thread about this, it was suggested
that perhaps the solution for kdb was to either preallocate the buffer
ahead of time or create our own iterator. I'm hoping that this
alternative of adding allocation flags to ring_buffer_read_prepare()
can be considered since it means I don't need to duplicate more of the
core trace code into "trace_kdb.c" (for either creating my own
iterator or re-preparing a ring allocator whose memory was already
allocated).

NOTE: another option for kdb is to actually figure out how to make it
reuse the existing ftrace_dump() function and totally eliminate the
duplication. This sounds very appealing and actually works (the "sr
z" command can be seen to properly dump the ftrace buffer). The
downside here is that ftrace_dump() fully consumes the trace buffer.
Unless that is changed I'd rather not use it because it means "ftdump
| grep xyz" won't be very useful to search the ftrace buffer since it
will throw away the whole trace on the first grep. A future patch to
dump only the last few lines of the buffer will also be hard to
implement.

[1] https://lkml.kernel.org/r/[email protected]

Link: http://lkml.kernel.org/r/[email protected]

Reported-by: Brian Norris <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/ring_buffer.h | 2 +-
kernel/trace/ring_buffer.c | 5 +++--
kernel/trace/trace.c | 6 ++++--
kernel/trace/trace_kdb.c | 6 ++++--
4 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index 19d0778ec382..121c8f99ecdd 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -125,7 +125,7 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts,
unsigned long *lost_events);

struct ring_buffer_iter *
-ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu);
+ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu, gfp_t flags);
void ring_buffer_read_prepare_sync(void);
void ring_buffer_read_start(struct ring_buffer_iter *iter);
void ring_buffer_read_finish(struct ring_buffer_iter *iter);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index f316e90ad538..5473dcaaca8d 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -4037,6 +4037,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_consume);
* ring_buffer_read_prepare - Prepare for a non consuming read of the buffer
* @buffer: The ring buffer to read from
* @cpu: The cpu buffer to iterate over
+ * @flags: gfp flags to use for memory allocation
*
* This performs the initial preparations necessary to iterate
* through the buffer. Memory is allocated, buffer recording
@@ -4054,7 +4055,7 @@ EXPORT_SYMBOL_GPL(ring_buffer_consume);
* This overall must be paired with ring_buffer_read_finish.
*/
struct ring_buffer_iter *
-ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu)
+ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu, gfp_t flags)
{
struct ring_buffer_per_cpu *cpu_buffer;
struct ring_buffer_iter *iter;
@@ -4062,7 +4063,7 @@ ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu)
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return NULL;

- iter = kmalloc(sizeof(*iter), GFP_KERNEL);
+ iter = kmalloc(sizeof(*iter), flags);
if (!iter)
return NULL;

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index f18dedf9195e..d4773939c054 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -3449,7 +3449,8 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
if (iter->cpu_file == RING_BUFFER_ALL_CPUS) {
for_each_tracing_cpu(cpu) {
iter->buffer_iter[cpu] =
- ring_buffer_read_prepare(iter->trace_buffer->buffer, cpu);
+ ring_buffer_read_prepare(iter->trace_buffer->buffer,
+ cpu, GFP_KERNEL);
}
ring_buffer_read_prepare_sync();
for_each_tracing_cpu(cpu) {
@@ -3459,7 +3460,8 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
} else {
cpu = iter->cpu_file;
iter->buffer_iter[cpu] =
- ring_buffer_read_prepare(iter->trace_buffer->buffer, cpu);
+ ring_buffer_read_prepare(iter->trace_buffer->buffer,
+ cpu, GFP_KERNEL);
ring_buffer_read_prepare_sync();
ring_buffer_read_start(iter->buffer_iter[cpu]);
tracing_iter_reset(iter, cpu);
diff --git a/kernel/trace/trace_kdb.c b/kernel/trace/trace_kdb.c
index 57149bce6aad..896458285fdd 100644
--- a/kernel/trace/trace_kdb.c
+++ b/kernel/trace/trace_kdb.c
@@ -50,14 +50,16 @@ static void ftrace_dump_buf(int skip_lines, long cpu_file)
if (cpu_file == RING_BUFFER_ALL_CPUS) {
for_each_tracing_cpu(cpu) {
iter.buffer_iter[cpu] =
- ring_buffer_read_prepare(iter.trace_buffer->buffer, cpu);
+ ring_buffer_read_prepare(iter.trace_buffer->buffer,
+ cpu, GFP_ATOMIC);
ring_buffer_read_start(iter.buffer_iter[cpu]);
tracing_iter_reset(&iter, cpu);
}
} else {
iter.cpu_file = cpu_file;
iter.buffer_iter[cpu_file] =
- ring_buffer_read_prepare(iter.trace_buffer->buffer, cpu_file);
+ ring_buffer_read_prepare(iter.trace_buffer->buffer,
+ cpu_file, GFP_ATOMIC);
ring_buffer_read_start(iter.buffer_iter[cpu_file]);
tracing_iter_reset(&iter, cpu_file);
}
--
2.19.1


2019-03-27 18:21:50

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 09/87] scsi: hisi_sas: Set PHY linkrate when disconnected

From: John Garry <[email protected]>

[ Upstream commit efdcad62e7b8a02fcccc5ccca57806dce1482ac8 ]

When the PHY comes down, we currently do not set the negotiated linkrate:

root@(none)$ pwd
/sys/class/sas_phy/phy-0:0
root@(none)$ more enable
1
root@(none)$ more negotiated_linkrate
12.0 Gbit
root@(none)$ echo 0 > enable
root@(none)$ more negotiated_linkrate
12.0 Gbit
root@(none)$

This patch fixes the driver code to set it properly when the PHY comes
down.

If the PHY had been enabled, then set unknown; otherwise, flag as disabled.

The logical place to set the negotiated linkrate for this scenario is PHY
down routine, which is called from the PHY down ISR.

However, it is not possible to know if the PHY comes down due to PHY
disable or loss of link, as sas_phy.enabled member is not set until after
the transport disable routine is complete, which races with the PHY down
ISR.

As an imperfect solution, use sas_phy_data.enable as the flag to know if
the PHY is down due to disable. It's imperfect, as sas_phy_data is internal
to libsas.

I can't see another way without adding a new field to hisi_sas_phy and
managing it, or changing SCSI SAS transport.

Signed-off-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 2f872f784e10..5252dd5d3f4b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -10,6 +10,7 @@
*/

#include "hisi_sas.h"
+#include "../libsas/sas_internal.h"
#define DRV_NAME "hisi_sas"

#define DEV_IS_GONE(dev) \
@@ -1128,9 +1129,18 @@ static void hisi_sas_port_deformed(struct asd_sas_phy *sas_phy)

static void hisi_sas_phy_disconnected(struct hisi_sas_phy *phy)
{
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_phy *sphy = sas_phy->phy;
+ struct sas_phy_data *d = sphy->hostdata;
+
phy->phy_attached = 0;
phy->phy_type = 0;
phy->port = NULL;
+
+ if (d->enable)
+ sphy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+ else
+ sphy->negotiated_linkrate = SAS_PHY_DISABLED;
}

void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
--
2.19.1


2019-03-27 18:21:58

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 11/87] mm/page_ext.c: fix an imbalance with kmemleak

From: Qian Cai <[email protected]>

[ Upstream commit 0c81585499601acd1d0e1cbf424cabfaee60628c ]

After offlining a memory block, kmemleak scan will trigger a crash, as
it encounters a page ext address that has already been freed during
memory offlining. At the beginning in alloc_page_ext(), it calls
kmemleak_alloc(), but it does not call kmemleak_free() in
free_page_ext().

BUG: unable to handle kernel paging request at ffff888453d00000
PGD 128a01067 P4D 128a01067 PUD 128a04067 PMD 47e09e067 PTE 800ffffbac2ff060
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 1 PID: 1594 Comm: bash Not tainted 5.0.0-rc8+ #15
Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017
RIP: 0010:scan_block+0xb5/0x290
Code: 85 6e 01 00 00 48 b8 00 00 30 f5 81 88 ff ff 48 39 c3 0f 84 5b 01 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 0f 85 87 01 00 00 <4c> 8b 3b e8 f3 0c fa ff 4c 39 3d 0c 6b 4c 01 0f 87 08 01 00 00 4c
RSP: 0018:ffff8881ec57f8e0 EFLAGS: 00010082
RAX: 0000000000000000 RBX: ffff888453d00000 RCX: ffffffffa61e5a54
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff888453d00000
RBP: ffff8881ec57f920 R08: fffffbfff4ed588d R09: fffffbfff4ed588c
R10: fffffbfff4ed588c R11: ffffffffa76ac463 R12: dffffc0000000000
R13: ffff888453d00ff9 R14: ffff8881f80cef48 R15: ffff8881f80cef48
FS: 00007f6c0e3f8740(0000) GS:ffff8881f7680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888453d00000 CR3: 00000001c4244003 CR4: 00000000001606a0
Call Trace:
scan_gray_list+0x269/0x430
kmemleak_scan+0x5a8/0x10f0
kmemleak_write+0x541/0x6ca
full_proxy_write+0xf8/0x190
__vfs_write+0xeb/0x980
vfs_write+0x15a/0x4f0
ksys_write+0xd2/0x1b0
__x64_sys_write+0x73/0xb0
do_syscall_64+0xeb/0xaaa
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f6c0dad73b8
Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 63 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
RSP: 002b:00007ffd5b863cb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f6c0dad73b8
RDX: 0000000000000005 RSI: 000055a9216e1710 RDI: 0000000000000001
RBP: 000055a9216e1710 R08: 000000000000000a R09: 00007ffd5b863840
R10: 000000000000000a R11: 0000000000000246 R12: 00007f6c0dda9780
R13: 0000000000000005 R14: 00007f6c0dda4740 R15: 0000000000000005
Modules linked in: nls_iso8859_1 nls_cp437 vfat fat kvm_intel kvm irqbypass efivars ip_tables x_tables xfs sd_mod ahci libahci igb i2c_algo_bit libata i2c_core dm_mirror dm_region_hash dm_log dm_mod efivarfs
CR2: ffff888453d00000
---[ end trace ccf646c7456717c5 ]---
Kernel panic - not syncing: Fatal exception
Shutting down cpus with NMI
Kernel Offset: 0x24c00000 from 0xffffffff81000000 (relocation range:
0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Qian Cai <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/page_ext.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/mm/page_ext.c b/mm/page_ext.c
index 121dcffc4ec1..a7be1c7a79f6 100644
--- a/mm/page_ext.c
+++ b/mm/page_ext.c
@@ -286,6 +286,7 @@ static void free_page_ext(void *addr)
table_size = get_entry_size() * PAGES_PER_SECTION;

BUG_ON(PageReserved(page));
+ kmemleak_free(addr);
free_pages_exact(addr, table_size);
}
}
--
2.19.1


2019-03-27 18:22:16

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 24/87] wil6210: check null pointer in _wil_cfg80211_merge_extra_ies

From: Alexei Avshalom Lazar <[email protected]>

[ Upstream commit de77a53c2d1e8fb3621e63e8e1f0f0c9a1a99ff7 ]

ies1 or ies2 might be null when code inside
_wil_cfg80211_merge_extra_ies access them.
Add explicit check for null and make sure ies1/ies2 are not
accessed in such a case.

spos might be null and be accessed inside
_wil_cfg80211_merge_extra_ies.
Add explicit check for null in the while condition statement
and make sure spos is not accessed in such a case.

Signed-off-by: Alexei Avshalom Lazar <[email protected]>
Signed-off-by: Maya Erez <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index d117240d9a73..b8eeaef17edc 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1005,6 +1005,12 @@ static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
u8 *buf, *dpos;
const u8 *spos;

+ if (!ies1)
+ ies1_len = 0;
+
+ if (!ies2)
+ ies2_len = 0;
+
if (ies1_len == 0 && ies2_len == 0) {
*merged_ies = NULL;
*merged_len = 0;
@@ -1014,17 +1020,19 @@ static int _wil_cfg80211_merge_extra_ies(const u8 *ies1, u16 ies1_len,
buf = kmalloc(ies1_len + ies2_len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
- memcpy(buf, ies1, ies1_len);
+ if (ies1)
+ memcpy(buf, ies1, ies1_len);
dpos = buf + ies1_len;
spos = ies2;
- while (spos + 1 < ies2 + ies2_len) {
+ while (spos && (spos + 1 < ies2 + ies2_len)) {
/* IE tag at offset 0, length at offset 1 */
u16 ielen = 2 + spos[1];

if (spos + ielen > ies2 + ies2_len)
break;
if (spos[0] == WLAN_EID_VENDOR_SPECIFIC &&
- !_wil_cfg80211_find_ie(ies1, ies1_len, spos, ielen)) {
+ (!ies1 || !_wil_cfg80211_find_ie(ies1, ies1_len,
+ spos, ielen))) {
memcpy(dpos, spos, ielen);
dpos += ielen;
}
--
2.19.1


2019-03-27 18:22:27

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 32/87] e1000e: Fix -Wformat-truncation warnings

From: Florian Fainelli <[email protected]>

[ Upstream commit 135e7245479addc6b1f5d031e3d7e2ddb3d2b109 ]

Provide precision hints to snprintf() since we know the destination
buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the
following warnings:

drivers/net/ethernet/intel/e1000e/netdev.c: In function
'e1000_request_msix':
drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
"%s-rx-0", netdev->name);
^
drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf'
output between 6 and 21 bytes into a destination of size 20
snprintf(adapter->rx_ring->name,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(adapter->rx_ring->name) - 1,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s-rx-0", netdev->name);
~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf'
output may be truncated before the last format character
[-Wformat-truncation=]
"%s-tx-0", netdev->name);
^
drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf'
output between 6 and 21 bytes into a destination of size 20
snprintf(adapter->tx_ring->name,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(adapter->tx_ring->name) - 1,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s-tx-0", netdev->name);
~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 6855b3380a83..f56f8b6e2378 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2121,7 +2121,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
if (strlen(netdev->name) < (IFNAMSIZ - 5))
snprintf(adapter->rx_ring->name,
sizeof(adapter->rx_ring->name) - 1,
- "%s-rx-0", netdev->name);
+ "%.14s-rx-0", netdev->name);
else
memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
err = request_irq(adapter->msix_entries[vector].vector,
@@ -2137,7 +2137,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter)
if (strlen(netdev->name) < (IFNAMSIZ - 5))
snprintf(adapter->tx_ring->name,
sizeof(adapter->tx_ring->name) - 1,
- "%s-tx-0", netdev->name);
+ "%.14s-tx-0", netdev->name);
else
memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
err = request_irq(adapter->msix_entries[vector].vector,
--
2.19.1


2019-03-27 18:22:33

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 35/87] ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()

From: Takashi Iwai <[email protected]>

[ Upstream commit 8d1667200850f8753c0265fa4bd25c9a6e5f94ce ]

The apq8016 driver leaves the of-node refcount at aborting from the
loop of for_each_child_of_node() in the error path. Not only the
iterator node of for_each_child_of_node(), the children nodes referred
from it for codec and cpu have to be properly unreferenced.

Fixes: bdb052e81f62 ("ASoC: qcom: add apq8016 sound card support")
Cc: Patrick Lai <[email protected]>
Cc: Banajit Goswami <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/qcom/apq8016_sbc.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/sound/soc/qcom/apq8016_sbc.c b/sound/soc/qcom/apq8016_sbc.c
index 07f91e918b23..754742018515 100644
--- a/sound/soc/qcom/apq8016_sbc.c
+++ b/sound/soc/qcom/apq8016_sbc.c
@@ -114,13 +114,15 @@ static struct apq8016_sbc_data *apq8016_sbc_parse_of(struct snd_soc_card *card)

if (!cpu || !codec) {
dev_err(dev, "Can't find cpu/codec DT node\n");
- return ERR_PTR(-EINVAL);
+ ret = -EINVAL;
+ goto error;
}

link->cpu_of_node = of_parse_phandle(cpu, "sound-dai", 0);
if (!link->cpu_of_node) {
dev_err(card->dev, "error getting cpu phandle\n");
- return ERR_PTR(-EINVAL);
+ ret = -EINVAL;
+ goto error;
}

link->codec_of_node = of_parse_phandle(codec, "sound-dai", 0);
@@ -132,28 +134,37 @@ static struct apq8016_sbc_data *apq8016_sbc_parse_of(struct snd_soc_card *card)
ret = snd_soc_of_get_dai_name(cpu, &link->cpu_dai_name);
if (ret) {
dev_err(card->dev, "error getting cpu dai name\n");
- return ERR_PTR(ret);
+ goto error;
}

ret = snd_soc_of_get_dai_name(codec, &link->codec_dai_name);
if (ret) {
dev_err(card->dev, "error getting codec dai name\n");
- return ERR_PTR(ret);
+ goto error;
}

link->platform_of_node = link->cpu_of_node;
ret = of_property_read_string(np, "link-name", &link->name);
if (ret) {
dev_err(card->dev, "error getting codec dai_link name\n");
- return ERR_PTR(ret);
+ goto error;
}

link->stream_name = link->name;
link->init = apq8016_sbc_dai_init;
link++;
+
+ of_node_put(cpu);
+ of_node_put(codec);
}

return data;
+
+ error:
+ of_node_put(np);
+ of_node_put(cpu);
+ of_node_put(codec);
+ return ERR_PTR(ret);
}

static const struct snd_soc_dapm_widget apq8016_sbc_dapm_widgets[] = {
--
2.19.1


2019-03-27 18:22:36

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 27/87] scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c

From: Benjamin Block <[email protected]>

[ Upstream commit 1749ef00f7312679f76d5e9104c5d1e22a829038 ]

We had a test-report where, under memory pressure, adding LUNs to the
systems would fail (the tests add LUNs strictly in sequence):

[ 5525.853432] scsi 0:0:1:1088045124: Direct-Access IBM 2107900 .148 PQ: 0 ANSI: 5
[ 5525.853826] scsi 0:0:1:1088045124: alua: supports implicit TPGS
[ 5525.853830] scsi 0:0:1:1088045124: alua: device naa.6005076303ffd32700000000000044da port group 0 rel port 43
[ 5525.853931] sd 0:0:1:1088045124: Attached scsi generic sg10 type 0
[ 5525.854075] sd 0:0:1:1088045124: [sdk] Disabling DIF Type 1 protection
[ 5525.855495] sd 0:0:1:1088045124: [sdk] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[ 5525.855606] sd 0:0:1:1088045124: [sdk] Write Protect is off
[ 5525.855609] sd 0:0:1:1088045124: [sdk] Mode Sense: ed 00 00 08
[ 5525.855795] sd 0:0:1:1088045124: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5525.857838] sdk: sdk1
[ 5525.859468] sd 0:0:1:1088045124: [sdk] Attached SCSI disk
[ 5525.865073] sd 0:0:1:1088045124: alua: transition timeout set to 60 seconds
[ 5525.865078] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015070] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.015213] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA
[ 5526.587439] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
[ 5526.588562] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured

Looking at the code of scsi_alloc_sdev(), and all the calling contexts,
there seems to be no reason to use GFP_ATMOIC here. All the different
call-contexts use a mutex at some point, and nothing in between that
requires no sleeping, as far as I could see. Additionally, the code that
later allocates the block queue for the device (scsi_mq_alloc_queue())
already uses GFP_KERNEL.

There are similar allocations in two other functions:
scsi_probe_and_add_lun(), and scsi_add_lun(),; that can also be done with
GFP_KERNEL.

Here is the contexts for the three functions so far:

scsi_alloc_sdev()
scsi_probe_and_add_lun()
scsi_sequential_lun_scan()
__scsi_scan_target()
scsi_scan_target()
mutex_lock()
scsi_scan_channel()
scsi_scan_host_selected()
mutex_lock()
scsi_report_lun_scan()
__scsi_scan_target()
...
__scsi_add_device()
mutex_lock()
__scsi_scan_target()
...
scsi_report_lun_scan()
...
scsi_get_host_dev()
mutex_lock()

scsi_probe_and_add_lun()
...

scsi_add_lun()
scsi_probe_and_add_lun()
...

So replace all these, and give them a bit of a better chance to succeed,
with more chances of reclaim.

Signed-off-by: Benjamin Block <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_scan.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 27a6d3c6cb7c..67f6f134abc4 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -219,7 +219,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);

sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
- GFP_ATOMIC);
+ GFP_KERNEL);
if (!sdev)
goto out;

@@ -796,7 +796,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
*/
sdev->inquiry = kmemdup(inq_result,
max_t(size_t, sdev->inquiry_len, 36),
- GFP_ATOMIC);
+ GFP_KERNEL);
if (sdev->inquiry == NULL)
return SCSI_SCAN_NO_RESPONSE;

@@ -1095,7 +1095,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
if (!sdev)
goto out;

- result = kmalloc(result_len, GFP_ATOMIC |
+ result = kmalloc(result_len, GFP_KERNEL |
((shost->unchecked_isa_dma) ? __GFP_DMA : 0));
if (!result)
goto out_free_sdev;
--
2.19.1


2019-03-27 18:22:39

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 39/87] media: sh_veu: Correct return type for mem2mem buffer helpers

From: Ezequiel Garcia <[email protected]>

[ Upstream commit 43c145195c7fc3025ee7ecfc67112ac1c82af7c2 ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/sh_veu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c
index 15a562af13c7..a4f593220ef0 100644
--- a/drivers/media/platform/sh_veu.c
+++ b/drivers/media/platform/sh_veu.c
@@ -276,13 +276,13 @@ static void sh_veu_process(struct sh_veu_dev *veu,
static void sh_veu_device_run(void *priv)
{
struct sh_veu_dev *veu = priv;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;

src_buf = v4l2_m2m_next_src_buf(veu->m2m_ctx);
dst_buf = v4l2_m2m_next_dst_buf(veu->m2m_ctx);

if (src_buf && dst_buf)
- sh_veu_process(veu, src_buf, dst_buf);
+ sh_veu_process(veu, &src_buf->vb2_buf, &dst_buf->vb2_buf);
}

/* ========== video ioctls ========== */
--
2.19.1


2019-03-27 18:22:47

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 43/87] vfs: fix preadv64v2 and pwritev64v2 compat syscalls with offset == -1

From: Aurelien Jarno <[email protected]>

[ Upstream commit cc4b1242d7e3b42eed73881fc749944146493e4f ]

The preadv2 and pwritev2 syscalls are supposed to emulate the readv and
writev syscalls when offset == -1. Therefore the compat code should
check for offset before calling do_compat_preadv64 and
do_compat_pwritev64. This is the case for the preadv2 and pwritev2
syscalls, but handling of offset == -1 is missing in their 64-bit
equivalent.

