This is the start of the stable review cycle for the 4.4.117 release.
There are 33 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri Feb 23 12:43:54 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.117-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.117-rc1
Arnd Bergmann <[email protected]>
media: r820t: fix r820t_write_reg for KASAN
Arnd Bergmann <[email protected]>
ARM: dts: s5pv210: add interrupt-parent for ohci
Arnd Bergmann <[email protected]>
ARM: pxa/tosa-bt: add MODULE_LICENSE tag
Linus Torvalds <[email protected]>
vfs: don't do RCU lookup of empty pathnames
Arnd Bergmann <[email protected]>
x86: fix build warnign with 32-bit PAE
NeilBrown <[email protected]>
dm: correctly handle chained bios in dec_pending()
Mikulas Patocka <[email protected]>
mvpp2: fix multicast address filter
Takashi Iwai <[email protected]>
ALSA: seq: Fix racy pool initializations
Lassi Ylikojola <[email protected]>
ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204
Jan-Marek Glogowski <[email protected]>
ALSA: hda/realtek: PCI quirk for Fujitsu U7x7
Kirill Marinushkin <[email protected]>
ALSA: usb-audio: Fix UAC2 get_ctl request with a RANGE attribute
Hui Wang <[email protected]>
ALSA: hda - Fix headset mic detection problem for two Dell machines
Liu Bo <[email protected]>
Btrfs: fix unexpected -EEXIST when creating new inode
Liu Bo <[email protected]>
Btrfs: fix crash due to not cleaning up tree log block's dirty bits
Liu Bo <[email protected]>
Btrfs: fix deadlock in run_delalloc_nocow
Larry Finger <[email protected]>
rtlwifi: rtl8821ae: Fix connection lost problem correctly
Nicolas Pitre <[email protected]>
console/dummy: leave .con_font_get set to NULL
Johan Hovold <[email protected]>
video: fbdev: atmel_lcdfb: fix display-timings lookup
Arnd Bergmann <[email protected]>
mm: hide a #warning for COMPILE_TEST
Ernesto A. Fernández <[email protected]>
ext4: correct documentation for grpid mount option
Zhouyi Zhou <[email protected]>
ext4: save error to disk in __ext4_grp_locked_error()
Stewart Smith <[email protected]>
rtc-opal: Fix handling of firmware error codes, prevent busy loops
Julia Lawall <[email protected]>
drm/radeon: adjust tested variable
Gustavo A. R. Silva <[email protected]>
x86/cpu: Change type of x86_cache_size variable to unsigned int
David Woodhouse <[email protected]>
KVM/x86: Reduce retpoline performance impact in slot_handle_level_range(), by always inlining iterator helper methods
Takashi Iwai <[email protected]>
ALSA: seq: Fix regression by incorrect ioctl_mutex usages
Viresh Kumar <[email protected]>
arm: spear13xx: Fix spics gpio controller's warning
Viresh Kumar <[email protected]>
arm: spear13xx: Fix dmas cells
Viresh Kumar <[email protected]>
arm: spear600: Add missing interrupt-parent of rtc
Patrice Chotard <[email protected]>
ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
Eugene Syromiatnikov <[email protected]>
s390: fix handling of -1 in set{,fs}[gu]id16 syscalls
Bjorn Andersson <[email protected]>
PM / devfreq: Propagate error from devfreq_add_device()
Jack Morgenstein <[email protected]>
IB/mlx4: Fix incorrectly releasing steerable UD QPs when have only ETH ports
-------------
Diffstat:
Documentation/devicetree/bindings/dma/snps-dma.txt | 2 +-
Documentation/filesystems/ext4.txt | 2 +-
Makefile | 4 ++--
arch/arm/boot/dts/s5pv210.dtsi | 1 +
arch/arm/boot/dts/spear1310-evb.dts | 2 +-
arch/arm/boot/dts/spear1340.dtsi | 4 ++--
arch/arm/boot/dts/spear13xx.dtsi | 6 ++---
arch/arm/boot/dts/spear600.dtsi | 1 +
arch/arm/boot/dts/stih407.dtsi | 3 ++-
arch/arm/boot/dts/stih410.dtsi | 3 ++-
arch/arm/mach-pxa/tosa-bt.c | 4 ++++
arch/s390/kernel/compat_linux.c | 8 +++----
arch/x86/include/asm/processor.h | 2 +-
arch/x86/kernel/cpu/common.c | 2 +-
arch/x86/kernel/cpu/microcode/intel.c | 2 +-
arch/x86/kernel/cpu/proc.c | 4 ++--
arch/x86/kvm/mmu.c | 10 ++++----
drivers/devfreq/devfreq.c | 2 +-
drivers/gpu/drm/radeon/radeon_uvd.c | 2 +-
drivers/infiniband/hw/mlx4/main.c | 13 ++++------
drivers/md/dm.c | 3 ++-
drivers/media/tuners/r820t.c | 13 ++++++----
drivers/net/ethernet/marvell/mvpp2.c | 11 ++++++---
drivers/net/ethernet/mellanox/mlx4/qp.c | 3 +++
.../net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 5 ++--
drivers/net/wireless/realtek/rtlwifi/wifi.h | 1 +
drivers/rtc/rtc-opal.c | 12 ++++++++--
drivers/video/console/dummycon.c | 1 -
drivers/video/fbdev/atmel_lcdfb.c | 8 ++++++-
fs/btrfs/inode.c | 5 +++-
fs/btrfs/tree-log.c | 27 +++++++++++++++++++++
fs/ext4/super.c | 1 +
fs/namei.c | 3 +++
include/linux/kaiser.h | 2 +-
mm/memory.c | 2 +-
sound/core/seq/seq_clientmgr.c | 23 ++++++++++--------
sound/pci/hda/patch_realtek.c | 28 ++++++++++++++++++++++
sound/usb/mixer.c | 18 ++++++++------
sound/usb/pcm.c | 9 +++++++
39 files changed, 181 insertions(+), 71 deletions(-)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kirill Marinushkin <[email protected]>
commit 447cae58cecd69392b74a4a42cd0ab9cabd816af upstream.
The layout of the UAC2 Control request and response varies depending on
the request type. With the current implementation, only the Layout 2
Parameter Block (with the 2-byte sized RANGE attribute) is handled
properly. For the Control requests with the 1-byte sized RANGE attribute
(Bass Control, Mid Control, Tremble Control), the response is parsed
incorrectly.
