This patch series adds support for the Ethernet MAC found on the Actions
Semi Owl family of SoCs.
For the moment I have only tested the driver on RoseapplePi SBC, which is
based on the S500 SoC variant. It might work on S900 as well, but I cannot
tell for sure since the S900 datasheet I currently have doesn't provide
any information regarding the MAC registers - so I couldn't check the
compatibility with S500.
Similar story for S700: the datasheet I own is incomplete, but it seems
the MAC is advertised with Gigabit capabilities. For that reason most
probably we need to extend the current implementation in order to support
this SoC variant as well.
Please note that for testing the driver it is also necessary to update the
S500 clock subsystem:
https://lore.kernel.org/lkml/[email protected]/
The DTS changes for the S500 SBCs will be provided separately.
Thanks,
Cristi
Changes in v3:
- Dropped the 'debug' module parameter and passed the default NETIF_MSG flags
to netif_msg_init(), according to David's review
- Removed the owl_emac_generate_mac_addr() function and the related
OWL_EMAC_GEN_ADDR_SYS_SN config option until a portable solution to get
the system serial number is found - when building on arm64 the following
error is thrown (as reported by Rob's kernel bot):
'[...]/owl-emac.c:9:10: fatal error: asm/system_info.h: No such file or directory'
- Rebased patchset on v5.12-rc4
Changes in v2:
* According to Philipp's review
- Requested exclusive control over serial line via
devm_reset_control_get_exclusive()
- Optimized error handling by using dev_err_probe()
* According to Andrew's review
- Dropped the inline keywords
- Applied Reverse Christmas Tree format to local variable declarations
- Renamed owl_emac_phy_config() to owl_emac_update_link_state()
- Documented the purpose of the special descriptor used in the context of
owl_emac_setup_frame_xmit()
- Updated comment inside owl_emac_mdio_clock_enable() regarding the MDC
clock divider setup
- Indicated MAC support for symmetric pause via phy_set_sym_pause()
in owl_emac_phy_init()
- Changed the MAC addr generation algorithm in owl_emac_generate_mac_addr()
by setting the locally administered bit in byte 0 and replacing bytes 1 & 2
with additional entries from enc_sn
- Moved devm_add_action_or_reset() before clk_set_rate() in owl_emac_probe()
* Other
- Added SMII interface support: updated owl_emac_core_sw_reset(), added
owl_emac_clk_set_rate(), updated description in the YAML binding
- Changed OWL_EMAC_TX_TIMEOUT from 0.05*HZ to 2*HZ
- Rebased patchset on v5.12-rc3
Cristian Ciocaltea (3):
dt-bindings: net: Add Actions Semi Owl Ethernet MAC binding
net: ethernet: actions: Add Actions Semi Owl Ethernet MAC driver
MAINTAINERS: Add entries for Actions Semi Owl Ethernet MAC
.../bindings/net/actions,owl-emac.yaml | 92 +
MAINTAINERS | 2 +
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/actions/Kconfig | 26 +
drivers/net/ethernet/actions/Makefile | 6 +
drivers/net/ethernet/actions/owl-emac.c | 1625 +++++++++++++++++
drivers/net/ethernet/actions/owl-emac.h | 280 +++
8 files changed, 2033 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/actions,owl-emac.yaml
create mode 100644 drivers/net/ethernet/actions/Kconfig
create mode 100644 drivers/net/ethernet/actions/Makefile
create mode 100644 drivers/net/ethernet/actions/owl-emac.c
create mode 100644 drivers/net/ethernet/actions/owl-emac.h
--
2.31.0
Add entries for Actions Semi Owl Ethernet MAC binding and driver.
Signed-off-by: Cristian Ciocaltea <[email protected]>
---
MAINTAINERS | 2 ++
1 file changed, 2 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 14d1ef97c339..f9d147e27fb0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1530,6 +1530,7 @@ F: Documentation/devicetree/bindings/dma/owl-dma.yaml
F: Documentation/devicetree/bindings/i2c/i2c-owl.yaml
F: Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
F: Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+F: Documentation/devicetree/bindings/net/actions,owl-emac.yaml
F: Documentation/devicetree/bindings/pinctrl/actions,*
F: Documentation/devicetree/bindings/power/actions,owl-sps.txt
F: Documentation/devicetree/bindings/timer/actions,owl-timer.txt
@@ -1542,6 +1543,7 @@ F: drivers/dma/owl-dma.c
F: drivers/i2c/busses/i2c-owl.c
F: drivers/irqchip/irq-owl-sirq.c
F: drivers/mmc/host/owl-mmc.c
+F: drivers/net/ethernet/actions/
F: drivers/pinctrl/actions/*
F: drivers/soc/actions/
F: include/dt-bindings/power/owl-*
--
2.31.0
Hello:
This series was applied to netdev/net-next.git (refs/heads/master):
On Mon, 22 Mar 2021 01:29:42 +0200 you wrote:
> This patch series adds support for the Ethernet MAC found on the Actions
> Semi Owl family of SoCs.
>
> For the moment I have only tested the driver on RoseapplePi SBC, which is
> based on the S500 SoC variant. It might work on S900 as well, but I cannot
> tell for sure since the S900 datasheet I currently have doesn't provide
> any information regarding the MAC registers - so I couldn't check the
> compatibility with S500.
>
> [...]
Here is the summary with links:
- [v3,1/3] dt-bindings: net: Add Actions Semi Owl Ethernet MAC binding
https://git.kernel.org/netdev/net-next/c/fd42327f31bb
- [v3,2/3] net: ethernet: actions: Add Actions Semi Owl Ethernet MAC driver
https://git.kernel.org/netdev/net-next/c/de6e0b198239
- [v3,3/3] MAINTAINERS: Add entries for Actions Semi Owl Ethernet MAC
https://git.kernel.org/netdev/net-next/c/b31f51832acf
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html