2020-09-11 16:32:39

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 5.4 0/8] 5.4.65-rc1 review

This is the start of the stable review cycle for the 5.4.65 release.
There are 8 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 13 Sep 2020 12:54:10 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.65-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>
Linux 5.4.65-rc1

Jakub Kicinski <[email protected]>
net: disable netpoll on fresh napis

Tetsuo Handa <[email protected]>
tipc: fix shutdown() of connectionless socket

Vinicius Costa Gomes <[email protected]>
taprio: Fix using wrong queues in gate mask

Xin Long <[email protected]>
sctp: not disable bh in the whole sctp_get_port_local()

Kamil Lorenc <[email protected]>
net: usb: dm9601: Add USB ID of Keenetic Plus DSL

Paul Moore <[email protected]>
netlabel: fix problems with mapping removal

Ido Schimmel <[email protected]>
ipv6: Fix sysctl max for fib_multipath_hash_policy

Ido Schimmel <[email protected]>
ipv4: Silence suspicious RCU usage warning


-------------

Diffstat:

Makefile | 4 +--
drivers/net/usb/dm9601.c | 4 +++
net/core/dev.c | 3 +-
net/core/netpoll.c | 2 +-
net/ipv4/fib_trie.c | 3 +-
net/ipv6/sysctl_net_ipv6.c | 3 +-
net/netlabel/netlabel_domainhash.c | 59 +++++++++++++++++++-------------------
net/sched/sch_taprio.c | 30 +++++++++++++++----
net/sctp/socket.c | 16 ++++-------
net/tipc/socket.c | 9 ++++--
10 files changed, 79 insertions(+), 54 deletions(-)



2020-09-11 16:33:14

by Greg Kroah-Hartman

[permalink] [raw]
Subject: [PATCH 5.4 2/8] ipv6: Fix sysctl max for fib_multipath_hash_policy

From: Ido Schimmel <[email protected]>

[ Upstream commit 05d4487197b2b71d5363623c28924fd58c71c0b6 ]

Cited commit added the possible value of '2', but it cannot be set. Fix
it by adjusting the maximum value to '2'. This is consistent with the
corresponding IPv4 sysctl.

Before:

# sysctl -w net.ipv6.fib_multipath_hash_policy=2
sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 0

After:

# sysctl -w net.ipv6.fib_multipath_hash_policy=2
net.ipv6.fib_multipath_hash_policy = 2
# sysctl net.ipv6.fib_multipath_hash_policy
net.ipv6.fib_multipath_hash_policy = 2

Fixes: d8f74f0975d8 ("ipv6: Support multipath hashing on inner IP pkts")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Stephen Suryaputra <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/sysctl_net_ipv6.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -21,6 +21,7 @@
#include <net/calipso.h>
#endif

+static int two = 2;
static int flowlabel_reflect_max = 0x7;
static int auto_flowlabels_min;
static int auto_flowlabels_max = IP6_AUTO_FLOW_LABEL_MAX;
@@ -151,7 +152,7 @@ static struct ctl_table ipv6_table_templ
.mode = 0644,
.proc_handler = proc_rt6_multipath_hash_policy,
.extra1 = SYSCTL_ZERO,
- .extra2 = SYSCTL_ONE,
+ .extra2 = &two,
},
{
.procname = "seg6_flowlabel",


2020-09-11 22:23:02

by Shuah Khan

[permalink] [raw]
Subject: Re: [PATCH 5.4 0/8] 5.4.65-rc1 review

On 9/11/20 6:54 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.65 release.
> There are 8 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 13 Sep 2020 12:54:10 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.65-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <[email protected]>

thanks,
-- Shuah

2020-09-12 07:33:44

by Naresh Kamboju

[permalink] [raw]
Subject: Re: [PATCH 5.4 0/8] 5.4.65-rc1 review

On Fri, 11 Sep 2020 at 18:30, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.4.65 release.
> There are 8 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 13 Sep 2020 12:54:10 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.65-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <[email protected]>

Summary
------------------------------------------------------------------------

kernel: 5.4.65-rc1
git repo: ['https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git',
'https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc']
git branch: linux-5.4.y
git commit: cdcf7cd54ebd34795a39be0bf517dd1017873640
git describe: v5.4.64-9-gcdcf7cd54ebd
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.64-9-gcdcf7cd54ebd


No regressions (compared to build v5.4.64)


No fixes (compared to build v5.4.64)

Ran 19759 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* linux-log-parser
* perf
* network-basic-tests
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* v4l2-compliance
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* ssuite

--
Linaro LKFT
https://lkft.linaro.org