This commit:
* fixes the wLength field value in the request
* fixes parsing the range values from the response
Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Signed-off-by: Kirill Marinushkin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/mixer.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -343,17 +343,20 @@ static int get_ctl_value_v2(struct usb_m
int validx, int *value_ret)
{
struct snd_usb_audio *chip = cval->head.mixer->chip;
- unsigned char buf[4 + 3 * sizeof(__u32)]; /* enough space for one range */
+ /* enough space for one range */
+ unsigned char buf[sizeof(__u16) + 3 * sizeof(__u32)];
unsigned char *val;
- int idx = 0, ret, size;
+ int idx = 0, ret, val_size, size;
__u8 bRequest;
+ val_size = uac2_ctl_value_size(cval->val_type);
+
if (request == UAC_GET_CUR) {
bRequest = UAC2_CS_CUR;
- size = uac2_ctl_value_size(cval->val_type);
+ size = val_size;
} else {
bRequest = UAC2_CS_RANGE;
- size = sizeof(buf);
+ size = sizeof(__u16) + 3 * val_size;
}
memset(buf, 0, sizeof(buf));
@@ -386,16 +389,17 @@ error:
val = buf + sizeof(__u16);
break;
case UAC_GET_MAX:
- val = buf + sizeof(__u16) * 2;
+ val = buf + sizeof(__u16) + val_size;
break;
case UAC_GET_RES:
- val = buf + sizeof(__u16) * 3;
+ val = buf + sizeof(__u16) + val_size * 2;
break;
default:
return -EINVAL;
}
- *value_ret = convert_signed_value(cval, snd_usb_combine_bytes(val, sizeof(__u16)));
+ *value_ret = convert_signed_value(cval,
+ snd_usb_combine_bytes(val, val_size));
return 0;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
This is the revised backport of the upstream commit
b3defb791b26ea0683a93a4f49c77ec45ec96f10
We had another backport (e.g. 623e5c8ae32b in 4.4.115), but it applies
the new mutex also to the code paths that are invoked via faked
kernel-to-kernel ioctls. As reported recently, this leads to a
deadlock at suspend (or other scenarios triggering the kernel
sequencer client).
This patch addresses the issue by taking the mutex only in the code
paths invoked by user-space, just like the original fix patch does.
Reported-and-tested-by: Andres Bertens <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Tagged as 4.4.x, but should be applied to other older kernels, too.
sound/core/seq/seq_clientmgr.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -2196,7 +2196,6 @@ static int snd_seq_do_ioctl(struct snd_s
void __user *arg)
{
struct seq_ioctl_table *p;
- int ret;
switch (cmd) {
case SNDRV_SEQ_IOCTL_PVERSION:
@@ -2210,12 +2209,8 @@ static int snd_seq_do_ioctl(struct snd_s
if (! arg)
return -EFAULT;
for (p = ioctl_tables; p->cmd; p++) {
- if (p->cmd == cmd) {
- mutex_lock(&client->ioctl_mutex);
- ret = p->func(client, arg);
- mutex_unlock(&client->ioctl_mutex);
- return ret;
- }
+ if (p->cmd == cmd)
+ return p->func(client, arg);
}
pr_debug("ALSA: seq unknown ioctl() 0x%x (type='%c', number=0x%02x)\n",
cmd, _IOC_TYPE(cmd), _IOC_NR(cmd));
@@ -2226,11 +2221,15 @@ static int snd_seq_do_ioctl(struct snd_s
static long snd_seq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct snd_seq_client *client = file->private_data;
+ long ret;
if (snd_BUG_ON(!client))
return -ENXIO;
- return snd_seq_do_ioctl(client, cmd, (void __user *) arg);
+ mutex_lock(&client->ioctl_mutex);
+ ret = snd_seq_do_ioctl(client, cmd, (void __user *) arg);
+ mutex_unlock(&client->ioctl_mutex);
+ return ret;
}
#ifdef CONFIG_COMPAT
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo A. R. Silva <[email protected]>
commit 24dbc6000f4b9b0ef5a9daecb161f1907733765a upstream.
Currently, x86_cache_size is of type int, which makes no sense as we
will never have a valid cache size equal or less than 0. So instead of
initializing this variable to -1, it can perfectly be initialized to 0
and use it as an unsigned variable instead.
Suggested-by: Thomas Gleixner <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Addresses-Coverity-ID: 1464429
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/processor.h | 2 +-
arch/x86/kernel/cpu/common.c | 2 +-
arch/x86/kernel/cpu/microcode/intel.c | 2 +-
arch/x86/kernel/cpu/proc.c | 4 ++--
4 files changed, 5 insertions(+), 5 deletions(-)
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -113,7 +113,7 @@ struct cpuinfo_x86 {
char x86_vendor_id[16];
char x86_model_id[64];
/* in KB - valid for CPUS which support this call: */
- int x86_cache_size;
+ unsigned int x86_cache_size;
int x86_cache_alignment; /* In bytes */
/* Cache QoS architectural values: */
int x86_cache_max_rmid; /* max index */
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -955,7 +955,7 @@ static void identify_cpu(struct cpuinfo_
int i;
c->loops_per_jiffy = loops_per_jiffy;
- c->x86_cache_size = -1;
+ c->x86_cache_size = 0;
c->x86_vendor = X86_VENDOR_UNKNOWN;
c->x86_model = c->x86_mask = 0; /* So far unknown... */
c->x86_vendor_id[0] = '\0'; /* Unset */
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -1075,7 +1075,7 @@ static struct microcode_ops microcode_in
static int __init calc_llc_size_per_core(struct cpuinfo_x86 *c)
{
- u64 llc_size = c->x86_cache_size * 1024;
+ u64 llc_size = c->x86_cache_size * 1024ULL;
do_div(llc_size, c->x86_max_cores);
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -87,8 +87,8 @@ static int show_cpuinfo(struct seq_file
}
/* Cache size */
- if (c->x86_cache_size >= 0)
- seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
+ if (c->x86_cache_size)
+ seq_printf(m, "cache size\t: %u KB\n", c->x86_cache_size);
show_cpuinfo_core(m, c, cpu);
show_cpuinfo_misc(m, c);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 8dd601fa8317243be887458c49f6c29c2f3d719f upstream.
dec_pending() is given an error status (possibly 0) to be recorded
against a bio. It can be called several times on the one 'struct
dm_io', and it is careful to only assign a non-zero error to
io->status. However when it then assigned io->status to bio->bi_status,
it is not careful and could overwrite a genuine error status with 0.
This can happen when chained bios are in use. If a bio is chained
beneath the bio that this dm_io is handling, the child bio might
complete and set bio->bi_status before the dm_io completes.