This patch fixes that, calling do_compat_readv and do_compat_writev when
offset == -1. This fixes the following glibc tests on x32:
- misc/tst-preadvwritev2
- misc/tst-preadvwritev64v2

Cc: Alexander Viro <[email protected]>
Cc: H.J. Lu <[email protected]>
Signed-off-by: Aurelien Jarno <[email protected]>
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/read_write.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/fs/read_write.c b/fs/read_write.c
index 9819f7c6c8c5..6ab67b860159 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -1204,6 +1204,9 @@ COMPAT_SYSCALL_DEFINE5(preadv64v2, unsigned long, fd,
const struct compat_iovec __user *,vec,
unsigned long, vlen, loff_t, pos, int, flags)
{
+ if (pos == -1)
+ return do_compat_readv(fd, vec, vlen, flags);
+
return do_compat_preadv64(fd, vec, vlen, pos, flags);
}
#endif
@@ -1310,6 +1313,9 @@ COMPAT_SYSCALL_DEFINE5(pwritev64v2, unsigned long, fd,
const struct compat_iovec __user *,vec,
unsigned long, vlen, loff_t, pos, int, flags)
{
+ if (pos == -1)
+ return do_compat_writev(fd, vec, vlen, flags);
+
return do_compat_pwritev64(fd, vec, vlen, pos, flags);
}
#endif
--
2.19.1


2019-03-27 18:22:50

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 03/87] i2c: sis630: correct format strings

From: Louis Taylor <[email protected]>

[ Upstream commit 60f7691c624b41a05bfc3493d9b0519e7951b7ef ]

When compiling with -Wformat, clang warns:

drivers/i2c/busses/i2c-sis630.c:482:4: warning: format specifies type
'unsigned short' but the argument has type 'int' [-Wformat]
smbus_base + SMB_STS,
^~~~~~~~~~~~~~~~~~~~

drivers/i2c/busses/i2c-sis630.c:483:4: warning: format specifies type
'unsigned short' but the argument has type 'int' [-Wformat]
smbus_base + SMB_STS + SIS630_SMB_IOREGION - 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

