On 4/21/2022 10:43 PM, Matthias Kaehlcke wrote:
Thanks for your time Matthias!!!
> On Thu, Apr 21, 2022 at 08:17:36PM +0530, Srinivasa Rao Mandadapu wrote:
>
>> Subject: arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0 and CRD 2.0
> nit: and the IDP boards?
Okay.
>
>> Enable lpass cpu node for audio on sc7280 based platforms of revision 3
>> and 4 (aka CRD 1.0 and 2.0) boards.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
>> Co-developed-by: Venkata Prasad Potturu <[email protected]>
>> Signed-off-by: Venkata Prasad Potturu <[email protected]>
>> Reviewed-by: Matthias Kaehlcke <[email protected]>
>> Reviewed-by: Stephen Boyd <[email protected]>
>> ---
>> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 28 ++++++++++++++++++++++++++++
>> 1 file changed, 28 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> index 24196a1..2e991e8 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> @@ -274,6 +274,34 @@
>> modem-init;
>> };
>>
>> +&lpass_cpu {
>> + status = "okay";
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
>> +
>> + dai-link@1 {
>> + reg = <MI2S_SECONDARY>;
>> + qcom,playback-sd-lines = <0>;
>> + };
>> +
>> + dai-link@5 {
>> + reg = <LPASS_DP_RX>;
>> + };
>> +
>> + dai-link@6 {
>> + reg = <LPASS_CDC_DMA_RX0>;
>> + };
>> +
>> + dai-link@19 {
>> + reg = <LPASS_CDC_DMA_TX3>;
>> + };
>> +
>> + dai-link@25 {
>> + reg = <LPASS_CDC_DMA_VA_TX0>;
>> + };
>> +};
>> +
>> &lpass_rx_macro {
>> status = "okay";
>> };
>> --
>> 2.7.4
>>