This has been possible since chained bios were introduced in 3.14, and
has become a lot easier to trigger with commit 18a25da84354 ("dm: ensure
bio submission follows a depth-first tree walk") as that commit caused
dm to start using chained bios itself.
A particular failure mode is that if a bio spans an 'error' target and a
working target, the 'error' fragment will complete instantly and set the
->bi_status, and the other fragment will normally complete a little
later, and will clear ->bi_status.
The fix is simply to only assign io_error to bio->bi_status when
io_error is not zero.
Reported-and-tested-by: Milan Broz <[email protected]>
Cc: [email protected] (v3.14+)
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -974,7 +974,8 @@ static void dec_pending(struct dm_io *io
} else {
/* done with normal IO or empty flush */
trace_block_bio_complete(md->queue, bio, io_error);
- bio->bi_error = io_error;
+ if (io_error)
+ bio->bi_error = io_error;
bio_endio(bio);
}
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
commit 7ac8ff95f48cbfa609a060fd6a1e361dd62feeb3 upstream.
IPv6 doesn't work on the MacchiatoBIN board. It is caused by broken
multicast address filter in the mvpp2 driver.
The driver loads doesn't load any multicast entries if "allmulti" is not
set. This condition should be reversed.
The condition !netdev_mc_empty(dev) is useless (because
netdev_for_each_mc_addr is nop if the list is empty).
This patch also fixes a possible overflow of the multicast list - if
mvpp2_prs_mac_da_accept fails, we set the allmulti flag and retry.
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -5666,6 +5666,7 @@ static void mvpp2_set_rx_mode(struct net
int id = port->id;
bool allmulti = dev->flags & IFF_ALLMULTI;
+retry:
mvpp2_prs_mac_promisc_set(priv, id, dev->flags & IFF_PROMISC);
mvpp2_prs_mac_multi_set(priv, id, MVPP2_PE_MAC_MC_ALL, allmulti);
mvpp2_prs_mac_multi_set(priv, id, MVPP2_PE_MAC_MC_IP6, allmulti);
@@ -5673,9 +5674,13 @@ static void mvpp2_set_rx_mode(struct net
/* Remove all port->id's mcast enries */
mvpp2_prs_mcast_del_all(priv, id);
- if (allmulti && !netdev_mc_empty(dev)) {
- netdev_for_each_mc_addr(ha, dev)
- mvpp2_prs_mac_da_accept(priv, id, ha->addr, true);
+ if (!allmulti) {
+ netdev_for_each_mc_addr(ha, dev) {
+ if (mvpp2_prs_mac_da_accept(priv, id, ha->addr, true)) {
+ allmulti = true;
+ goto retry;
+ }
+ }
}
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit 9cb18db0701f6b74f0c45c23ad767b3ebebe37f6 upstream.
Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at the parent rather than just matching
on its children.
To make things worse, the parent display node was also prematurely
freed.
Note that the display and timings node references are never put after a
successful dt-initialisation so the nodes would leak on later probe
deferrals and on driver unbind.
Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Cc: stable <[email protected]> # 3.13
Cc: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/atmel_lcdfb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -1120,7 +1120,7 @@ static int atmel_lcdfb_of_init(struct at
goto put_display_node;
}
- timings_np = of_find_node_by_name(display_np, "display-timings");
+ timings_np = of_get_child_by_name(display_np, "display-timings");
if (!timings_np) {
dev_err(dev, "failed to find display-timings node\n");
ret = -ENODEV;
@@ -1141,6 +1141,12 @@ static int atmel_lcdfb_of_init(struct at
fb_add_videomode(&fb_vm, &info->modelist);
}
+ /*
+ * FIXME: Make sure we are not referencing any fields in display_np
+ * and timings_np and drop our references to them before returning to
+ * avoid leaking the nodes on probe deferral and driver unbind.
+ */
+
return 0;
put_timings_node:
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 3343647813fdf0f2409fbf5816ee3e0622168079 upstream.
Without this tag, we get a build warning:
WARNING: modpost: missing MODULE_LICENSE() in arch/arm/mach-pxa/tosa-bt.o
For completeness, I'm also adding author and description fields.
Acked-by: Robert Jarzmik <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-pxa/tosa-bt.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -132,3 +132,7 @@ static struct platform_driver tosa_bt_dr
},
};
module_platform_driver(tosa_bt_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Bluetooth built-in chip control");
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
commit 1846430c24d66e85cc58286b3319c82cd54debb2 upstream.
In cases that the whole fs flips into readonly status due to failures in
critical sections, then log tree's blocks are still dirty, and this leads
to a crash during umount time, the crash is about use-after-free,
umount
-> close_ctree
-> stop workers
-> iput(btree_inode)
-> iput_final
-> write_inode_now
-> ...
-> queue job on stop'd workers
cc: <[email protected]> v3.12+
Fixes: 681ae50917df ("Btrfs: cleanup reserved space when freeing tree log on error")
Signed-off-by: Liu Bo <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2445,6 +2445,9 @@ static noinline int walk_down_log_tree(s
next);
btrfs_wait_tree_block_writeback(next);
btrfs_tree_unlock(next);
+ } else {
+ if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags))
+ clear_extent_buffer_dirty(next);
}
WARN_ON(root_owner !=
@@ -2524,6 +2527,9 @@ static noinline int walk_up_log_tree(str
next);
btrfs_wait_tree_block_writeback(next);
btrfs_tree_unlock(next);
+ } else {
+ if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags))
+ clear_extent_buffer_dirty(next);
}
WARN_ON(root_owner != BTRFS_TREE_LOG_OBJECTID);
@@ -2600,6 +2606,9 @@ static int walk_log_tree(struct btrfs_tr
clean_tree_block(trans, log->fs_info, next);
btrfs_wait_tree_block_writeback(next);
btrfs_tree_unlock(next);
+ } else {
+ if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &next->bflags))
+ clear_extent_buffer_dirty(next);
}
WARN_ON(log->root_key.objectid !=
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hui Wang <[email protected]>
commit 3f2f7c553d077be6a30cb96b2976a2c940bf5335 upstream.
One of them has the codec of alc256 and the other one has the codec
of alc289.