drivers/i2c/busses/i2c-sis630.c:531:37: warning: format specifies type
'unsigned short' but the argument has type 'int' [-Wformat]
"SMBus SIS630 adapter at %04hx", smbus_base + SMB_STS);
~~~~~ ^~~~~~~~~~~~~~~~~~~~

This patch fixes the format strings to use the format type for int.

Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Louis Taylor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-sis630.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 1e6805b5cef2..a57aa4fe51a4 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -478,7 +478,7 @@ static int sis630_setup(struct pci_dev *sis630_dev)
if (!request_region(smbus_base + SMB_STS, SIS630_SMB_IOREGION,
sis630_driver.name)) {
dev_err(&sis630_dev->dev,
- "I/O Region 0x%04hx-0x%04hx for SMBus already in use.\n",
+ "I/O Region 0x%04x-0x%04x for SMBus already in use.\n",
smbus_base + SMB_STS,
smbus_base + SMB_STS + SIS630_SMB_IOREGION - 1);
retval = -EBUSY;
@@ -528,7 +528,7 @@ static int sis630_probe(struct pci_dev *dev, const struct pci_device_id *id)
sis630_adapter.dev.parent = &dev->dev;

snprintf(sis630_adapter.name, sizeof(sis630_adapter.name),
- "SMBus SIS630 adapter at %04hx", smbus_base + SMB_STS);
+ "SMBus SIS630 adapter at %04x", smbus_base + SMB_STS);

return i2c_add_adapter(&sis630_adapter);
}
--
2.19.1


2019-03-27 18:22:53

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 47/87] ACPI / video: Refactor and fix dmi_is_desktop()

From: Hans de Goede <[email protected]>

[ Upstream commit cecf3e3e0803462335e25d083345682518097334 ]

This commit refactors the chassis-type detection introduced by
commit 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") (where desktop means anything without a builtin
screen).

The DMI chassis_type is an unsigned integer, so rather then doing a
whole bunch of string-compares on it, convert it to an int and feed
the result to a switch case.

Note the switch case uses hex values, this is done because the spec
uses hex values too. This changes the check for "Main Server Chassis"
from checking for 11 decimal to 11 hexadecimal, this is a bug fix,
the original check for 11 decimal was wrong.

Fixes: 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <[email protected]>
[ rjw: Drop redundant return statements ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpi_video.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index 667dc5c86fef..d79e38abd6d9 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -2069,21 +2069,28 @@ static int __init intel_opregion_present(void)
return opregion;
}

+/* Check if the chassis-type indicates there is no builtin LCD panel */
static bool dmi_is_desktop(void)
{
const char *chassis_type;
+ unsigned long type;

chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
if (!chassis_type)
return false;

- if (!strcmp(chassis_type, "3") || /* 3: Desktop */
- !strcmp(chassis_type, "4") || /* 4: Low Profile Desktop */
- !strcmp(chassis_type, "5") || /* 5: Pizza Box */
- !strcmp(chassis_type, "6") || /* 6: Mini Tower */
- !strcmp(chassis_type, "7") || /* 7: Tower */
- !strcmp(chassis_type, "11")) /* 11: Main Server Chassis */
+ if (kstrtoul(chassis_type, 10, &type) != 0)
+ return false;
+
+ switch (type) {
+ case 0x03: /* Desktop */
+ case 0x04: /* Low Profile Desktop */
+ case 0x05: /* Pizza Box */
+ case 0x06: /* Mini Tower */
+ case 0x07: /* Tower */
+ case 0x11: /* Main Server Chassis */
return true;
+ }

return false;
}
--
2.19.1


2019-03-27 18:22:56

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 05/87] gpio: gpio-omap: fix level interrupt idling

From: Russell King <[email protected]>

[ Upstream commit d01849f7deba81f4959fd9e51bf20dbf46987d1c ]

Tony notes that the GPIO module does not idle when level interrupts are
in use, as the wakeup appears to get stuck.

After extensive investigation, it appears that the wakeup will only be
cleared if the interrupt status register is cleared while the interrupt
is enabled. However, we are currently clearing it with the interrupt
disabled for level-based interrupts.

It is acknowledged that this observed behaviour conflicts with a
statement in the TRM:

CAUTION
After servicing the interrupt, the status bit in the interrupt status
register (GPIOi.GPIO_IRQSTATUS_0 or GPIOi.GPIO_IRQSTATUS_1) must be
reset and the interrupt line released (by setting the corresponding
bit of the interrupt status register to 1) before enabling an
interrupt for the GPIO channel in the interrupt-enable register
(GPIOi.GPIO_IRQSTATUS_SET_0 or GPIOi.GPIO_IRQSTATUS_SET_1) to prevent
the occurrence of unexpected interrupts when enabling an interrupt
for the GPIO channel.

However, this does not appear to be a practical problem.

Further, as reported by Grygorii Strashko <[email protected]>,
the TI Android kernel tree has an earlier similar patch as "GPIO: OMAP:
Fix the sequence to clear the IRQ status" saying:

if the status is cleared after disabling the IRQ then sWAKEUP will not
be cleared and gates the module transition

When we unmask the level interrupt after the interrupt has been handled,
enable the interrupt and only then clear the interrupt. If the interrupt
is still pending, the hardware will re-assert the interrupt status.

Should the caution note in the TRM prove to be a problem, we could
use a clear-enable-clear sequence instead.

Cc: Aaro Koskinen <[email protected]>
Cc: Keerthy <[email protected]>
Cc: Peter Ujfalusi <[email protected]>
Signed-off-by: Russell King <[email protected]>
[[email protected]: updated comments based on an earlier TI patch]
Signed-off-by: Tony Lindgren <[email protected]>
Acked-by: Grygorii Strashko <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-omap.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 6f9c9ac6ee70..75f30a0c418a 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -837,14 +837,16 @@ static void omap_gpio_unmask_irq(struct irq_data *d)
if (trigger)
omap_set_gpio_triggering(bank, offset, trigger);

- /* For level-triggered GPIOs, the clearing must be done after
- * the HW source is cleared, thus after the handler has run */
- if (bank->level_mask & BIT(offset)) {
- omap_set_gpio_irqenable(bank, offset, 0);
+ omap_set_gpio_irqenable(bank, offset, 1);
+
+ /*
+ * For level-triggered GPIOs, clearing must be done after the source
+ * is cleared, thus after the handler has run. OMAP4 needs this done
+ * after enabing the interrupt to clear the wakeup status.
+ */
+ if (bank->level_mask & BIT(offset))
omap_clear_gpio_irqstatus(bank, offset);
- }

- omap_set_gpio_irqenable(bank, offset, 1);
raw_spin_unlock_irqrestore(&bank->lock, flags);
}

--
2.19.1


2019-03-27 18:23:01

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 06/87] include/linux/relay.h: fix percpu annotation in struct rchan

From: Luc Van Oostenryck <[email protected]>

[ Upstream commit 62461ac2e5b6520b6d65fc6d7d7b4b8df4b848d8 ]

The percpu member of this structure is declared as:
struct ... ** __percpu member;
So its type is:
__percpu pointer to pointer to struct ...

But looking at how it's used, its type should be:
pointer to __percpu pointer to struct ...
and it should thus be declared as:
struct ... * __percpu *member;

So fix the placement of '__percpu' in the definition of this
structures.

This silents a few Sparse's warnings like:
warning: incorrect type in initializer (different address spaces)
expected void const [noderef] <asn:3> *__vpp_verify
got struct sched_domain **

Link: http://lkml.kernel.org/r/[email protected]
Fixes: 017c59c042d01 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Signed-off-by: Luc Van Oostenryck <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/relay.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/relay.h b/include/linux/relay.h
index 68c1448e56bb..2560f8706408 100644
--- a/include/linux/relay.h
+++ b/include/linux/relay.h
@@ -65,7 +65,7 @@ struct rchan
struct kref kref; /* channel refcount */
void *private_data; /* for user-defined data */
size_t last_toobig; /* tried to log event > subbuf size */
- struct rchan_buf ** __percpu buf; /* per-cpu channel buffers */
+ struct rchan_buf * __percpu *buf; /* per-cpu channel buffers */
int is_global; /* One global buffer ? */
struct list_head list; /* for channel list */
struct dentry *parent; /* parent dentry passed to open */
--
2.19.1


2019-03-27 18:23:07

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 51/87] usb: f_fs: Avoid crash due to out-of-scope stack ptr access

From: John Stultz <[email protected]>

[ Upstream commit 54f64d5c983f939901dacc8cfc0983727c5c742e ]

Since the 5.0 merge window opened, I've been seeing frequent
crashes on suspend and reboot with the trace:

[ 36.911170] Unable to handle kernel paging request at virtual address ffffff801153d660
[ 36.912769] Unable to handle kernel paging request at virtual address ffffff800004b564
...
[ 36.950666] Call trace:
[ 36.950670] queued_spin_lock_slowpath+0x1cc/0x2c8
[ 36.950681] _raw_spin_lock_irqsave+0x64/0x78
[ 36.950692] complete+0x28/0x70
[ 36.950703] ffs_epfile_io_complete+0x3c/0x50
[ 36.950713] usb_gadget_giveback_request+0x34/0x108
[ 36.950721] dwc3_gadget_giveback+0x50/0x68
[ 36.950723] dwc3_thread_interrupt+0x358/0x1488
[ 36.950731] irq_thread_fn+0x30/0x88
[ 36.950734] irq_thread+0x114/0x1b0
[ 36.950739] kthread+0x104/0x130
[ 36.950747] ret_from_fork+0x10/0x1c

I isolated this down to in ffs_epfile_io():
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/usb/gadget/function/f_fs.c#n1065

Where the completion done is setup on the stack:
DECLARE_COMPLETION_ONSTACK(done);

Then later we setup a request and queue it, and wait for it:
if (unlikely(wait_for_completion_interruptible(&done))) {
/*
* To avoid race condition with ffs_epfile_io_complete,
* dequeue the request first then check
* status. usb_ep_dequeue API should guarantee no race
* condition with req->complete callback.
*/
usb_ep_dequeue(ep->ep, req);
interrupted = ep->status < 0;
}

The problem is, that we end up being interrupted, dequeue the
request, and exit.

But then the irq triggers and we try calling complete() on the
context pointer which points to now random stack space, which
results in the panic.

Alan Stern pointed out there is a bug here, in that the snippet
above "assumes that usb_ep_dequeue() waits until the request has
been completed." And that:

wait_for_completion(&done);

Is needed right after the usb_ep_dequeue().

Thus this patch implements that change. With it I no longer see
the crashes on suspend or reboot.

This issue seems to have been uncovered by behavioral changes in
the dwc3 driver in commit fec9095bdef4e ("usb: dwc3: gadget:
remove wait_end_transfer").

Cc: Alan Stern <[email protected]>
Cc: Felipe Balbi <[email protected]>
Cc: Zeng Tao <[email protected]>
Cc: Jack Pham <[email protected]>
Cc: Thinh Nguyen <[email protected]>
Cc: Chen Yu <[email protected]>
Cc: Jerry Zhang <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Vincent Pelletier <[email protected]>
Cc: Andrzej Pietrasiewicz <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Linux USB List <[email protected]>
Suggested-by: Alan Stern <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/function/f_fs.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 04eb64381d92..927ac0ee09b7 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1008,6 +1008,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
* condition with req->complete callback.
*/
usb_ep_dequeue(ep->ep, req);
+ wait_for_completion(&done);
interrupted = ep->status < 0;
}

--
2.19.1


2019-03-27 18:23:11

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 49/87] ARM: 8833/1: Ensure that NEON code always compiles with Clang

From: Nathan Chancellor <[email protected]>

[ Upstream commit de9c0d49d85dc563549972edc5589d195cd5e859 ]

While building arm32 allyesconfig, I ran into the following errors:

arch/arm/lib/xor-neon.c:17:2: error: You should compile this file with
'-mfloat-abi=softfp -mfpu=neon'

In file included from lib/raid6/neon1.c:27:
/home/nathan/cbl/prebuilt/lib/clang/8.0.0/include/arm_neon.h:28:2:
error: "NEON support not enabled"

Building V=1 showed NEON_FLAGS getting passed along to Clang but
__ARM_NEON__ was not getting defined. Ultimately, it boils down to Clang
only defining __ARM_NEON__ when targeting armv7, rather than armv6k,
which is the '-march' value for allyesconfig.

>From lib/Basic/Targets/ARM.cpp in the Clang source:

// This only gets set when Neon instructions are actually available, unlike
// the VFP define, hence the soft float and arch check. This is subtly
// different from gcc, we follow the intent which was that it should be set
// when Neon instructions are actually available.
if ((FPU & NeonFPU) && !SoftFloat && ArchVersion >= 7) {
Builder.defineMacro("__ARM_NEON", "1");
Builder.defineMacro("__ARM_NEON__");
// current AArch32 NEON implementations do not support double-precision
// floating-point even when it is present in VFP.
Builder.defineMacro("__ARM_NEON_FP",
"0x" + Twine::utohexstr(HW_FP & ~HW_FP_DP));
}

Ard Biesheuvel recommended explicitly adding '-march=armv7-a' at the
beginning of the NEON_FLAGS definitions so that __ARM_NEON__ always gets
definined by Clang. This doesn't functionally change anything because
that code will only run where NEON is supported, which is implicitly
armv7.

Link: https://github.com/ClangBuiltLinux/linux/issues/287

Suggested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Stefan Agner <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/arm/kernel_mode_neon.txt | 4 ++--
arch/arm/lib/Makefile | 2 +-
arch/arm/lib/xor-neon.c | 2 +-
lib/raid6/Makefile | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/arm/kernel_mode_neon.txt b/Documentation/arm/kernel_mode_neon.txt
index 525452726d31..b9e060c5b61e 100644
--- a/Documentation/arm/kernel_mode_neon.txt
+++ b/Documentation/arm/kernel_mode_neon.txt
@@ -6,7 +6,7 @@ TL;DR summary
* Use only NEON instructions, or VFP instructions that don't rely on support
code
* Isolate your NEON code in a separate compilation unit, and compile it with
- '-mfpu=neon -mfloat-abi=softfp'
+ '-march=armv7-a -mfpu=neon -mfloat-abi=softfp'
* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your
NEON code
* Don't sleep in your NEON code, and be aware that it will be executed with
@@ -87,7 +87,7 @@ instructions appearing in unexpected places if no special care is taken.
Therefore, the recommended and only supported way of using NEON/VFP in the
kernel is by adhering to the following rules:
* isolate the NEON code in a separate compilation unit and compile it with
- '-mfpu=neon -mfloat-abi=softfp';
+ '-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
into the unit containing the NEON code from a compilation unit which is *not*
built with the GCC flag '-mfpu=neon' set.
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 27f4d96258a2..b3ecffb76c3f 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -38,7 +38,7 @@ $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
$(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S

ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
- NEON_FLAGS := -mfloat-abi=softfp -mfpu=neon
+ NEON_FLAGS := -march=armv7-a -mfloat-abi=softfp -mfpu=neon
CFLAGS_xor-neon.o += $(NEON_FLAGS)
obj-$(CONFIG_XOR_BLOCKS) += xor-neon.o
endif
diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
index 2c40aeab3eaa..c691b901092f 100644
--- a/arch/arm/lib/xor-neon.c
+++ b/arch/arm/lib/xor-neon.c
@@ -14,7 +14,7 @@
MODULE_LICENSE("GPL");

#ifndef __ARM_NEON__
-#error You should compile this file with '-mfloat-abi=softfp -mfpu=neon'
+#error You should compile this file with '-march=armv7-a -mfloat-abi=softfp -mfpu=neon'
#endif

/*
diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile
index 3057011f5599..10ca69475611 100644
--- a/lib/raid6/Makefile
+++ b/lib/raid6/Makefile
@@ -24,7 +24,7 @@ endif
ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
NEON_FLAGS := -ffreestanding
ifeq ($(ARCH),arm)
-NEON_FLAGS += -mfloat-abi=softfp -mfpu=neon
+NEON_FLAGS += -march=armv7-a -mfloat-abi=softfp -mfpu=neon
endif
ifeq ($(ARCH),arm64)
CFLAGS_REMOVE_neon1.o += -mgeneral-regs-only
--
2.19.1


2019-03-27 18:23:12

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 54/87] bcache: improve sysfs_strtoul_clamp()

From: Coly Li <[email protected]>

[ Upstream commit 596b5a5dd1bc2fa019fdaaae522ef331deef927f ]

Currently sysfs_strtoul_clamp() is defined as,
82 #define sysfs_strtoul_clamp(file, var, min, max) \
83 do { \
84 if (attr == &sysfs_ ## file) \
85 return strtoul_safe_clamp(buf, var, min, max) \
86 ?: (ssize_t) size; \
87 } while (0)

The problem is, if bit width of var is less then unsigned long, min and
max may not protect var from integer overflow, because overflow happens
in strtoul_safe_clamp() before checking min and max.

To fix such overflow in sysfs_strtoul_clamp(), to make min and max take
effect, this patch adds an unsigned long variable, and uses it to macro
strtoul_safe_clamp() to convert an unsigned long value in range defined
by [min, max]. Then assign this value to var. By this method, if bit
width of var is less than unsigned long, integer overflow won't happen
before min and max are checking.

Now sysfs_strtoul_clamp() can properly handle smaller data type like
unsigned int, of cause min and max should be defined in range of
unsigned int too.

Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/bcache/sysfs.h | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/md/bcache/sysfs.h b/drivers/md/bcache/sysfs.h
index 0526fe92a683..e7a3c12aa66f 100644
--- a/drivers/md/bcache/sysfs.h
+++ b/drivers/md/bcache/sysfs.h
@@ -80,9 +80,16 @@ do { \

#define sysfs_strtoul_clamp(file, var, min, max) \
do { \
- if (attr == &sysfs_ ## file) \
- return strtoul_safe_clamp(buf, var, min, max) \
- ?: (ssize_t) size; \
+ if (attr == &sysfs_ ## file) { \
+ unsigned long v = 0; \
+ ssize_t ret; \
+ ret = strtoul_safe_clamp(buf, v, min, max); \
+ if (!ret) { \
+ var = v; \
+ return size; \
+ } \
+ return ret; \
+ } \
} while (0)

#define strtoul_or_return(cp) \
--
2.19.1


2019-03-27 18:23:23

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 22/87] fs: fix guard_bio_eod to check for real EOD errors

From: Carlos Maiolino <[email protected]>

[ Upstream commit dce30ca9e3b676fb288c33c1f4725a0621361185 ]

guard_bio_eod() can truncate a segment in bio to allow it to do IO on
odd last sectors of a device.

It already checks if the IO starts past EOD, but it does not consider
the possibility of an IO request starting within device boundaries can
contain more than one segment past EOD.

In such cases, truncated_bytes can be bigger than PAGE_SIZE, and will
underflow bvec->bv_len.

Fix this by checking if truncated_bytes is lower than PAGE_SIZE.

This situation has been found on filesystems such as isofs and vfat,
which doesn't check the device size before mount, if the device is
smaller than the filesystem itself, a readahead on such filesystem,
which spans EOD, can trigger this situation, leading a call to
zero_user() with a wrong size possibly corrupting memory.

I didn't see any crash, or didn't let the system run long enough to
check if memory corruption will be hit somewhere, but adding
instrumentation to guard_bio_end() to check truncated_bytes size, was
enough to see the error.

The following script can trigger the error.

MNT=/mnt
IMG=./DISK.img
DEV=/dev/loop0

mkfs.vfat $IMG
mount $IMG $MNT
cp -R /etc $MNT &> /dev/null
umount $MNT

losetup -D

losetup --find --show --sizelimit 16247280 $IMG
mount $DEV $MNT

find $MNT -type f -exec cat {} + >/dev/null

Kudos to Eric Sandeen for coming up with the reproducer above

Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Carlos Maiolino <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/buffer.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/fs/buffer.c b/fs/buffer.c
index e0d46d47e358..a89be9741d12 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -3041,6 +3041,13 @@ void guard_bio_eod(int op, struct bio *bio)
/* Uhhuh. We've got a bio that straddles the device size! */
truncated_bytes = bio->bi_iter.bi_size - (maxsector << 9);

+ /*
+ * The bio contains more than one segment which spans EOD, just return
+ * and let IO layer turn it into an EIO
+ */
+ if (truncated_bytes > bvec->bv_len)
+ return;
+
/* Truncate the bio.. */
bio->bi_iter.bi_size -= truncated_bytes;
bvec->bv_len -= truncated_bytes;
--
2.19.1


2019-03-27 18:23:25

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 62/87] efi/memattr: Don't bail on zero VA if it equals the region's PA

From: Ard Biesheuvel <[email protected]>

[ Upstream commit 5de0fef0230f3c8d75cff450a71740a7bf2db866 ]

The EFI memory attributes code cross-references the EFI memory map with
the more granular EFI memory attributes table to ensure that they are in
sync before applying the strict permissions to the regions it describes.

Since we always install virtual mappings for the EFI runtime regions to
which these strict permissions apply, we currently perform a sanity check
on the EFI memory descriptor, and ensure that the EFI_MEMORY_RUNTIME bit
is set, and that the virtual address has been assigned.

However, in cases where a runtime region exists at physical address 0x0,
and the virtual mapping equals the physical mapping, e.g., when running
in mixed mode on x86, we encounter a memory descriptor with the runtime
attribute and virtual address 0x0, and incorrectly draw the conclusion
that a runtime region exists for which no virtual mapping was installed,
and give up altogether. The consequence of this is that firmware mappings
retain their read-write-execute permissions, making the system more
vulnerable to attacks.

So let's only bail if the virtual address of 0x0 has been assigned to a
physical region that does not reside at address 0x0.

Signed-off-by: Ard Biesheuvel <[email protected]>
Acked-by: Sai Praneeth Prakhya <[email protected]>
Cc: AKASHI Takahiro <[email protected]>
Cc: Alexander Graf <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Jeffrey Hugo <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: Leif Lindholm <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Peter Jones <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 10f0d2f577053 ("efi: Implement generic support for the Memory ...")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/efi/memattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/efi/memattr.c b/drivers/firmware/efi/memattr.c
index 236004b9a50d..9faa09e7c31f 100644
--- a/drivers/firmware/efi/memattr.c
+++ b/drivers/firmware/efi/memattr.c
@@ -93,7 +93,7 @@ static bool entry_is_valid(const efi_memory_desc_t *in, efi_memory_desc_t *out)

if (!(md->attribute & EFI_MEMORY_RUNTIME))
continue;
- if (md->virt_addr == 0) {
+ if (md->virt_addr == 0 && md->phys_addr != 0) {
/* no virtual mapping has been installed by the stub */
break;
}
--
2.19.1


2019-03-27 18:23:41

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 68/87] powerpc/pseries: Perform full re-add of CPU for topology update post-migration

From: Nathan Fontenot <[email protected]>

[ Upstream commit 81b61324922c67f73813d8a9c175f3c153f6a1c6 ]

On pseries systems, performing a partition migration can result in
altering the nodes a CPU is assigned to on the destination system. For
exampl, pre-migration on the source system CPUs are in node 1 and 3,
post-migration on the destination system CPUs are in nodes 2 and 3.

Handling the node change for a CPU can cause corruption in the slab
cache if we hit a timing where a CPUs node is changed while cache_reap()
is invoked. The corruption occurs because the slab cache code appears
to rely on the CPU and slab cache pages being on the same node.

The current dynamic updating of a CPUs node done in arch/powerpc/mm/numa.c
does not prevent us from hitting this scenario.

Changing the device tree property update notification handler that
recognizes an affinity change for a CPU to do a full DLPAR remove and
add of the CPU instead of dynamically changing its node resolves this
issue.

Signed-off-by: Nathan Fontenot <[email protected]>
Signed-off-by: Michael W. Bringmann <[email protected]>
Tested-by: Michael W. Bringmann <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/topology.h | 2 ++
arch/powerpc/mm/numa.c | 9 +--------
arch/powerpc/platforms/pseries/hotplug-cpu.c | 19 +++++++++++++++++++
3 files changed, 22 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 8b3b46b7b0f2..229c91bcf616 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -90,6 +90,8 @@ static inline int prrn_is_enabled(void)
#define topology_sibling_cpumask(cpu) (per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (per_cpu(cpu_core_map, cpu))
#define topology_core_id(cpu) (cpu_to_core_id(cpu))
+
+int dlpar_cpu_readd(int cpu);
#endif
#endif

diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 0ef83c274019..9cad2ed812ab 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1540,13 +1540,6 @@ static void reset_topology_timer(void)

#ifdef CONFIG_SMP

-static void stage_topology_update(int core_id)
-{
- cpumask_or(&cpu_associativity_changes_mask,
- &cpu_associativity_changes_mask, cpu_sibling_mask(core_id));
- reset_topology_timer();
-}
-
static int dt_update_callback(struct notifier_block *nb,
unsigned long action, void *data)
{
@@ -1559,7 +1552,7 @@ static int dt_update_callback(struct notifier_block *nb,
!of_prop_cmp(update->prop->name, "ibm,associativity")) {
u32 core_id;
of_property_read_u32(update->dn, "reg", &core_id);
- stage_topology_update(core_id);
+ rc = dlpar_cpu_readd(core_id);
rc = NOTIFY_OK;
}
break;
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index a1b63e00b2f7..7a2beedb9740 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -785,6 +785,25 @@ static int dlpar_cpu_add_by_count(u32 cpus_to_add)
return rc;
}

+int dlpar_cpu_readd(int cpu)
+{
+ struct device_node *dn;
+ struct device *dev;
+ u32 drc_index;
+ int rc;
+
+ dev = get_cpu_device(cpu);
+ dn = dev->of_node;
+
+ rc = of_property_read_u32(dn, "ibm,my-drc-index", &drc_index);
+
+ rc = dlpar_cpu_remove_by_index(drc_index);
+ if (!rc)
+ rc = dlpar_cpu_add(drc_index);
+
+ return rc;
+}
+
int dlpar_cpu(struct pseries_hp_errorlog *hp_elog)
{
u32 count, drc_index;
--
2.19.1


2019-03-27 18:23:43

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 31/87] mmc: omap: fix the maximum timeout setting

From: Aaro Koskinen <[email protected]>

[ Upstream commit a6327b5e57fdc679c842588c3be046c0b39cc127 ]

When running OMAP1 kernel on QEMU, MMC access is annoyingly noisy:

MMC: CTO of 0xff and 0xfe cannot be used!
MMC: CTO of 0xff and 0xfe cannot be used!
MMC: CTO of 0xff and 0xfe cannot be used!
[ad inf.]

Emulator warnings appear to be valid. The TI document SPRU680 [1]
("OMAP5910 Dual-Core Processor MultiMedia Card/Secure Data Memory Card
(MMC/SD) Reference Guide") page 36 states that the maximum timeout is 253
cycles and "0xff and 0xfe cannot be used".

Fix by using 0xfd as the maximum timeout.

Tested using QEMU 2.5 (Siemens SX1 machine, OMAP310), and also checked on
real hardware using Palm TE (OMAP310), Nokia 770 (OMAP1710) and Nokia N810
(OMAP2420) that MMC works as before.

[1] http://www.ti.com/lit/ug/spru680/spru680.pdf

Fixes: 730c9b7e6630f ("[MMC] Add OMAP MMC host driver")
Signed-off-by: Aaro Koskinen <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/mmc/host/omap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index a4bf14e21b5e..21dfce21aa63 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -920,7 +920,7 @@ static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_reques
reg &= ~(1 << 5);
OMAP_MMC_WRITE(host, SDIO, reg);
/* Set maximum timeout */
- OMAP_MMC_WRITE(host, CTO, 0xff);
+ OMAP_MMC_WRITE(host, CTO, 0xfd);
}

static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req)
--
2.19.1


2019-03-27 18:23:56

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 41/87] media: s5p-g2d: Correct return type for mem2mem buffer helpers

From: Ezequiel Garcia <[email protected]>

[ Upstream commit 30fa627b32230737bc3f678067e2adfecf956987 ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/s5p-g2d/g2d.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c
index 62c0dec30b59..5f6ccf492111 100644
--- a/drivers/media/platform/s5p-g2d/g2d.c
+++ b/drivers/media/platform/s5p-g2d/g2d.c
@@ -498,7 +498,7 @@ static void device_run(void *prv)
{
struct g2d_ctx *ctx = prv;
struct g2d_dev *dev = ctx->dev;
- struct vb2_buffer *src, *dst;
+ struct vb2_v4l2_buffer *src, *dst;
unsigned long flags;
u32 cmd = 0;

@@ -513,10 +513,10 @@ static void device_run(void *prv)
spin_lock_irqsave(&dev->ctrl_lock, flags);

g2d_set_src_size(dev, &ctx->in);
- g2d_set_src_addr(dev, vb2_dma_contig_plane_dma_addr(src, 0));
+ g2d_set_src_addr(dev, vb2_dma_contig_plane_dma_addr(&src->vb2_buf, 0));

g2d_set_dst_size(dev, &ctx->out);
- g2d_set_dst_addr(dev, vb2_dma_contig_plane_dma_addr(dst, 0));
+ g2d_set_dst_addr(dev, vb2_dma_contig_plane_dma_addr(&dst->vb2_buf, 0));

g2d_set_rop4(dev, ctx->rop);
g2d_set_flip(dev, ctx->flip);
--
2.19.1


2019-03-27 18:23:57

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 37/87] perf test: Fix failure of 'evsel-tp-sched' test on s390

From: Thomas Richter <[email protected]>

[ Upstream commit 03d309711d687460d1345de8a0363f45b1c8cd11 ]

Commit 489338a717a0 ("perf tests evsel-tp-sched: Fix bitwise operator")
causes test case 14 "Parse sched tracepoints fields" to fail on s390.

This test succeeds on x86.

In fact this test now fails on all architectures with type char treated
as type unsigned char.

The root cause is the signed-ness of character arrays in the tracepoints
sched_switch for structure members prev_comm and next_comm.