Cc: <[email protected]>
Signed-off-by: Hui Wang <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5976,6 +5976,11 @@ static const struct snd_hda_pin_quirk al
{0x14, 0x90170110},
{0x21, 0x02211020}),
SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
+ {0x12, 0x90a60130},
+ {0x14, 0x90170110},
+ {0x14, 0x01011020},
+ {0x21, 0x0221101f}),
+ SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC256_STANDARD_PINS),
SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC280_FIXUP_HP_GPIO4,
{0x12, 0x90a60130},
@@ -6031,6 +6036,10 @@ static const struct snd_hda_pin_quirk al
{0x12, 0x90a60120},
{0x14, 0x90170110},
{0x21, 0x0321101f}),
+ SND_HDA_PIN_QUIRK(0x10ec0289, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE,
+ {0x12, 0xb7a60130},
+ {0x14, 0x90170110},
+ {0x21, 0x04211020}),
SND_HDA_PIN_QUIRK(0x10ec0290, 0x103c, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1,
ALC290_STANDARD_PINS,
{0x15, 0x04211040},
On Wed, Feb 21, 2018 at 01:44:43PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.117 release.
> There are 33 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Feb 23 12:43:54 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.117-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Merged, compiled, and flashed onto my Pixel 2 XL and OnePlus 5.
No conflicts and no apparent issues in dmesg or general usage (I've been
running the RC before this one since yesterday afternoon and not much
changed for Android since then).
Thanks!
Nathan
On Wed, Feb 21, 2018 at 07:46:26AM -0700, Nathan Chancellor wrote:
> On Wed, Feb 21, 2018 at 01:44:43PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.117 release.
> > There are 33 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri Feb 23 12:43:54 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.117-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Merged, compiled, and flashed onto my Pixel 2 XL and OnePlus 5.
>
> No conflicts and no apparent issues in dmesg or general usage (I've been
> running the RC before this one since yesterday afternoon and not much
> changed for Android since then).
Great, thanks for testing and letting me know.
greg k-h
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhouyi Zhou <[email protected]>
commit 06f29cc81f0350261f59643a505010531130eea0 upstream.
In the function __ext4_grp_locked_error(), __save_error_info()
is called to save error info in super block block, but does not sync
that information to disk to info the subsequence fsck after reboot.
This patch writes the error information to disk. After this patch,
I think there is no obvious EXT4 error handle branches which leads to
"Remounting filesystem read-only" will leave the disk partition miss
the subsequence fsck.
Signed-off-by: Zhouyi Zhou <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/super.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -688,6 +688,7 @@ __acquires(bitlock)
}
ext4_unlock_group(sb, grp);
+ ext4_commit_super(sb, 1);
ext4_handle_error(sb);
/*
* We only get here in the ERRORS_RO case; relocking the group
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit c713fb071edc0efc01a955f65a006b0e1795d2eb upstream.
There has been a coding error in rtl8821ae since it was first introduced,
namely that an 8-bit register was read using a 16-bit read in
_rtl8821ae_dbi_read(). This error was fixed with commit 40b368af4b75
("rtlwifi: Fix alignment issues"); however, this change led to
instability in the connection. To restore stability, this change
was reverted in commit b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection
lost problem").
Unfortunately, the unaligned access causes machine checks in ARM
architecture, and we were finally forced to find the actual cause of the
problem on x86 platforms. Following a suggestion from Pkshih
<[email protected]>, it was found that increasing the ASPM L1
latency from 0 to 7 fixed the instability. This parameter was varied to
see if a smaller value would work; however, it appears that 7 is the
safest value. A new symbol is defined for this quantity, thus it can be
easily changed if necessary.
Fixes: b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem")
Cc: Stable <[email protected]> # 4.14+
Fix-suggested-by: Pkshih <[email protected]>
Signed-off-by: Larry Finger <[email protected]>
Tested-by: James Cameron <[email protected]> # x86_64 OLPC NL3
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 5 +++--
drivers/net/wireless/realtek/rtlwifi/wifi.h | 1 +
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -1127,7 +1127,7 @@ static u8 _rtl8821ae_dbi_read(struct rtl
}
if (0 == tmp) {
read_addr = REG_DBI_RDATA + addr % 4;
- ret = rtl_read_word(rtlpriv, read_addr);
+ ret = rtl_read_byte(rtlpriv, read_addr);
}
return ret;
}
@@ -1169,7 +1169,8 @@ static void _rtl8821ae_enable_aspm_back_
}
tmp = _rtl8821ae_dbi_read(rtlpriv, 0x70f);
- _rtl8821ae_dbi_write(rtlpriv, 0x70f, tmp | BIT(7));
+ _rtl8821ae_dbi_write(rtlpriv, 0x70f, tmp | BIT(7) |
+ ASPM_L1_LATENCY << 3);
tmp = _rtl8821ae_dbi_read(rtlpriv, 0x719);
_rtl8821ae_dbi_write(rtlpriv, 0x719, tmp | BIT(3) | BIT(4));
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -99,6 +99,7 @@
#define RTL_USB_MAX_RX_COUNT 100
#define QBSS_LOAD_SIZE 5
#define MAX_WMMELE_LENGTH 64
+#define ASPM_L1_LATENCY 7
#define TOTAL_CAM_ENTRY 32
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
commit 900c9981680067573671ecc5cbfa7c5770be3a40 upstream.
The highest objectid, which is assigned to new inode, is decided at
the time of initializing fs roots. However, in cases where log replay
gets processed, the btree which fs root owns might be changed, so we
have to search it again for the highest objectid, otherwise creating
new inode would end up with -EEXIST.
cc: <[email protected]> v4.4-rc6+
Fixes: f32e48e92596 ("Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots")
Signed-off-by: Liu Bo <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -26,6 +26,7 @@
#include "print-tree.h"
#include "backref.h"
#include "hash.h"
+#include "inode-map.h"
/* magic values for the inode_only field in btrfs_log_inode:
*
@@ -5523,6 +5524,23 @@ again:
path);
}
+ if (!ret && wc.stage == LOG_WALK_REPLAY_ALL) {
+ struct btrfs_root *root = wc.replay_dest;
+
+ btrfs_release_path(path);
+
+ /*
+ * We have just replayed everything, and the highest
+ * objectid of fs roots probably has changed in case
+ * some inode_item's got replayed.
+ *
+ * root->objectid_mutex is not acquired as log replay
+ * could only happen during mount.
+ */
+ ret = btrfs_find_highest_objectid(root,
+ &root->highest_objectid);
+ }
+
key.offset = found_key.offset - 1;
wc.replay_dest->log_root = NULL;
free_extent_buffer(log->node);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit 6ffb5b4f248fe53e0361b8cbc2a523b432566442 upstream.
The interrupt-parent of rtc was missing, add it.
Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: [email protected] # v3.8+
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/spear600.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -194,6 +194,7 @@
rtc@fc900000 {
compatible = "st,spear600-rtc";
reg = <0xfc900000 0x1000>;
+ interrupt-parent = <&vic0>;
interrupts = <10>;
status = "disabled";
};
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lassi Ylikojola <[email protected]>
commit 5e35dc0338d85ccebacf3f77eca1e5dea73155e8 upstream.
Add quirk to ensure a sync endpoint is properly configured.
This patch is a fix for same symptoms on Behringer UFX1204 as patch
from Albertto Aquirre on Dec 8 2016 for Axe-Fx II.
Signed-off-by: Lassi Ylikojola <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/pcm.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -348,6 +348,15 @@ static int set_sync_ep_implicit_fb_quirk
alts = &iface->altsetting[1];
goto add_sync_ep;
+ case USB_ID(0x1397, 0x0002):
+ ep = 0x81;
+ iface = usb_ifnum_to_if(dev, 1);
+
+ if (!iface || iface->num_altsetting == 0)
+ return -EINVAL;
+
+ alts = &iface->altsetting[1];
+ goto add_sync_ep;
}
if (attr == USB_ENDPOINT_SYNC_ASYNC &&
altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC &&
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit cdd10409914184c7eee5ae3e11beb890c9c16c61 upstream.
The "dmas" cells for the designware DMA controller need to have only 3
properties apart from the phandle: request line, src master and
destination master. But the commit 6e8887f60f60 updated it incorrectly
while moving from platform code to DT. Fix it.
Cc: [email protected] # v3.10+
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/devicetree/bindings/dma/snps-dma.txt | 2 +-
arch/arm/boot/dts/spear1340.dtsi | 4 ++--
arch/arm/boot/dts/spear13xx.dtsi | 6 +++---
3 files changed, 6 insertions(+), 6 deletions(-)
--- a/Documentation/devicetree/bindings/dma/snps-dma.txt
+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
@@ -58,6 +58,6 @@ Example:
interrupts = <0 35 0x4>;
status = "disabled";
dmas = <&dmahost 12 0 1>,
- <&dmahost 13 0 1 0>;
+ <&dmahost 13 1 0>;
dma-names = "rx", "rx";
};
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -141,8 +141,8 @@
reg = <0xb4100000 0x1000>;
interrupts = <0 105 0x4>;
status = "disabled";
- dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
- <&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
+ dmas = <&dwdma0 12 0 1>,
+ <&dwdma0 13 1 0>;
dma-names = "tx", "rx";
};
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -100,7 +100,7 @@
reg = <0xb2800000 0x1000>;
interrupts = <0 29 0x4>;
status = "disabled";
- dmas = <&dwdma0 0 0 0 0>;
+ dmas = <&dwdma0 0 0 0>;
dma-names = "data";
};
@@ -288,8 +288,8 @@
#size-cells = <0>;
interrupts = <0 31 0x4>;
status = "disabled";
- dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
- <&dwdma0 0x0280 0 0 0>; /* 0x5 << 7 */
+ dmas = <&dwdma0 4 0 0>,
+ <&dwdma0 5 0 0>;
dma-names = "tx", "rx";
};
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stewart Smith <[email protected]>
commit 5b8b58063029f02da573120ef4dc9079822e3cda upstream.
According to the OPAL docs:
skiboot-5.2.5/doc/opal-api/opal-rtc-read-3.txt
skiboot-5.2.5/doc/opal-api/opal-rtc-write-4.txt
OPAL_HARDWARE may be returned from OPAL_RTC_READ or OPAL_RTC_WRITE and
this indicates either a transient or permanent error.
Prior to this patch, Linux was not dealing with OPAL_HARDWARE being a
permanent error particularly well, in that you could end up in a busy
loop.
This was not too hard to trigger on an AMI BMC based OpenPOWER machine
doing a continuous "ipmitool mc reset cold" to the BMC, the result of
that being that we'd get stuck in an infinite loop in
opal_get_rtc_time().
We now retry a few times before returning the error higher up the
stack.
Fixes: 16b1d26e77b1 ("rtc/tpo: Driver to support rtc and wakeup on PowerNV platform")
Cc: [email protected] # v3.19+
Signed-off-by: Stewart Smith <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-opal.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/rtc/rtc-opal.c
+++ b/drivers/rtc/rtc-opal.c
@@ -58,6 +58,7 @@ static void tm_to_opal(struct rtc_time *
static int opal_get_rtc_time(struct device *dev, struct rtc_time *tm)
{
long rc = OPAL_BUSY;
+ int retries = 10;
u32 y_m_d;
u64 h_m_s_ms;
__be32 __y_m_d;
@@ -67,8 +68,11 @@ static int opal_get_rtc_time(struct devi
rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms);
if (rc == OPAL_BUSY_EVENT)
opal_poll_events(NULL);
- else
+ else if (retries-- && (rc == OPAL_HARDWARE
+ || rc == OPAL_INTERNAL_ERROR))
msleep(10);
+ else if (rc != OPAL_BUSY && rc != OPAL_BUSY_EVENT)
+ break;
}
if (rc != OPAL_SUCCESS)
@@ -84,6 +88,7 @@ static int opal_get_rtc_time(struct devi
static int opal_set_rtc_time(struct device *dev, struct rtc_time *tm)
{
long rc = OPAL_BUSY;
+ int retries = 10;
u32 y_m_d = 0;
u64 h_m_s_ms = 0;
@@ -92,8 +97,11 @@ static int opal_set_rtc_time(struct devi
rc = opal_rtc_write(y_m_d, h_m_s_ms);
if (rc == OPAL_BUSY_EVENT)
opal_poll_events(NULL);
- else
+ else if (retries-- && (rc == OPAL_HARDWARE
+ || rc == OPAL_INTERNAL_ERROR))
msleep(10);
+ else if (rc != OPAL_BUSY && rc != OPAL_BUSY_EVENT)
+ break;
}
return rc == OPAL_SUCCESS ? 0 : -EIO;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Torvalds <[email protected]>
commit c0eb027e5aef70b71e5a38ee3e264dc0b497f343 upstream.
Normal pathname lookup doesn't allow empty pathnames, but using
AT_EMPTY_PATH (with name_to_handle_at() or fstatat(), for example) you
can trigger an empty pathname lookup.
And not only is the RCU lookup in that case entirely unnecessary
(because we'll obviously immediately finalize the end result), it is
actively wrong.
Why? An empth path is a special case that will return the original
'dirfd' dentry - and that dentry may not actually be RCU-free'd,
resulting in a potential use-after-free if we were to initialize the
path lazily under the RCU read lock and depend on complete_walk()
finalizing the dentry.
Found by syzkaller and KASAN.
Reported-by: Dmitry Vyukov <[email protected]>
Reported-by: Vegard Nossum <[email protected]>
Acked-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Cc: Eric Biggers <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/namei.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2000,6 +2000,9 @@ static const char *path_init(struct name
int retval = 0;
const char *s = nd->name->name;
+ if (!*s)
+ flags &= ~LOOKUP_RCU;
+
nd->last_type = LAST_ROOT; /* if there are only slashes... */
nd->flags = flags | LOOKUP_JUMPED | LOOKUP_PARENT;
nd->depth = 0;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Pitre <[email protected]>
commit 724ba8b30b044aa0d94b1cd374fc15806cdd6f18 upstream.
When this method is set, the caller expects struct console_font fields
to be properly initialized when it returns. Leave it unset otherwise
nonsensical (leaked kernel stack) values are returned to user space.
Signed-off-by: Nicolas Pitre <[email protected]>
Cc: [email protected]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/console/dummycon.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/video/console/dummycon.c
+++ b/drivers/video/console/dummycon.c
@@ -68,7 +68,6 @@ const struct consw dummy_con = {
.con_switch = DUMMY,
.con_blank = DUMMY,
.con_font_set = DUMMY,
- .con_font_get = DUMMY,
.con_font_default = DUMMY,
.con_font_copy = DUMMY,
.con_set_palette = DUMMY,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Andersson <[email protected]>
commit d1bf2d30728f310f72296b54f0651ecdb09cbb12 upstream.
Propagate the error of devfreq_add_device() in devm_devfreq_add_device()
rather than statically returning ENOMEM. This makes it slightly faster
to pinpoint the cause of a returned error.
Fixes: 8cd84092d35e ("PM / devfreq: Add resource-managed function for devfreq device")
Cc: [email protected]
Acked-by: Chanwoo Choi <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/devfreq/devfreq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -583,7 +583,7 @@ struct devfreq *devm_devfreq_add_device(
devfreq = devfreq_add_device(dev, profile, governor_name, data);
if (IS_ERR(devfreq)) {
devres_free(ptr);
- return ERR_PTR(-ENOMEM);
+ return devfreq;
}
*ptr = devfreq;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liu Bo <[email protected]>
commit e89166990f11c3f21e1649d760dd35f9e410321c upstream.
@cur_offset is not set back to what it should be (@cow_start) if
btrfs_next_leaf() returns something wrong, and the range [cow_start,
cur_offset) remains locked forever.
cc: <[email protected]>
Signed-off-by: Liu Bo <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1292,8 +1292,11 @@ next_slot:
leaf = path->nodes[0];
if (path->slots[0] >= btrfs_header_nritems(leaf)) {
ret = btrfs_next_leaf(root, path);
- if (ret < 0)
+ if (ret < 0) {
+ if (cow_start != (u64)-1)
+ cur_offset = cow_start;
goto error;
+ }
if (ret > 0)
break;
leaf = path->nodes[0];
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit af27d9403f5b80685b79c88425086edccecaf711 upstream.
We get a warning about some slow configurations in randconfig kernels:
mm/memory.c:83:2: error: #warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid. [-Werror=cpp]
The warning is reasonable by itself, but gets in the way of randconfig
build testing, so I'm hiding it whenever CONFIG_COMPILE_TEST is set.
The warning was added in 2013 in commit 75980e97dacc ("mm: fold
page->_last_nid into page->flags where possible").
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memory.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -72,7 +72,7 @@
#include "internal.h"
-#ifdef LAST_CPUPID_NOT_IN_PAGE_FLAGS
+#if defined(LAST_CPUPID_NOT_IN_PAGE_FLAGS) && !defined(CONFIG_COMPILE_TEST)
#warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid.
#endif
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jack Morgenstein <[email protected]>
commit 852f6927594d0d3e8632c889b2ab38cbc46476ad upstream.
Allocating steerable UD QPs depends on having at least one IB port,
while releasing those QPs does not.
As a result, when there are only ETH ports, the IB (RoCE) driver
requests releasing a qp range whose base qp is zero, with
qp count zero.
When SR-IOV is enabled, and the VF driver is running on a VM over
a hypervisor which treats such qp release calls as errors
(rather than NOPs), we see lines in the VM message log like:
mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0
Fix this by adding a check for a zero count in mlx4_release_qp_range()
(which thus treats releasing 0 qps as a nop), and eliminating the
check for device managed flow steering when releasing steerable UD QPs.
(Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it
remains NULL when steerable UD QPs are not allocated).
Fixes: 4196670be786 ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device")
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/infiniband/hw/mlx4/main.c | 13 +++++--------
drivers/net/ethernet/mellanox/mlx4/qp.c | 3 +++
2 files changed, 8 insertions(+), 8 deletions(-)
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -2483,9 +2483,8 @@ err_steer_free_bitmap:
kfree(ibdev->ib_uc_qpns_bitmap);
err_steer_qp_release:
- if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED)
- mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
- ibdev->steer_qpn_count);
+ mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
+ ibdev->steer_qpn_count);
err_counter:
for (i = 0; i < ibdev->num_ports; ++i)
mlx4_ib_delete_counters_table(ibdev, &ibdev->counters_table[i]);
@@ -2586,11 +2585,9 @@ static void mlx4_ib_remove(struct mlx4_d
ibdev->iboe.nb.notifier_call = NULL;
}
- if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED) {
- mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
- ibdev->steer_qpn_count);
- kfree(ibdev->ib_uc_qpns_bitmap);
- }
+ mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
+ ibdev->steer_qpn_count);
+ kfree(ibdev->ib_uc_qpns_bitmap);
iounmap(ibdev->uar_map);
for (p = 0; p < ibdev->num_ports; ++p)
--- a/drivers/net/ethernet/mellanox/mlx4/qp.c
+++ b/drivers/net/ethernet/mellanox/mlx4/qp.c
@@ -280,6 +280,9 @@ void mlx4_qp_release_range(struct mlx4_d
u64 in_param = 0;
int err;
+ if (!cnt)
+ return;
+
if (mlx4_is_mfunc(dev)) {
set_param_l(&in_param, base_qpn);
set_param_h(&in_param, cnt);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patrice Chotard <[email protected]>
commit 7ac1f59c09a61e6af6622df6809e003b0af07f3d upstream.