On s390 the output of:

[root@m35lp76 perf]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 287
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
...
field:char prev_comm[16]; offset:8; size:16; signed:0;
...
field:char next_comm[16]; offset:40; size:16; signed:0;

reveals the character arrays prev_comm and next_comm are per
default unsigned char and have values in the range of 0..255.

On x86 both fields are signed as this output shows:
[root@f29]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 287
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
...
field:char prev_comm[16]; offset:8; size:16; signed:1;
...
field:char next_comm[16]; offset:40; size:16; signed:1;

and the character arrays prev_comm and next_comm are per default signed
char and have values in the range of -1..127. The implementation of
type char is architecture specific.

Since the character arrays in both tracepoints sched_switch and
sched_wakeup should contain ascii characters, simply omit the check for
signedness in the test case.

Output before:

[root@m35lp76 perf]# ./perf test -F 14
14: Parse sched tracepoints fields :
--- start ---
sched:sched_switch: "prev_comm" signedness(0) is wrong, should be 1
sched:sched_switch: "next_comm" signedness(0) is wrong, should be 1
sched:sched_wakeup: "comm" signedness(0) is wrong, should be 1
---- end ----
14: Parse sched tracepoints fields : FAILED!
[root@m35lp76 perf]#

Output after:

[root@m35lp76 perf]# ./perf test -Fv 14
14: Parse sched tracepoints fields :
--- start ---
---- end ----
Parse sched tracepoints fields: Ok
[root@m35lp76 perf]#

Fixes: 489338a717a0 ("perf tests evsel-tp-sched: Fix bitwise operator")

Signed-off-by: Thomas Richter <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Hendrik Brueckner <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/tests/evsel-tp-sched.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/perf/tests/evsel-tp-sched.c b/tools/perf/tests/evsel-tp-sched.c
index 66b53f10eb18..ea772d41e472 100644
--- a/tools/perf/tests/evsel-tp-sched.c
+++ b/tools/perf/tests/evsel-tp-sched.c
@@ -42,7 +42,7 @@ int test__perf_evsel__tp_sched_test(int subtest __maybe_unused)
return -1;
}

- if (perf_evsel__test_field(evsel, "prev_comm", 16, true))
+ if (perf_evsel__test_field(evsel, "prev_comm", 16, false))
ret = -1;

if (perf_evsel__test_field(evsel, "prev_pid", 4, true))
@@ -54,7 +54,7 @@ int test__perf_evsel__tp_sched_test(int subtest __maybe_unused)
if (perf_evsel__test_field(evsel, "prev_state", sizeof(long), true))
ret = -1;

- if (perf_evsel__test_field(evsel, "next_comm", 16, true))
+ if (perf_evsel__test_field(evsel, "next_comm", 16, false))
ret = -1;

if (perf_evsel__test_field(evsel, "next_pid", 4, true))
@@ -72,7 +72,7 @@ int test__perf_evsel__tp_sched_test(int subtest __maybe_unused)
return -1;
}

- if (perf_evsel__test_field(evsel, "comm", 16, true))
+ if (perf_evsel__test_field(evsel, "comm", 16, false))
ret = -1;

if (perf_evsel__test_field(evsel, "pid", 4, true))
--
2.19.1


2019-03-27 18:24:05

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 78/87] media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration

From: Pawe? Chmiel <[email protected]>

[ Upstream commit 49710c32cd9d6626a77c9f5f978a5f58cb536b35 ]

Previously when doing format enumeration, it was returning all
formats supported by driver, even if they're not supported by hw.
Add missing check for fmt_ver_flag, so it'll be fixed and only those
supported by hw will be returned. Similar thing is already done
in s5p_jpeg_find_format.

It was found by using v4l2-compliance tool and checking result
of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test
and using v4l2-ctl to get list of all supported formats.

Tested on s5pv210-galaxys (Samsung i9000 phone).

Fixes: bb677f3ac434 ("[media] Exynos4 JPEG codec v4l2 driver")

Signed-off-by: Pawe? Chmiel <[email protected]>
Reviewed-by: Jacek Anaszewski <[email protected]>
[[email protected]: fix a few alignment issues]
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/s5p-jpeg/jpeg-core.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 06e2b72d07ca..c89922fb42ce 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -1264,13 +1264,16 @@ static int s5p_jpeg_querycap(struct file *file, void *priv,
return 0;
}

-static int enum_fmt(struct s5p_jpeg_fmt *sjpeg_formats, int n,
+static int enum_fmt(struct s5p_jpeg_ctx *ctx,
+ struct s5p_jpeg_fmt *sjpeg_formats, int n,
struct v4l2_fmtdesc *f, u32 type)
{
int i, num = 0;
+ unsigned int fmt_ver_flag = ctx->jpeg->variant->fmt_ver_flag;

for (i = 0; i < n; ++i) {
- if (sjpeg_formats[i].flags & type) {
+ if (sjpeg_formats[i].flags & type &&
+ sjpeg_formats[i].flags & fmt_ver_flag) {
/* index-th format of type type found ? */
if (num == f->index)
break;
@@ -1297,11 +1300,11 @@ static int s5p_jpeg_enum_fmt_vid_cap(struct file *file, void *priv,
struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);

if (ctx->mode == S5P_JPEG_ENCODE)
- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
SJPEG_FMT_FLAG_ENC_CAPTURE);

- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
- SJPEG_FMT_FLAG_DEC_CAPTURE);
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ SJPEG_FMT_FLAG_DEC_CAPTURE);
}

static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
@@ -1310,11 +1313,11 @@ static int s5p_jpeg_enum_fmt_vid_out(struct file *file, void *priv,
struct s5p_jpeg_ctx *ctx = fh_to_ctx(priv);

if (ctx->mode == S5P_JPEG_ENCODE)
- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
SJPEG_FMT_FLAG_ENC_OUTPUT);

- return enum_fmt(sjpeg_formats, SJPEG_NUM_FORMATS, f,
- SJPEG_FMT_FLAG_DEC_OUTPUT);
+ return enum_fmt(ctx, sjpeg_formats, SJPEG_NUM_FORMATS, f,
+ SJPEG_FMT_FLAG_DEC_OUTPUT);
}

static struct s5p_jpeg_q_data *get_q_data(struct s5p_jpeg_ctx *ctx,
--
2.19.1


2019-03-27 18:24:06

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 83/87] wlcore: Fix memory leak in case wl12xx_fetch_firmware failure

From: Zumeng Chen <[email protected]>

[ Upstream commit ba2ffc96321c8433606ceeb85c9e722b8113e5a7 ]

Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware
failed instead of meaningless goto out to avoid the following memory leak
reports(Only the last one listed):

unreferenced object 0xc28a9a00 (size 512):
comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<6624adab>] kmemleak_alloc+0x40/0x74
[<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270
[<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore]
[<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore]
[<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211]
[<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211]
[<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211]
[<7e1d425a>] process_one_work+0x284/0x42c
[<55f9432e>] worker_thread+0x2fc/0x48c
[<abb582c6>] kthread+0x148/0x160
[<63144b13>] ret_from_fork+0x14/0x2c
[< (null)>] (null)
[<1f6e7715>] 0xffffffff

Signed-off-by: Zumeng Chen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/ti/wlcore/main.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 5438975c7ff2..17d32ce5d16b 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1058,8 +1058,11 @@ static int wl12xx_chip_wakeup(struct wl1271 *wl, bool plt)
goto out;

ret = wl12xx_fetch_firmware(wl, plt);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ kfree(wl->fw_status);
+ kfree(wl->raw_fw_status);
+ kfree(wl->tx_res_if);
+ }

out:
return ret;
--
2.19.1


2019-03-27 18:24:24

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 53/87] bcache: fix input overflow to sequential_cutoff

From: Coly Li <[email protected]>

[ Upstream commit 8c27a3953e92eb0b22dbb03d599f543a05f9574e ]

People may set sequential_cutoff of a cached device via sysfs file,
but current code does not check input value overflow. E.g. if value
4294967295 (UINT_MAX) is written to file sequential_cutoff, its value
is 4GB, but if 4294967296 (UINT_MAX + 1) is written into, its value
will be 0. This is an unexpected behavior.

This patch replaces d_strtoi_h() by sysfs_strtoul_clamp() to convert
input string to unsigned integer value, and limit its range in
[0, UINT_MAX]. Then the input overflow can be fixed.

Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/bcache/sysfs.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 87daccbbc61b..463ce6757338 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -215,7 +215,9 @@ STORE(__cached_dev)
d_strtoul(writeback_rate_d_term);
d_strtoul_nonzero(writeback_rate_p_term_inverse);

- d_strtoi_h(sequential_cutoff);
+ sysfs_strtoul_clamp(sequential_cutoff,
+ dc->sequential_cutoff,
+ 0, UINT_MAX);
d_strtoi_h(readahead);

if (attr == &sysfs_clear_stats)
--
2.19.1


2019-03-27 18:24:25

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 84/87] x86/build: Mark per-CPU symbols as absolute explicitly for LLD

From: Rafael Ávila de Espíndola <[email protected]>

[ Upstream commit d071ae09a4a1414c1433d5ae9908959a7325b0ad ]

Accessing per-CPU variables is done by finding the offset of the
variable in the per-CPU block and adding it to the address of the
respective CPU's block.

Section 3.10.8 of ld.bfd's documentation states:

For expressions involving numbers, relative addresses and absolute
addresses, ld follows these rules to evaluate terms:

Other binary operations, that is, between two relative addresses
not in the same section, or between a relative address and an
absolute address, first convert any non-absolute term to an
absolute address before applying the operator."

Note that LLVM's linker does not adhere to the GNU ld's implementation
and as such requires implicitly-absolute terms to be explicitly marked
as absolute in the linker script. If not, it fails currently with:

ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute
Makefile:1040: recipe for target 'vmlinux' failed

This is not a functional change for ld.bfd which converts the term to an
absolute symbol anyways as specified above.

Based on a previous submission by Tri Vo <[email protected]>.

Reported-by: Dmitry Golovin <[email protected]>
Signed-off-by: Rafael Ávila de Espíndola <[email protected]>
[ Update commit message per Boris' and Michael's suggestions. ]
Signed-off-by: Nick Desaulniers <[email protected]>
[ Massage commit message more, fix typos. ]
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Dmitry Golovin <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Brijesh Singh <[email protected]>
Cc: Cao Jin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joerg Roedel <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tri Vo <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: x86-ml <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/vmlinux.lds.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index e783a5daaab2..55f04875293f 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -367,7 +367,7 @@ SECTIONS
* Per-cpu symbols which need to be offset from __per_cpu_load
* for the boot processor.
*/
-#define INIT_PER_CPU(x) init_per_cpu__##x = x + __per_cpu_load
+#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load
INIT_PER_CPU(gdt_page);
INIT_PER_CPU(irq_stack_union);

--
2.19.1


2019-03-27 18:24:28

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 59/87] e1000e: fix cyclic resets at link up with active tx

From: Konstantin Khlebnikov <[email protected]>

[ Upstream commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61 ]

I'm seeing series of e1000e resets (sometimes endless) at system boot
if something generates tx traffic at this time. In my case this is
netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states
have been disabled in order to enable jumbo frames" from e1000e itself.
As result e1000_watchdog_task sees used tx buffer while carrier is off
and start this reset cycle again.

[ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000
[ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 27.174495] 8021q: 802.1Q VLAN Support v1.8
[ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1
[ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 30.898564] netpoll: netconsole: local port 6666
[ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8
[ 30.898567] netpoll: netconsole: interface 'eth1'
[ 30.898568] netpoll: netconsole: remote port 6666
[ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790
[ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0
[ 30.917747] console [netcon0] enabled
[ 30.917749] netconsole: network logging started
[ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames
[ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

This patch flushes tx buffers only once when carrier is off
rather than at each watchdog iteration.

Signed-off-by: Konstantin Khlebnikov <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index f56f8b6e2378..8bbedfc9c48f 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5291,8 +5291,13 @@ static void e1000_watchdog_task(struct work_struct *work)
/* 8000ES2LAN requires a Rx packet buffer work-around
* on link down event; reset the controller to flush
* the Rx packet buffer.
+ *
+ * If the link is lost the controller stops DMA, but
+ * if there is queued Tx work it cannot be done. So
+ * reset the controller to flush the Tx packet buffers.
*/
- if (adapter->flags & FLAG_RX_NEEDS_RESTART)
+ if ((adapter->flags & FLAG_RX_NEEDS_RESTART) ||
+ e1000_desc_unused(tx_ring) + 1 < tx_ring->count)
adapter->flags |= FLAG_RESTART_NOW;
else
pm_schedule_suspend(netdev->dev.parent,
@@ -5315,14 +5320,6 @@ static void e1000_watchdog_task(struct work_struct *work)
adapter->gotc_old = adapter->stats.gotc;
spin_unlock(&adapter->stats64_lock);

- /* If the link is lost the controller stops DMA, but
- * if there is queued Tx work it cannot be done. So
- * reset the controller to flush the Tx packet buffers.
- */
- if (!netif_carrier_ok(netdev) &&
- (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
- adapter->flags |= FLAG_RESTART_NOW;
-
/* If reset is necessary, do it outside of interrupt context. */
if (adapter->flags & FLAG_RESTART_NOW) {
schedule_work(&adapter->reset_task);
--
2.19.1


2019-03-27 18:24:43

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 63/87] ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation

From: Mathieu Malaterre <[email protected]>

[ Upstream commit 3e3380d0675d5e20b0af067d60cb947a4348bf9b ]

Improve the DTS files by removing all the leading "0x" and zeros to fix
the following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +

For simplicity, two sed expressions were used to solve each warnings
separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <[email protected]>
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
[vzapolskiy: fixed commit message to pass checkpatch.pl test]
Signed-off-by: Vladimir Zapolskiy <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/lpc32xx.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index b5841fab51c1..0d20aadc78bb 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -230,7 +230,7 @@
status = "disabled";
};

- i2s1: i2s@2009C000 {
+ i2s1: i2s@2009c000 {
compatible = "nxp,lpc3220-i2s";
reg = <0x2009C000 0x1000>;
};
@@ -273,7 +273,7 @@
status = "disabled";
};

- i2c1: i2c@400A0000 {
+ i2c1: i2c@400a0000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A0000 0x100>;
interrupt-parent = <&sic1>;
@@ -284,7 +284,7 @@
clocks = <&clk LPC32XX_CLK_I2C1>;
};

- i2c2: i2c@400A8000 {
+ i2c2: i2c@400a8000 {
compatible = "nxp,pnx-i2c";
reg = <0x400A8000 0x100>;
interrupt-parent = <&sic1>;
@@ -295,7 +295,7 @@
clocks = <&clk LPC32XX_CLK_I2C2>;
};

- mpwm: mpwm@400E8000 {
+ mpwm: mpwm@400e8000 {
compatible = "nxp,lpc3220-motor-pwm";
reg = <0x400E8000 0x78>;
status = "disabled";
@@ -394,7 +394,7 @@
#gpio-cells = <3>; /* bank, pin, flags */
};

- timer4: timer@4002C000 {
+ timer4: timer@4002c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4002C000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -412,7 +412,7 @@
status = "disabled";
};

- watchdog: watchdog@4003C000 {
+ watchdog: watchdog@4003c000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
clocks = <&clk LPC32XX_CLK_WDOG>;
@@ -451,7 +451,7 @@
status = "disabled";
};

- timer1: timer@4004C000 {
+ timer1: timer@4004c000 {
compatible = "nxp,lpc3220-timer";
reg = <0x4004C000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
@@ -475,14 +475,14 @@
status = "disabled";
};

- pwm1: pwm@4005C000 {
+ pwm1: pwm@4005c000 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C000 0x4>;
clocks = <&clk LPC32XX_CLK_PWM1>;
status = "disabled";
};

- pwm2: pwm@4005C004 {
+ pwm2: pwm@4005c004 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C004 0x4>;
clocks = <&clk LPC32XX_CLK_PWM2>;
--
2.19.1


2019-03-27 18:24:48

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 67/87] tty: increase the default flip buffer limit to 2*640K

From: Manfred Schlaegl <[email protected]>

[ Upstream commit 7ab57b76ebf632bf2231ccabe26bea33868118c6 ]

We increase the default limit for buffer memory allocation by a factor of
10 to 640K to prevent data loss when using fast serial interfaces.

For example when using RS485 without flow-control at speeds of 1Mbit/s
an upwards we've run into problems such as applications being too slow
to read out this buffer (on embedded devices based on imx53 or imx6).

If you want to write transmitted data to a slow SD card and thus have
realtime requirements, this limit can become a problem.

That shouldn't be the case and 640K buffers fix such problems for us.

This value is a maximum limit for allocation only. It has no effect
on systems that currently run fine. When transmission is slow enough
applications and hardware can keep up and increasing this limit
doesn't change anything.

It only _allows_ to allocate more than 2*64K in cases we currently fail to
allocate memory despite having some.

Signed-off-by: Manfred Schlaegl <[email protected]>
Signed-off-by: Martin Kepplinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/tty_buffer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 41b9a7ccce08..ca9c82ee6c35 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -25,7 +25,7 @@
* Byte threshold to limit memory consumption for flip buffers.
* The actual memory limit is > 2x this amount.
*/
-#define TTYB_DEFAULT_MEM_LIMIT 65536
+#define TTYB_DEFAULT_MEM_LIMIT (640 * 1024UL)

/*
* We default to dicing tty buffer allocations to this many characters
--
2.19.1


2019-03-27 18:25:03

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 08/87] enic: fix build warning without CONFIG_CPUMASK_OFFSTACK

From: Arnd Bergmann <[email protected]>

[ Upstream commit 43d281662fdb46750d49417559b71069f435298d ]

The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to
dynamically allocate a struct member, but this is normally intended for
local variables.

Building with clang, I get a warning for a few locations that check the
address of the cpumask_var_t:

drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]

As far as I can tell, the code is still correct, as the truth value of
the pointer is what we need in this configuration. To get rid of
the warning, use cpumask_available() instead of checking the
pointer directly.

Fixes: 322cf7e3a4e8 ("enic: assign affinity hint to interrupts")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cisco/enic/enic_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 89acf7bc4cf9..b73d9ba9496c 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -120,7 +120,7 @@ static void enic_init_affinity_hint(struct enic *enic)

for (i = 0; i < enic->intr_count; i++) {
if (enic_is_err_intr(enic, i) || enic_is_notify_intr(enic, i) ||
- (enic->msix[i].affinity_mask &&
+ (cpumask_available(enic->msix[i].affinity_mask) &&
!cpumask_empty(enic->msix[i].affinity_mask)))
continue;
if (zalloc_cpumask_var(&enic->msix[i].affinity_mask,
@@ -149,7 +149,7 @@ static void enic_set_affinity_hint(struct enic *enic)
for (i = 0; i < enic->intr_count; i++) {
if (enic_is_err_intr(enic, i) ||
enic_is_notify_intr(enic, i) ||
- !enic->msix[i].affinity_mask ||
+ !cpumask_available(enic->msix[i].affinity_mask) ||
cpumask_empty(enic->msix[i].affinity_mask))
continue;
err = irq_set_affinity_hint(enic->msix_entry[i].vector,
@@ -162,7 +162,7 @@ static void enic_set_affinity_hint(struct enic *enic)
for (i = 0; i < enic->wq_count; i++) {
int wq_intr = enic_msix_wq_intr(enic, i);

- if (enic->msix[wq_intr].affinity_mask &&
+ if (cpumask_available(enic->msix[wq_intr].affinity_mask) &&
!cpumask_empty(enic->msix[wq_intr].affinity_mask))
netif_set_xps_queue(enic->netdev,
enic->msix[wq_intr].affinity_mask,
--
2.19.1


2019-03-27 18:40:28

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 85/87] dmaengine: tegra: avoid overflow of byte tracking

From: Ben Dooks <[email protected]>

[ Upstream commit e486df39305864604b7e25f2a95d51039517ac57 ]

The dma_desc->bytes_transferred counter tracks the number of bytes
moved by the DMA channel. This is then used to calculate the information
passed back in the in the tegra_dma_tx_status callback, which is usually
fine.

When the DMA channel is configured as continous, then the bytes_transferred
counter will increase over time and eventually overflow to become negative
so the residue count will become invalid and the ALSA sound-dma code will
report invalid hardware pointer values to the application. This results in
some users becoming confused about the playout position and putting audio
data in the wrong place.

To fix this issue, always ensure the bytes_transferred field is modulo the
size of the request. We only do this for the case of the cyclic transfer
done ISR as anyone attempting to move 2GiB of DMA data in one transfer
is unlikely.

Note, we don't fix the issue that we should /never/ transfer a negative
number of bytes so we could make those fields unsigned.

Reviewed-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Ben Dooks <[email protected]>
Acked-by: Jon Hunter <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/tegra20-apb-dma.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 3722b9d8d9fe..22f7f0c68a48 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -635,7 +635,10 @@ static void handle_cont_sngl_cycle_dma_done(struct tegra_dma_channel *tdc,

sgreq = list_first_entry(&tdc->pending_sg_req, typeof(*sgreq), node);
dma_desc = sgreq->dma_desc;
- dma_desc->bytes_transferred += sgreq->req_len;
+ /* if we dma for long enough the transfer count will wrap */
+ dma_desc->bytes_transferred =
+ (dma_desc->bytes_transferred + sgreq->req_len) %
+ dma_desc->bytes_requested;

/* Callback need to be call */
if (!dma_desc->cb_count)
--
2.19.1


2019-03-27 18:40:31

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 87/87] ACPI / video: Extend chassis-type detection with a "Lunch Box" check

From: Hans de Goede <[email protected]>

[ Upstream commit d693c008e3ca04db5916ff72e68ce661888a913b ]

Commit 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") introduced chassis type detection, limiting the
lcd_only check for the backlight to devices where the chassis-type
indicates their is no builtin LCD panel.

The purpose of the lcd_only check is to avoid advertising a backlight
interface on desktops, since skylake and newer machines seem to always
have a backlight interface even if there is no LCD panel. The limiting
of this check to desktops only was done to avoid breaking backlight
support on some laptops which do not have the lcd flag set.

The Fujitsu ESPRIMO Q910 which is a compact (NUC like) desktop machine
has a chassis type of 0x10 aka "Lunch Box". Without the lcd_only check
we end up falsely advertising backlight/brightness control on this
device. This commit extend the dmi_is_desktop check to return true
for type 0x10 to fix this.

Fixes: 53fa1f6e8a59 ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/acpi/acpi_video.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c
index d79e38abd6d9..ea0573176894 100644
--- a/drivers/acpi/acpi_video.c
+++ b/drivers/acpi/acpi_video.c
@@ -2088,6 +2088,7 @@ static bool dmi_is_desktop(void)
case 0x05: /* Pizza Box */
case 0x06: /* Mini Tower */
case 0x07: /* Tower */
+ case 0x10: /* Lunch Box */
case 0x11: /* Main Server Chassis */
return true;
}
--
2.19.1


2019-03-27 18:41:00

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 81/87] x86/build: Specify elf_i386 linker emulation explicitly for i386 objects

From: George Rimar <[email protected]>

[ Upstream commit 927185c124d62a9a4d35878d7f6d432a166b74e3 ]

The kernel uses the OUTPUT_FORMAT linker script command in it's linker
scripts. Most of the time, the -m option is passed to the linker with
correct architecture, but sometimes (at least for x86_64) the -m option
contradicts the OUTPUT_FORMAT directive.

Specifically, arch/x86/boot and arch/x86/realmode/rm produce i386 object
files, but are linked with the -m elf_x86_64 linker flag when building
for x86_64.

The GNU linker manpage doesn't explicitly state any tie-breakers between
-m and OUTPUT_FORMAT. But with BFD and Gold linkers, OUTPUT_FORMAT
overrides the emulation value specified with the -m option.

LLVM lld has a different behavior, however. When supplied with
contradicting -m and OUTPUT_FORMAT values it fails with the following
error message:

ld.lld: error: arch/x86/realmode/rm/header.o is incompatible with elf_x86_64

Therefore, just add the correct -m after the incorrect one (it overrides
it), so the linker invocation looks like this:

ld -m elf_x86_64 -z max-page-size=0x200000 -m elf_i386 --emit-relocs -T \
realmode.lds header.o trampoline_64.o stack.o reboot.o -o realmode.elf

This is not a functional change for GNU ld, because (although not
explicitly documented) OUTPUT_FORMAT overrides -m EMULATION.

Tested by building x86_64 kernel with GNU gcc/ld toolchain and booting
it in QEMU.

[ bp: massage and clarify text. ]

Suggested-by: Dmitry Golovin <[email protected]>
Signed-off-by: George Rimar <[email protected]>
Signed-off-by: Tri Vo <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Tri Vo <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Michael Matz <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: x86-ml <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/boot/Makefile | 2 +-
arch/x86/realmode/rm/Makefile | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 3b7156f46bc1..3b16935b22bc 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -100,7 +100,7 @@ $(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
AFLAGS_header.o += -I$(objtree)/$(obj)
$(obj)/header.o: $(obj)/zoffset.h

-LDFLAGS_setup.elf := -T
+LDFLAGS_setup.elf := -m elf_i386 -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
$(call if_changed,ld)

diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile
index 25012abc3409..ce5f431e6823 100644
--- a/arch/x86/realmode/rm/Makefile
+++ b/arch/x86/realmode/rm/Makefile
@@ -47,7 +47,7 @@ $(obj)/pasyms.h: $(REALMODE_OBJS) FORCE
targets += realmode.lds
$(obj)/realmode.lds: $(obj)/pasyms.h

-LDFLAGS_realmode.elf := --emit-relocs -T
+LDFLAGS_realmode.elf := -m elf_i386 --emit-relocs -T
CPPFLAGS_realmode.lds += -P -C -I$(objtree)/$(obj)

targets += realmode.elf
--
2.19.1


2019-03-27 18:41:04

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 80/87] drm/nouveau: Stop using drm_crtc_force_disable

From: Daniel Vetter <[email protected]>

[ Upstream commit 934c5b32a5e43d8de2ab4f1566f91d7c3bf8cb64 ]

The correct way for legacy drivers to update properties that need to
do a full modeset, is to do a full modeset.

Note that we don't need to call the drm_mode_config_internal helper
because we're not changing any of the refcounted paramters.

v2: Fixup error handling (Ville). Since the old code didn't bother
I decided to just delete it instead of adding even more code for just
error handling.

Cc: Ville Syrjälä <[email protected]>
Reviewed-by: Alex Deucher <[email protected]> (v1)
Cc: Sean Paul <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/nouveau/dispnv04/tvnv17.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
index 434d1e29f279..cd37d00e9723 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/tvnv17.c
@@ -750,7 +750,9 @@ static int nv17_tv_set_property(struct drm_encoder *encoder,
/* Disable the crtc to ensure a full modeset is
* performed whenever it's turned on again. */
if (crtc)
- drm_crtc_force_disable(crtc);
+ drm_crtc_helper_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y,
+ crtc->primary->fb);
}

return 0;
--
2.19.1


2019-03-27 18:41:20

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 79/87] regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting

From: Axel Lin <[email protected]>

[ Upstream commit f01a7beb6791f1c419424c1a6958b7d0a289c974 ]

The act8600_sudcdc_voltage_ranges setting does not match the datasheet.

The problems in below entry:
REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),

1. The off-by-one min_sel causes wrong volatage calculation.
The min_sel should be 192.
2. According to the datasheet[1] Table 7. (on page 43):
The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V.

Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM.

[1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf

Fixes: df3a950e4e73 ("regulator: act8865: Add act8600 support")
Signed-off-by: Axel Lin <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/act8865-regulator.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 7652477e6a9d..39e8d60df060 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -131,7 +131,7 @@
* ACT8865 voltage number
*/
#define ACT8865_VOLTAGE_NUM 64
-#define ACT8600_SUDCDC_VOLTAGE_NUM 255
+#define ACT8600_SUDCDC_VOLTAGE_NUM 256

struct act8865 {
struct regmap *regmap;
@@ -222,7 +222,8 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
- REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),
+ REGULATOR_LINEAR_RANGE(19000000, 192, 247, 400000),
+ REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
};

static struct regulator_ops act8865_ops = {
--
2.19.1


2019-03-27 18:41:32

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 72/87] HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR busy_clear bit

From: Song Hongyan <[email protected]>

[ Upstream commit 2edefc056e4f0e6ec9508dd1aca2c18fa320efef ]

Host driver should handle interrupt mask register earlier than wake up ish FW
else there will be conditions when FW interrupt comes, host PIMR register still
not set ready, so move the interrupt mask setting before ish_wakeup.

Clear PISR busy_clear bit in ish_irq_handler. If not clear, there will be
conditions host driver received a busy_clear interrupt (before the busy_clear
mask bit is ready), it will return IRQ_NONE after check_generated_interrupt,
the interrupt will never be cleared, causing the DEVICE not sending following
IRQ.

Since PISR clear should not be called for the CHV device we do this change.
After the change, both ISH2HOST interrupt and busy_clear interrupt will be
considered as interrupt from ISH, busy_clear interrupt will return IRQ_HANDLED
from IPC_IS_BUSY check.

Signed-off-by: Song Hongyan <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/intel-ish-hid/ipc/ipc.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
index 0c9ac4d5d850..41d44536aa15 100644
--- a/drivers/hid/intel-ish-hid/ipc/ipc.c
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -92,7 +92,10 @@ static bool check_generated_interrupt(struct ishtp_device *dev)
IPC_INT_FROM_ISH_TO_HOST_CHV_AB(pisr_val);
} else {
pisr_val = ish_reg_read(dev, IPC_REG_PISR_BXT);
- interrupt_generated = IPC_INT_FROM_ISH_TO_HOST_BXT(pisr_val);
+ interrupt_generated = !!pisr_val;
+ /* only busy-clear bit is RW, others are RO */
+ if (pisr_val)
+ ish_reg_write(dev, IPC_REG_PISR_BXT, pisr_val);
}

return interrupt_generated;
@@ -795,11 +798,11 @@ int ish_hw_start(struct ishtp_device *dev)
{
ish_set_host_rdy(dev);

+ set_host_ready(dev);
+
/* After that we can enable ISH DMA operation and wakeup ISHFW */
ish_wakeup(dev);

- set_host_ready(dev);
-
/* wait for FW-initiated reset flow */
if (!dev->recvd_hw_ready)
wait_event_interruptible_timeout(dev->wait_hw_ready,
--
2.19.1


2019-03-27 18:41:37

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 82/87] selinux: do not override context on context mounts

From: Ondrej Mosnacek <[email protected]>

[ Upstream commit 53e0c2aa9a59a48e3798ef193d573ade85aa80f5 ]

Ignore all selinux_inode_notifysecctx() calls on mounts with SBLABEL_MNT
flag unset. This is achived by returning -EOPNOTSUPP for this case in
selinux_inode_setsecurtity() (because that function should not be called
in such case anyway) and translating this error to 0 in
selinux_inode_notifysecctx().

This fixes behavior of kernfs-based filesystems when mounted with the
'context=' option. Before this patch, if a node's context had been
explicitly set to a non-default value and later the filesystem has been
remounted with the 'context=' option, then this node would show up as
having the manually-set context and not the mount-specified one.

Steps to reproduce:
# mount -t cgroup2 cgroup2 /sys/fs/cgroup/unified
# chcon unconfined_u:object_r:user_home_t:s0 /sys/fs/cgroup/unified/cgroup.stat
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0 0 Dec 13 10:41 cgroup.threads
# umount /sys/fs/cgroup/unified
# mount -o context=system_u:object_r:tmpfs_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified

Result before:
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads

Result after:
# ls -lZ /sys/fs/cgroup/unified
total 0
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
-r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.stat
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
-rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads

Signed-off-by: Ondrej Mosnacek <[email protected]>
Reviewed-by: Stephen Smalley <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
security/selinux/hooks.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index d293b546a2aa..9bd6f97ccd21 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3265,12 +3265,16 @@ static int selinux_inode_setsecurity(struct inode *inode, const char *name,
const void *value, size_t size, int flags)
{
struct inode_security_struct *isec = inode_security_novalidate(inode);
+ struct superblock_security_struct *sbsec = inode->i_sb->s_security;
u32 newsid;
int rc;

if (strcmp(name, XATTR_SELINUX_SUFFIX))
return -EOPNOTSUPP;

+ if (!(sbsec->flags & SBLABEL_MNT))
+ return -EOPNOTSUPP;
+
if (!value || !size)
return -EACCES;

@@ -5984,7 +5988,10 @@ static void selinux_inode_invalidate_secctx(struct inode *inode)
*/
static int selinux_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen)
{
- return selinux_inode_setsecurity(inode, XATTR_SELINUX_SUFFIX, ctx, ctxlen, 0);
+ int rc = selinux_inode_setsecurity(inode, XATTR_SELINUX_SUFFIX,
+ ctx, ctxlen, 0);
+ /* Do not return error when suppressing label (SBLABEL_MNT not set). */
+ return rc == -EOPNOTSUPP ? 0 : rc;
}

/*
--
2.19.1


2019-03-27 18:41:54

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 74/87] hpet: Fix missing '=' character in the __setup() code of hpet_mmap_enable

From: Buland Singh <[email protected]>

[ Upstream commit 24d48a61f2666630da130cc2ec2e526eacf229e3 ]

Commit '3d035f580699 ("drivers/char/hpet.c: allow user controlled mmap for
user processes")' introduced a new kernel command line parameter hpet_mmap,
that is required to expose the memory map of the HPET registers to
user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is
broken and never takes effect due to missing '=' character in the __setup()
code of hpet_mmap_enable.

Before this patch:

dmesg output with the kernel command line parameter hpet_mmap=1

[ 0.204152] HPET mmap disabled

dmesg output with the kernel command line parameter hpet_mmap=0

[ 0.204192] HPET mmap disabled

After this patch:

dmesg output with the kernel command line parameter hpet_mmap=1

[ 0.203945] HPET mmap enabled

dmesg output with the kernel command line parameter hpet_mmap=0

[ 0.204652] HPET mmap disabled

Fixes: 3d035f580699 ("drivers/char/hpet.c: allow user controlled mmap for user processes")
Signed-off-by: Buland Singh <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hpet.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 50272fe81f26..818a8d40e5c9 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -376,7 +376,7 @@ static __init int hpet_mmap_enable(char *str)
pr_info("HPET mmap %s\n", hpet_mmap_enabled ? "enabled" : "disabled");
return 1;
}
-__setup("hpet_mmap", hpet_mmap_enable);
+__setup("hpet_mmap=", hpet_mmap_enable);

static int hpet_mmap(struct file *file, struct vm_area_struct *vma)
{
--
2.19.1


2019-03-27 18:42:02

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 69/87] media: mt9m111: set initial frame size other than 0x0

From: Akinobu Mita <[email protected]>

[ Upstream commit 29856308137de1c21eda89411695f4fc6e9780ff ]

This driver sets initial frame width and height to 0x0, which is invalid.
So set it to selection rectangle bounds instead.

This is detected by v4l2-compliance detected.

Cc: Enrico Scholz <[email protected]>
Cc: Michael Grzeschik <[email protected]>
Cc: Marco Felsch <[email protected]>
Signed-off-by: Akinobu Mita <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/i2c/mt9m111.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index 72e71b762827..a6145877bd00 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -974,6 +974,8 @@ static int mt9m111_probe(struct i2c_client *client,
mt9m111->rect.top = MT9M111_MIN_DARK_ROWS;
mt9m111->rect.width = MT9M111_MAX_WIDTH;
mt9m111->rect.height = MT9M111_MAX_HEIGHT;
+ mt9m111->width = mt9m111->rect.width;
+ mt9m111->height = mt9m111->rect.height;
mt9m111->fmt = &mt9m111_colour_fmts[0];
mt9m111->lastpage = -1;
mutex_init(&mt9m111->power_lock);
--
2.19.1


2019-03-27 18:42:18

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 07/87] sysctl: handle overflow for file-max

From: Christian Brauner <[email protected]>

[ Upstream commit 32a5ad9c22852e6bd9e74bdec5934ef9d1480bc5 ]

Currently, when writing

echo 18446744073709551616 > /proc/sys/fs/file-max

/proc/sys/fs/file-max will overflow and be set to 0. That quickly
crashes the system.

This commit sets the max and min value for file-max. The max value is
set to long int. Any higher value cannot currently be used as the
percpu counters are long ints and not unsigned integers.

Note that the file-max value is ultimately parsed via
__do_proc_doulongvec_minmax(). This function does not report error when
min or max are exceeded. Which means if a value largen that long int is
written userspace will not receive an error instead the old value will be
kept. There is an argument to be made that this should be changed and
__do_proc_doulongvec_minmax() should return an error when a dedicated min
or max value are exceeded. However this has the potential to break
userspace so let's defer this to an RFC patch.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Dominik Brodowski <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Joe Lawrence <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Cc: Waiman Long <[email protected]>
[[email protected]: v4]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sysctl.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index efd340a510a9..5515d578095b 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -125,6 +125,7 @@ static int __maybe_unused one = 1;
static int __maybe_unused two = 2;
static int __maybe_unused four = 4;
static unsigned long one_ul = 1;
+static unsigned long long_max = LONG_MAX;
static int one_hundred = 100;
static int one_thousand = 1000;
#ifdef CONFIG_PRINTK
@@ -1682,6 +1683,8 @@ static struct ctl_table fs_table[] = {
.maxlen = sizeof(files_stat.max_files),
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
+ .extra1 = &zero,
+ .extra2 = &long_max,
},
{
.procname = "nr_open",
--
2.19.1


2019-03-27 18:42:23

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 76/87] dmaengine: qcom_hidma: assign channel cookie correctly

From: Shunyong Yang <[email protected]>

[ Upstream commit 546c0547555efca8ba8c120716c325435e29df1b ]

When dma_cookie_complete() is called in hidma_process_completed(),
dma_cookie_status() will return DMA_COMPLETE in hidma_tx_status(). Then,
hidma_txn_is_success() will be called to use channel cookie
mchan->last_success to do additional DMA status check. Current code
assigns mchan->last_success after dma_cookie_complete(). This causes
a race condition of dma_cookie_status() returns DMA_COMPLETE before
mchan->last_success is assigned correctly. The race will cause
hidma_tx_status() return DMA_ERROR but the transaction is actually a
success. Moreover, in async_tx case, it will cause a timeout panic
in async_tx_quiesce().

Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for
transaction
...
Call trace:
[<ffff000008089994>] dump_backtrace+0x0/0x1f4
[<ffff000008089bac>] show_stack+0x24/0x2c
[<ffff00000891e198>] dump_stack+0x84/0xa8
[<ffff0000080da544>] panic+0x12c/0x29c
[<ffff0000045d0334>] async_tx_quiesce+0xa4/0xc8 [async_tx]
[<ffff0000045d03c8>] async_trigger_callback+0x70/0x1c0 [async_tx]
[<ffff0000048b7d74>] raid_run_ops+0x86c/0x1540 [raid456]
[<ffff0000048bd084>] handle_stripe+0x5e8/0x1c7c [raid456]
[<ffff0000048be9ec>] handle_active_stripes.isra.45+0x2d4/0x550 [raid456]
[<ffff0000048beff4>] raid5d+0x38c/0x5d0 [raid456]
[<ffff000008736538>] md_thread+0x108/0x168
[<ffff0000080fb1cc>] kthread+0x10c/0x138
[<ffff000008084d34>] ret_from_fork+0x10/0x18

Cc: Joey Zheng <[email protected]>
Reviewed-by: Sinan Kaya <[email protected]>
Signed-off-by: Shunyong Yang <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/qcom/hidma.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
index e244e10a94b5..5444f39bf939 100644
--- a/drivers/dma/qcom/hidma.c
+++ b/drivers/dma/qcom/hidma.c
@@ -131,24 +131,25 @@ static void hidma_process_completed(struct hidma_chan *mchan)
desc = &mdesc->desc;
last_cookie = desc->cookie;

+ llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
+
spin_lock_irqsave(&mchan->lock, irqflags);
+ if (llstat == DMA_COMPLETE) {
+ mchan->last_success = last_cookie;
+ result.result = DMA_TRANS_NOERROR;
+ } else {
+ result.result = DMA_TRANS_ABORTED;
+ }
+
dma_cookie_complete(desc);
spin_unlock_irqrestore(&mchan->lock, irqflags);

- llstat = hidma_ll_status(mdma->lldev, mdesc->tre_ch);
dmaengine_desc_get_callback(desc, &cb);

dma_run_dependencies(desc);

spin_lock_irqsave(&mchan->lock, irqflags);
list_move(&mdesc->node, &mchan->free);
-
- if (llstat == DMA_COMPLETE) {
- mchan->last_success = last_cookie;
- result.result = DMA_TRANS_NOERROR;
- } else
- result.result = DMA_TRANS_ABORTED;
-
spin_unlock_irqrestore(&mchan->lock, irqflags);

dmaengine_desc_callback_invoke(&cb, &result);
--
2.19.1


2019-03-27 18:42:25

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 66/87] ARM: avoid Cortex-A9 livelock on tight dmb loops

From: Russell King <[email protected]>

[ Upstream commit 5388a5b82199facacd3d7ac0d05aca6e8f902fed ]

machine_crash_nonpanic_core() does this:

while (1)
cpu_relax();

because the kernel has crashed, and we have no known safe way to deal
with the CPU. So, we place the CPU into an infinite loop which we
expect it to never exit - at least not until the system as a whole is
reset by some method.

In the absence of erratum 754327, this code assembles to:

b .

In other words, an infinite loop. When erratum 754327 is enabled,
this becomes:

1: dmb
b 1b

It has been observed that on some systems (eg, OMAP4) where, if a
crash is triggered, the system tries to kexec into the panic kernel,
but fails after taking the secondary CPU down - placing it into one
of these loops. This causes the system to livelock, and the most
noticable effect is the system stops after issuing:

Loading crashdump kernel...

to the system console.

The tested as working solution I came up with was to add wfe() to
these infinite loops thusly:

while (1) {
cpu_relax();
wfe();
}

which, without 754327 builds to:

1: wfe
b 1b

or with 754327 is enabled:

1: dmb
wfe
b 1b

Adding "wfe" does two things depending on the environment we're running
under:
- where we're running on bare metal, and the processor implements
"wfe", it stops us spinning endlessly in a loop where we're never
going to do any useful work.
- if we're running in a VM, it allows the CPU to be given back to the
hypervisor and rescheduled for other purposes (maybe a different VM)
rather than wasting CPU cycles inside a crashed VM.

However, in light of erratum 794072, Will Deacon wanted to see 10 nops
as well - which is reasonable to cover the case where we have erratum
754327 enabled _and_ we have a processor that doesn't implement the
wfe hint.

So, we now end up with:

1: wfe
b 1b

when erratum 754327 is disabled, or:

1: dmb
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
wfe
b 1b

when erratum 754327 is enabled. We also get the dmb + 10 nop
sequence elsewhere in the kernel, in terminating loops.

This is reasonable - it means we get the workaround for erratum
794072 when erratum 754327 is enabled, but still relinquish the dead
processor - either by placing it in a lower power mode when wfe is
implemented as such or by returning it to the hypervisior, or in the
case where wfe is a no-op, we use the workaround specified in erratum
794072 to avoid the problem.

These as two entirely orthogonal problems - the 10 nops addresses
erratum 794072, and the wfe is an optimisation that makes the system
more efficient when crashed either in terms of power consumption or
by allowing the host/other VMs to make use of the CPU.

I don't see any reason not to use kexec() inside a VM - it has the
potential to provide automated recovery from a failure of the VMs
kernel with the opportunity for saving a crashdump of the failure.
A panic() with a reboot timeout won't do that, and reading the
libvirt documentation, setting on_reboot to "preserve" won't either
(the documentation states "The preserve action for an on_reboot event
is treated as a destroy".) Surely it has to be a good thing to
avoiding having CPUs spinning inside a VM that is doing no useful
work.

Acked-by: Will Deacon <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/include/asm/barrier.h | 2 ++
arch/arm/include/asm/processor.h | 6 +++++-
arch/arm/kernel/machine_kexec.c | 5 ++++-
arch/arm/kernel/smp.c | 4 +++-
arch/arm/mach-omap2/prm_common.c | 4 +++-
5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 513e03d138ea..8331cb0d3461 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -10,6 +10,8 @@
#define sev() __asm__ __volatile__ ("sev" : : : "memory")
#define wfe() __asm__ __volatile__ ("wfe" : : : "memory")
#define wfi() __asm__ __volatile__ ("wfi" : : : "memory")
+#else
+#define wfe() do { } while (0)
#endif

#if __LINUX_ARM_ARCH__ >= 7
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 8a1e8e995dae..08509183c7df 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -77,7 +77,11 @@ extern void release_thread(struct task_struct *);
unsigned long get_wchan(struct task_struct *p);

#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
-#define cpu_relax() smp_mb()
+#define cpu_relax() \
+ do { \
+ smp_mb(); \
+ __asm__ __volatile__("nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;"); \
+ } while (0)
#else
#define cpu_relax() barrier()
#endif
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index b18c1ea56bed..ef6b27fe1d2e 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -87,8 +87,11 @@ void machine_crash_nonpanic_core(void *unused)

set_cpu_online(smp_processor_id(), false);
atomic_dec(&waiting_for_crash_ipi);
- while (1)
+
+ while (1) {
cpu_relax();
+ wfe();
+ }
}

static void machine_kexec_mask_interrupts(void)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index bc83ec7ed53f..7a5dc011c523 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -602,8 +602,10 @@ static void ipi_cpu_stop(unsigned int cpu)
local_fiq_disable();
local_irq_disable();

- while (1)
+ while (1) {
cpu_relax();
+ wfe();
+ }
}

static DEFINE_PER_CPU(struct completion *, cpu_completion);
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index f1ca9479491b..9e14604b9642 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -533,8 +533,10 @@ void omap_prm_reset_system(void)

prm_ll_data->reset_system();

- while (1)
+ while (1) {
cpu_relax();
+ wfe();
+ }
}

/**
--
2.19.1


2019-03-27 18:42:29

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 77/87] netfilter: physdev: relax br_netfilter dependency

From: Florian Westphal <[email protected]>

[ Upstream commit 8e2f311a68494a6677c1724bdcb10bada21af37c ]

Following command:
iptables -D FORWARD -m physdev ...
causes connectivity loss in some setups.

Reason is that iptables userspace will probe kernel for the module revision
of the physdev patch, and physdev has an artificial dependency on
br_netfilter (xt_physdev use makes no sense unless a br_netfilter module
is loaded).

This causes the "phydev" module to be loaded, which in turn enables the
"call-iptables" infrastructure.

bridged packets might then get dropped by the iptables ruleset.

The better fix would be to change the "call-iptables" defaults to 0 and
enforce explicit setting to 1, but that breaks backwards compatibility.

This does the next best thing: add a request_module call to checkentry.
This was a stray '-D ... -m physdev' won't activate br_netfilter
anymore.

Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/netfilter/br_netfilter.h | 1 -
net/bridge/br_netfilter_hooks.c | 5 -----
net/netfilter/xt_physdev.c | 9 +++++++--
3 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/include/net/netfilter/br_netfilter.h b/include/net/netfilter/br_netfilter.h
index 0b0c35c37125..238d1b83a45a 100644
--- a/include/net/netfilter/br_netfilter.h
+++ b/include/net/netfilter/br_netfilter.h
@@ -48,7 +48,6 @@ static inline struct rtable *bridge_parent_rtable(const struct net_device *dev)
}

struct net_device *setup_pre_routing(struct sk_buff *skb);
-void br_netfilter_enable(void);

#if IS_ENABLED(CONFIG_IPV6)
int br_validate_ipv6(struct net *net, struct sk_buff *skb);
diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c
index 7e42c0d1f55b..38865deab3ac 100644
--- a/net/bridge/br_netfilter_hooks.c
+++ b/net/bridge/br_netfilter_hooks.c
@@ -878,11 +878,6 @@ static const struct nf_br_ops br_ops = {
.br_dev_xmit_hook = br_nf_dev_xmit,
};

-void br_netfilter_enable(void)
-{
-}
-EXPORT_SYMBOL_GPL(br_netfilter_enable);
-
/* For br_nf_post_routing, we need (prio = NF_BR_PRI_LAST), because
* br_dev_queue_push_xmit is called afterwards */
static struct nf_hook_ops br_nf_ops[] __read_mostly = {
diff --git a/net/netfilter/xt_physdev.c b/net/netfilter/xt_physdev.c
index bb33598e4530..ec247d8370e8 100644
--- a/net/netfilter/xt_physdev.c
+++ b/net/netfilter/xt_physdev.c
@@ -96,8 +96,7 @@ physdev_mt(const struct sk_buff *skb, struct xt_action_param *par)
static int physdev_mt_check(const struct xt_mtchk_param *par)
{
const struct xt_physdev_info *info = par->matchinfo;
-
- br_netfilter_enable();
+ static bool brnf_probed __read_mostly;

if (!(info->bitmask & XT_PHYSDEV_OP_MASK) ||
info->bitmask & ~XT_PHYSDEV_OP_MASK)
@@ -113,6 +112,12 @@ static int physdev_mt_check(const struct xt_mtchk_param *par)
if (par->hook_mask & (1 << NF_INET_LOCAL_OUT))
return -EINVAL;
}
+
+ if (!brnf_probed) {
+ brnf_probed = true;
+ request_module("br_netfilter");
+ }
+
return 0;
}

--
2.19.1


2019-03-27 18:42:36

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 61/87] locking/lockdep: Add debug_locks check in __lock_downgrade()

From: Waiman Long <[email protected]>

[ Upstream commit 71492580571467fb7177aade19c18ce7486267f5 ]

Tetsuo Handa had reported he saw an incorrect "downgrading a read lock"
warning right after a previous lockdep warning. It is likely that the
previous warning turned off lock debugging causing the lockdep to have
inconsistency states leading to the lock downgrade warning.

Fix that by add a check for debug_locks at the beginning of
__lock_downgrade().

Debugged-by: Tetsuo Handa <[email protected]>
Reported-by: Tetsuo Handa <[email protected]>
Reported-by: [email protected]
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul E. McKenney <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/locking/lockdep.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 26fc428476b9..d5b779d7e79f 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3446,6 +3446,9 @@ __lock_set_class(struct lockdep_map *lock, const char *name,
unsigned int depth;
int i;

+ if (unlikely(!debug_locks))
+ return 0;
+
depth = curr->lockdep_depth;
/*
* This function is about (re)setting the class of a held lock,
--
2.19.1


2019-03-27 18:42:39

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 65/87] mt7601u: bump supported EEPROM version

From: Stanislaw Gruszka <[email protected]>

[ Upstream commit 3bd1505fed71d834f45e87b32ff07157fdda47e0 ]

As reported by Michael eeprom 0d is supported and work with the driver.

Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param
with 0d EEPORM looks like this:

RSSI offset: 0 0
Reference temp: f9
LNA gain: 8
Reg channels: 1-14
Per rate power:
raw:05 bw20:05 bw40:05
raw:05 bw20:05 bw40:05
raw:03 bw20:03 bw40:03
raw:03 bw20:03 bw40:03
raw:04 bw20:04 bw40:04
raw:00 bw20:00 bw40:00
raw:00 bw20:00 bw40:00
raw:00 bw20:00 bw40:00
raw:02 bw20:02 bw40:02
raw:00 bw20:00 bw40:00
Per channel power:
tx_power ch1:09 ch2:09
tx_power ch3:0a ch4:0a
tx_power ch5:0a ch6:0a
tx_power ch7:0b ch8:0b
tx_power ch9:0b ch10:0b
tx_power ch11:0b ch12:0b
tx_power ch13:0b ch14:0b

Reported-and-tested-by: Michael <[email protected]>
Signed-off-by: Stanislaw Gruszka <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt7601u/eeprom.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/eeprom.h b/drivers/net/wireless/mediatek/mt7601u/eeprom.h
index 662d12703b69..57b503ae63f1 100644
--- a/drivers/net/wireless/mediatek/mt7601u/eeprom.h
+++ b/drivers/net/wireless/mediatek/mt7601u/eeprom.h
@@ -17,7 +17,7 @@

struct mt7601u_dev;

-#define MT7601U_EE_MAX_VER 0x0c
+#define MT7601U_EE_MAX_VER 0x0d
#define MT7601U_EEPROM_SIZE 256

#define MT7601U_DEFAULT_TX_POWER 6
--
2.19.1


2019-03-27 18:42:58

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 75/87] dmaengine: imx-dma: fix warning comparison of distinct pointer types

From: Anders Roxell <[email protected]>

[ Upstream commit 9227ab5643cb8350449502dd9e3168a873ab0e3b ]

The warning got introduced by commit 930507c18304 ("arm64: add basic
Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning
haven't been seen before since size_t was 'unsigned int' when built on
arm32.

../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’:
../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^~
../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’
__builtin_choose_expr(__safe_cmp(x, y), \
^~~~~~~~~~
../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’
#define min(x, y) __careful_cmp(x, y, <)
^~~~~~~~~~~~~
../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’
now = min(d->len, sg_dma_len(sg));
^~~

Rework so that we use min_t and pass in the size_t that returns the
minimum of two values, using the specified type.

Signed-off-by: Anders Roxell <[email protected]>
Acked-by: Olof Johansson <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/imx-dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index 1cfa1d9bc971..f8786f60cdc1 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -290,7 +290,7 @@ static inline int imxdma_sg_next(struct imxdma_desc *d)
struct scatterlist *sg = d->sg;
unsigned long now;

- now = min(d->len, sg_dma_len(sg));
+ now = min_t(size_t, d->len, sg_dma_len(sg));
if (d->len != IMX_DMA_LENGTH_LOOP)
d->len -= now;

--
2.19.1


2019-03-27 18:43:07

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 73/87] Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer

From: Marcel Holtmann <[email protected]>

[ Upstream commit 7c9cbd0b5e38a1672fcd137894ace3b042dfbf69 ]

The function l2cap_get_conf_opt will return L2CAP_CONF_OPT_SIZE + opt->len
as length value. The opt->len however is in control over the remote user
and can be used by an attacker to gain access beyond the bounds of the
actual packet.

To prevent any potential leak of heap memory, it is enough to check that
the resulting len calculation after calling l2cap_get_conf_opt is not
below zero. A well formed packet will always return >= 0 here and will
end with the length value being zero after the last option has been
parsed. In case of malformed packets messing with the opt->len field the
length value will become negative. If that is the case, then just abort
and ignore the option.

In case an attacker uses a too short opt->len value, then garbage will
be parsed, but that is protected by the unknown option handling and also
the option parameter size checks.

Signed-off-by: Marcel Holtmann <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/bluetooth/l2cap_core.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 1fc23cb4a3e0..bf7a2846a85f 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3326,6 +3326,8 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data, size_t data

while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&req, &type, &olen, &val);
+ if (len < 0)
+ break;

hint = type & L2CAP_CONF_HINT;
type &= L2CAP_CONF_MASK;
@@ -3537,6 +3539,8 @@ static int l2cap_parse_conf_rsp(struct l2cap_chan *chan, void *rsp, int len,

while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
+ if (len < 0)
+ break;

switch (type) {
case L2CAP_CONF_MTU:
@@ -3717,6 +3721,8 @@ static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len)

while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
+ if (len < 0)
+ break;

switch (type) {
case L2CAP_CONF_RFC:
--
2.19.1


2019-03-27 18:43:14

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 56/87] iw_cxgb4: fix srqidx leak during connection abort

From: Raju Rangoju <[email protected]>

[ Upstream commit f368ff188ae4b3ef6f740a15999ea0373261b619 ]

When an application aborts the connection by moving QP from RTS to ERROR,
then iw_cxgb4's modify_rc_qp() RTS->ERROR logic sets the
*srqidxp to 0 via t4_set_wq_in_error(&qhp->wq, 0), and aborts the
connection by calling c4iw_ep_disconnect().

c4iw_ep_disconnect() does the following:
1. sends up a close_complete_upcall(ep, -ECONNRESET) to libcxgb4.
2. sends abort request CPL to hw.

But, since the close_complete_upcall() is sent before sending the
ABORT_REQ to hw, libcxgb4 would fail to release the srqidx if the
connection holds one. Because, the srqidx is passed up to libcxgb4 only
after corresponding ABORT_RPL is processed by kernel in abort_rpl().

This patch handle the corner-case by moving the call to
close_complete_upcall() from c4iw_ep_disconnect() to abort_rpl(). So that
libcxgb4 is notified about the -ECONNRESET only after abort_rpl(), and
libcxgb4 can relinquish the srqidx properly.

Signed-off-by: Raju Rangoju <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/cxgb4/cm.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index dd18b74cd01d..a2322b2dbd82 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -1872,8 +1872,10 @@ static int abort_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
}
mutex_unlock(&ep->com.mutex);

- if (release)
+ if (release) {
+ close_complete_upcall(ep, -ECONNRESET);
release_ep_resources(ep);
+ }
c4iw_put_ep(&ep->com);
return 0;
}
@@ -3567,7 +3569,6 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
if (close) {
if (abrupt) {
set_bit(EP_DISC_ABORT, &ep->com.history);
- close_complete_upcall(ep, -ECONNRESET);
ret = send_abort(ep);
} else {
set_bit(EP_DISC_CLOSE, &ep->com.history);
--
2.19.1


2019-03-27 18:43:15

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 58/87] cdrom: Fix race condition in cdrom_sysctl_register

From: Guenter Roeck <[email protected]>

[ Upstream commit f25191bb322dec8fa2979ecb8235643aa42470e1 ]

The following traceback is sometimes seen when booting an image in qemu:

[ 54.608293] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 54.611085] Fusion MPT base driver 3.04.20
[ 54.611877] Copyright (c) 1999-2008 LSI Corporation
[ 54.616234] Fusion MPT SAS Host driver 3.04.20
[ 54.635139] sysctl duplicate entry: /dev/cdrom//info
[ 54.639578] CPU: 0 PID: 266 Comm: kworker/u4:5 Not tainted 5.0.0-rc5 #1
[ 54.639578] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 54.641273] Workqueue: events_unbound async_run_entry_fn
[ 54.641273] Call Trace:
[ 54.641273] dump_stack+0x67/0x90
[ 54.641273] __register_sysctl_table+0x50b/0x570
[ 54.641273] ? rcu_read_lock_sched_held+0x6f/0x80
[ 54.641273] ? kmem_cache_alloc_trace+0x1c7/0x1f0
[ 54.646814] __register_sysctl_paths+0x1c8/0x1f0
[ 54.646814] cdrom_sysctl_register.part.7+0xc/0x5f
[ 54.646814] register_cdrom.cold.24+0x2a/0x33
[ 54.646814] sr_probe+0x4bd/0x580
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] really_probe+0xd6/0x260
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] driver_probe_device+0x4a/0xb0
[ 54.646814] ? __driver_attach+0xd0/0xd0
[ 54.646814] bus_for_each_drv+0x73/0xc0
[ 54.646814] __device_attach+0xd6/0x130
[ 54.646814] bus_probe_device+0x9a/0xb0
[ 54.646814] device_add+0x40c/0x670
[ 54.646814] ? __pm_runtime_resume+0x4f/0x80
[ 54.646814] scsi_sysfs_add_sdev+0x81/0x290
[ 54.646814] scsi_probe_and_add_lun+0x888/0xc00
[ 54.646814] ? scsi_autopm_get_host+0x21/0x40
[ 54.646814] __scsi_add_device+0x116/0x130
[ 54.646814] ata_scsi_scan_host+0x93/0x1c0
[ 54.646814] async_run_entry_fn+0x34/0x100
[ 54.646814] process_one_work+0x237/0x5e0
[ 54.646814] worker_thread+0x37/0x380
[ 54.646814] ? rescuer_thread+0x360/0x360
[ 54.646814] kthread+0x118/0x130
[ 54.646814] ? kthread_create_on_node+0x60/0x60
[ 54.646814] ret_from_fork+0x3a/0x50

The only sensible explanation is that cdrom_sysctl_register() is called
twice, once from the module init function and once from register_cdrom().
cdrom_sysctl_register() is not mutex protected and may happily execute
twice if the second call is made before the first call is complete.

Use a static atomic to ensure that the function is executed exactly once.

Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cdrom/cdrom.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index ff4280800cd0..a46f188f679e 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -265,6 +265,7 @@
/* #define ERRLOGMASK (CD_WARNING|CD_OPEN|CD_COUNT_TRACKS|CD_CLOSE) */
/* #define ERRLOGMASK (CD_WARNING|CD_REG_UNREG|CD_DO_IOCTL|CD_OPEN|CD_CLOSE|CD_COUNT_TRACKS) */

+#include <linux/atomic.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/major.h>
@@ -3683,9 +3684,9 @@ static struct ctl_table_header *cdrom_sysctl_header;

static void cdrom_sysctl_register(void)
{
- static int initialized;
+ static atomic_t initialized = ATOMIC_INIT(0);

- if (initialized == 1)
+ if (!atomic_add_unless(&initialized, 1, 1))
return;

cdrom_sysctl_header = register_sysctl_table(cdrom_root_table);
@@ -3696,8 +3697,6 @@ static void cdrom_sysctl_register(void)
cdrom_sysctl_settings.debug = debug;
cdrom_sysctl_settings.lock = lockdoor;
cdrom_sysctl_settings.check = check_media_type;
-
- initialized = 1;
}

static void cdrom_sysctl_unregister(void)
--
2.19.1


2019-03-27 18:43:22

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 71/87] soc/tegra: fuse: Fix illegal free of IO base address

From: Timo Alho <[email protected]>

[ Upstream commit 51294bf6b9e897d595466dcda5a3f2751906a200 ]

On cases where device tree entries for fuse and clock provider are in
different order, fuse driver needs to defer probing. This leads to
freeing incorrect IO base address as the fuse->base variable gets
overwritten once during first probe invocation. This leads to the
following spew during boot:

[ 3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94)
[ 3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8
[ 3.082318] Modules linked in:
[ 3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S 4.19.7-tegra-gce119d3 #1
[ 3.082340] Hardware name: quill (DT)
[ 3.082353] Workqueue: events deferred_probe_work_func
[ 3.082364] pstate: 40000005 (nZcv daif -PAN -UAO)
[ 3.082372] pc : __vunmap+0xcc/0xd8
[ 3.082379] lr : __vunmap+0xcc/0xd8
[ 3.082385] sp : ffff00000a1d3b60
[ 3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000
[ 3.082402] x27: 0000000000000000 x26: ffff000008e8b610
[ 3.082413] x25: 0000000000000000 x24: 0000000000000009
[ 3.082423] x23: ffff000009221a90 x22: ffff000009f6d000
[ 3.082432] x21: 0000000000000000 x20: 0000000000000000
[ 3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff
[ 3.082452] x17: 0000000000000000 x16: 0000000000000000
[ 3.082462] x15: ffff0000091396c8 x14: 0720072007200720
[ 3.082471] x13: 0720072007200720 x12: 0720072907340739
[ 3.082481] x11: 0764076607380765 x10: 0766076307300730
[ 3.082491] x9 : 0730073007300730 x8 : 0730073007280720
[ 3.082501] x7 : 0761076507720761 x6 : 0000000000000102
[ 3.082510] x5 : 0000000000000000 x4 : 0000000000000000
[ 3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8
[ 3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000
[ 3.082538] Call trace:
[ 3.082545] __vunmap+0xcc/0xd8
[ 3.082552] vunmap+0x24/0x30
[ 3.082561] __iounmap+0x2c/0x38
[ 3.082569] tegra_fuse_probe+0xc8/0x118
[ 3.082577] platform_drv_probe+0x50/0xa0
[ 3.082585] really_probe+0x1b0/0x288
[ 3.082593] driver_probe_device+0x58/0x100
[ 3.082601] __device_attach_driver+0x98/0xf0
[ 3.082609] bus_for_each_drv+0x64/0xc8
[ 3.082616] __device_attach+0xd8/0x130
[ 3.082624] device_initial_probe+0x10/0x18
[ 3.082631] bus_probe_device+0x90/0x98
[ 3.082638] deferred_probe_work_func+0x74/0xb0
[ 3.082649] process_one_work+0x1e0/0x318
[ 3.082656] worker_thread+0x228/0x450
[ 3.082664] kthread+0x128/0x130
[ 3.082672] ret_from_fork+0x10/0x18
[ 3.082678] ---[ end trace 0810fe6ba772c1c7 ]---

Fix this by retaining the value of fuse->base until driver has
successfully probed.

Signed-off-by: Timo Alho <[email protected]>
Acked-by: Jon Hunter <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/tegra/fuse/fuse-tegra.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index de2c1bfe28b5..c4f5e5bbb8dc 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -131,13 +131,17 @@ static int tegra_fuse_probe(struct platform_device *pdev)
/* take over the memory region from the early initialization */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
fuse->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(fuse->base))
- return PTR_ERR(fuse->base);
+ if (IS_ERR(fuse->base)) {
+ err = PTR_ERR(fuse->base);
+ fuse->base = base;
+ return err;
+ }

fuse->clk = devm_clk_get(&pdev->dev, "fuse");
if (IS_ERR(fuse->clk)) {
dev_err(&pdev->dev, "failed to get FUSE clock: %ld",
PTR_ERR(fuse->clk));
+ fuse->base = base;
return PTR_ERR(fuse->clk);
}

@@ -146,8 +150,10 @@ static int tegra_fuse_probe(struct platform_device *pdev)

if (fuse->soc->probe) {
err = fuse->soc->probe(fuse);
- if (err < 0)
+ if (err < 0) {
+ fuse->base = base;
return err;
+ }
}

if (tegra_fuse_create_sysfs(&pdev->dev, fuse->soc->info->size,
--
2.19.1


2019-03-27 18:43:23

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 55/87] genirq: Avoid summation loops for /proc/stat

From: Thomas Gleixner <[email protected]>

[ Upstream commit 1136b0728969901a091f0471968b2b76ed14d9ad ]

Waiman reported that on large systems with a large amount of interrupts the
readout of /proc/stat takes a long time to sum up the interrupt
statistics. In principle this is not a problem. but for unknown reasons
some enterprise quality software reads /proc/stat with a high frequency.

The reason for this is that interrupt statistics are accounted per cpu. So
the /proc/stat logic has to sum up the interrupt stats for each interrupt.

This can be largely avoided for interrupts which are not marked as
'PER_CPU' interrupts by simply adding a per interrupt summation counter
which is incremented along with the per interrupt per cpu counter.

The PER_CPU interrupts need to avoid that and use only per cpu accounting
because they share the interrupt number and the interrupt descriptor and
concurrent updates would conflict or require unwanted synchronization.

Reported-by: Waiman Long <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Waiman Long <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Reviewed-by: Davidlohr Bueso <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: [email protected]
Cc: Davidlohr Bueso <[email protected]>
Cc: Miklos Szeredi <[email protected]>
Cc: Daniel Colascione <[email protected]>
Cc: Dave Chinner <[email protected]>
Cc: Randy Dunlap <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

8<-------------

v2: Undo the unintentional layout change of struct irq_desc.

include/linux/irqdesc.h | 1 +
kernel/irq/chip.c | 12 ++++++++++--
kernel/irq/internals.h | 8 +++++++-
kernel/irq/irqdesc.c | 7 ++++++-
4 files changed, 24 insertions(+), 4 deletions(-)

Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/irqdesc.h | 1 +
kernel/irq/chip.c | 12 ++++++++++--
kernel/irq/internals.h | 8 +++++++-
kernel/irq/irqdesc.c | 7 ++++++-
4 files changed, 24 insertions(+), 4 deletions(-)

diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index c9be57931b58..bb5547a83daf 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -61,6 +61,7 @@ struct irq_desc {
unsigned int core_internal_state__do_not_mess_with_it;
unsigned int depth; /* nested irq disables */
unsigned int wake_depth; /* nested wake enables */
+ unsigned int tot_count;
unsigned int irq_count; /* For detecting broken IRQs */
unsigned long last_unhandled; /* Aging timer for unhandled count */
unsigned int irqs_unhandled;
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index f30110e1b8c9..9e745cc0726d 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -729,7 +729,11 @@ void handle_percpu_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);

- kstat_incr_irqs_this_cpu(desc);
+ /*
+ * PER CPU interrupts are not serialized. Do not touch
+ * desc->tot_count.
+ */
+ __kstat_incr_irqs_this_cpu(desc);

if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
@@ -758,7 +762,11 @@ void handle_percpu_devid_irq(struct irq_desc *desc)
unsigned int irq = irq_desc_get_irq(desc);
irqreturn_t res;

- kstat_incr_irqs_this_cpu(desc);
+ /*
+ * PER CPU interrupts are not serialized. Do not touch
+ * desc->tot_count.
+ */
+ __kstat_incr_irqs_this_cpu(desc);

if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index bc226e783bd2..22e3f29a30d8 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -199,12 +199,18 @@ static inline bool irqd_has_set(struct irq_data *d, unsigned int mask)

#undef __irqd_to_state

-static inline void kstat_incr_irqs_this_cpu(struct irq_desc *desc)
+static inline void __kstat_incr_irqs_this_cpu(struct irq_desc *desc)
{
__this_cpu_inc(*desc->kstat_irqs);
__this_cpu_inc(kstat.irqs_sum);
}

+static inline void kstat_incr_irqs_this_cpu(struct irq_desc *desc)
+{
+ __kstat_incr_irqs_this_cpu(desc);
+ desc->tot_count++;
+}
+
static inline int irq_desc_get_node(struct irq_desc *desc)
{
return irq_common_data_get_node(&desc->irq_common_data);
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 77977f55dff7..5e0ea17d01a6 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -109,6 +109,7 @@ static void desc_set_defaults(unsigned int irq, struct irq_desc *desc, int node,
desc->depth = 1;
desc->irq_count = 0;
desc->irqs_unhandled = 0;
+ desc->tot_count = 0;
desc->name = NULL;
desc->owner = owner;
for_each_possible_cpu(cpu)
@@ -880,11 +881,15 @@ unsigned int kstat_irqs_cpu(unsigned int irq, int cpu)
unsigned int kstat_irqs(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
- int cpu;
unsigned int sum = 0;
+ int cpu;

if (!desc || !desc->kstat_irqs)
return 0;
+ if (!irq_settings_is_per_cpu_devid(desc) &&
+ !irq_settings_is_per_cpu(desc))
+ return desc->tot_count;
+
for_each_possible_cpu(cpu)
sum += *per_cpu_ptr(desc->kstat_irqs, cpu);
return sum;
--
2.19.1


2019-03-27 18:43:24

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 64/87] soc: qcom: gsbi: Fix error handling in gsbi_probe()

From: Alexey Khoroshilov <[email protected]>

[ Upstream commit 8cd09a3dd3e176c62da67efcd477a44a8d87185e ]

If of_platform_populate() fails in gsbi_probe(),
gsbi->hclk is left undisabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Andy Gross <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/qcom/qcom_gsbi.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c
index 09c669e70d63..038abc377fdb 100644
--- a/drivers/soc/qcom/qcom_gsbi.c
+++ b/drivers/soc/qcom/qcom_gsbi.c
@@ -138,7 +138,7 @@ static int gsbi_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
struct gsbi_info *gsbi;
- int i;
+ int i, ret;
u32 mask, gsbi_num;
const struct crci_config *config = NULL;

@@ -221,7 +221,10 @@ static int gsbi_probe(struct platform_device *pdev)

platform_set_drvdata(pdev, gsbi);

- return of_platform_populate(node, NULL, NULL, &pdev->dev);
+ ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
+ if (ret)
+ clk_disable_unprepare(gsbi->hclk);
+ return ret;
}

static int gsbi_remove(struct platform_device *pdev)
--
2.19.1


2019-03-27 18:43:27

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 52/87] bcache: fix input overflow to cache set sysfs file io_error_halflife

From: Coly Li <[email protected]>

[ Upstream commit a91fbda49f746119828f7e8ad0f0aa2ab0578f65 ]

Cache set sysfs entry io_error_halflife is used to set c->error_decay.
c->error_decay is in type unsigned int, and it is converted by
strtoul_or_return(), therefore overflow to c->error_decay is possible
for a large input value.

This patch fixes the overflow by using strtoul_safe_clamp() to convert
input string to an unsigned long value in range [0, UINT_MAX], then
divides by 88 and set it to c->error_decay.

Signed-off-by: Coly Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/bcache/sysfs.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 5a5c1f1bd8a5..87daccbbc61b 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -645,8 +645,17 @@ STORE(__bch_cache_set)
c->error_limit = strtoul_or_return(buf) << IO_ERROR_SHIFT;

/* See count_io_errors() for why 88 */
- if (attr == &sysfs_io_error_halflife)
- c->error_decay = strtoul_or_return(buf) / 88;
+ if (attr == &sysfs_io_error_halflife) {
+ unsigned long v = 0;
+ ssize_t ret;
+
+ ret = strtoul_safe_clamp(buf, v, 0, UINT_MAX);
+ if (!ret) {
+ c->error_decay = v / 88;
+ return size;
+ }
+ return ret;
+ }

sysfs_strtoul(journal_delay_ms, c->journal_delay_ms);
sysfs_strtoul(verify, c->verify);
--
2.19.1


2019-03-27 18:43:38

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 70/87] hwrng: virtio - Avoid repeated init of completion

From: David Tolnay <[email protected]>

[ Upstream commit aef027db48da56b6f25d0e54c07c8401ada6ce21 ]

The virtio-rng driver uses a completion called have_data to wait for a
virtio read to be fulfilled by the hypervisor. The completion is reset
before placing a buffer on the virtio queue and completed by the virtio
callback once data has been written into the buffer.

Prior to this commit, the driver called init_completion on this
completion both during probe as well as when registering virtio buffers
as part of a hwrng read operation. The second of these init_completion
calls should instead be reinit_completion because the have_data
completion has already been inited by probe. As described in
Documentation/scheduler/completion.txt, "Calling init_completion() twice
on the same completion object is most likely a bug".

This bug was present in the initial implementation of virtio-rng in
f7f510ec1957 ("virtio: An entropy device, as suggested by hpa"). Back
then the have_data completion was a single static completion rather than
a member of one of potentially multiple virtrng_info structs as
implemented later by 08e53fbdb85c ("virtio-rng: support multiple
virtio-rng devices"). The original driver incorrectly used
init_completion rather than INIT_COMPLETION to reset have_data during
read.

Tested by running `head -c48 /dev/random | hexdump` within crosvm, the
Chrome OS virtual machine monitor, and confirming that the virtio-rng
driver successfully produces random bytes from the host.

Signed-off-by: David Tolnay <[email protected]>
Tested-by: David Tolnay <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/char/hw_random/virtio-rng.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 3fa2f8a009b3..1c5c4314c6b5 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -73,7 +73,7 @@ static int virtio_read(struct hwrng *rng, void *buf, size_t size, bool wait)

if (!vi->busy) {
vi->busy = true;
- init_completion(&vi->have_data);
+ reinit_completion(&vi->have_data);
register_buffer(vi, buf, size);
}

--
2.19.1


2019-03-27 18:43:50

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 48/87] kprobes: Prohibit probing on bsearch()

From: Andrea Righi <[email protected]>

[ Upstream commit 02106f883cd745523f7766d90a739f983f19e650 ]

Since kprobe breakpoing handler is using bsearch(), probing on this
routine can cause recursive breakpoint problem.

int3
->do_int3()
->ftrace_int3_handler()
->ftrace_location()
->ftrace_location_range()
->bsearch() -> int3

Prohibit probing on bsearch().

Signed-off-by: Andrea Righi <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/154998813406.31052.8791425358974650922.stgit@devbox
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/bsearch.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/lib/bsearch.c b/lib/bsearch.c
index e33c179089db..d50048446b77 100644
--- a/lib/bsearch.c
+++ b/lib/bsearch.c
@@ -11,6 +11,7 @@

#include <linux/export.h>
#include <linux/bsearch.h>
+#include <linux/kprobes.h>

/*
* bsearch - binary search an array of elements
@@ -51,3 +52,4 @@ void *bsearch(const void *key, const void *base, size_t num, size_t size,
return NULL;
}
EXPORT_SYMBOL(bsearch);
+NOKPROBE_SYMBOL(bsearch);
--
2.19.1


2019-03-27 18:44:02

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 60/87] ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe

From: wen yang <[email protected]>

[ Upstream commit 11907e9d3533648615db08140e3045b829d2c141 ]

The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.

Signed-off-by: Wen Yang <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Nicolin Chen <[email protected]>
Cc: Xiubo Li <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/fsl-asoc-card.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index dffd549a0e2a..705d2524ec31 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -689,6 +689,7 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
asrc_fail:
of_node_put(asrc_np);
of_node_put(codec_np);
+ put_device(&cpu_pdev->dev);
fail:
of_node_put(cpu_np);

--
2.19.1


2019-03-27 18:44:14

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 45/87] leds: lp55xx: fix null deref on firmware load failure

From: Michal Kazior <[email protected]>

[ Upstream commit 5ddb0869bfc1bca6cfc592c74c64a026f936638c ]

I've stumbled upon a kernel crash and the logs
pointed me towards the lp5562 driver:

> <4>[306013.841294] lp5562 0-0030: Direct firmware load for lp5562 failed with error -2
> <4>[306013.894990] lp5562 0-0030: Falling back to user helper
> ...
> <3>[306073.924886] lp5562 0-0030: firmware request failed
> <1>[306073.939456] Unable to handle kernel NULL pointer dereference at virtual address 00000000
> <4>[306074.251011] PC is at _raw_spin_lock+0x1c/0x58
> <4>[306074.255539] LR is at release_firmware+0x6c/0x138
> ...

After taking a look I noticed firmware_release()
could be called with either NULL or a dangling
pointer.

Fixes: 10c06d178df11 ("leds-lp55xx: support firmware interface")
Signed-off-by: Michal Kazior <[email protected]>
Signed-off-by: Jacek Anaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/leds/leds-lp55xx-common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 5377f22ff994..e2655953667c 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -201,7 +201,7 @@ static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)

if (!fw) {
dev_err(dev, "firmware request failed\n");
- goto out;
+ return;
}

/* handling firmware data is chip dependent */
@@ -214,9 +214,9 @@ static void lp55xx_firmware_loaded(const struct firmware *fw, void *context)

mutex_unlock(&chip->lock);

-out:
/* firmware should be released for other channel use */
release_firmware(chip->fw);
+ chip->fw = NULL;
}

static int lp55xx_request_firmware(struct lp55xx_chip *chip)
--
2.19.1


2019-03-27 18:44:18

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 57/87] fbdev: fbmem: fix memory access if logo is bigger than the screen

From: Manfred Schlaegl <[email protected]>

[ Upstream commit a5399db139cb3ad9b8502d8b1bd02da9ce0b9df0 ]

There is no clipping on the x or y axis for logos larger that the framebuffer
size. Therefore: a logo bigger than screen size leads to invalid memory access:

[ 1.254664] Backtrace:
[ 1.254728] [<c02714e0>] (cfb_imageblit) from [<c026184c>] (fb_show_logo+0x620/0x684)
[ 1.254763] r10:00000003 r9:00027fd8 r8:c6a40000 r7:c6a36e50 r6:00000000 r5:c06b81e4
[ 1.254774] r4:c6a3e800
[ 1.254810] [<c026122c>] (fb_show_logo) from [<c026c1e4>] (fbcon_switch+0x3fc/0x46c)
[ 1.254842] r10:c6a3e824 r9:c6a3e800 r8:00000000 r7:c6a0c000 r6:c070b014 r5:c6a3e800
[ 1.254852] r4:c6808c00
[ 1.254889] [<c026bde8>] (fbcon_switch) from [<c029c8f8>] (redraw_screen+0xf0/0x1e8)
[ 1.254918] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:c070d5a0 r5:00000080
[ 1.254928] r4:c6808c00
[ 1.254961] [<c029c808>] (redraw_screen) from [<c029d264>] (do_bind_con_driver+0x194/0x2e4)
[ 1.254991] r9:00000000 r8:00000000 r7:00000014 r6:c070d5a0 r5:c070d5a0 r4:c070d5a0

So prevent displaying a logo bigger than screen size and avoid invalid
memory access.

Signed-off-by: Manfred Schlaegl <[email protected]>
Signed-off-by: Martin Kepplinger <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/video/fbdev/core/fbmem.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index a1d93151c059..c928190666ac 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -425,6 +425,9 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
{
unsigned int x;

+ if (image->width > info->var.xres || image->height > info->var.yres)
+ return;
+
if (rotate == FB_ROTATE_UR) {
for (x = 0;
x < num && image->dx + image->width <= info->var.xres;
--
2.19.1


2019-03-27 18:44:24

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 42/87] media: mx2_emmaprp: Correct return type for mem2mem buffer helpers

From: Ezequiel Garcia <[email protected]>

[ Upstream commit 8d20dcefe471763f23ad538369ec65b51993ffff ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/mx2_emmaprp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c
index e68d271b10af..8354ad20865a 100644
--- a/drivers/media/platform/mx2_emmaprp.c
+++ b/drivers/media/platform/mx2_emmaprp.c
@@ -288,7 +288,7 @@ static void emmaprp_device_run(void *priv)
{
struct emmaprp_ctx *ctx = priv;
struct emmaprp_q_data *s_q_data, *d_q_data;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
struct emmaprp_dev *pcdev = ctx->dev;
unsigned int s_width, s_height;
unsigned int d_width, d_height;
@@ -308,8 +308,8 @@ static void emmaprp_device_run(void *priv)
d_height = d_q_data->height;
d_size = d_width * d_height;

- p_in = vb2_dma_contig_plane_dma_addr(src_buf, 0);
- p_out = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+ p_in = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
+ p_out = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
if (!p_in || !p_out) {
v4l2_err(&pcdev->v4l2_dev,
"Acquiring kernel pointers to buffers failed\n");
--
2.19.1


2019-03-27 18:44:25

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 44/87] HID: intel-ish-hid: avoid binding wrong ishtp_cl_device

From: Hong Liu <[email protected]>

[ Upstream commit 0d28f49412405d87d3aae83da255070a46e67627 ]

When performing a warm reset in ishtp bus driver, the ishtp_cl_device
will not be removed, its fw_client still points to the already freed
ishtp_device.fw_clients array.

Later after driver finishing ishtp client enumeration, this dangling
pointer may cause driver to bind the wrong ishtp_cl_device to the new
client, causing wrong callback to be called for messages intended for
the new client.

This helps in development of firmware where frequent switching of
firmwares is required without Linux reboot.

Signed-off-by: Hong Liu <[email protected]>
Tested-by: Hongyan Song <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/intel-ish-hid/ishtp/bus.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/intel-ish-hid/ishtp/bus.c b/drivers/hid/intel-ish-hid/ishtp/bus.c
index 256521509d20..0de18c76f8d4 100644
--- a/drivers/hid/intel-ish-hid/ishtp/bus.c
+++ b/drivers/hid/intel-ish-hid/ishtp/bus.c
@@ -628,7 +628,8 @@ int ishtp_cl_device_bind(struct ishtp_cl *cl)
spin_lock_irqsave(&cl->dev->device_list_lock, flags);
list_for_each_entry(cl_device, &cl->dev->device_list,
device_link) {
- if (cl_device->fw_client->client_id == cl->fw_client_id) {
+ if (cl_device->fw_client &&
+ cl_device->fw_client->client_id == cl->fw_client_id) {
cl->device = cl_device;
rv = 0;
break;
@@ -688,6 +689,7 @@ void ishtp_bus_remove_all_clients(struct ishtp_device *ishtp_dev,
spin_lock_irqsave(&ishtp_dev->device_list_lock, flags);
list_for_each_entry_safe(cl_device, n, &ishtp_dev->device_list,
device_link) {
+ cl_device->fw_client = NULL;
if (warm_reset && cl_device->reference_count)
continue;

--
2.19.1


2019-03-27 18:44:31

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 40/87] media: s5p-jpeg: Correct return type for mem2mem buffer helpers

From: Ezequiel Garcia <[email protected]>

[ Upstream commit 4a88f89885c7cf65c62793f385261a6e3315178a ]

Fix the assigned type of mem2mem buffer handling API.
Namely, these functions:

v4l2_m2m_next_buf
v4l2_m2m_last_buf
v4l2_m2m_buf_remove
v4l2_m2m_next_src_buf
v4l2_m2m_next_dst_buf
v4l2_m2m_last_src_buf
v4l2_m2m_last_dst_buf
v4l2_m2m_src_buf_remove
v4l2_m2m_dst_buf_remove

return a struct vb2_v4l2_buffer, and not a struct vb2_buffer.

Fixing this is necessary to fix the mem2mem buffer handling API,
changing the return to the correct struct vb2_v4l2_buffer instead
of a void pointer.

Signed-off-by: Ezequiel Garcia <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/media/platform/s5p-jpeg/jpeg-core.c | 38 ++++++++++-----------
1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 1da2c94e1dca..06e2b72d07ca 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -789,14 +789,14 @@ static void skip(struct s5p_jpeg_buffer *buf, long len);
static void exynos4_jpeg_parse_decode_h_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
unsigned int word;
int c, x, components;

jpeg_buffer.size = 2; /* Ls */
jpeg_buffer.data =
- (unsigned long)vb2_plane_vaddr(vb, 0) + ctx->out_q.sos + 2;
+ (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) + ctx->out_q.sos + 2;
jpeg_buffer.curr = 0;

word = 0;
@@ -826,14 +826,14 @@ static void exynos4_jpeg_parse_decode_h_tbl(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_parse_huff_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
unsigned int word;
int c, i, n, j;

for (j = 0; j < ctx->out_q.dht.n; ++j) {
jpeg_buffer.size = ctx->out_q.dht.len[j];
- jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(vb, 0) +
+ jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) +
ctx->out_q.dht.marker[j];
jpeg_buffer.curr = 0;

@@ -885,13 +885,13 @@ static void exynos4_jpeg_parse_huff_tbl(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_parse_decode_q_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
int c, x, components;

jpeg_buffer.size = ctx->out_q.sof_len;
jpeg_buffer.data =
- (unsigned long)vb2_plane_vaddr(vb, 0) + ctx->out_q.sof;
+ (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) + ctx->out_q.sof;
jpeg_buffer.curr = 0;

skip(&jpeg_buffer, 5); /* P, Y, X */
@@ -916,14 +916,14 @@ static void exynos4_jpeg_parse_decode_q_tbl(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_parse_q_tbl(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+ struct vb2_v4l2_buffer *vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
struct s5p_jpeg_buffer jpeg_buffer;
unsigned int word;
int c, i, j;

for (j = 0; j < ctx->out_q.dqt.n; ++j) {
jpeg_buffer.size = ctx->out_q.dqt.len[j];
- jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(vb, 0) +
+ jpeg_buffer.data = (unsigned long)vb2_plane_vaddr(&vb->vb2_buf, 0) +
ctx->out_q.dqt.marker[j];
jpeg_buffer.curr = 0;

@@ -2027,15 +2027,15 @@ static void s5p_jpeg_device_run(void *priv)
{
struct s5p_jpeg_ctx *ctx = priv;
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *src_buf, *dst_buf;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
unsigned long src_addr, dst_addr, flags;

spin_lock_irqsave(&ctx->jpeg->slock, flags);

src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
- src_addr = vb2_dma_contig_plane_dma_addr(src_buf, 0);
- dst_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+ src_addr = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
+ dst_addr = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);

s5p_jpeg_reset(jpeg->regs);
s5p_jpeg_poweron(jpeg->regs);
@@ -2108,7 +2108,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
struct s5p_jpeg_fmt *fmt;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
struct s5p_jpeg_addr jpeg_addr = {};
u32 pix_size, padding_bytes = 0;

@@ -2127,7 +2127,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
vb = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
}

- jpeg_addr.y = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr.y = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);

if (fmt->colplanes == 2) {
jpeg_addr.cb = jpeg_addr.y + pix_size - padding_bytes;
@@ -2145,7 +2145,7 @@ static void exynos4_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
static void exynos4_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
unsigned int jpeg_addr = 0;

if (ctx->mode == S5P_JPEG_ENCODE)
@@ -2153,7 +2153,7 @@ static void exynos4_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
else
vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);

- jpeg_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);
if (jpeg->variant->version == SJPEG_EXYNOS5433 &&
ctx->mode == S5P_JPEG_DECODE)
jpeg_addr += ctx->out_q.sos;
@@ -2268,7 +2268,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
struct s5p_jpeg_fmt *fmt;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
struct s5p_jpeg_addr jpeg_addr = {};
u32 pix_size;

@@ -2282,7 +2282,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
fmt = ctx->cap_q.fmt;
}

- jpeg_addr.y = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr.y = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);

if (fmt->colplanes == 2) {
jpeg_addr.cb = jpeg_addr.y + pix_size;
@@ -2300,7 +2300,7 @@ static void exynos3250_jpeg_set_img_addr(struct s5p_jpeg_ctx *ctx)
static void exynos3250_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
{
struct s5p_jpeg *jpeg = ctx->jpeg;
- struct vb2_buffer *vb;
+ struct vb2_v4l2_buffer *vb;
unsigned int jpeg_addr = 0;

if (ctx->mode == S5P_JPEG_ENCODE)
@@ -2308,7 +2308,7 @@ static void exynos3250_jpeg_set_jpeg_addr(struct s5p_jpeg_ctx *ctx)
else
vb = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);

- jpeg_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+ jpeg_addr = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0);
exynos3250_jpeg_jpgadr(jpeg->regs, jpeg_addr);
}

--
2.19.1


2019-03-27 18:44:57

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 34/87] IB/mlx4: Increase the timeout for CM cache

From: Håkon Bugge <[email protected]>

[ Upstream commit 2612d723aadcf8281f9bf8305657129bd9f3cd57 ]

Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.

Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.

Following the RDMA Connection Manager (CM) protocol, it is clear when
an entry has to evicted form the cache. But life is not perfect,
remote peers may die or be rebooted. Hence, it's a timeout to wipe out
a cache entry, when the PF driver assumes the remote peer has gone.

During workloads where a high number of QPs are destroyed concurrently,
excessive amount of CM DREQ retries has been observed

The problem can be demonstrated in a bare-metal environment, where two
nodes have instantiated 8 VFs each. This using dual ported HCAs, so we
have 16 vPorts per physical server.

64 processes are associated with each vPort and creates and destroys
one QP for each of the remote 64 processes. That is, 1024 QPs per
vPort, all in all 16K QPs. The QPs are created/destroyed using the
CM.

When tearing down these 16K QPs, excessive CM DREQ retries (and
duplicates) are observed. With some cat/paste/awk wizardry on the
infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the
nodes:

cm_rx_duplicates:
dreq 2102
cm_rx_msgs:
drep 1989
dreq 6195
rep 3968
req 4224
rtu 4224
cm_tx_msgs:
drep 4093
dreq 27568
rep 4224
req 3968
rtu 3968
cm_tx_retries:
dreq 23469

Note that the active/passive side is equally distributed between the
two nodes.

Enabling pr_debug in cm.c gives tons of:

[171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave:
1,sl_cm_id: 0xd393089f} is NULL!

By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the
tear-down phase of the application is reduced from approximately 90 to
50 seconds. Retries/duplicates are also significantly reduced:

cm_rx_duplicates:
dreq 2460
[]
cm_tx_retries:
dreq 3010
req 47

Increasing the timeout further didn't help, as these duplicates and
retries stems from a too short CMA timeout, which was 20 (~4 seconds)
on the systems. By increasing the CMA timeout to 22 (~17 seconds), the
numbers fell down to about 10 for both of them.

Adjustment of the CMA timeout is not part of this commit.

Signed-off-by: Håkon Bugge <[email protected]>
Acked-by: Jack Morgenstein <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx4/cm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mlx4/cm.c b/drivers/infiniband/hw/mlx4/cm.c
index 39a488889fc7..5dc920fe1326 100644
--- a/drivers/infiniband/hw/mlx4/cm.c
+++ b/drivers/infiniband/hw/mlx4/cm.c
@@ -39,7 +39,7 @@

#include "mlx4_ib.h"

-#define CM_CLEANUP_CACHE_TIMEOUT (5 * HZ)
+#define CM_CLEANUP_CACHE_TIMEOUT (30 * HZ)

struct id_map_entry {
struct rb_node node;
--
2.19.1


2019-03-27 18:45:04

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 33/87] mlxsw: spectrum: Avoid -Wformat-truncation warnings

From: Florian Fainelli <[email protected]>

[ Upstream commit ab2c4e2581ad32c28627235ff0ae8c5a5ea6899f ]

Give precision identifiers to the two snprintf() formatting the priority
and TC strings to avoid producing these two warnings:

drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function
'mlxsw_sp_port_get_prio_strings':
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:37: warning: '%d'
directive output may be truncated writing between 1 and 3 bytes into a
region of size between 0 and 31 [-Wformat-truncation=]
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:3: note: 'snprintf'
output between 3 and 36 bytes into a destination of size 32
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mlxsw_sp_port_hw_prio_stats[i].str, prio);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function
'mlxsw_sp_port_get_tc_strings':
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:37: warning: '%d'
directive output may be truncated writing between 1 and 11 bytes into a
region of size between 0 and 31 [-Wformat-truncation=]
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~
drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:3: note: 'snprintf'
output between 3 and 44 bytes into a destination of size 32
snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mlxsw_sp_port_hw_tc_stats[i].str, tc);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index 22a5916e477e..cc847e0cac2d 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -1565,7 +1565,7 @@ static void mlxsw_sp_port_get_prio_strings(u8 **p, int prio)
int i;

for (i = 0; i < MLXSW_SP_PORT_HW_PRIO_STATS_LEN; i++) {
- snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
+ snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
mlxsw_sp_port_hw_prio_stats[i].str, prio);
*p += ETH_GSTRING_LEN;
}
@@ -1576,7 +1576,7 @@ static void mlxsw_sp_port_get_tc_strings(u8 **p, int tc)
int i;

for (i = 0; i < MLXSW_SP_PORT_HW_TC_STATS_LEN; i++) {
- snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
+ snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d",
mlxsw_sp_port_hw_tc_stats[i].str, tc);
*p += ETH_GSTRING_LEN;
}
--
2.19.1


2019-03-27 18:45:12

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 50/87] ALSA: PCM: check if ops are defined before suspending PCM

From: Ranjani Sridharan <[email protected]>

[ Upstream commit d9c0b2afe820fa3b3f8258a659daee2cc71ca3ef ]

BE dai links only have internal PCM's and their substream ops may
not be set. Suspending these PCM's will result in their
ops->trigger() being invoked and cause a kernel oops.
So skip suspending PCM's if their ops are NULL.

[ NOTE: this change is required now for following the recent PCM core
change to get rid of snd_pcm_suspend() call. Since DPCM BE takes
the runtime carried from FE while keeping NULL ops, it can hit this
bug. See details at:
https://github.com/thesofproject/linux/pull/582
-- tiwai ]

Signed-off-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/pcm_native.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 3586ab41dec4..4719f7f42aa8 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1339,6 +1339,14 @@ int snd_pcm_suspend_all(struct snd_pcm *pcm)
/* FIXME: the open/close code should lock this as well */
if (substream->runtime == NULL)
continue;
+
+ /*
+ * Skip BE dai link PCM's that are internal and may
+ * not have their substream ops set.
+ */
+ if (!substream->ops)
+ continue;
+
err = snd_pcm_suspend(substream);
if (err < 0 && err != -EBUSY)
return err;
--
2.19.1


2019-03-27 18:45:13

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 25/87] crypto: crypto4xx - add missing of_node_put after of_device_is_available

From: Julia Lawall <[email protected]>

[ Upstream commit 8c2b43d2d85b48a97d2f8279278a4aac5b45f925 ]

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>

Fixes: 5343e674f32fb ("crypto4xx: integrate ppc4xx-rng into crypto4xx")
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/crypto/amcc/crypto4xx_trng.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/amcc/crypto4xx_trng.c b/drivers/crypto/amcc/crypto4xx_trng.c
index 677ca17fd223..368c5599515e 100644
--- a/drivers/crypto/amcc/crypto4xx_trng.c
+++ b/drivers/crypto/amcc/crypto4xx_trng.c
@@ -80,8 +80,10 @@ void ppc4xx_trng_probe(struct crypto4xx_core_device *core_dev)

/* Find the TRNG device node and map it */
trng = of_find_matching_node(NULL, ppc4xx_trng_match);
- if (!trng || !of_device_is_available(trng))
+ if (!trng || !of_device_is_available(trng)) {
+ of_node_put(trng);
return;
+ }

dev->trng_base = of_iomap(trng, 0);
of_node_put(trng);
--
2.19.1


2019-03-27 18:45:20

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 46/87] iwlwifi: pcie: fix emergency path

From: Sara Sharon <[email protected]>

[ Upstream commit c6ac9f9fb98851f47b978a9476594fc3c477a34d ]

Allocator swaps the pending requests with 0 when it starts
working. This means that relying on it n RX path to decide if
to move to emergency is not always a good idea, since it may
be zero, but there are still a lot of unallocated RBs in the
system. Change allocator to decrement the pending requests on
real time. It is more expensive since it accesses the atomic
variable more times, but it gives the RX path a better idea
of the system's status.

Reported-by: Ilan Peer <[email protected]>
Signed-off-by: Sara Sharon <[email protected]>
Fixes: 868a1e863f95 ("iwlwifi: pcie: avoid empty free RB queue")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index e58a50d31d96..c21f8bd32d08 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -475,7 +475,7 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
struct iwl_rb_allocator *rba = &trans_pcie->rba;
struct list_head local_empty;
- int pending = atomic_xchg(&rba->req_pending, 0);
+ int pending = atomic_read(&rba->req_pending);

IWL_DEBUG_RX(trans, "Pending allocation requests = %d\n", pending);

@@ -530,11 +530,13 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
i++;
}

+ atomic_dec(&rba->req_pending);
pending--;
+
if (!pending) {
- pending = atomic_xchg(&rba->req_pending, 0);
+ pending = atomic_read(&rba->req_pending);
IWL_DEBUG_RX(trans,
- "Pending allocation requests = %d\n",
+ "Got more pending allocation requests = %d\n",
pending);
}

@@ -546,12 +548,15 @@ static void iwl_pcie_rx_allocator(struct iwl_trans *trans)
spin_unlock(&rba->lock);

atomic_inc(&rba->req_ready);
+
}

spin_lock(&rba->lock);
/* return unused rbds to the allocator empty list */
list_splice_tail(&local_empty, &rba->rbd_empty);
spin_unlock(&rba->lock);
+
+ IWL_DEBUG_RX(trans, "%s, exit.\n", __func__);
}

/*
--
2.19.1


2019-03-27 18:45:32

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 26/87] usb: chipidea: Grab the (legacy) USB PHY by phandle first

From: Paul Kocialkowski <[email protected]>

[ Upstream commit 68ef236274793066b9ba3154b16c0acc1c891e5c ]

According to the chipidea driver bindings, the USB PHY is specified via
the "phys" phandle node. However, this only takes effect for USB PHYs
that use the common PHY framework. For legacy USB PHYs, a simple lookup
based on the USB PHY type is done instead.

This does not play out well when more than one USB PHY is registered,
since the first registered PHY matching the type will always be
returned regardless of what the driver was bound to.

Fix this by looking up the PHY based on the "phys" phandle node.
Although generic PHYs are rather matched by their "phys-name" and not
the "phys" phandle directly, there is no helper for similar lookup on
legacy PHYs and it's probably not worth the effort to add it.

When no legacy USB PHY is found by phandle, fallback to grabbing any
registered USB2 PHY. This ensures backward compatibility if some users
were actually relying on this mechanism.

Signed-off-by: Paul Kocialkowski <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/chipidea/core.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 64c6af2c8559..e96e3a5808b3 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -901,8 +901,15 @@ static int ci_hdrc_probe(struct platform_device *pdev)
} else if (ci->platdata->usb_phy) {
ci->usb_phy = ci->platdata->usb_phy;
} else {
+ ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, "phys",
+ 0);
ci->phy = devm_phy_get(dev->parent, "usb-phy");
- ci->usb_phy = devm_usb_get_phy(dev->parent, USB_PHY_TYPE_USB2);
+
+ /* Fallback to grabbing any registered USB2 PHY */
+ if (IS_ERR(ci->usb_phy) &&
+ PTR_ERR(ci->usb_phy) != -EPROBE_DEFER)
+ ci->usb_phy = devm_usb_get_phy(dev->parent,
+ USB_PHY_TYPE_USB2);

/* if both generic PHY and USB PHY layers aren't enabled */
if (PTR_ERR(ci->phy) == -ENOSYS &&
--
2.19.1


2019-03-27 18:45:44

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 23/87] tools lib traceevent: Fix buffer overflow in arg_eval

From: Tony Jones <[email protected]>

[ Upstream commit 7c5b019e3a638a5a290b0ec020f6ca83d2ec2aaa ]

Fix buffer overflow observed when running perf test.

The overflow is when trying to evaluate "1ULL << (64 - 1)" which is
resulting in -9223372036854775808 which overflows the 20 character
buffer.

If is possible this bug has been reported before but I still don't see
any fix checked in:

See: https://www.spinics.net/lists/linux-perf-users/msg07714.html

Reported-by: Michael Sartain <[email protected]>
Reported-by: Mathias Krause <[email protected]>
Signed-off-by: Tony Jones <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Fixes: f7d82350e597 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/lib/traceevent/event-parse.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c
index 669475300ba8..700c74b0aed0 100644
--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -2428,7 +2428,7 @@ static int arg_num_eval(struct print_arg *arg, long long *val)
static char *arg_eval (struct print_arg *arg)
{
long long val;
- static char buf[20];
+ static char buf[24];

switch (arg->type) {
case PRINT_ATOM:
--
2.19.1


2019-03-27 18:45:44

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 28/87] coresight: etm4x: Add support to enable ETMv4.2

From: Sai Prakash Ranjan <[email protected]>

[ Upstream commit 5666dfd1d8a45a167f0d8b4ef47ea7f780b1f24a ]

SDM845 has ETMv4.2 and can use the existing etm4x driver.
But the current etm driver checks only for ETMv4.0 and
errors out for other etm4x versions. This patch adds this
missing support to enable SoC's with ETMv4x to use same
driver by checking only the ETM architecture major version
number.

Without this change, we get below error during etm probe:

/ # dmesg | grep etm
[ 6.660093] coresight-etm4x: probe of 7040000.etm failed with error -22
[ 6.666902] coresight-etm4x: probe of 7140000.etm failed with error -22
[ 6.673708] coresight-etm4x: probe of 7240000.etm failed with error -22
[ 6.680511] coresight-etm4x: probe of 7340000.etm failed with error -22
[ 6.687313] coresight-etm4x: probe of 7440000.etm failed with error -22
[ 6.694113] coresight-etm4x: probe of 7540000.etm failed with error -22
[ 6.700914] coresight-etm4x: probe of 7640000.etm failed with error -22
[ 6.707717] coresight-etm4x: probe of 7740000.etm failed with error -22

With this change, etm probe is successful:

/ # dmesg | grep etm
[ 6.659198] coresight-etm4x 7040000.etm: CPU0: ETM v4.2 initialized
[ 6.665848] coresight-etm4x 7140000.etm: CPU1: ETM v4.2 initialized
[ 6.672493] coresight-etm4x 7240000.etm: CPU2: ETM v4.2 initialized
[ 6.679129] coresight-etm4x 7340000.etm: CPU3: ETM v4.2 initialized
[ 6.685770] coresight-etm4x 7440000.etm: CPU4: ETM v4.2 initialized
[ 6.692403] coresight-etm4x 7540000.etm: CPU5: ETM v4.2 initialized
[ 6.699024] coresight-etm4x 7640000.etm: CPU6: ETM v4.2 initialized
[ 6.705646] coresight-etm4x 7740000.etm: CPU7: ETM v4.2 initialized

Signed-off-by: Sai Prakash Ranjan <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Mathieu Poirier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwtracing/coresight/coresight-etm4x.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 4db8d6a4d0cb..da27f8edba50 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -61,7 +61,8 @@ static void etm4_os_unlock(struct etmv4_drvdata *drvdata)

static bool etm4_arch_supported(u8 arch)
{
- switch (arch) {
+ /* Mask out the minor version number */
+ switch (arch & 0xf0) {
case ETM_ARCH_V4:
break;
default:
--
2.19.1


2019-03-27 18:45:47

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 38/87] SoC: imx-sgtl5000: add missing put_device()

From: Wen Yang <[email protected]>

[ Upstream commit 8fa857da9744f513036df1c43ab57f338941ae7d ]

The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.

Detected by coccinelle with the following warnings:
./sound/soc/fsl/imx-sgtl5000.c:169:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
./sound/soc/fsl/imx-sgtl5000.c:177:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.

Signed-off-by: Wen Yang <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Nicolin Chen <[email protected]>
Cc: Xiubo Li <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/fsl/imx-sgtl5000.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index b99e0b5e00e9..8e525f7ac08d 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -115,6 +115,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
ret = -EPROBE_DEFER;
goto fail;
}
+ put_device(&ssi_pdev->dev);
codec_dev = of_find_i2c_device_by_node(codec_np);
if (!codec_dev) {
dev_err(&pdev->dev, "failed to find codec platform device\n");
--
2.19.1


2019-03-27 18:45:54

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 20/87] fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes

From: Slavomir Kaslev <[email protected]>

[ Upstream commit ee5e001196d1345b8fee25925ff5f1d67936081e ]

The current implementation of splice() and tee() ignores O_NONBLOCK set
on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag for
blocking on pipe arguments. This is inconsistent since splice()-ing
from/to non-pipe file descriptors does take O_NONBLOCK into
consideration.

Fix this by promoting O_NONBLOCK, when set on a pipe, to
SPLICE_F_NONBLOCK.

Some context for how the current implementation of splice() leads to
inconsistent behavior. In the ongoing work[1] to add VM tracing
capability to trace-cmd we stream tracing data over named FIFOs or
vsockets from guests back to the host.

When we receive SIGINT from user to stop tracing, we set O_NONBLOCK on
the input file descriptor and set SPLICE_F_NONBLOCK for the next call to
splice(). If splice() was blocked waiting on data from the input FIFO,
after SIGINT splice() restarts with the same arguments (no
SPLICE_F_NONBLOCK) and blocks again instead of returning -EAGAIN when no
data is available.

This differs from the splice() behavior when reading from a vsocket or
when we're doing a traditional read()/write() loop (trace-cmd's
--nosplice argument).

With this patch applied we get the same behavior in all situations after
setting O_NONBLOCK which also matches the behavior of doing a
read()/write() loop instead of splice().

This change does have potential of breaking users who don't expect
EAGAIN from splice() when SPLICE_F_NONBLOCK is not set. OTOH programs
that set O_NONBLOCK and don't anticipate EAGAIN are arguably buggy[2].

[1] https://github.com/skaslev/trace-cmd/tree/vsock
[2] https://github.com/torvalds/linux/blob/d47e3da1759230e394096fd742aad423c291ba48/fs/read_write.c#L1425

Signed-off-by: Slavomir Kaslev <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/splice.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/fs/splice.c b/fs/splice.c
index 01983bea760c..3f9e7a724d85 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1137,6 +1137,9 @@ static long do_splice(struct file *in, loff_t __user *off_in,
if (ipipe == opipe)
return -EINVAL;

+ if ((in->f_flags | out->f_flags) & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
return splice_pipe_to_pipe(ipipe, opipe, len, flags);
}

@@ -1162,6 +1165,9 @@ static long do_splice(struct file *in, loff_t __user *off_in,
if (unlikely(ret < 0))
return ret;

+ if (in->f_flags & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
file_start_write(out);
ret = do_splice_from(ipipe, out, &offset, len, flags);
file_end_write(out);
@@ -1186,6 +1192,9 @@ static long do_splice(struct file *in, loff_t __user *off_in,
offset = in->f_pos;
}

+ if (out->f_flags & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
pipe_lock(opipe);
ret = wait_for_space(opipe, flags);
if (!ret)
@@ -1718,6 +1727,9 @@ static long do_tee(struct file *in, struct file *out, size_t len,
* copying the data.
*/
if (ipipe && opipe && ipipe != opipe) {
+ if ((in->f_flags | out->f_flags) & O_NONBLOCK)
+ flags |= SPLICE_F_NONBLOCK;
+
/*
* Keep going, unless we encounter an error. The ipipe/opipe
* ordering doesn't really matter.
--
2.19.1


2019-03-27 18:46:08

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 36/87] scsi: megaraid_sas: return error when create DMA pool failed

From: Jason Yan <[email protected]>

[ Upstream commit bcf3b67d16a4c8ffae0aa79de5853435e683945c ]

when create DMA pool for cmd frames failed, we should return -ENOMEM,
instead of 0.
In some case in:

megasas_init_adapter_fusion()

-->megasas_alloc_cmds()
-->megasas_create_frame_pool
create DMA pool failed,
--> megasas_free_cmds() [1]

-->megasas_alloc_cmds_fusion()
failed, then goto fail_alloc_cmds.
-->megasas_free_cmds() [2]

we will call megasas_free_cmds twice, [1] will kfree cmd_list,
[2] will use cmd_list.it will cause a problem:

Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd = ffffffc000f70000
[00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003,
*pmd=0000001fbf894003, *pte=006000006d000707
Internal error: Oops: 96000005 [#1] SMP
Modules linked in:
CPU: 18 PID: 1 Comm: swapper/0 Not tainted
task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000
PC is at megasas_free_cmds+0x30/0x70
LR is at megasas_free_cmds+0x24/0x70
...
Call trace:
[<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70
[<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8
[<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760
[<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8
[<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4
[<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c
[<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430
[<ffffffc00053a92c>] __driver_attach+0xa8/0xb0
[<ffffffc000538178>] bus_for_each_dev+0x74/0xc8
[<ffffffc000539e88>] driver_attach+0x28/0x34
[<ffffffc000539a18>] bus_add_driver+0x16c/0x248
[<ffffffc00053b234>] driver_register+0x6c/0x138
[<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c
[<ffffffc000ce3868>] megasas_init+0xc0/0x1a8
[<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec
[<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284
[<ffffffc0008d90b8>] kernel_init+0x1c/0xe4

Signed-off-by: Jason Yan <[email protected]>
Acked-by: Sumit Saxena <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 5de024a50e15..5b1c37e3913c 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3956,6 +3956,7 @@ int megasas_alloc_cmds(struct megasas_instance *instance)
if (megasas_create_frame_pool(instance)) {
dev_printk(KERN_DEBUG, &instance->pdev->dev, "Error creating frame DMA pool\n");
megasas_free_cmds(instance);
+ return -ENOMEM;
}

return 0;
--
2.19.1


2019-03-27 18:46:38

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 29/87] ARM: 8840/1: use a raw_spinlock_t in unwind

From: Sebastian Andrzej Siewior <[email protected]>

[ Upstream commit 74ffe79ae538283bbf7c155e62339f1e5c87b55a ]

Mostly unwind is done with irqs enabled however SLUB may call it with
irqs disabled while creating a new SLUB cache.

I had system freeze while loading a module which called
kmem_cache_create() on init. That means SLUB's __slab_alloc() disabled
interrupts and then

->new_slab_objects()
->new_slab()
->setup_object()
->setup_object_debug()
->init_tracking()
->set_track()
->save_stack_trace()
->save_stack_trace_tsk()
->walk_stackframe()
->unwind_frame()
->unwind_find_idx()
=>spin_lock_irqsave(&unwind_lock);

Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/kernel/unwind.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 0bee233fef9a..314cfb232a63 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -93,7 +93,7 @@ extern const struct unwind_idx __start_unwind_idx[];
static const struct unwind_idx *__origin_unwind_idx;
extern const struct unwind_idx __stop_unwind_idx[];

-static DEFINE_SPINLOCK(unwind_lock);
+static DEFINE_RAW_SPINLOCK(unwind_lock);
static LIST_HEAD(unwind_tables);

/* Convert a prel31 symbol to an absolute address */
@@ -201,7 +201,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr)
/* module unwind tables */
struct unwind_table *table;

- spin_lock_irqsave(&unwind_lock, flags);
+ raw_spin_lock_irqsave(&unwind_lock, flags);
list_for_each_entry(table, &unwind_tables, list) {
if (addr >= table->begin_addr &&
addr < table->end_addr) {
@@ -213,7 +213,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr)
break;
}
}
- spin_unlock_irqrestore(&unwind_lock, flags);
+ raw_spin_unlock_irqrestore(&unwind_lock, flags);
}

pr_debug("%s: idx = %p\n", __func__, idx);
@@ -529,9 +529,9 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
tab->begin_addr = text_addr;
tab->end_addr = text_addr + text_size;

- spin_lock_irqsave(&unwind_lock, flags);
+ raw_spin_lock_irqsave(&unwind_lock, flags);
list_add_tail(&tab->list, &unwind_tables);
- spin_unlock_irqrestore(&unwind_lock, flags);
+ raw_spin_unlock_irqrestore(&unwind_lock, flags);

return tab;
}
@@ -543,9 +543,9 @@ void unwind_table_del(struct unwind_table *tab)
if (!tab)
return;

- spin_lock_irqsave(&unwind_lock, flags);
+ raw_spin_lock_irqsave(&unwind_lock, flags);
list_del(&tab->list);
- spin_unlock_irqrestore(&unwind_lock, flags);
+ raw_spin_unlock_irqrestore(&unwind_lock, flags);

kfree(tab);
}
--
2.19.1


2019-03-27 18:46:40

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 30/87] iommu/io-pgtable-arm-v7s: Only kmemleak_ignore L2 tables

From: Nicolas Boichat <[email protected]>

[ Upstream commit 032ebd8548c9d05e8d2bdc7a7ec2fe29454b0ad0 ]

L1 tables are allocated with __get_dma_pages, and therefore already
ignored by kmemleak.

Without this, the kernel would print this error message on boot,
when the first L1 table is allocated:

[ 2.810533] kmemleak: Trying to color unknown object at 0xffffffd652388000 as Black
[ 2.818190] CPU: 5 PID: 39 Comm: kworker/5:0 Tainted: G S 4.19.16 #8
[ 2.831227] Workqueue: events deferred_probe_work_func
[ 2.836353] Call trace:
...
[ 2.852532] paint_ptr+0xa0/0xa8
[ 2.855750] kmemleak_ignore+0x38/0x6c
[ 2.859490] __arm_v7s_alloc_table+0x168/0x1f4
[ 2.863922] arm_v7s_alloc_pgtable+0x114/0x17c
[ 2.868354] alloc_io_pgtable_ops+0x3c/0x78
...

Fixes: e5fc9753b1a8314 ("iommu/io-pgtable: Add ARMv7 short descriptor support")
Signed-off-by: Nicolas Boichat <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/io-pgtable-arm-v7s.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/io-pgtable-arm-v7s.c b/drivers/iommu/io-pgtable-arm-v7s.c
index d68a552cfe8d..3085b47fac1d 100644
--- a/drivers/iommu/io-pgtable-arm-v7s.c
+++ b/drivers/iommu/io-pgtable-arm-v7s.c
@@ -207,7 +207,8 @@ static void *__arm_v7s_alloc_table(int lvl, gfp_t gfp,
if (dma != virt_to_phys(table))
goto out_unmap;
}
- kmemleak_ignore(table);
+ if (lvl == 2)
+ kmemleak_ignore(table);
return table;

out_unmap:
--
2.19.1


2019-03-27 18:46:44

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 15/87] f2fs: do not use mutex lock in atomic context

From: Sahitya Tummala <[email protected]>

[ Upstream commit 9083977dabf3833298ddcd40dee28687f1e6b483 ]

Fix below warning coming because of using mutex lock in atomic context.

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:98
in_atomic(): 1, irqs_disabled(): 0, pid: 585, name: sh
Preemption disabled at: __radix_tree_preload+0x28/0x130
Call trace:
dump_backtrace+0x0/0x2b4
show_stack+0x20/0x28
dump_stack+0xa8/0xe0
___might_sleep+0x144/0x194
__might_sleep+0x58/0x8c
mutex_lock+0x2c/0x48
f2fs_trace_pid+0x88/0x14c
f2fs_set_node_page_dirty+0xd0/0x184

Do not use f2fs_radix_tree_insert() to avoid doing cond_resched() with
spin_lock() acquired.

Signed-off-by: Sahitya Tummala <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/trace.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/trace.c b/fs/f2fs/trace.c
index 73b4e1d1912a..501c283761d2 100644
--- a/fs/f2fs/trace.c
+++ b/fs/f2fs/trace.c
@@ -61,6 +61,7 @@ void f2fs_trace_pid(struct page *page)

page->private = pid;

+retry:
if (radix_tree_preload(GFP_NOFS))
return;

@@ -71,7 +72,12 @@ void f2fs_trace_pid(struct page *page)
if (p)
radix_tree_delete(&pids, pid);

- f2fs_radix_tree_insert(&pids, pid, current);
+ if (radix_tree_insert(&pids, pid, current)) {
+ spin_unlock(&pids_lock);
+ radix_tree_preload_end();
+ cond_resched();
+ goto retry;
+ }

trace_printk("%3x:%3x %4x %-16s\n",
MAJOR(inode->i_sb->s_dev), MINOR(inode->i_sb->s_dev),
--
2.19.1


2019-03-27 18:46:51

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 13/87] mm/slab.c: kmemleak no scan alien caches

From: Qian Cai <[email protected]>

[ Upstream commit 92d1d07daad65c300c7d0b68bbef8867e9895d54 ]

Kmemleak throws endless warnings during boot due to in
__alloc_alien_cache(),

alc = kmalloc_node(memsize, gfp, node);
init_arraycache(&alc->ac, entries, batch);
kmemleak_no_scan(ac);

Kmemleak does not track the array cache (alc->ac) but the alien cache
(alc) instead, so let it track the latter by lifting kmemleak_no_scan()
out of init_arraycache().

There is another place that calls init_arraycache(), but
alloc_kmem_cache_cpus() uses the percpu allocation where will never be
considered as a leak.

kmemleak: Found object by alias at 0xffff8007b9aa7e38
CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2
Call trace:
dump_backtrace+0x0/0x168
show_stack+0x24/0x30
dump_stack+0x88/0xb0
lookup_object+0x84/0xac
find_and_get_object+0x84/0xe4
kmemleak_no_scan+0x74/0xf4
setup_kmem_cache_node+0x2b4/0x35c
__do_tune_cpucache+0x250/0x2d4
do_tune_cpucache+0x4c/0xe4
enable_cpucache+0xc8/0x110
setup_cpu_cache+0x40/0x1b8
__kmem_cache_create+0x240/0x358
create_cache+0xc0/0x198
kmem_cache_create_usercopy+0x158/0x20c
kmem_cache_create+0x50/0x64
fsnotify_init+0x58/0x6c
do_one_initcall+0x194/0x388
kernel_init_freeable+0x668/0x688
kernel_init+0x18/0x124
ret_from_fork+0x10/0x18
kmemleak: Object 0xffff8007b9aa7e00 (size 256):
kmemleak: comm "swapper/0", pid 1, jiffies 4294697137
kmemleak: min_count = 1
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace:
kmemleak_alloc+0x84/0xb8
kmem_cache_alloc_node_trace+0x31c/0x3a0
__kmalloc_node+0x58/0x78
setup_kmem_cache_node+0x26c/0x35c
__do_tune_cpucache+0x250/0x2d4
do_tune_cpucache+0x4c/0xe4
enable_cpucache+0xc8/0x110
setup_cpu_cache+0x40/0x1b8
__kmem_cache_create+0x240/0x358
create_cache+0xc0/0x198
kmem_cache_create_usercopy+0x158/0x20c
kmem_cache_create+0x50/0x64
fsnotify_init+0x58/0x6c
do_one_initcall+0x194/0x388
kernel_init_freeable+0x668/0x688
kernel_init+0x18/0x124
kmemleak: Not scanning unknown object at 0xffff8007b9aa7e38
CPU: 190 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2+ #2
Call trace:
dump_backtrace+0x0/0x168
show_stack+0x24/0x30
dump_stack+0x88/0xb0
kmemleak_no_scan+0x90/0xf4
setup_kmem_cache_node+0x2b4/0x35c
__do_tune_cpucache+0x250/0x2d4
do_tune_cpucache+0x4c/0xe4
enable_cpucache+0xc8/0x110
setup_cpu_cache+0x40/0x1b8
__kmem_cache_create+0x240/0x358
create_cache+0xc0/0x198
kmem_cache_create_usercopy+0x158/0x20c
kmem_cache_create+0x50/0x64
fsnotify_init+0x58/0x6c
do_one_initcall+0x194/0x388
kernel_init_freeable+0x668/0x688
kernel_init+0x18/0x124
ret_from_fork+0x10/0x18

Link: http://lkml.kernel.org/r/[email protected]
Fixes: 1fe00d50a9e8 ("slab: factor out initialization of array cache")
Signed-off-by: Qian Cai <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Catalin Marinas <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/slab.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/mm/slab.c b/mm/slab.c
index 354a09deecff..d2c0499c6b15 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -566,14 +566,6 @@ static void start_cpu_timer(int cpu)

static void init_arraycache(struct array_cache *ac, int limit, int batch)
{
- /*
- * The array_cache structures contain pointers to free object.
- * However, when such objects are allocated or transferred to another
- * cache the pointers are not cleared and they could be counted as
- * valid references during a kmemleak scan. Therefore, kmemleak must
- * not scan such objects.
- */
- kmemleak_no_scan(ac);
if (ac) {
ac->avail = 0;
ac->limit = limit;
@@ -589,6 +581,14 @@ static struct array_cache *alloc_arraycache(int node, int entries,
struct array_cache *ac = NULL;

ac = kmalloc_node(memsize, gfp, node);
+ /*
+ * The array_cache structures contain pointers to free object.
+ * However, when such objects are allocated or transferred to another
+ * cache the pointers are not cleared and they could be counted as
+ * valid references during a kmemleak scan. Therefore, kmemleak must
+ * not scan such objects.
+ */
+ kmemleak_no_scan(ac);
init_arraycache(ac, entries, batchcount);
return ac;
}
@@ -683,6 +683,7 @@ static struct alien_cache *__alloc_alien_cache(int node, int entries,

alc = kmalloc_node(memsize, gfp, node);
if (alc) {
+ kmemleak_no_scan(alc);
init_arraycache(&alc->ac, entries, batch);
spin_lock_init(&alc->lock);
}
--
2.19.1


2019-03-27 18:46:53

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 12/87] mm/vmalloc.c: fix kernel BUG at mm/vmalloc.c:512!

From: "Uladzislau Rezki (Sony)" <[email protected]>

[ Upstream commit afd07389d3f4933c7f7817a92fb5e053d59a3182 ]

One of the vmalloc stress test case triggers the kernel BUG():

<snip>
[60.562151] ------------[ cut here ]------------
[60.562154] kernel BUG at mm/vmalloc.c:512!
[60.562206] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[60.562247] CPU: 0 PID: 430 Comm: vmalloc_test/0 Not tainted 4.20.0+ #161
[60.562293] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[60.562351] RIP: 0010:alloc_vmap_area+0x36f/0x390
<snip>

it can happen due to big align request resulting in overflowing of
calculated address, i.e. it becomes 0 after ALIGN()'s fixup.

Fix it by checking if calculated address is within vstart/vend range.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Uladzislau Rezki (Sony) <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Oleksiy Avramchenko <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Thomas Garnier <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/vmalloc.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index e6aa073f01df..73afe460caf0 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -459,7 +459,11 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
}

found:
- if (addr + size > vend)
+ /*
+ * Check also calculated address against the vstart,
+ * because it can be 0 because of big align request.
+ */
+ if (addr + size > vend || addr < vstart)
goto overflow;

va->va_start = addr;
--
2.19.1


2019-03-27 18:46:55

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 14/87] ocfs2: fix a panic problem caused by o2cb_ctl

From: Jia Guo <[email protected]>

[ Upstream commit cc725ef3cb202ef2019a3c67c8913efa05c3cce6 ]

In the process of creating a node, it will cause NULL pointer
dereference in kernel if o2cb_ctl failed in the interval (mkdir,
o2cb_set_node_attribute(node_num)] in function o2cb_add_node.

The node num is initialized to 0 in function o2nm_node_group_make_item,
o2nm_node_group_drop_item will mistake the node number 0 for a valid
node number when we delete the node before the node number is set
correctly. If the local node number of the current host happens to be
0, cluster->cl_local_node will be set to O2NM_INVALID_NODE_NUM while
o2hb_thread still running. The panic stack is generated as follows:

o2hb_thread
\-o2hb_do_disk_heartbeat
\-o2hb_check_own_slot
|-slot = &reg->hr_slots[o2nm_this_node()];
//o2nm_this_node() return O2NM_INVALID_NODE_NUM

We need to check whether the node number is set when we delete the node.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jia Guo <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Acked-by: Jun Piao <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Changwei Ge <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/cluster/nodemanager.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c
index c204ac9b49e5..81a0d5d82757 100644
--- a/fs/ocfs2/cluster/nodemanager.c
+++ b/fs/ocfs2/cluster/nodemanager.c
@@ -621,13 +621,15 @@ static void o2nm_node_group_drop_item(struct config_group *group,
struct o2nm_node *node = to_o2nm_node(item);
struct o2nm_cluster *cluster = to_o2nm_cluster(group->cg_item.ci_parent);

- o2net_disconnect_node(node);
+ if (cluster->cl_nodes[node->nd_num] == node) {
+ o2net_disconnect_node(node);

- if (cluster->cl_has_local &&
- (cluster->cl_local_node == node->nd_num)) {
- cluster->cl_has_local = 0;
- cluster->cl_local_node = O2NM_INVALID_NODE_NUM;
- o2net_stop_listening(node);
+ if (cluster->cl_has_local &&
+ (cluster->cl_local_node == node->nd_num)) {
+ cluster->cl_has_local = 0;
+ cluster->cl_local_node = O2NM_INVALID_NODE_NUM;
+ o2net_stop_listening(node);
+ }
}

/* XXX call into net to stop this node from trading messages */
--
2.19.1


2019-03-27 18:47:15

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 21/87] jbd2: fix invalid descriptor block checksum

From: luojiajun <[email protected]>

[ Upstream commit 6e876c3dd205d30b0db6850e97a03d75457df007 ]

In jbd2_journal_commit_transaction(), if we are in abort mode,
we may flush the buffer without setting descriptor block checksum
by goto start_journal_io. Then fs is mounted,
jbd2_descriptor_block_csum_verify() failed.

[ 271.379811] EXT4-fs (vdd): shut down requested (2)
[ 271.381827] Aborting journal on device vdd-8.
[ 271.597136] JBD2: Invalid checksum recovering block 22199 in log
[ 271.598023] JBD2: recovery failed
[ 271.598484] EXT4-fs (vdd): error loading journal

Fix this problem by keep setting descriptor block checksum if the
descriptor buffer is not NULL.

This checksum problem can be reproduced by xfstests generic/388.

Signed-off-by: luojiajun <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/jbd2/commit.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 31f8ca046639..10ec27676191 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -700,9 +700,11 @@ void jbd2_journal_commit_transaction(journal_t *journal)
the last tag we set up. */

tag->t_flags |= cpu_to_be16(JBD2_FLAG_LAST_TAG);
-
- jbd2_descriptor_block_csum_set(journal, descriptor);
start_journal_io:
+ if (descriptor)
+ jbd2_descriptor_block_csum_set(journal,
+ descriptor);
+
for (i = 0; i < bufs; i++) {
struct buffer_head *bh = wbuf[i];
/*
--
2.19.1


2019-03-27 18:47:22

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 19/87] cifs: Fix NULL pointer dereference of devname

From: Yao Liu <[email protected]>

[ Upstream commit 68e2672f8fbd1e04982b8d2798dd318bf2515dd2 ]

There is a NULL pointer dereference of devname in strspn()

The oops looks something like:

CIFS: Attempting to mount (null)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:strspn+0x0/0x50
...
Call Trace:
? cifs_parse_mount_options+0x222/0x1710 [cifs]
? cifs_get_volume_info+0x2f/0x80 [cifs]
cifs_setup_volume_info+0x20/0x190 [cifs]
cifs_get_volume_info+0x50/0x80 [cifs]
cifs_smb3_do_mount+0x59/0x630 [cifs]
? ida_alloc_range+0x34b/0x3d0
cifs_do_mount+0x11/0x20 [cifs]
mount_fs+0x52/0x170
vfs_kern_mount+0x6b/0x170
do_mount+0x216/0xdc0
ksys_mount+0x83/0xd0
__x64_sys_mount+0x25/0x30
do_syscall_64+0x65/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this by adding a NULL check on devname in cifs_parse_devname()

Signed-off-by: Yao Liu <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/connect.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 33e65b71c49a..f291ed0c155d 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1201,6 +1201,11 @@ cifs_parse_devname(const char *devname, struct smb_vol *vol)
const char *delims = "/\\";
size_t len;

+ if (unlikely(!devname || !*devname)) {
+ cifs_dbg(VFS, "Device name not specified.\n");
+ return -EINVAL;
+ }
+
/* make sure we have a valid UNC double delimiter prefix */
len = strspn(devname, delims);
if (len != 2)
--
2.19.1


2019-03-27 18:47:26

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 02/87] h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux-

From: Masahiro Yamada <[email protected]>

[ Upstream commit fc2b47b55f17fd996f7a01975ce1c33c2f2513f6 ]

It believe it is a bad idea to hardcode a specific compiler prefix
that may or may not be installed on a user's system. It is annoying
when testing features that should not require compilers at all.

For example, mrproper, headers_install, etc. should work without
any compiler.

They look like follows on my machine.

$ make ARCH=h8300 mrproper
./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found
./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found
make: h8300-unknown-linux-gcc: Command not found
make: h8300-unknown-linux-gcc: Command not found
[ a bunch of the same error messages continue ]

$ make ARCH=h8300 headers_install
./scripts/gcc-version.sh: line 26: h8300-unknown-linux-gcc: command not found
./scripts/gcc-version.sh: line 27: h8300-unknown-linux-gcc: command not found
make: h8300-unknown-linux-gcc: Command not found
HOSTCC scripts/basic/fixdep
make: h8300-unknown-linux-gcc: Command not found
WRAP arch/h8300/include/generated/uapi/asm/kvm_para.h
[ snip ]

The solution is to delete this line, or to use cc-cross-prefix like
some architectures do. I chose the latter as a moderate fixup.

I added an alternative 'h8300-linux-' because it is available at:

https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/

Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/h8300/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
index e1c02ca230cb..073bba6f9f60 100644
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@@ -23,7 +23,7 @@ KBUILD_AFLAGS += $(aflags-y)
LDFLAGS += $(ldflags-y)

ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := h8300-unknown-linux-
+CROSS_COMPILE := $(call cc-cross-prefix, h8300-unknown-linux- h8300-linux-)
endif

core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
--
2.19.1


2019-03-27 18:47:29

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 16/87] fs/file.c: initialize init_files.resize_wait

From: Shuriyc Chu <[email protected]>

[ Upstream commit 5704a06810682683355624923547b41540e2801a ]

(Taken from https://bugzilla.kernel.org/show_bug.cgi?id=200647)

'get_unused_fd_flags' in kthread cause kernel crash. It works fine on
4.1, but causes crash after get 64 fds. It also cause crash on
ubuntu1404/1604/1804, centos7.5, and the crash messages are almost the
same.

The crash message on centos7.5 shows below:

start fd 61
start fd 62
start fd 63
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: __wake_up_common+0x2e/0x90
PGD 0
Oops: 0000 [#1] SMP
Modules linked in: test(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter devlink sunrpc kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd sg ppdev pcspkr virtio_balloon parport_pc parport i2c_piix4 joydev ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi virtio_scsi virtio_console virtio_net cirrus drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm crct10dif_pclmul crct10dif_common crc32c_intel drm ata_piix serio_raw libata virtio_pci virtio_ring i2c_core
virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CPU: 2 PID: 1820 Comm: test_fd Kdump: loaded Tainted: G OE ------------ 3.10.0-862.3.3.el7.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
task: ffff8e92b9431fa0 ti: ffff8e94247a0000 task.ti: ffff8e94247a0000
RIP: 0010:__wake_up_common+0x2e/0x90
RSP: 0018:ffff8e94247a2d18 EFLAGS: 00010086
RAX: 0000000000000000 RBX: ffffffff9d09daa0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffff9d09daa0
RBP: ffff8e94247a2d50 R08: 0000000000000000 R09: ffff8e92b95dfda8
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9d09daa8
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8e9434e80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000017c686000 CR4: 00000000000207e0
Call Trace:
__wake_up+0x39/0x50
expand_files+0x131/0x250
__alloc_fd+0x47/0x170
get_unused_fd_flags+0x30/0x40
test_fd+0x12a/0x1c0 [test]
kthread+0xd1/0xe0
ret_from_fork_nospec_begin+0x21/0x21
Code: 66 90 55 48 89 e5 41 57 41 89 f7 41 56 41 89 ce 41 55 41 54 49 89 fc 49 83 c4 08 53 48 83 ec 10 48 8b 47 08 89 55 cc 4c 89 45 d0 <48> 8b 08 49 39 c4 48 8d 78 e8 4c 8d 69 e8 75 08 eb 3b 4c 89 ef
RIP __wake_up_common+0x2e/0x90
RSP <ffff8e94247a2d18>
CR2: 0000000000000000

This issue exists since CentOS 7.5 3.10.0-862 and CentOS 7.4
(3.10.0-693.21.1 ) is ok. Root cause: the item 'resize_wait' is not
initialized before being used.

Reported-by: Richard Zhang <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/file.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/fs/file.c b/fs/file.c
index 69d6990e3021..09aac4d4729b 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -475,6 +475,7 @@ struct files_struct init_files = {
.full_fds_bits = init_files.full_fds_bits_init,
},
.file_lock = __SPIN_LOCK_UNLOCKED(init_files.file_lock),
+ .resize_wait = __WAIT_QUEUE_HEAD_INITIALIZER(init_files.resize_wait),
};

static unsigned int find_next_fd(struct fdtable *fdt, unsigned int start)
--
2.19.1


2019-03-27 18:47:32

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 18/87] dm thin: add sanity checks to thin-pool and external snapshot creation

From: "Jason Cai (Xiang Feng)" <[email protected]>

[ Upstream commit 70de2cbda8a5d788284469e755f8b097d339c240 ]

Invoking dm_get_device() twice on the same device path with different
modes is dangerous. Because in that case, upgrade_mode() will alloc a
new 'dm_dev' and free the old one, which may be referenced by a previous
caller. Dereferencing the dangling pointer will trigger kernel NULL
pointer dereference.

The following two cases can reproduce this issue. Actually, they are
invalid setups that must be disallowed, e.g.:

1. Creating a thin-pool with read_only mode, and the same device as
both metadata and data.

dmsetup create thinp --table \
"0 41943040 thin-pool /dev/vdb /dev/vdb 128 0 1 read_only"

BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
...
Call Trace:
new_read+0xfb/0x110 [dm_bufio]
dm_bm_read_lock+0x43/0x190 [dm_persistent_data]
? kmem_cache_alloc_trace+0x15c/0x1e0
__create_persistent_data_objects+0x65/0x3e0 [dm_thin_pool]
dm_pool_metadata_open+0x8c/0xf0 [dm_thin_pool]
pool_ctr.cold.79+0x213/0x913 [dm_thin_pool]
? realloc_argv+0x50/0x70 [dm_mod]
dm_table_add_target+0x14e/0x330 [dm_mod]
table_load+0x122/0x2e0 [dm_mod]
? dev_status+0x40/0x40 [dm_mod]
ctl_ioctl+0x1aa/0x3e0 [dm_mod]
dm_ctl_ioctl+0xa/0x10 [dm_mod]
do_vfs_ioctl+0xa2/0x600
? handle_mm_fault+0xda/0x200
? __do_page_fault+0x26c/0x4f0
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9

2. Creating a external snapshot using the same thin-pool device.

dmsetup create thinp --table \
"0 41943040 thin-pool /dev/vdc /dev/vdb 128 0 2 ignore_discard"
dmsetup message /dev/mapper/thinp 0 "create_thin 0"
dmsetup create snap --table \
"0 204800 thin /dev/mapper/thinp 0 /dev/mapper/thinp"

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
Call Trace:
? __alloc_pages_nodemask+0x13c/0x2e0
retrieve_status+0xa5/0x1f0 [dm_mod]
? dm_get_live_or_inactive_table.isra.7+0x20/0x20 [dm_mod]
table_status+0x61/0xa0 [dm_mod]
ctl_ioctl+0x1aa/0x3e0 [dm_mod]
dm_ctl_ioctl+0xa/0x10 [dm_mod]
do_vfs_ioctl+0xa2/0x600
ksys_ioctl+0x60/0x90
? ksys_write+0x4f/0xb0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x55/0x150
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Jason Cai (Xiang Feng) <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/md/dm-thin.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index 345f4d81ba07..23a7e108352a 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -3295,6 +3295,13 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv)
as.argc = argc;
as.argv = argv;

+ /* make sure metadata and data are different devices */
+ if (!strcmp(argv[0], argv[1])) {
+ ti->error = "Error setting metadata or data device";
+ r = -EINVAL;
+ goto out_unlock;
+ }
+
/*
* Set default pool features.
*/
@@ -4177,6 +4184,12 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv)
tc->sort_bio_list = RB_ROOT;

if (argc == 3) {
+ if (!strcmp(argv[0], argv[2])) {
+ ti->error = "Error setting origin device";
+ r = -EINVAL;
+ goto bad_origin_dev;
+ }
+
r = dm_get_device(ti, argv[2], FMODE_READ, &origin_dev);
if (r) {
ti->error = "Error opening origin device";
--
2.19.1


2019-03-27 18:47:47

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 17/87] cifs: use correct format characters

From: Louis Taylor <[email protected]>

[ Upstream commit 259594bea574e515a148171b5cd84ce5cbdc028a ]

When compiling with -Wformat, clang emits the following warnings:

fs/cifs/smb1ops.c:312:20: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
tgt_total_cnt, total_in_tgt);
^~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:289:4: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->flags, ref->server_type);
^~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:289:16: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->flags, ref->server_type);
^~~~~~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:291:4: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->ref_flag, ref->path_consumed);
^~~~~~~~~~~~~

fs/cifs/cifs_dfs_ref.c:291:19: warning: format specifies type 'short'
but the argument has type 'int' [-Wformat]
ref->ref_flag, ref->path_consumed);
^~~~~~~~~~~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for ints and unsigned
ints.

Link: https://github.com/ClangBuiltLinux/linux/issues/378

Signed-off-by: Louis Taylor <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/cifs_dfs_ref.c | 4 ++--
fs/cifs/smb1ops.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 9156be545b0f..4660208132a2 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -271,9 +271,9 @@ static void dump_referral(const struct dfs_info3_param *ref)
{
cifs_dbg(FYI, "DFS: ref path: %s\n", ref->path_name);
cifs_dbg(FYI, "DFS: node path: %s\n", ref->node_name);
- cifs_dbg(FYI, "DFS: fl: %hd, srv_type: %hd\n",
+ cifs_dbg(FYI, "DFS: fl: %d, srv_type: %d\n",
ref->flags, ref->server_type);
- cifs_dbg(FYI, "DFS: ref_flags: %hd, path_consumed: %hd\n",
+ cifs_dbg(FYI, "DFS: ref_flags: %d, path_consumed: %d\n",
ref->ref_flag, ref->path_consumed);
}

diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c
index efd72e1fae74..f7a9adab0b84 100644
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -305,7 +305,7 @@ coalesce_t2(char *second_buf, struct smb_hdr *target_hdr)
remaining = tgt_total_cnt - total_in_tgt;

if (remaining < 0) {
- cifs_dbg(FYI, "Server sent too much data. tgt_total_cnt=%hu total_in_tgt=%hu\n",
+ cifs_dbg(FYI, "Server sent too much data. tgt_total_cnt=%hu total_in_tgt=%u\n",
tgt_total_cnt, total_in_tgt);
return -EPROTO;
}
--
2.19.1


2019-03-27 18:48:20

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 10/87] mm/cma.c: cma_declare_contiguous: correct err handling

From: Peng Fan <[email protected]>

[ Upstream commit 0d3bd18a5efd66097ef58622b898d3139790aa9d ]

In case cma_init_reserved_mem failed, need to free the memblock
allocated by memblock_reserve or memblock_alloc_range.

Quote Catalin's comments:
https://lkml.org/lkml/2019/2/26/482

Kmemleak is supposed to work with the memblock_{alloc,free} pair and it
ignores the memblock_reserve() as a memblock_alloc() implementation
detail. It is, however, tolerant to memblock_free() being called on
a sub-range or just a different range from a previous memblock_alloc().
So the original patch looks fine to me. FWIW:

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Peng Fan <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
Cc: Laura Abbott <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/cma.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/mm/cma.c b/mm/cma.c
index 397687fc51f9..b5d8847497a3 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -339,12 +339,14 @@ int __init cma_declare_contiguous(phys_addr_t base,

ret = cma_init_reserved_mem(base, size, order_per_bit, res_cma);
if (ret)
- goto err;
+ goto free_mem;

pr_info("Reserved %ld MiB at %pa\n", (unsigned long)size / SZ_1M,
&base);
return 0;

+free_mem:
+ memblock_free(base, size);
err:
pr_err("Failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M);
return ret;
--
2.19.1


2019-03-27 19:54:12

by Sasha Levin

[permalink] [raw]
Subject: [PATCH AUTOSEL 4.9 86/87] drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers

From: Ville Syrjälä <[email protected]>

[ Upstream commit c978ae9bde582e82a04c63a4071701691dd8b35c ]

We aren't supposed to force a stop+start between every i2c msg
when performing multi message transfers. This should eg. cause
the DDC segment address to be reset back to 0 between writing
the segment address and reading the actual EDID extension block.

To quote the E-DDC spec:
"... this standard requires that the segment pointer be
reset to 00h when a NO ACK or a STOP condition is received."

Since we're going to touch this might as well consult the
I2C_M_STOP flag to determine whether we want to force the stop
or not.

Cc: Brian Vincent <[email protected]>
References: https://bugs.freedesktop.org/show_bug.cgi?id=108081
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Dhinakaran Pandiyan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index b59441d109a5..4a959740058e 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -3069,6 +3069,7 @@ static int drm_dp_mst_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs
msg.u.i2c_read.transactions[i].i2c_dev_id = msgs[i].addr;
msg.u.i2c_read.transactions[i].num_bytes = msgs[i].len;
msg.u.i2c_read.transactions[i].bytes = msgs[i].buf;
+ msg.u.i2c_read.transactions[i].no_stop_bit = !(msgs[i].flags & I2C_M_STOP);
}
msg.u.i2c_read.read_i2c_device_id = msgs[num - 1].addr;
msg.u.i2c_read.num_bytes_read = msgs[num - 1].len;
--
2.19.1


2019-03-28 15:38:50

by Slavomir Kaslev

[permalink] [raw]
Subject: Re: [PATCH AUTOSEL 4.9 20/87] fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes

On Wed, 2019-03-27 at 14:19 -0400, Sasha Levin wrote:
> From: Slavomir Kaslev <[email protected]>
>
> [ Upstream commit ee5e001196d1345b8fee25925ff5f1d67936081e ]
>
> The current implementation of splice() and tee() ignores O_NONBLOCK
> set
> on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag
> for
> blocking on pipe arguments. This is inconsistent since splice()-ing
> from/to non-pipe file descriptors does take O_NONBLOCK into
> consideration.
>
> Fix this by promoting O_NONBLOCK, when set on a pipe, to
> SPLICE_F_NONBLOCK.

Hey Sasha,

I don't think that this patch should be merged to stable kernels. It's
more of a feature rather than a bug/regression fix and it changes how
splice() has been working from day one.

Can you please drop it from the stable queues?

Thanks,

-- Slavi

2019-03-28 16:05:17

by Steven Rostedt

[permalink] [raw]
Subject: Re: [PATCH AUTOSEL 4.9 20/87] fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes

On Thu, 28 Mar 2019 15:37:49 +0000
Slavomir Kaslev <[email protected]> wrote:

> On Wed, 2019-03-27 at 14:19 -0400, Sasha Levin wrote:
> > From: Slavomir Kaslev <[email protected]>
> >
> > [ Upstream commit ee5e001196d1345b8fee25925ff5f1d67936081e ]
> >
> > The current implementation of splice() and tee() ignores O_NONBLOCK
> > set
> > on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag
> > for
> > blocking on pipe arguments. This is inconsistent since splice()-ing
> > from/to non-pipe file descriptors does take O_NONBLOCK into
> > consideration.
> >
> > Fix this by promoting O_NONBLOCK, when set on a pipe, to
> > SPLICE_F_NONBLOCK.
>
> Hey Sasha,
>
> I don't think that this patch should be merged to stable kernels. It's
> more of a feature rather than a bug/regression fix and it changes how
> splice() has been working from day one.
>
> Can you please drop it from the stable queues?
>

On the other hand, it keeps stable more in sync with what mainline has.
If someone writes new code against a stable release, and depends on
this behavior, it's less likely to break when they run it on a newer
kernel. Which means its less likely that Linus will revert your
change ;-)

-- Steve

2019-04-03 16:20:09

by Sasha Levin

[permalink] [raw]
Subject: Re: [PATCH AUTOSEL 4.9 20/87] fs: Make splice() and tee() take into account O_NONBLOCK flag on pipes

On Thu, Mar 28, 2019 at 12:04:17PM -0400, Steven Rostedt wrote:
>On Thu, 28 Mar 2019 15:37:49 +0000
>Slavomir Kaslev <[email protected]> wrote:
>
>> On Wed, 2019-03-27 at 14:19 -0400, Sasha Levin wrote:
>> > From: Slavomir Kaslev <[email protected]>
>> >
>> > [ Upstream commit ee5e001196d1345b8fee25925ff5f1d67936081e ]
>> >
>> > The current implementation of splice() and tee() ignores O_NONBLOCK
>> > set
>> > on pipe file descriptors and checks only the SPLICE_F_NONBLOCK flag
>> > for
>> > blocking on pipe arguments. This is inconsistent since splice()-ing
>> > from/to non-pipe file descriptors does take O_NONBLOCK into
>> > consideration.
>> >
>> > Fix this by promoting O_NONBLOCK, when set on a pipe, to
>> > SPLICE_F_NONBLOCK.
>>
>> Hey Sasha,
>>
>> I don't think that this patch should be merged to stable kernels. It's
>> more of a feature rather than a bug/regression fix and it changes how
>> splice() has been working from day one.
>>
>> Can you please drop it from the stable queues?
>>
>
>On the other hand, it keeps stable more in sync with what mainline has.
>If someone writes new code against a stable release, and depends on
>this behavior, it's less likely to break when they run it on a newer
>kernel. Which means its less likely that Linus will revert your
>change ;-)

I'm going to drop this, I don't really want to take things which
knowingly might brake userspace.

--
Thanks,
Sasha