The GPIO polarity is missing in the hdmi,hpd-gpio property, this
fixes the following DT warnings:
arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000
[arnd: marked Cc:stable since this warning shows up with the latest dtc
by default, and is more likely to actually cause problems than the
other patches from this series]
Cc: [email protected]
Signed-off-by: Patrice Chotard <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/stih407.dtsi | 3 ++-
arch/arm/boot/dts/stih410.dtsi | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -8,6 +8,7 @@
*/
#include "stih407-clock.dtsi"
#include "stih407-family.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
soc {
sti-display-subsystem {
@@ -112,7 +113,7 @@
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
+ hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -9,6 +9,7 @@
#include "stih410-clock.dtsi"
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
bdisp0 = &bdisp0;
@@ -203,7 +204,7 @@
<&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>;
- hdmi,hpd-gpio = <&pio5 3>;
+ hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
reset-names = "hdmi";
resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
ddc = <&hdmiddc>;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
I ran into a 4.9 build warning in randconfig testing, starting with the
KAISER patches:
arch/x86/kernel/ldt.c: In function 'alloc_ldt_struct':
arch/x86/include/asm/pgtable_types.h:208:24: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
#define __PAGE_KERNEL (__PAGE_KERNEL_EXEC | _PAGE_NX)
^
arch/x86/kernel/ldt.c:81:6: note: in expansion of macro '__PAGE_KERNEL'
__PAGE_KERNEL);
^~~~~~~~~~~~~
I originally ran into this last year when the patches were part of linux-next,
and tried to work around it by using the proper 'pteval_t' types consistently,
but that caused additional problems.
This takes a much simpler approach, and makes the argument type of the dummy
helper always 64-bit, which is wide enough for any page table layout and
won't hurt since this call is just an empty stub anyway.
Fixes: 8f0baadf2bea ("kaiser: merged update")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Kees Cook <[email protected]>
Acked-by: Hugh Dickins <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/kaiser.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/kaiser.h
+++ b/include/linux/kaiser.h
@@ -32,7 +32,7 @@ static inline void kaiser_init(void)
{
}
static inline int kaiser_add_mapping(unsigned long addr,
- unsigned long size, unsigned long flags)
+ unsigned long size, u64 flags)
{
return 0;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 5c1037196b9ee75897c211972de370ed1336ec8f upstream.
The ohci-hcd node has an interrupt number but no interrupt-parent,
leading to a warning with current dtc versions:
arch/arm/boot/dts/s5pv210-aquila.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-goni.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkc110.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-smdkv210.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
arch/arm/boot/dts/s5pv210-torbreck.dtb: Warning (interrupts_property): Missing interrupt-parent for /soc/ohci@ec300000
As seen from the related exynos dts files, the ohci and ehci controllers
always share one interrupt number, and the number is the same here as
well, so setting the same interrupt-parent is the reasonable solution
here.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/s5pv210.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -461,6 +461,7 @@
compatible = "samsung,exynos4210-ohci";
reg = <0xec300000 0x100>;
interrupts = <23>;
+ interrupt-parent = <&vic1>;
clocks = <&clocks CLK_USB_HOST>;
clock-names = "usbhost";
#address-cells = <1>;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 upstream.
With CONFIG_KASAN, we get an overly long stack frame due to inlining
the register access functions:
drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7':
drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
This is caused by a gcc bug that has now been fixed in gcc-8.
To work around the problem, we can pass the register data
through a local variable that older gcc versions can optimize
out as well.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/tuners/r820t.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/media/tuners/r820t.c
+++ b/drivers/media/tuners/r820t.c
@@ -410,9 +410,11 @@ static int r820t_write(struct r820t_priv
return 0;
}
-static int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
+static inline int r820t_write_reg(struct r820t_priv *priv, u8 reg, u8 val)
{
- return r820t_write(priv, reg, &val, 1);
+ u8 tmp = val; /* work around GCC PR81715 with asan-stack=1 */
+
+ return r820t_write(priv, reg, &tmp, 1);
}
static int r820t_read_cache_reg(struct r820t_priv *priv, int reg)
@@ -425,17 +427,18 @@ static int r820t_read_cache_reg(struct r
return -EINVAL;
}
-static int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
+static inline int r820t_write_reg_mask(struct r820t_priv *priv, u8 reg, u8 val,
u8 bit_mask)
{
+ u8 tmp = val;
int rc = r820t_read_cache_reg(priv, reg);
if (rc < 0)
return rc;
- val = (rc & ~bit_mask) | (val & bit_mask);
+ tmp = (rc & ~bit_mask) | (tmp & bit_mask);
- return r820t_write(priv, reg, &val, 1);
+ return r820t_write(priv, reg, &tmp, 1);
}
static int r820t_read(struct r820t_priv *priv, u8 reg, u8 *val, int len)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit f8975cb1b8a36d0839b6365235778dd9df1d04ca upstream.
This fixes the following warning by also sending the flags argument for
gpio controllers:
Property 'cs-gpios', cell 6 is not a phandle reference in
/ahb/apb/spi@e0100000
Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: [email protected] # v3.8+
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/spear1310-evb.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -349,7 +349,7 @@
spi0: spi@e0100000 {
status = "okay";
num-cs = <3>;
- cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>;
+ cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>;
stmpe610@0 {
compatible = "st,stmpe610";
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eugene Syromiatnikov <[email protected]>
commit 6dd0d2d22aa363fec075cb2577ba273ac8462e94 upstream.
For some reason, the implementation of some 16-bit ID system calls
(namely, setuid16/setgid16 and setfsuid16/setfsgid16) used type cast
instead of low2highgid/low2highuid macros for converting [GU]IDs, which
led to incorrect handling of value of -1 (which ought to be considered
invalid).
Discovered by strace test suite.
Cc: [email protected]
Signed-off-by: Eugene Syromiatnikov <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/compat_linux.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -110,7 +110,7 @@ COMPAT_SYSCALL_DEFINE2(s390_setregid16,
COMPAT_SYSCALL_DEFINE1(s390_setgid16, u16, gid)
{
- return sys_setgid((gid_t)gid);
+ return sys_setgid(low2highgid(gid));
}
COMPAT_SYSCALL_DEFINE2(s390_setreuid16, u16, ruid, u16, euid)
@@ -120,7 +120,7 @@ COMPAT_SYSCALL_DEFINE2(s390_setreuid16,
COMPAT_SYSCALL_DEFINE1(s390_setuid16, u16, uid)
{
- return sys_setuid((uid_t)uid);
+ return sys_setuid(low2highuid(uid));
}
COMPAT_SYSCALL_DEFINE3(s390_setresuid16, u16, ruid, u16, euid, u16, suid)
@@ -173,12 +173,12 @@ COMPAT_SYSCALL_DEFINE3(s390_getresgid16,
COMPAT_SYSCALL_DEFINE1(s390_setfsuid16, u16, uid)
{
- return sys_setfsuid((uid_t)uid);
+ return sys_setfsuid(low2highuid(uid));
}
COMPAT_SYSCALL_DEFINE1(s390_setfsgid16, u16, gid)
{
- return sys_setfsgid((gid_t)gid);
+ return sys_setfsgid(low2highgid(gid));
}
static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan-Marek Glogowski <[email protected]>
commit fdcc968a3b290407bcba9d4c90e2fba6d8d928f1 upstream.
These laptops have a combined jack to attach headsets, the U727 on
the left, the U757 on the right, but a headsets microphone doesn't
work. Using hdajacksensetest I found that pin 0x19 changed the
present state when plugging the headset, in addition to 0x21, but
didn't have the correct configuration (shown as "Not connected").
So this sets the configuration to the same values as the headphone
pin 0x21 except for the device type microphone, which makes it
work correctly. With the patch the configured pins for U727 are
Pin 0x12 (Internal Mic, Mobile-In): present = No
Pin 0x14 (Internal Speaker): present = No
Pin 0x19 (Black Mic, Left side): present = No
Pin 0x1d (Internal Aux): present = No
Pin 0x21 (Black Headphone, Left side): present = No
Signed-off-by: Jan-Marek Glogowski <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3130,6 +3130,19 @@ static void alc269_fixup_pincfg_no_hp_to
spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
}
+static void alc269_fixup_pincfg_U7x7_headset_mic(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ unsigned int cfg_headphone = snd_hda_codec_get_pincfg(codec, 0x21);
+ unsigned int cfg_headset_mic = snd_hda_codec_get_pincfg(codec, 0x19);
+
+ if (cfg_headphone && cfg_headset_mic == 0x411111f0)
+ snd_hda_codec_set_pincfg(codec, 0x19,
+ (cfg_headphone & ~AC_DEFCFG_DEVICE) |
+ (AC_JACK_MIC_IN << AC_DEFCFG_DEVICE_SHIFT));
+}
+
static void alc269_fixup_hweq(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -4782,6 +4795,7 @@ enum {
ALC269_FIXUP_LIFEBOOK_EXTMIC,
ALC269_FIXUP_LIFEBOOK_HP_PIN,
ALC269_FIXUP_LIFEBOOK_NO_HP_TO_LINEOUT,
+ ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC,
ALC269_FIXUP_AMIC,
ALC269_FIXUP_DMIC,
ALC269VB_FIXUP_AMIC,
@@ -4972,6 +4986,10 @@ static const struct hda_fixup alc269_fix
.type = HDA_FIXUP_FUNC,
.v.func = alc269_fixup_pincfg_no_hp_to_lineout,
},
+ [ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc269_fixup_pincfg_U7x7_headset_mic,
+ },
[ALC269_FIXUP_AMIC] = {
.type = HDA_FIXUP_PINS,
.v.pins = (const struct hda_pintbl[]) {
@@ -5687,6 +5705,7 @@ static const struct snd_pci_quirk alc269
SND_PCI_QUIRK(0x10cf, 0x159f, "Lifebook E780", ALC269_FIXUP_LIFEBOOK_NO_HP_TO_LINEOUT),
SND_PCI_QUIRK(0x10cf, 0x15dc, "Lifebook T731", ALC269_FIXUP_LIFEBOOK_HP_PIN),
SND_PCI_QUIRK(0x10cf, 0x1757, "Lifebook E752", ALC269_FIXUP_LIFEBOOK_HP_PIN),
+ SND_PCI_QUIRK(0x10cf, 0x1629, "Lifebook U7x7", ALC255_FIXUP_LIFEBOOK_U7x7_HEADSET_MIC),
SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC),
SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC),
SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_BXBT2807_MIC),
On 21 February 2018 at 18:14, Greg Kroah-Hartman
<[email protected]> wrote:
> This is the start of the stable review cycle for the 4.4.117 release.
> There are 33 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Feb 23 12:43:54 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.117-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.
Summary
------------------------------------------------------------------------
kernel: 4.4.117-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 4335fbc640f95fcd163c5883d21db1ea69ac89d3
git describe: v4.4.116-34-g4335fbc640f9
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.116-34-g4335fbc640f9
No regressions (compared to build v4.4.116-31-ga9bb1b3548e5)
Boards, architectures and test suites:
-------------------------------------
juno-r2 - arm64
* boot - pass: 20,
* kselftest - skip: 29, pass: 34,
* libhugetlbfs - skip: 1, pass: 90,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 53, pass: 28,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 2, pass: 61,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 4, pass: 10,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 152, pass: 998,
* ltp-timers-tests - skip: 1, pass: 12,
x15 - arm
* boot - pass: 20,
* kselftest - skip: 29, pass: 33,
* libhugetlbfs - skip: 1, pass: 87,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 17, pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 2, pass: 61,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - skip: 2, pass: 20,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 1, pass: 13,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 98, pass: 1052,
* ltp-timers-tests - skip: 1, pass: 12,
x86_64
* boot - pass: 20,
* kselftest - skip: 32, pass: 48,
* libhugetlbfs - skip: 1, pass: 90,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 17, pass: 64,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 1, pass: 62,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 5, pass: 9,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 120, pass: 1030,
* ltp-timers-tests - skip: 1, pass: 12,
Hikey test results summary,
Summary
------------------------------------------------------------------------
kernel: 4.4.117-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git tag: 4.4.117-rc1-hikey-20180221-136
git commit: 72c8203f873c91e20d9b75b7198937d340eceb84
git describe: 4.4.117-rc1-hikey-20180221-136
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.117-rc1-hikey-20180221-136
No regressions (compared to build 4.4.117-rc1-hikey-20180221-135)
Boards, architectures and test suites:
-------------------------------------
hi6220-hikey - arm64
* boot - pass: 20,
* kselftest - skip: 32, pass: 31,
* libhugetlbfs - skip: 1, pass: 90,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - skip: 53, pass: 28,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - skip: 2, pass: 61,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - skip: 1, pass: 21,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - skip: 4, pass: 10,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - skip: 154, pass: 996,
* ltp-timers-tests - skip: 1, pass: 12,
On 02/21/2018 05:44 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.117 release.
> There are 33 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Feb 23 12:43:54 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.117-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On 02/21/2018 04:44 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.117 release.
> There are 33 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Feb 23 12:43:54 UTC 2018.
> Anything received after that time might be too late.
>
Build results:
total: 145 pass: 145 fail: 0
Qemu test results:
total: 118 pass: 118 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter