ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc3/2.6.7-rc3-mm1/
- Included the dreaded cpumask rework.
- Lots of little fixes.
- Added support for the NX (no execute) pagetable flag on ia32.
Changes since 2.6.7-rc2-mm2:
linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-cifs.patch
bk-driver-core.patch
bk-i2c.patch
bk-input.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
bk-usb.patch
Latest versions of various development trees.
-hiddev-warning-fixes.patch
-ramfs-o_sync-oops-fix.patch
-direct-io-invalidation-fix.patch
-shrink_all_memory-fix.patch
-mm-swapper_spacei_mmap_nonlinear.patch
-mm-follow_page-invalid-pte_page.patch
-mm-vma_adjust-adjust_next-wrap.patch
-mm-vma_adjust-insert-file-earlier.patch
-mm-kill-missed-pte-warning.patch
-ppc32-add-indirect-dcr-access-pass-2.patch
-ppc64-kernel-makefile-options-for-as.patch
-ppc64-update-info-about-available-iseries_veth-interfaces.patch
-ppc64-gives-up-too-quickly-on-hotplugged-cpu.patch
-ext3-htree-rename-fix.patch
-advansys-basic-highmem-dma-support.patch
-partition-table-validity-checking.patch
-tulip-driver-deadlocks-on-device-removal.patch
-3ware-9000-sata-raid-1.patch
-3ware-9000-sata-raid-2.patch
-3ware-9000-driver-update-for-267-rc2-mm2.patch
-knfsd-1-of-11-fix-nfs3-dentry-encoding.patch
-knfsd-2-of-11-nfsd_exp_remove_null_checkpatch.patch
-knfsd-3-of-11-nfsd_acceptable_typopatch.patch
-knfsd-4-of-11-nfsd_xdr_name_encodingpatch.patch
-knfsd-5-of-11-gss_svc_module_refpatch.patch
-knfsd-5-of-11-gss_svc_module_refpatch-fix.patch
-knfsd-5-of-11-gss_svc_module_refpatch-fix2.patch
-knfsd-6-of-11-nfsd_gss_rsc_lookup_freepatch.patch
-knfsd-7-of-11-nfsd-releaselkownerpatch.patch
-knfsd-8-of-11-nfsd-getattr-fixpatch.patch
-knfsd-9-of-11-nfsd-setclientid-fixpatch.patch
-knfsd-10-of-11-nfsd-create-fixpatch.patch
-knfsd-11-of-11-exporting_doc_typospatch.patch
-md-1-of-8-rationalise-device-selection-in-md-multipath.patch
-md-2-of-8-make-sure-md_check_recovery-will-remove-a-faulty-device-when-nr_pending-hits-0.patch
-md-3-of-8-allow-an-md-personality-to-refuse-a-hot-remove-request.patch
-md-4-of-8-make-sure-the-size-of-a-raid5-6-array-is-a-multiple-of-the-chunk-size.patch
-md-5-of-8-handle-hot-add-for-arrays-with-non-persistent-superblocks.patch
-md-6-of-8-abort-the-resync-of-raid1-there-is-only-one-device.patch
-md-7-of-8-allow-md-arrays-to-be-resized-if-devices-are-large-enough.patch
-md-8-of-8-support-reshaping-raid1-arrays-adding-or-removing-drives.patch
-md-8-of-8-support-reshaping-raid1-arrays-adding-or-removing-drives-fix.patch
-reference_init.patch
-selinux-check-processed-security-context-length.patch
-floppy-fix.patch
-balance-on-exec-fix.patch
-fix-loop-device-cache-handling.patch
-fix-possible-null-pointer-in-fs-ext3-superc.patch
-dm_remove_all32.patch
-ide-dont-put-disks-in-standby-mode-on-halt-on-alpha.patch
-ide-fix-for-generic-ide-pci-module.patch
-ide-ide_pci_device_t-sanitization.patch
-ide-merge-amd74xxh-into-amd74xxc.patch
-ide-add-new-nforce-ide-sata-device-ids-to-amd74xxc.patch
-ide-use-generic-ide_init_hwif_ports-on-m68k.patch
-ide-use-asm-i386-ideh-as-asm-x86_64-ideh.patch
-ide-add-ide_arch_obsolete_defaults.patch
-ide-remove-useless-proc-ide-siimage-from-siimagec.patch
-ide-simplify-config_idedma_onlydisk-logic-a-bit.patch
-mm-oom_killc-trivial-cleanup.patch
-use-const-in-timeh-unit-conversion-functions.patch
-fix-io_getevents-timer-expiry-setting.patch
-move-endif-to-correct-place.patch
-hugetlb-msync-fix.patch
-direct-io-hole-fix.patch
-nx-267-rc2-bk2-ae.patch
-nx-267-rc2-bk2-ae-warning-fix.patch
-hugetlb-dtor-reinit.patch
-mtd-jedec-probe-additions.patch
-use-kern_alert-more-for-oopses.patch
-s390-1-4-core-s390.patch
-s390-2-4-common-i-o-layer.patch
-s390-3-4-block-device-driver.patch
-s390-4-4-network-device-driver.patch
-quota-fix-writing-of-quota-info.patch
-fix-for-old-quota-format.patch
-kill-off-efi_dir-in-efih.patch
-update-elilo-loader-location-in-kconfig.patch
-ext3_orphan_del-may-double-decrement-bh-b_count.patch
-use-c99-struct-initializer-in-hotcpu_notifier.patch
-better-names-for-edd-legacy_-fields.patch
-use-decimal-instead-of-hex-for-edd-values.patch
-eep-lost-24-change-for-buslogic-info.patch
-rawdev-driver.patch
-sys_io_setup-fix.patch
-fix-sys-cpumap-for-352-nr_cpus.patch
Merged
+wake_up_forked_thread-fix.patch
CPU scheduler tweak.
+w83627hf-build-fix.patch
+arp_tables-build-fix.patch
Compile fixes
-kgdb-in-sched_functions.patch
Folded into kgdb-ga.patch
-kgdb-in-sched_functions-x86_64.patch
Folded into kgdb-x86_64-support.patch
-kgdb-ia64-fixes.patch
Folded into kgdb-ia64-support.patch
+jbd-descriptor-buffer-state-fix.patch
JBD locking fix
+speedup-flush_workqueue-for-singlethread_workqueue.patch
flush_workqueue() optimisation
+fix-missing-option-in-binutils-version-check.patch
ppc32 build fix
+85xx+e500.l26-20040608.patch
Additional ppc32 CPU variant support
+ppc64-iseries-vio_dev-cleanups.patch
pcp64 driver update
+writeback_inodes-can-race-with-unmount.patch
Fix race between unmount and dirty page writeout.
-input-tsdev-fixes.patch
Fixed by other means.
-jbd-barrier-fallback-on-failure-fix.patch
Folded into jbd-barrier-fallback-on-failure.patch
+ide-print-failed-opcode.patch
IDE barrier debugging
-kernel-parameter-parsing-fix.patch
-kernel-parameter-parsing-fix-fix.patch
Dropped
Move-saved_command_line-to-init-mainc.patch
Updated. Again.
+unalign-page_state.patch
Stack space savings
+perfctr-ifdef-cleanup.patch
perfctr cleanup
+perfctr-cpus_complement-fix.patch
perfctr build fix
+sisfb-update-1710-fixes.patch
+sisfb-build-fix.patch
Updates and fixes for sisfb-update-1710.patch
+nx-2.6.7-rc2-bk2-AF.patch
ia32 no-execute support
+fbcon-prefer-pan-when-available.patch
fb console optimisation
+rawdev-driver-2.patch
New version of the driver which prides access to the raw ps/2 stream
+cpumask-1-10-cpu_present_map-real-even-on-non-smp.patch
+cpumask-2-10-bitmap-cleanup-preparation-for-cpumask.patch
+cpumask-3-10-bitmap-inlining-and-optimizations.patch
+cpumask-5-10-rewrite-cpumaskh-single-bitmap-based.patch
+cpumask-6-10-remove-26-no-longer-used-cpumaskh-files.patch
+cpumask-7-10-remove-obsolete-cpumask-macro-uses-i386-arch.patch
+cpumask-8-10-remove-obsolete-cpumask-macro-uses-other.patch
+x86_64-cpu_online-fix.patch
+ppc64-cpu_online-fix.patch
+cpumask-9-10-remove-no-longer-used-obsolete-macro-emulation.patch
+cpumask-10-10-optimize-various-uses-of-new-cpumasks.patch
+cpumask-11-10-comment-spacing-tweaks.patch
+cleanup-cpumask_t-temporaries.patch
cpumask_t cleanups, simplification, etc.
+fix-and-reenable-msi-support-on-x86_64.patch
+fix-and-reenable-msi-support-on-x86_64-fix.patch
Message Signalled Interrupts for x86_64
+i386-uninline-bitops.patch
Code size reductions
+ext3-journal_flush-needs-journal_lock_updates.patch
ext3 locking fix
+apic-enumeration-fixes.patch
Clean up and fix ia32 APIC enumeration
+use-numa-policy-api-for-boot-time-policy.patch
NUMA simplification/speedup
+typo-in-documentation-fb-framebuffertxt.patch
typo fix
+more-drivers-atm-horizonc-polishing.patch
ATM driver updates
+disable-unnecessary-printk-in-es7000-code.patch
+disable-udf-debugging.patch
Remvoe some boot-time printks
+__arch_want_sys_rt_sigaction-fix.patch
Alpha build fix
+266-memory-allocation-checks-in-eth1394_update.patch
+266-memory-allocation-checks-in-mtdblock_open.patch
+memory-allocation-checks-in-cs46xx_dsp_proc_register_scb_desc.patch
Check for kmalloc failures
+fix-bug-in-raid6-resync-code.patch
RAID6 fix
+cdrom-hardware-defect-mgt-header-length.patch
CDROM driver robustness
+export-dmi-check-functions.patch
Provide an API so that DMI mathcing functions don't all have to be in one
humongous table.
+hp-pavilion-use-dmi-api.patch
Use the above API.
+s390-add-support-for-6-system-call-arguments.patch
Teach s390 to support 6 siscall arguments
+flush_workqueue-locking-simplification.patch
Simplify locking in flush_workqueue()
+fix-pci-hotplug-of-promise-ide-cards.patch
Use the right sections in this IDE driver
+cyclone-pit-sanity-checking.patch
Fix cyclone handling of the timer PIT.
+checkstack-fixes.patch
Various fixups for checkstack.pl
+sys-getdents64-needs-compat-wrapper.patch
32->64 bit emulation fix
+remap_file_pages-speedup.patch
Improved concurrency in remap_file_pages()
+sysctl-uts-write-size.patch
Fix buffer lengths in the UTS sysctls.
+wanxl-firmware-build-fix.patch
Fix `allmodconfig'
+aio-sparse-warning-fix.patch
Fix a `sparse' warning in aio.c
+cciss-ioctl32-update.patch
CCISS driver ioctl emulation
+read_page_state.patch
Infrastructure for stack reductions
+vmscan-use-read_page_state.patch
+page-writeback-use-read_page_state.patch
Stack reductions
+vga16fb-fix-bogus-mem_start-value.patch
Fix the vga16fb driver yet again
+pcmcia-enable-read-prefetch-on-o2micro-bridges-to-fix-hdsp.patch
O2micro pcmcia workaround.
All 274 patches:
linus.patch
wake_up_forked_thread-fix.patch
wake_up_forked_thread() fix
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-cifs.patch
bk-driver-core.patch
bk-i2c.patch
bk-input.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
bk-usb.patch
mm.patch
add -mmN to EXTRAVERSION
bk-input-build-fix.patch
bk-input-build-fix
w83627hf-build-fix.patch
w83627hf.c build fix
arp_tables-build-fix.patch
arp_tables.c build fix
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-ia64-support.patch
IA64 kgdb support
ia64 kgdb repair and cleanup
jbd-descriptor-buffer-state-fix.patch
jbd: descriptor buffer state fix
speedup-flush_workqueue-for-singlethread_workqueue.patch
speedup flush_workqueue for singlethread_workqueue
mp_find_ioapic-oops-fix.patch
mp_find_ioapic cannot be __init
mm-get_user_pages-vs-try_to_unmap.patch
mm: get_user_pages vs. try_to_unmap
mm-flush-tlb-when-clearing-young.patch
mm: flush TLB when clearing young
mm-pretest-pte_young-and-pte_dirty.patch
mm: pretest pte_young and pte_dirty
make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock
radix_tree_tag_set-atomic.patch
Make radix_tree_tag_set/clear atomic wrt the tag
radix_tree_tag_set-only-needs-read_lock.patch
radix_tree_tag_set only needs read_lock()
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix-update-5.patch
must-fix update
mustfix-lists.patch
mustfix lists
fix-missing-option-in-binutils-version-check.patch
ppc32: fix missing option in binutils version check
85xx+e500.l26-20040608.patch
ppc32: support for e500 and 85xx
ppc64-iseries-vio_dev-cleanups.patch
ppc64: iSeries vio_dev cleanups
ppc64-reloc_hide.patch
writeback_inodes-can-race-with-unmount.patch
writeback_inodes can race with unmount
invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes
config_spinline.patch
uninline spinlocks for profiling accuracy.
allow-i386-to-reenable-interrupts-on-lock-contention.patch
Allow i386 to reenable interrupts on lock contention
pdflush-diag.patch
get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem
pci_set_power_state-might-sleep.patch
slab-leak-detector.patch
slab leak detector
mm/slab.c warning in cache_alloc_debugcheck_after
local_bh_enable-warning-fix.patch
schedstats.patch
sched: scheduler statistics
cond_resched-might-sleep.patch
cond_resched() might sleep
fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card
pid_max-fix.patch
Bug when setting pid_max > 32k
non-readable-binaries.patch
Handle non-readable binfmt_misc executables
binfmt_misc-credentials.patch
binfmt_misc: improve calaulation of interpreter's credentials
poll-select-longer-timeouts.patch
poll()/select(): support longer timeouts
poll-select-range-check-fix.patch
poll()/select() range checking fix
poll-select-handle-large-timeouts.patch
poll()/select(): handle long timeouts
add-a-slab-for-ethernet.patch
Add a kmalloc slab for ethernet packets
siimage-update.patch
ide: update for siimage driver
shm-do_munmap-check.patch
stack-overflow-test-fix.patch
Fix stack overflow test for non-8k stacks
jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
oops-dump-preceding-code.patch
i386 oops output: dump preceding code
lockmeter.patch
lockmeter
ia64 CONFIG_LOCKMETER fix
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
ext3_rsv_cleanup.patch
ext3 block reservation patch set -- ext3 preallocation cleanup
ext3_rsv_base.patch
ext3 block reservation patch set -- ext3 block reservation
ext3 reservations: fix performance regression
ext3 block reservation patch set -- mount and ioctl feature
ext3 block reservation patch set -- dynamically increase reservation window
ext3-reservation-default-on.patch
ext3 reservation: default to on
ext3-reservation-ifdef-cleanup-patch.patch
ext3 reservation ifdef cleanup patch
ext3-reservation-max-window-size-check-patch.patch
ext3 reservation max window size check patch
ext3-reservation-file-ioctl-fix.patch
ext3 reservation file ioctl fix
ext3-lazy-discard-reservation-window-patch.patch
ext3 lazy discard reservation window patch
ext3 discard reservation in last iput fix patch
Fix lazy reservation discard
ext3-reservation-bad-inode-fix.patch
ext3 reservations: bad_inode fix
ext3_reservation_discard_race_fix.patch
ext3 reservation discard race fix
clean-up-asm-pgalloch-include.patch
Clean up asm/pgalloc.h include
clean-up-asm-pgalloch-include-2.patch
Clean up asm/pgalloc.h include
clean-up-asm-pgalloch-include-3.patch
Clean up asm/pgalloc.h include 3
ppc64-uninline-__pte_free_tlb.patch
ppc64: uninline __pte_free_tlb()
fix-scancode-keycode-scancode-conversion-for-265.patch
Fix scancode->keycode->scancode conversion
fealnx-mac-address-and-other-issues.patch
Fealnx. Mac address and other issues
reiserfs-group-alloc-9.patch
reiserfs: block allocator optimizations
reiserfs-block-allocator-should-not-inherit-packing-locality.patch
reiserfs: block allocator should not inherit "packing locality 1"
reiserfs-remove-debugging-warning-from-block-allocator.patch
reiserfs: remove debugging warning from block allocator
reiserfs-group-alloc-9-build-fix.patch
reiserfs-group-alloc-9 build fix
reiserfs-search_reada-5.patch
reiserfs: btree readahead
reiserfs-data-logging-support.patch
reiserfs data logging support
force-config_regparm-to-y.patch
Force CONFIG_REGPARM to `y'
hugetlb_shm_group-sysctl-gid-0-fix.patch
hugetlb_shm_group sysctl-gid-0-fix
idr-overflow-fixes.patch
Fixes for idr code
idr-remove-counter.patch
idr: remove counter bits from id's
idr-fixups.patch
IDR fixups
use-idr_get_new-to-allocate-a-bus-id-in-drivers-i2c-i2c-corec-update-to-new-api.patch
use-idr_get_new-to-allocate-a-bus-id-in-drivers-i2c-i2c-corec-update-to-new-api
rlim-add-rlimit-entry-for-controlling-queued-signals.patch
RLIM: add rlimit entry for controlling queued signals
rlim-add-sigpending-field-to-user_struct.patch
RLIM: add sigpending field to user_struct
rlim-pass-task_struct-in-send_signal.patch
RLIM: pass task_struct in send_signal()
rlim-add-simple-get_uid-helper.patch
RLIM: add simple get_uid() helper
rlim-enforce-rlimits-on-queued-signals.patch
RLIM: enforce rlimits on queued signals
rlim-remove-unused-queued_signals-global-accounting.patch
RLIM: remove unused queued_signals global accounting
rlim-add-rlimit-entry-for-posix-mqueue-allocation.patch
RLIM: add rlimit entry for POSIX mqueue allocation
rlim-add-mq_bytes-to-user_struct.patch
RLIM: add mq_bytes to user_struct
rlim-add-mq_attr_ok-helper.patch
RLIM: add mq_attr_ok() helper
rlim-enforce-rlimits-for-posix-mqueue-allocation.patch
RLIM: enforce rlimits for POSIX mqueue allocation
rlim-adjust-default-mqueue-sizes.patch
RLIM: adjust default mqueue sizes
call-might_sleep-in-tasklet_kill.patch
Call might_sleep() in tasklet_kill
really-ptrace-single-step-2.patch
ptrace single-stepping fix
abs-cleanup.patch
abs() cleanup
add-i386-readq.patch
add i386 readq()/writeq()
hpet-driver.patch
HPET driver
hpet-driver-updates.patch
HPET driver updates
hpet-driver-updates-move-readq.patch
hpet-driver-updates-move-readq
hpet-kconfig-loop-fix.patch
HPET: Fix Kconfig dependency loop
hpet-rtc-dependency-fix.patch
HPET RTC dependency fix
hpet-free_irq-deadlock-fix.patch
hpet-free_irq-deadlock-fix
hpet-dont-use-new-major.patch
hpet: don't require a new major
kill-off-pc9800.patch
Remove PC9800 support
more-pc9800-removal.patch
more PC9800 removal
pc9800-merge-std_resourcesc-back-into-setupc.patch
pc9800: merge std_resources.c back into setup.c
ftruncate-vs-block_write_full_page.patch
ftruncate-vs-block_write_full_page
ext3-retry-allocation-after-transaction-commit-v2.patch
Ext3: Retry allocation after transaction commit (v2)
ext3-retry-allocation-after-transaction-commit-v2-jbd-api.patch
ext3-retry-allocation-after-transaction-commit-v2: implement JBD API
sysfs-leaves-mount.patch
sysfs backing store: add sysfs_dirent
sysfs-leaves-dir.patch
sysfs backing store: add sysfs_dirent
sysfs-leaves-file.patch
sysfs backing store: sysfs_create() changes
sysfs-leaves-bin.patch
sysfs backing store: bin attribute changes
sysfs-leaves-symlink.patch
sysfs backing store: sysfs_create_link changes
sysfs-leaves-misc.patch
sysfs backing store: attribute groups and misc routines
pty-allocation-first-fit.patch
Use first-fit for pty allocation
dynpty-fix.patch
dynamic pty allocation fixes
sync_inodes_sb-debug.patch
sync_inodes_sb-debug
vmscan-handle-synchronous-writepage.patch
vmscan: handle synchronous writepage()
vmscan-handle-synchronous-writepage-fix.patch
vmscan-handle-synchronous-writepage-fix
ramdisk-buffer-uptodate-fix.patch
ramdisk: buffer_uptodate fix
2-3-small-tweaks-to-standard-resource-stuff.patch
small tweaks to standard resource stuff
3-3-same-small-tweaks-x86_64-version.patch
same small resource tweaks, x86_64 version
sis900-fix-phy-transceiver-detection.patch
sis900: Fix PHY transceiver detection
getgroups16-fix.patch
getgroups16() fix
ia32-fault-deadlock-fix-2.patch
ia32: fix deadlocks when oopsing while mmap_sem is held
ppc64-fault-deadlock-fix-2.patch
ppc64: fix deadlocks when oopsing while mmap_sem is held
SL0-core-RC6-bk5.patch
symlinks: infrastructure
SL1-ext2-RC6-bk5.patch
symlinks: ext2 conversion
SL2-trivial-RC6-bk5.patch
symlinks: trivial cases
SL3-page-RC6-bk5.patch
symlinks: reuse new helpers
SL4-smb-RC6-bk5.patch
symlinks: smbfs
SL5-xfs-RC6-bk5.patch
symlinks: XFS
SL6-shm-RC6-bk5.patch
symlinks: tmpfs
SL7-befs-RC6-bk5.patch
symlinks: befs
SL8-jffs2-RC6-bk5.patch
symlinks: jffs2
ipr-ppc64-depends.patch
Make ipr.c require ppc
disk-barrier-core.patch
disk barriers: core
disk-barrier-core-tweaks.patch
disk-barrier-core-tweaks
disk-barrier-ide.patch
disk barriers: IDE
disk-barrier-ide-symbol-expoprt.patch
disk-barrier-ide-symbol-expoprt
disk-barrier-ide-warning-fix.patch
disk-barrier ide warning fix
barrier-update.patch
barrier update
disk-barrier-scsi.patch
disk barriers: scsi
disk-barrier-dm.patch
disk barriers: devicemapper
disk-barrier-md.patch
disk barriers: MD
reiserfs-v3-barrier-support.patch
reiserfs v3 barrier support
reiserfs-v3-barrier-support-tweak.patch
reiserfs-v3-barrier-support-tweak
ext3-barrier-support.patch
ext3 barrier support
sync_dirty_buffer-retval.patch
make sync_dirty_buffer() return something useful
jbd-barrier-fallback-on-failure.patch
jbd: barrier fallback on failure
ide-print-failed-opcode.patch
ide: print failed opcode on IO errors
x86-stack-dump-fixes.patch
x86 stack dump fixes
check-return-status-of-register-calls-in-i82365.patch
Check return status of register calls in i82365
invalidate_inodes2-mark-pages-notuptodate.patch
invalidate_inodes2(): mark pages not uptodate
reduce-tlb-flushing-during-process-migration.patch
Reduce TLB flushing during process migration
reduce-tlb-flushing-during-process-migration-oops-fix.patch
reduce-tlb-flushing-during-process-migration oops fix
Move-saved_command_line-to-init-mainc.patch
Move saved_command_line to init/main.c
arch/i386/boot/compressed/misc.c warning fixes
reiserfs-v3-logging-bug-for-blocksize-page-size.patch
reiserfs v3 logging bug for blocksize < page size
read-vs-truncate-race.patch
Fix read() vs truncate race
rcu-lock-update-add-per-cpu-batch-counter.patch
rcu lock update: Add per-cpu batch counter
rcu-lock-update-use-a-sequence-lock-for-starting-batches.patch
rcu lock update: Use a sequence lock for starting batches
rcu-lock-update-code-move-cleanup.patch
rcu lock update: Code move & cleanup
pcm_native-stack-reduction.patch
pcm_native.c stack reduction
cleanups-for-apic.patch
io_apic.c code consolidation
remove-apic_lockup_debug.patch
x86: remove APIC_LOCKUP_DEBUG
remove-io_apic_sync.patch
x86: remove io_apic_sync
vmscan-GFP_NOFS-try-harder.patch
vmscan: try harder for GFP_NOFS allocators
ach1542-mca-build-fix.patch
ahc1542 !CONFIG_MCA build fix
validate-pm-timer-rate-at-boot-time.patch
Validate PM-Timer rate at boot time
enable-suspend-resuming-of-e1000.patch
Enable suspend/resuming of e1000
fix-3c59xc-to-allow-3c905c-100bt-fd.patch
fix 3c59x.c to allow 3c905c 100bT-FD
tty_io-hangup-locking.patch
tty_io.c hangup locking
unalign-page_state.patch
unalign struct page_state
vmscanc-move-writepage-invocation-into-its-own-function.patch
vmscan.c: move ->writepage invocation into its own function
vmscanc-struct-scan_control.patch
vmscan.c: struct scan_control
first-cut-at-fixing-the-3c59x-power-mismanagment.patch
First cut at fixing the 3c59x power mismanagment
kbuild-specify-default-target-during-configuration.patch
kbuild: Specify default target during configuration
runtime-selection-of-config_paride_epatc8.patch
runtime selection of CONFIG_PARIDE_EPATC8
bsd-accounting-format-rework.patch
BSD accounting format rework
bsd-acct-warning-fix.patch
bsd-acct-warning-fix
iso9660-inodes-beyond-4gb.patch
iso9660: fix handling of inodes beyond 4GB
iso9660-inodes-beyond-4gb-fixes.patch
iso9660-inodes-beyond-4gb-fixes
iso9660-comment-cleanup.patch
iso9660: comment cleanup
perfctr-core.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][1/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: core
perfctr-disabled-build-fix.patch
CONFIG_PERFCTR=n build fix
perfctr-i386.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][2/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: i386
perfctr-x86_64.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][3/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: x86_64
perfctr-ppc.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][4/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: PowerPC
perfctr-virtualised-counters.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][5/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: virtualised counters
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-cpus_complement-fix.patch
perfctr-cpus_complement-fix
perfctr-misc.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][6/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: misc
sisfb-update-1710.patch
sisfb update 1.7.10
sisfb-update-1710-fixes.patch
sisfb-update-1710-fixes
sisfb-build-fix.patch
sisfb-build-fix
nfs-writepage-fix.patch
Fix nfs writepage behaviour
3c59x-support-for-ati-radeon-9100-igp.patch
3c59x: support for ATI Radeon 9100 IGP
nx-2.6.7-rc2-bk2-AF.patch
NX (No eXecute) support for x86
1-5-device-mapper-dm-ioc.patch
dm-io: device-mapper i/o library for kcopyd
dm-cache-flushing-fix.patch
dm: cache flushing fix
2-5-device-mapper-kcopyd.patch
Device-mapper: kcopyd
2-5-device-mapper-kcopyd-docs.patch
kcopyd commentary
3-5-device-mapper-snapshots.patch
Device-mapper: snapshots
4-5-device-mapper-mirroring.patch
Device-mapper: mirroring
5-5-device-mapper-dm-zero.patch
Device-mapper: dm-zero
dm-zero-flushing-fix.patch
Device-mapper: dm-zero flushing fix
let-serial_8250_acpi-depend-on-acpi_pci-2.patch
let SERIAL_8250_ACPI depend on ACPI_PCI
export-acpi_register_gsi.patch
export acpi_register_gsi()
submission-of-via-velocitytm-series-adapter-driver.patch
Via "velocity(tm)" series adapter driver
via-velocity-oops-fix.patch
via-velocity oops fix
fb-accel-capabilities.patch
fb accel capabilities
fbcon-prefer-pan-when-available.patch
fbcon: prefer pan when available
rawdev-driver-2.patch
Raw access to serio ports
cpumask-1-10-cpu_present_map-real-even-on-non-smp.patch
cpumask 1/10 cpu_present_map real even on non-smp
cpumask-2-10-bitmap-cleanup-preparation-for-cpumask.patch
cpumask 2/10 bitmap cleanup preparation for cpumask overhaul
cpumask-3-10-bitmap-inlining-and-optimizations.patch
cpumask 3/10 bitmap inlining and optimizations
cpumask-5-10-rewrite-cpumaskh-single-bitmap-based.patch
cpumask 5/10 rewrite cpumask.h - single bitmap based implementation
cpumask-6-10-remove-26-no-longer-used-cpumaskh-files.patch
cpumask 6/10 remove 26 no longer used cpumask*.h files
cpumask-7-10-remove-obsolete-cpumask-macro-uses-i386-arch.patch
cpumask 7/10 remove obsolete cpumask macro uses - i386 arch
cpumask-8-10-remove-obsolete-cpumask-macro-uses-other.patch
cpumask 8/10 remove obsolete cpumask macro uses - other archs
x86_64-cpu_online-fix.patch
x86_64-cpu_online-fix
ppc64-cpu_online-fix.patch
ppc64: cpu_online fix
cpumask-9-10-remove-no-longer-used-obsolete-macro-emulation.patch
cpumask 9/10 Remove no longer used obsolete macro emulation
cpumask-10-10-optimize-various-uses-of-new-cpumasks.patch
cpumask 10/10 optimize various uses of new cpumasks
cpumask-11-10-comment-spacing-tweaks.patch
cpumask: comment, spacing tweaks
cleanup-cpumask_t-temporaries.patch
clean up cpumask_t temporaries
fix-and-reenable-msi-support-on-x86_64.patch
Fix and Reenable MSI Support on x86_64
fix-and-reenable-msi-support-on-x86_64-fix.patch
Fix and Reenable MSI Support on x86_64 fix
i386-uninline-bitops.patch
i386 uninline some bitops
ext3-journal_flush-needs-journal_lock_updates.patch
ext3: journal_flush() needs journal_lock_updates()
apic-enumeration-fixes.patch
APIC enumeration fixes
use-numa-policy-api-for-boot-time-policy.patch
Use numa policy API for boot time policy
typo-in-documentation-fb-framebuffertxt.patch
Typo in Documentation/fb/framebuffer.txt
more-drivers-atm-horizonc-polishing.patch
more drivers/atm/horizon.c polishing
disable-unnecessary-printk-in-es7000-code.patch
Remove unnecessary printk in es7000 code
disable-udf-debugging.patch
Disable UDF debugging
__arch_want_sys_rt_sigaction-fix.patch
__ARCH_WANT_SYS_RT_SIGACTION fix
266-memory-allocation-checks-in-eth1394_update.patch
memory allocation checks in eth1394_update()
266-memory-allocation-checks-in-mtdblock_open.patch
memory allocation checks in mtdblock_open()
memory-allocation-checks-in-cs46xx_dsp_proc_register_scb_desc.patch
memory allocation checks in cs46xx_dsp_proc_register_scb_desc()
fix-bug-in-raid6-resync-code.patch
md: fix BUG in raid6 resync code.
cdrom-hardware-defect-mgt-header-length.patch
cdrom hardware defect mgt header length
export-dmi-check-functions.patch
export DMI check functions
hp-pavilion-use-dmi-api.patch
use new DMI API for HP Pavilion
s390-add-support-for-6-system-call-arguments.patch
s390: add support for 6 system call arguments (FUTEX_CMP_REQUEUE)
flush_workqueue-locking-simplification.patch
flush_workqueue locking simplification
fix-pci-hotplug-of-promise-ide-cards.patch
Fix PCI hotplug of promise IDE cards
cyclone-pit-sanity-checking.patch
cyclone: PIT sanity checking
checkstack-fixes.patch
checksatck.pl fixes
sys-getdents64-needs-compat-wrapper.patch
sys_getdents64 needs compat wrapper
remap_file_pages-speedup.patch
remap_file_pages() speedup
sysctl-uts-write-size.patch
fix uts sysctl write size
wanxl-firmware-build-fix.patch
wanxl firmware build fix
aio-sparse-warning-fix.patch
aio.c sparse warning fix
cciss-ioctl32-update.patch
cciss ioctl32 update
read_page_state.patch
Implement read_page_state
vmscan-use-read_page_state.patch
vmscan.c: use read_page_state()
page-writeback-use-read_page_state.patch
page-writeback.c: use read_page_state()
vga16fb-fix-bogus-mem_start-value.patch
vga16fb.c: fix bogus mem_start value
pcmcia-enable-read-prefetch-on-o2micro-bridges-to-fix-hdsp.patch
pcmcia: enable read prefetch on o2micro bridges to fix HDSP
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_KERNEL_IMAGE_BZIMAGE=y
# CONFIG_KERNEL_IMAGE_ZIMAGE is not set
# CONFIG_KERNEL_IMAGE_VMLINUX is not set
CONFIG_KERNEL_IMAGE="arch/i386/boot/bzImage"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
# CONFIG_M68K_TOOLCHAIN is not set
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=32
# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_ASUS=y
CONFIG_ACPI_TOSHIBA=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_USE_VECTOR is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_YENTA is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
CONFIG_DEBUG_DRIVER=y
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_CMDLINE_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
# CONFIG_INFTL is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_PDC202XX_FORCE is not set
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_TOS is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=y
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_VIRTUAL=m
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_SA1100 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_SLAB=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_SPINLINE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_LOCKMETER is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_KGDB is not set
CONFIG_FRAME_POINTER=y
# CONFIG_4KSTACKS is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
# CONFIG_SECURITY_SELINUX_MLS is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y
On Wed, 9 Jun 2004, Eric BEGOT wrote:
> I've installed 2.6.7-rc3-mm1 patch on my x86 and during the boot it
> freezes. The last messages are :
>
> CPU0: AMD Athlon(tm) XP 2400+ stepping 01
> per-CPU timeslice cutoff : 731,38 usecs
> task migration cache decay timeout : 1 msecs.
> enabled ExtINT on CPU#0
> ESR value before enabling vector : 00000000
> ESR value after enabling vector : 00000000
> Booting processor 1/15 eip 3000
Try backing out this patch first;
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc3/2.6.7-rc3-mm1/broken-out/apic-enumeration-fixes.patch
The other suspect would be the cpumask patch, but that may be a bit
harder to backout.
Zwane
On Wed, 9 Jun 2004, Eric BEGOT wrote:
>> I've installed 2.6.7-rc3-mm1 patch on my x86 and during the boot it
>> freezes. The last messages are :
>> CPU0: AMD Athlon(tm) XP 2400+ stepping 01
>> per-CPU timeslice cutoff : 731,38 usecs
>> task migration cache decay timeout : 1 msecs.
>> enabled ExtINT on CPU#0
>> ESR value before enabling vector : 00000000
>> ESR value after enabling vector : 00000000
>> Booting processor 1/15 eip 3000
On Wed, Jun 09, 2004 at 09:13:03AM -0400, Zwane Mwaikambo wrote:
> Try backing out this patch first;
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc3/2.6.7-rc3-mm1/broken-out/apic-enumeration-fixes.patch
> The other suspect would be the cpumask patch, but that may be a bit
> harder to backout.
As curious as I am as to whether that works, I'm also curious as to
whether it's the culprit in this case. Eric, could you also describe your
system? A dmesg from a working kernel would also help.
-- wli
On Wed, 9 Jun 2004, William Lee Irwin III wrote:
> On Wed, 9 Jun 2004, Eric BEGOT wrote:
> >> I've installed 2.6.7-rc3-mm1 patch on my x86 and during the boot it
> >> freezes. The last messages are :
> >> CPU0: AMD Athlon(tm) XP 2400+ stepping 01
> >> per-CPU timeslice cutoff : 731,38 usecs
> >> task migration cache decay timeout : 1 msecs.
> >> enabled ExtINT on CPU#0
> >> ESR value before enabling vector : 00000000
> >> ESR value after enabling vector : 00000000
> >> Booting processor 1/15 eip 3000
>
> On Wed, Jun 09, 2004 at 09:13:03AM -0400, Zwane Mwaikambo wrote:
> > Try backing out this patch first;
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc3/2.6.7-rc3-mm1/broken-out/apic-enumeration-fixes.patch
> > The other suspect would be the cpumask patch, but that may be a bit
> > harder to backout.
>
> As curious as I am as to whether that works, I'm also curious as to
> whether it's the culprit in this case. Eric, could you also describe your
> system? A dmesg from a working kernel would also help.
I'm leaning more towards the cpumask stuff but at least eliminating your
patch being a culprit gets us further.
Zwane
On Wed, Jun 09, 2004 at 06:36:53AM -0700, William Lee Irwin III wrote:
> As curious as I am as to whether that works, I'm also curious as to
> whether it's the culprit in this case. Eric, could you also describe your
> system? A dmesg from a working kernel would also help.
Also, this patch never went across lkml. Here is a public post, for
open review's and completeness' sake.
-- wli
From: William Lee Irwin III <[email protected]>
The following patch appears sound according to an audit to ensure that all
of the codepaths where it was introduced were called after the APIC
fixmappings were set up.
This patch introduces get_physical_broadcast(), which checks the version ID
of the local APIC to determine whether it's a serial APIC or xAPIC, and
returns the correct physical broadcast ID. It replaces all uses of
APIC_BROADCAST_ID and IO_APIC_MAX_ID with this in order to ensure. It also
changes the checks during MP table parsing so the APIC ID is checked in
tandem with the version number.
I'm holding out for some kind of testing to get an idea of whether this
covers the cases or introduces regressions, or whatever.
Signed-off-by: Andrew Morton <[email protected]>
---
25-akpm/arch/i386/kernel/io_apic.c | 27 +++++++++++-----
25-akpm/arch/i386/kernel/mpparse.c | 32 ++++++++++++++++++--
25-akpm/arch/i386/mach-visws/mpparse.c | 12 ++++++-
25-akpm/include/asm-i386/genapic.h | 2 -
25-akpm/include/asm-i386/mach-bigsmp/mach_apic.h | 1
25-akpm/include/asm-i386/mach-bigsmp/mach_mpspec.h | 5 ---
25-akpm/include/asm-i386/mach-default/mach_apic.h | 6 ---
25-akpm/include/asm-i386/mach-default/mach_mpspec.h | 5 ---
25-akpm/include/asm-i386/mach-es7000/mach_apic.h | 1
25-akpm/include/asm-i386/mach-es7000/mach_mpspec.h | 5 ---
25-akpm/include/asm-i386/mach-generic/mach_apic.h | 1
25-akpm/include/asm-i386/mach-generic/mach_mpspec.h | 5 ---
25-akpm/include/asm-i386/mach-numaq/mach_apic.h | 1
25-akpm/include/asm-i386/mach-numaq/mach_mpspec.h | 5 ---
25-akpm/include/asm-i386/mach-summit/mach_apic.h | 1
25-akpm/include/asm-i386/mach-summit/mach_mpspec.h | 5 ---
25-akpm/include/asm-i386/mach-visws/mach_apic.h | 1
25-akpm/include/asm-i386/mpspec_def.h | 1
18 files changed, 59 insertions(+), 57 deletions(-)
diff -puN arch/i386/kernel/io_apic.c~apic-enumeration-fixes arch/i386/kernel/io_apic.c
--- 25/arch/i386/kernel/io_apic.c~apic-enumeration-fixes 2004-06-04 01:40:58.080435800 -0700
+++ 25-akpm/arch/i386/kernel/io_apic.c 2004-06-04 01:40:58.237411936 -0700
@@ -722,6 +722,17 @@ static int __init ioapic_pirq_setup(char
__setup("pirq=", ioapic_pirq_setup);
+static int get_physical_broadcast(void)
+{
+ unsigned int lvr, version;
+ lvr = apic_read(APIC_LVR);
+ version = GET_APIC_VERSION(lvr);
+ if (version >= 0x14)
+ return 0xff;
+ else
+ return 0xf;
+}
+
/*
* Find the IRQ entry number of a certain pin.
*/
@@ -1326,7 +1337,7 @@ void __init print_IO_APIC(void)
printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type);
printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS);
- if (reg_00.bits.ID >= APIC_BROADCAST_ID)
+ if (reg_00.bits.ID >= get_physical_broadcast())
UNEXPECTED_IO_APIC();
if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2)
UNEXPECTED_IO_APIC();
@@ -1647,7 +1658,7 @@ static void __init setup_ioapic_ids_from
old_id = mp_ioapics[apic].mpc_apicid;
- if (mp_ioapics[apic].mpc_apicid >= APIC_BROADCAST_ID) {
+ if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) {
printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
apic, mp_ioapics[apic].mpc_apicid);
printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
@@ -1668,10 +1679,10 @@ static void __init setup_ioapic_ids_from
mp_ioapics[apic].mpc_apicid)) {
printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
apic, mp_ioapics[apic].mpc_apicid);
- for (i = 0; i < APIC_BROADCAST_ID; i++)
+ for (i = 0; i < get_physical_broadcast(); i++)
if (!physid_isset(i, phys_id_present_map))
break;
- if (i >= APIC_BROADCAST_ID)
+ if (i >= get_physical_broadcast())
panic("Max APIC ID exceeded!\n");
printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
i);
@@ -2268,8 +2279,6 @@ late_initcall(io_apic_bug_finalize);
#ifdef CONFIG_ACPI_BOOT
-#define IO_APIC_MAX_ID APIC_BROADCAST_ID
-
int __init io_apic_get_unique_id (int ioapic, int apic_id)
{
union IO_APIC_reg_00 reg_00;
@@ -2294,7 +2303,7 @@ int __init io_apic_get_unique_id (int io
reg_00.raw = io_apic_read(ioapic, 0);
spin_unlock_irqrestore(&ioapic_lock, flags);
- if (apic_id >= IO_APIC_MAX_ID) {
+ if (apic_id >= get_physical_broadcast()) {
printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
"%d\n", ioapic, apic_id, reg_00.bits.ID);
apic_id = reg_00.bits.ID;
@@ -2306,12 +2315,12 @@ int __init io_apic_get_unique_id (int io
*/
if (check_apicid_used(apic_id_map, apic_id)) {
- for (i = 0; i < IO_APIC_MAX_ID; i++) {
+ for (i = 0; i < get_physical_broadcast(); i++) {
if (!check_apicid_used(apic_id_map, i))
break;
}
- if (i == IO_APIC_MAX_ID)
+ if (i == get_physical_broadcast())
panic("Max apic_id exceeded!\n");
printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
diff -puN arch/i386/kernel/mpparse.c~apic-enumeration-fixes arch/i386/kernel/mpparse.c
--- 25/arch/i386/kernel/mpparse.c~apic-enumeration-fixes 2004-06-04 01:40:58.082435496 -0700
+++ 25-akpm/arch/i386/kernel/mpparse.c 2004-06-04 01:40:58.238411784 -0700
@@ -23,6 +23,7 @@
#include <linux/smp_lock.h>
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
+#include <linux/bitops.h>
#include <asm/smp.h>
#include <asm/acpi.h>
@@ -103,6 +104,31 @@ static int __init mpf_checksum(unsigned
static int mpc_record;
static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __initdata;
+#ifdef CONFIG_X86_NUMAQ
+static int MP_valid_apicid(int apicid, int version)
+{
+ return hweight_long(i & 0xf) == 1 && (i >> 4) != 0xf;
+}
+#else
+static int MP_valid_apicid(int apicid, int version)
+{
+ if (version >= 0x14)
+ return apicid < 0xff;
+ else
+ return apicid < 0xf;
+}
+#endif
+
+static void MP_mark_version_physids(int version)
+{
+ int i;
+
+ for (i = 0; i < MAX_APICS; ++i) {
+ if (!MP_valid_apicid(i, version))
+ physid_set(i, phys_cpu_present_map);
+ }
+}
+
void __init MP_processor_info (struct mpc_config_processor *m)
{
int ver, apicid;
@@ -179,14 +205,16 @@ void __init MP_processor_info (struct mp
return;
}
num_processors++;
+ ver = m->mpc_apicver;
- if (MAX_APICS - m->mpc_apicid <= 0) {
+ if (MP_valid_apicid(m->mpc_apicid, ver))
+ MP_mark_version_physids(ver);
+ else {
printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n",
m->mpc_apicid, MAX_APICS);
--num_processors;
return;
}
- ver = m->mpc_apicver;
tmp = apicid_to_cpu_present(apicid);
physids_or(phys_cpu_present_map, phys_cpu_present_map, tmp);
diff -puN arch/i386/mach-visws/mpparse.c~apic-enumeration-fixes arch/i386/mach-visws/mpparse.c
--- 25/arch/i386/mach-visws/mpparse.c~apic-enumeration-fixes 2004-06-04 01:40:58.089434432 -0700
+++ 25-akpm/arch/i386/mach-visws/mpparse.c 2004-06-04 01:40:58.239411632 -0700
@@ -57,12 +57,12 @@ void __init MP_processor_info (struct mp
boot_cpu_logical_apicid = logical_apicid;
}
- if (m->mpc_apicid > MAX_APICS) {
+ ver = m->mpc_apicver;
+ if ((ver >= 0x14 && m->mpc_apicid >= 0xff) || m->mpc_apicid >= 0xf) {
printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
m->mpc_apicid, MAX_APICS);
return;
}
- ver = m->mpc_apicver;
apic_cpus = apicid_to_cpu_present(m->mpc_apicid);
physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
@@ -75,6 +75,14 @@ void __init MP_processor_info (struct mp
m->mpc_apicid);
ver = 0x10;
}
+ if (ver >= 0x14)
+ physid_set(0xff, phys_cpu_present_map);
+ else {
+ int i;
+
+ for (i = 0xf; i < MAX_APICS; ++i)
+ physid_set(i, phys_cpu_present_map);
+ }
apic_version[m->mpc_apicid] = ver;
}
diff -puN include/asm-i386/genapic.h~apic-enumeration-fixes include/asm-i386/genapic.h
--- 25/include/asm-i386/genapic.h~apic-enumeration-fixes 2004-06-04 01:40:58.093433824 -0700
+++ 25-akpm/include/asm-i386/genapic.h 2004-06-04 01:40:58.240411480 -0700
@@ -25,7 +25,6 @@ struct genapic {
cpumask_t (*target_cpus)(void);
int int_delivery_mode;
int int_dest_mode;
- int apic_broadcast_id;
int ESR_DISABLE;
int apic_destination_logical;
unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
@@ -78,7 +77,6 @@ struct genapic {
.probe = aprobe, \
.int_delivery_mode = INT_DELIVERY_MODE, \
.int_dest_mode = INT_DEST_MODE, \
- .apic_broadcast_id = APIC_BROADCAST_ID, \
.no_balance_irq = NO_BALANCE_IRQ, \
.no_ioapic_check = NO_IOAPIC_CHECK, \
.ESR_DISABLE = esr_disable, \
diff -puN include/asm-i386/mach-bigsmp/mach_apic.h~apic-enumeration-fixes include/asm-i386/mach-bigsmp/mach_apic.h
--- 25/include/asm-i386/mach-bigsmp/mach_apic.h~apic-enumeration-fixes 2004-06-04 01:40:58.102432456 -0700
+++ 25-akpm/include/asm-i386/mach-bigsmp/mach_apic.h 2004-06-04 01:40:58.241411328 -0700
@@ -39,7 +39,6 @@ static inline cpumask_t target_cpus(void
#define INT_DELIVERY_MODE dest_Fixed
#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */
-#define APIC_BROADCAST_ID (0xff)
static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
{
return 0;
diff -puN include/asm-i386/mach-bigsmp/mach_mpspec.h~apic-enumeration-fixes include/asm-i386/mach-bigsmp/mach_mpspec.h
--- 25/include/asm-i386/mach-bigsmp/mach_mpspec.h~apic-enumeration-fixes 2004-06-04 01:40:58.103432304 -0700
+++ 25-akpm/include/asm-i386/mach-bigsmp/mach_mpspec.h 2004-06-04 01:40:58.243411024 -0700
@@ -1,11 +1,6 @@
#ifndef __ASM_MACH_MPSPEC_H
#define __ASM_MACH_MPSPEC_H
-/*
- * a maximum of 16 APICs with the current APIC ID architecture.
- */
-#define MAX_APICS 16
-
#define MAX_IRQ_SOURCES 256
#define MAX_MP_BUSSES 32
diff -puN include/asm-i386/mach-default/mach_apic.h~apic-enumeration-fixes include/asm-i386/mach-default/mach_apic.h
--- 25/include/asm-i386/mach-default/mach_apic.h~apic-enumeration-fixes 2004-06-04 01:40:58.114430632 -0700
+++ 25-akpm/include/asm-i386/mach-default/mach_apic.h 2004-06-04 01:40:58.244410872 -0700
@@ -23,12 +23,6 @@ static inline cpumask_t target_cpus(void
#define INT_DELIVERY_MODE dest_LowestPrio
#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */
-/*
- * this isn't really broadcast, just a (potentially inaccurate) upper
- * bound for valid physical APIC id's
- */
-#define APIC_BROADCAST_ID 0x0F
-
static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
{
return physid_isset(apicid, bitmap);
diff -puN include/asm-i386/mach-default/mach_mpspec.h~apic-enumeration-fixes include/asm-i386/mach-default/mach_mpspec.h
--- 25/include/asm-i386/mach-default/mach_mpspec.h~apic-enumeration-fixes 2004-06-04 01:40:58.129428352 -0700
+++ 25-akpm/include/asm-i386/mach-default/mach_mpspec.h 2004-06-04 01:40:58.246410568 -0700
@@ -1,11 +1,6 @@
#ifndef __ASM_MACH_MPSPEC_H
#define __ASM_MACH_MPSPEC_H
-/*
- * a maximum of 16 APICs with the current APIC ID architecture.
- */
-#define MAX_APICS 16
-
#define MAX_IRQ_SOURCES 256
#define MAX_MP_BUSSES 32
diff -puN include/asm-i386/mach-es7000/mach_apic.h~apic-enumeration-fixes include/asm-i386/mach-es7000/mach_apic.h
--- 25/include/asm-i386/mach-es7000/mach_apic.h~apic-enumeration-fixes 2004-06-04 01:40:58.148425464 -0700
+++ 25-akpm/include/asm-i386/mach-es7000/mach_apic.h 2004-06-04 01:40:58.247410416 -0700
@@ -38,7 +38,6 @@ static inline cpumask_t target_cpus(void
#define WAKE_SECONDARY_VIA_INIT
#endif
-#define APIC_BROADCAST_ID (0xff)
#define NO_IOAPIC_CHECK (1)
static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
diff -puN include/asm-i386/mach-es7000/mach_mpspec.h~apic-enumeration-fixes include/asm-i386/mach-es7000/mach_mpspec.h
--- 25/include/asm-i386/mach-es7000/mach_mpspec.h~apic-enumeration-fixes 2004-06-04 01:40:58.149425312 -0700
+++ 25-akpm/include/asm-i386/mach-es7000/mach_mpspec.h 2004-06-04 01:40:58.249410112 -0700
@@ -1,11 +1,6 @@
#ifndef __ASM_MACH_MPSPEC_H
#define __ASM_MACH_MPSPEC_H
-/*
- * a maximum of 256 APICs with the current APIC ID architecture.
- */
-#define MAX_APICS 256
-
#define MAX_IRQ_SOURCES 256
#define MAX_MP_BUSSES 32
diff -puN include/asm-i386/mach-generic/mach_apic.h~apic-enumeration-fixes include/asm-i386/mach-generic/mach_apic.h
--- 25/include/asm-i386/mach-generic/mach_apic.h~apic-enumeration-fixes 2004-06-04 01:40:58.156424248 -0700
+++ 25-akpm/include/asm-i386/mach-generic/mach_apic.h 2004-06-04 01:40:58.250409960 -0700
@@ -6,7 +6,6 @@
#define esr_disable (genapic->ESR_DISABLE)
#define NO_BALANCE_IRQ (genapic->no_balance_irq)
#define NO_IOAPIC_CHECK (genapic->no_ioapic_check)
-#define APIC_BROADCAST_ID (genapic->apic_broadcast_id)
#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
#define INT_DEST_MODE (genapic->int_dest_mode)
#undef APIC_DEST_LOGICAL
diff -puN include/asm-i386/mach-generic/mach_mpspec.h~apic-enumeration-fixes include/asm-i386/mach-generic/mach_mpspec.h
--- 25/include/asm-i386/mach-generic/mach_mpspec.h~apic-enumeration-fixes 2004-06-04 01:40:58.163423184 -0700
+++ 25-akpm/include/asm-i386/mach-generic/mach_mpspec.h 2004-06-04 01:40:58.252409656 -0700
@@ -1,11 +1,6 @@
#ifndef __ASM_MACH_MPSPEC_H
#define __ASM_MACH_MPSPEC_H
-/*
- * a maximum of 256 APICs with the current APIC ID architecture.
- */
-#define MAX_APICS 256
-
#define MAX_IRQ_SOURCES 256
/* Summit or generic (i.e. installer) kernels need lots of bus entries. */
diff -puN include/asm-i386/mach-numaq/mach_apic.h~apic-enumeration-fixes include/asm-i386/mach-numaq/mach_apic.h
--- 25/include/asm-i386/mach-numaq/mach_apic.h~apic-enumeration-fixes 2004-06-04 01:40:58.165422880 -0700
+++ 25-akpm/include/asm-i386/mach-numaq/mach_apic.h 2004-06-04 01:40:58.254409352 -0700
@@ -21,7 +21,6 @@ static inline cpumask_t target_cpus(void
#define INT_DELIVERY_MODE dest_LowestPrio
#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */
-#define APIC_BROADCAST_ID 0x0F
#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
#define apicid_cluster(apicid) (apicid & 0xF0)
diff -puN include/asm-i386/mach-numaq/mach_mpspec.h~apic-enumeration-fixes include/asm-i386/mach-numaq/mach_mpspec.h
--- 25/include/asm-i386/mach-numaq/mach_mpspec.h~apic-enumeration-fixes 2004-06-04 01:40:58.172421816 -0700
+++ 25-akpm/include/asm-i386/mach-numaq/mach_mpspec.h 2004-06-04 01:40:58.255409200 -0700
@@ -1,11 +1,6 @@
#ifndef __ASM_MACH_MPSPEC_H
#define __ASM_MACH_MPSPEC_H
-/*
- * a maximum of 256 APICs with the current APIC ID architecture.
- */
-#define MAX_APICS 256
-
#define MAX_IRQ_SOURCES 512
#define MAX_MP_BUSSES 32
diff -puN include/asm-i386/mach-summit/mach_apic.h~apic-enumeration-fixes include/asm-i386/mach-summit/mach_apic.h
--- 25/include/asm-i386/mach-summit/mach_apic.h~apic-enumeration-fixes 2004-06-04 01:40:58.187419536 -0700
+++ 25-akpm/include/asm-i386/mach-summit/mach_apic.h 2004-06-04 01:40:58.257408896 -0700
@@ -26,7 +26,6 @@ static inline cpumask_t target_cpus(void
#define INT_DELIVERY_MODE (dest_Fixed)
#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */
-#define APIC_BROADCAST_ID (0xFF)
static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
{
return 0;
diff -puN include/asm-i386/mach-summit/mach_mpspec.h~apic-enumeration-fixes include/asm-i386/mach-summit/mach_mpspec.h
--- 25/include/asm-i386/mach-summit/mach_mpspec.h~apic-enumeration-fixes 2004-06-04 01:40:58.188419384 -0700
+++ 25-akpm/include/asm-i386/mach-summit/mach_mpspec.h 2004-06-04 01:40:58.258408744 -0700
@@ -1,11 +1,6 @@
#ifndef __ASM_MACH_MPSPEC_H
#define __ASM_MACH_MPSPEC_H
-/*
- * a maximum of 256 APICs with the current APIC ID architecture.
- */
-#define MAX_APICS 256
-
#define MAX_IRQ_SOURCES 256
/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */
diff -puN include/asm-i386/mach-visws/mach_apic.h~apic-enumeration-fixes include/asm-i386/mach-visws/mach_apic.h
--- 25/include/asm-i386/mach-visws/mach_apic.h~apic-enumeration-fixes 2004-06-04 01:40:58.202417256 -0700
+++ 25-akpm/include/asm-i386/mach-visws/mach_apic.h 2004-06-04 01:40:58.260408440 -0700
@@ -19,7 +19,6 @@
#define TARGET_CPUS cpumask_of_cpu(0)
#endif
-#define APIC_BROADCAST_ID 0x0F
#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
diff -puN include/asm-i386/mpspec_def.h~apic-enumeration-fixes include/asm-i386/mpspec_def.h
--- 25/include/asm-i386/mpspec_def.h~apic-enumeration-fixes 2004-06-04 01:40:58.219414672 -0700
+++ 25-akpm/include/asm-i386/mpspec_def.h 2004-06-04 01:40:58.261408288 -0700
@@ -14,6 +14,7 @@
#define SMP_MAGIC_IDENT (('_'<<24)|('P'<<16)|('M'<<8)|'_')
#define MAX_MPC_ENTRY 1024
+#define MAX_APICS 256
struct intel_mp_floating
{
_
On Wed, 9 Jun 2004, William Lee Irwin III wrote:
>> As curious as I am as to whether that works, I'm also curious as to
>> whether it's the culprit in this case. Eric, could you also describe your
>> system? A dmesg from a working kernel would also help.
On Wed, Jun 09, 2004 at 09:43:58AM -0400, Zwane Mwaikambo wrote:
> I'm leaning more towards the cpumask stuff but at least eliminating your
> patch being a culprit gets us further.
> Zwane
A moment's reflection renders this obvious. phys_cpu_present_map needs
to be doublechecked for the invalid physical APIC ID's in
cpu_present_to_apicid() prior to waking cpus since I'm marking invalid
physical APIC ID's as present to drive the IO-APIC physical APIC ID
validity detection and cpuid validity + detection logic. Something like
this should help a bit.
I'm questioning whether the marking scheme is worth anything and if I
should just rely on bounds-checking against the dynamically-detected
physical APIC ID instead.
(a) attempt to fix zwane's numaq; m->mpc_apicid is wrong to look at.
(b) compilefix for CONFIG_ACPI_BOOT from zwane
(c) check physid's
Totally untested (compiletesting in progress).
-- wli
Index: mm1-2.6.7-rc3/arch/i386/kernel/mpparse.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/i386/kernel/mpparse.c 2004-06-09 07:11:51.335601000 -0700
+++ mm1-2.6.7-rc3/arch/i386/kernel/mpparse.c 2004-06-09 07:42:04.221000000 -0700
@@ -107,7 +107,7 @@
#ifdef CONFIG_X86_NUMAQ
static int MP_valid_apicid(int apicid, int version)
{
- return hweight_long(i & 0xf) == 1 && (i >> 4) != 0xf;
+ return hweight_long(apicid & 0xf) == 1 && (apicid >> 4) != 0xf;
}
#else
static int MP_valid_apicid(int apicid, int version)
@@ -207,7 +207,7 @@
num_processors++;
ver = m->mpc_apicver;
- if (MP_valid_apicid(m->mpc_apicid, ver))
+ if (MP_valid_apicid(apicid, ver))
MP_mark_version_physids(ver);
else {
printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n",
@@ -871,7 +871,7 @@
MP_processor_info(&processor);
}
-#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT))
#define MP_ISA_BUS 0
#define MP_MAX_IOAPIC_PIN 127
@@ -1103,5 +1103,5 @@
active_high_low == ACPI_ACTIVE_HIGH ? 0 : 1);
}
-#endif /*CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER*/
+#endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/
#endif /*CONFIG_ACPI_BOOT*/
Index: mm1-2.6.7-rc3/arch/i386/kernel/io_apic.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/i386/kernel/io_apic.c 2004-06-09 07:11:51.323603000 -0700
+++ mm1-2.6.7-rc3/arch/i386/kernel/io_apic.c 2004-06-09 07:30:06.936044000 -0700
@@ -722,7 +722,7 @@
__setup("pirq=", ioapic_pirq_setup);
-static int get_physical_broadcast(void)
+int get_physical_broadcast(void)
{
unsigned int lvr, version;
lvr = apic_read(APIC_LVR);
Index: mm1-2.6.7-rc3/include/asm-i386/mach-default/mach_apic.h
===================================================================
--- mm1-2.6.7-rc3.orig/include/asm-i386/mach-default/mach_apic.h 2004-06-09 07:11:51.513574000 -0700
+++ mm1-2.6.7-rc3/include/asm-i386/mach-default/mach_apic.h 2004-06-09 07:42:51.696783000 -0700
@@ -79,7 +79,10 @@
static inline int cpu_present_to_apicid(int mps_cpu)
{
- return mps_cpu;
+ if (mps_cpu < get_physical_broadcast())
+ return mps_cpu;
+ else
+ return BAD_APICID;
}
static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
Index: mm1-2.6.7-rc3/include/asm-i386/mach-visws/mach_apic.h
===================================================================
--- mm1-2.6.7-rc3.orig/include/asm-i386/mach-visws/mach_apic.h 2004-06-09 07:11:51.635555000 -0700
+++ mm1-2.6.7-rc3/include/asm-i386/mach-visws/mach_apic.h 2004-06-09 07:29:30.131639000 -0700
@@ -60,7 +60,10 @@
static inline int cpu_present_to_apicid(int mps_cpu)
{
- return mps_cpu;
+ if (mps_cpu < get_physical_broadcast())
+ return mps_cpu;
+ else
+ return BAD_APICID;
}
static inline physid_mask_t apicid_to_cpu_present(int apicid)
Index: mm1-2.6.7-rc3/include/asm-i386/apic.h
===================================================================
--- mm1-2.6.7-rc3.orig/include/asm-i386/apic.h 2004-06-07 12:15:12.000000000 -0700
+++ mm1-2.6.7-rc3/include/asm-i386/apic.h 2004-06-09 07:29:54.104995000 -0700
@@ -41,6 +41,8 @@
do { } while ( apic_read( APIC_ICR ) & APIC_ICR_BUSY );
}
+int get_physical_broadcast(void);
+
#ifdef CONFIG_X86_GOOD_APIC
# define FORCE_READ_AROUND_WRITE 0
# define apic_read_around(x)
On Wed, Jun 09, 2004 at 07:48:09AM -0700, William Lee Irwin III wrote:
> I'm questioning whether the marking scheme is worth anything and if I
> should just rely on bounds-checking against the dynamically-detected
> physical APIC ID instead.
Actually I think blowing it away immediately is best. Bounds checks
don't work for everything.
-- wli
Index: mm1-2.6.7-rc3/arch/i386/kernel/mpparse.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/i386/kernel/mpparse.c 2004-06-09 07:42:04.221000000 -0700
+++ mm1-2.6.7-rc3/arch/i386/kernel/mpparse.c 2004-06-09 07:54:51.703325000 -0700
@@ -119,16 +119,6 @@
}
#endif
-static void MP_mark_version_physids(int version)
-{
- int i;
-
- for (i = 0; i < MAX_APICS; ++i) {
- if (!MP_valid_apicid(i, version))
- physid_set(i, phys_cpu_present_map);
- }
-}
-
void __init MP_processor_info (struct mpc_config_processor *m)
{
int ver, apicid;
@@ -207,9 +197,7 @@
num_processors++;
ver = m->mpc_apicver;
- if (MP_valid_apicid(apicid, ver))
- MP_mark_version_physids(ver);
- else {
+ if (!MP_valid_apicid(apicid, ver)) {
printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n",
m->mpc_apicid, MAX_APICS);
--num_processors;
Index: mm1-2.6.7-rc3/arch/i386/mach-visws/mpparse.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/i386/mach-visws/mpparse.c 2004-06-09 07:11:51.380594000 -0700
+++ mm1-2.6.7-rc3/arch/i386/mach-visws/mpparse.c 2004-06-09 07:57:04.521134000 -0700
@@ -75,14 +75,6 @@
m->mpc_apicid);
ver = 0x10;
}
- if (ver >= 0x14)
- physid_set(0xff, phys_cpu_present_map);
- else {
- int i;
-
- for (i = 0xf; i < MAX_APICS; ++i)
- physid_set(i, phys_cpu_present_map);
- }
apic_version[m->mpc_apicid] = ver;
}
On Wed, Jun 09, 2004 at 07:58:49AM -0700, William Lee Irwin III wrote:
> Actually I think blowing it away immediately is best. Bounds checks
> don't work for everything.
(a) fix mach-default compile due to missing definition of BAD_APICID
(b) fix UP APIC sans IO-APIC link failure
Index: mm1-2.6.7-rc3/include/asm-i386/mach-default/mach_apic.h
===================================================================
--- mm1-2.6.7-rc3.orig/include/asm-i386/mach-default/mach_apic.h 2004-06-09 08:08:00.000000000 -0700
+++ mm1-2.6.7-rc3/include/asm-i386/mach-default/mach_apic.h 2004-06-09 08:10:17.000000000 -0700
@@ -2,6 +2,7 @@
#define __ASM_MACH_APIC_H
#include <mach_apicdef.h>
+#include <asm/smp.h>
#define APIC_DFR_VALUE (APIC_DFR_FLAT)
Index: mm1-2.6.7-rc3/arch/i386/kernel/io_apic.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/i386/kernel/io_apic.c 2004-06-09 08:08:00.000000000 -0700
+++ mm1-2.6.7-rc3/arch/i386/kernel/io_apic.c 2004-06-09 08:13:05.000000000 -0700
@@ -722,17 +722,6 @@
__setup("pirq=", ioapic_pirq_setup);
-int get_physical_broadcast(void)
-{
- unsigned int lvr, version;
- lvr = apic_read(APIC_LVR);
- version = GET_APIC_VERSION(lvr);
- if (version >= 0x14)
- return 0xff;
- else
- return 0xf;
-}
-
/*
* Find the IRQ entry number of a certain pin.
*/
Index: mm1-2.6.7-rc3/arch/i386/kernel/apic.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/i386/kernel/apic.c 2004-06-09 08:06:44.000000000 -0700
+++ mm1-2.6.7-rc3/arch/i386/kernel/apic.c 2004-06-09 08:13:27.000000000 -0700
@@ -80,6 +80,17 @@
apic_write_around(APIC_LVT0, v);
}
+int get_physical_broadcast(void)
+{
+ unsigned int lvr, version;
+ lvr = apic_read(APIC_LVR);
+ version = GET_APIC_VERSION(lvr);
+ if (version >= 0x14)
+ return 0xff;
+ else
+ return 0xf;
+}
+
int get_maxlvt(void)
{
unsigned int v, ver, maxlvt;
K8 Numa broken...
LD arch/x86_64/mm/hugetlbpage.o
CC arch/x86_64/mm/numa.o
arch/x86_64/mm/numa.c: In function `numa_initmem_init':
arch/x86_64/mm/numa.c:185: error: incompatible types in assignment
make[1]: *** [arch/x86_64/mm/numa.o] Error 1
Peter
#
# Automatically generated make config: don't edit
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
# CONFIG_M68K_TOOLCHAIN is not set
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_HOTPLUG is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
# CONFIG_SCHED_SMT is not set
CONFIG_K8_NUMA=y
CONFIG_DISCONTIGMEM=y
CONFIG_NUMA=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_NR_CPUS=2
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_USE_VECTOR=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_NOMMAP is not set
CONFIG_HANGCHECK_TIMER=y
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_INIT_DEBUG is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_KGDB is not set
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
# CONFIG_SECURITY_SELINUX_DISABLE is not set
# CONFIG_SECURITY_SELINUX_DEVELOP is not set
# CONFIG_SECURITY_SELINUX_MLS is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
On Wed, Jun 09, 2004 at 10:33:08AM -0500, Peter Maas wrote:
> K8 Numa broken...
>
> LD arch/x86_64/mm/hugetlbpage.o
> CC arch/x86_64/mm/numa.o
> arch/x86_64/mm/numa.c: In function `numa_initmem_init':
> arch/x86_64/mm/numa.c:185: error: incompatible types in assignment
> make[1]: *** [arch/x86_64/mm/numa.o] Error 1
Index: mm1-2.6.7-rc3/arch/x86_64/mm/numa.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/x86_64/mm/numa.c 2004-06-07 12:14:56.000000000 -0700
+++ mm1-2.6.7-rc3/arch/x86_64/mm/numa.c 2004-06-09 08:52:40.000000000 -0700
@@ -182,7 +182,7 @@
numnodes = 1;
for (i = 0; i < NR_CPUS; i++)
cpu_to_node[i] = 0;
- node_to_cpumask[0] = 1;
+ node_to_cpumask[0] = cpumask_of_cpu(0);
setup_node_bootmem(0, start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
}
William Lee Irwin III wrote:
>> Actually I think blowing it away immediately is best. Bounds checks
>> don't work for everything.
On Wed, Jun 09, 2004 at 05:49:44PM +0200, Eric BEGOT wrote:
> Ok I applied the two patches and i works now. I have a 2.6.7-rc3-mm1. I
> attached the two patches.
> Thx william.
Thank you very much for testing and being patient with the programming
errors of mine present in stock 2.6.7-rc3-mm1.
akpm, could you please apply the two fixes I sent Eric?
Thanks.
-- wli
Hello,
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc3/2.6
>.7-rc3-mm1/
CC drivers/pci/msi.o
drivers/pci/msi.c: In function `msi_address_init':
drivers/pci/msi.c:265: error: invalid operands to binary <<
make[2]: *** [drivers/pci/msi.o] Error 1
make[1]: *** [drivers/pci] Error 2
make: *** [drivers] Error 2
The offending line is:
msi_address->lo_address.value |= (MSI_TARGET_CPU << MSI_TARGET_CPU_SHIFT);
$ gcc --version
gcc (GCC) 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Regards,
Norberto
On Wed, Jun 09, 2004 at 01:35:15PM -0300, Norberto Bensa wrote:
> CC drivers/pci/msi.o
> drivers/pci/msi.c: In function `msi_address_init':
> drivers/pci/msi.c:265: error: invalid operands to binary <<
> make[2]: *** [drivers/pci/msi.o] Error 1
> make[1]: *** [drivers/pci] Error 2
> make: *** [drivers] Error 2
> The offending line is:
>
> msi_address->lo_address.value |= (MSI_TARGET_CPU << MSI_TARGET_CPU_SHIFT);
The MSI writers have a lot to answer for. Could you test this?
Thanks.
Index: mm1-2.6.7-rc3/drivers/pci/msi.c
===================================================================
--- mm1-2.6.7-rc3.orig/drivers/pci/msi.c 2004-06-07 12:14:59.000000000 -0700
+++ mm1-2.6.7-rc3/drivers/pci/msi.c 2004-06-09 10:04:21.000000000 -0700
@@ -254,7 +254,8 @@
static void msi_address_init(struct msg_address *msi_address)
{
- unsigned int dest_id;
+ unsigned int dest_id;
+ cpumask_t msi_target_cpu = MSI_TARGET_CPU;
memset(msi_address, 0, sizeof(struct msg_address));
msi_address->hi_address = (u32)0;
@@ -262,7 +263,7 @@
msi_address->lo_address.u.dest_mode = MSI_DEST_MODE;
msi_address->lo_address.u.redirection_hint = MSI_REDIRECTION_HINT_MODE;
msi_address->lo_address.u.dest_id = dest_id;
- msi_address->lo_address.value |= (MSI_TARGET_CPU << MSI_TARGET_CPU_SHIFT);
+ msi_address->lo_address.value |= any_online_cpu(msi_target_cpu) << MSI_TARGET_CPU_SHIFT;
}
static int assign_msi_vector(void)
Index: mm1-2.6.7-rc3/include/asm-i386/msi.h
===================================================================
--- mm1-2.6.7-rc3.orig/include/asm-i386/msi.h 2004-06-07 12:14:42.000000000 -0700
+++ mm1-2.6.7-rc3/include/asm-i386/msi.h 2004-06-09 09:50:04.000000000 -0700
@@ -14,7 +14,7 @@
#define MSI_TARGET_CPU_SHIFT 12
#ifdef CONFIG_SMP
-#define MSI_TARGET_CPU logical_smp_processor_id()
+#define MSI_TARGET_CPU cpumask_of_cpu(logical_smp_processor_id())
#else
#define MSI_TARGET_CPU TARGET_CPUS
#endif
William Lee Irwin III wrote:
> On Wed, Jun 09, 2004 at 01:35:15PM -0300, Norberto Bensa wrote:
> > drivers/pci/msi.c: In function `msi_address_init':
> > drivers/pci/msi.c:265: error: invalid operands to binary <<
> > make[2]: *** [drivers/pci/msi.o] Error 1
> > make[1]: *** [drivers/pci] Error 2
> > make: *** [drivers] Error 2
>
> The MSI writers have a lot to answer for. Could you test this?
>
I will tonight (8 hours from now.)
Thanks,
Norberto
On Wed, Jun 09, 2004 at 01:50:01AM -0700, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc3/2.6.7-rc3-mm1/
> - Included the dreaded cpumask rework.
> - Lots of little fixes.
> - Added support for the NX (no execute) pagetable flag on ia32.
Last time I tested this on sparc64 (the only current user of ->mask) it
appeared to work. The following patch makes irqaction's ->mask a cpumask
as it was intended to be and wraps up the rest of the sweep. Only struct
irqaction is usefully greppable, so there may be some assignments to
->mask missing still. This removes more code than it adds.
Compiletested i386 and sparc64, runtime tested on sparc64 in a prior
incarnation. vs. 2.6.7-rc3-mm1
-- wli
Index: mm1-2.6.7-rc3/include/linux/interrupt.h
===================================================================
--- mm1-2.6.7-rc3.orig/include/linux/interrupt.h 2004-06-07 12:14:25.000000000 -0700
+++ mm1-2.6.7-rc3/include/linux/interrupt.h 2004-06-09 10:40:12.684107000 -0700
@@ -7,6 +7,7 @@
#include <linux/linkage.h>
#include <linux/bitops.h>
#include <linux/preempt.h>
+#include <linux/cpumask.h>
#include <asm/atomic.h>
#include <asm/hardirq.h>
#include <asm/ptrace.h>
@@ -35,7 +36,7 @@
struct irqaction {
irqreturn_t (*handler)(int, void *, struct pt_regs *);
unsigned long flags;
- unsigned long mask;
+ cpumask_t mask;
const char *name;
void *dev_id;
struct irqaction *next;
Index: mm1-2.6.7-rc3/include/linux/cpumask.h
===================================================================
--- mm1-2.6.7-rc3.orig/include/linux/cpumask.h 2004-06-09 07:11:49.439889000 -0700
+++ mm1-2.6.7-rc3/include/linux/cpumask.h 2004-06-09 10:44:34.137360000 -0700
@@ -248,9 +248,9 @@
#endif
#define CPU_MASK_NONE \
-{ { \
+((cpumask_t){ { \
[0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \
-} }
+} })
#define cpus_addr(src) ((src).bits)
Index: mm1-2.6.7-rc3/arch/ppc/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/ppc/kernel/irq.c 2004-06-07 12:14:56.000000000 -0700
+++ mm1-2.6.7-rc3/arch/ppc/kernel/irq.c 2004-06-09 10:40:12.760095000 -0700
@@ -241,7 +241,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->dev_id = dev_id;
action->next = NULL;
Index: mm1-2.6.7-rc3/arch/alpha/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/alpha/kernel/irq.c 2004-06-07 12:14:56.000000000 -0700
+++ mm1-2.6.7-rc3/arch/alpha/kernel/irq.c 2004-06-09 10:40:12.844083000 -0700
@@ -457,7 +457,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/arm/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/arm/kernel/irq.c 2004-06-07 12:13:34.000000000 -0700
+++ mm1-2.6.7-rc3/arch/arm/kernel/irq.c 2004-06-09 10:40:12.895075000 -0700
@@ -674,7 +674,7 @@
action->handler = handler;
action->flags = irq_flags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/arm/mach-clps7500/core.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/arm/mach-clps7500/core.c 2004-06-07 12:14:33.000000000 -0700
+++ mm1-2.6.7-rc3/arch/arm/mach-clps7500/core.c 2004-06-09 10:40:12.944067000 -0700
@@ -187,7 +187,7 @@
.unmask = cl7500_no_action,
};
-static struct irqaction irq_isa = { no_action, 0, 0, "isa", NULL, NULL };
+static struct irqaction irq_isa = { no_action, 0, CPU_MASK_NONE, "isa", NULL, NULL };
static void __init clps7500_init_irq(void)
{
Index: mm1-2.6.7-rc3/arch/arm26/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/arm26/kernel/irq.c 2004-06-07 12:14:58.000000000 -0700
+++ mm1-2.6.7-rc3/arch/arm26/kernel/irq.c 2004-06-09 10:40:13.024055000 -0700
@@ -549,7 +549,7 @@
action->handler = handler;
action->flags = irq_flags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/cris/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/cris/kernel/irq.c 2004-06-07 12:15:12.000000000 -0700
+++ mm1-2.6.7-rc3/arch/cris/kernel/irq.c 2004-06-09 10:40:13.065049000 -0700
@@ -240,7 +240,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/cris/arch-v10/kernel/time.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/cris/arch-v10/kernel/time.c 2004-06-07 12:14:42.000000000 -0700
+++ mm1-2.6.7-rc3/arch/cris/arch-v10/kernel/time.c 2004-06-09 10:40:13.155035000 -0700
@@ -253,7 +253,7 @@
*/
static struct irqaction irq2 = { timer_interrupt, SA_SHIRQ | SA_INTERRUPT,
- 0, "timer", NULL, NULL};
+ CPU_MASK_NONE, "timer", NULL, NULL};
void __init
time_init(void)
Index: mm1-2.6.7-rc3/arch/i386/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/i386/kernel/irq.c 2004-06-09 07:10:49.966930000 -0700
+++ mm1-2.6.7-rc3/arch/i386/kernel/irq.c 2004-06-09 10:40:13.221025000 -0700
@@ -654,7 +654,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/i386/kernel/i8259.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/i386/kernel/i8259.c 2004-06-09 07:11:34.007235000 -0700
+++ mm1-2.6.7-rc3/arch/i386/kernel/i8259.c 2004-06-09 10:40:13.230024000 -0700
@@ -333,7 +333,7 @@
* New motherboards sometimes make IRQ 13 be a PCI interrupt,
* so allow interrupt sharing.
*/
-static struct irqaction fpu_irq = { math_error_irq, 0, 0, "fpu", NULL, NULL };
+static struct irqaction fpu_irq = { math_error_irq, 0, CPU_MASK_NONE, "fpu", NULL, NULL };
void __init init_ISA_irqs (void)
{
Index: mm1-2.6.7-rc3/arch/i386/mach-default/setup.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/i386/mach-default/setup.c 2004-06-07 12:14:05.000000000 -0700
+++ mm1-2.6.7-rc3/arch/i386/mach-default/setup.c 2004-06-09 10:40:13.267018000 -0700
@@ -27,7 +27,7 @@
/*
* IRQ2 is cascade interrupt to second interrupt controller
*/
-static struct irqaction irq2 = { no_action, 0, 0, "cascade", NULL, NULL};
+static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
/**
* intr_init_hook - post gate setup interrupt initialisation
@@ -71,7 +71,7 @@
{
}
-static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL};
+static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
/**
* time_init_hook - do any specific initialisations for the system timer.
Index: mm1-2.6.7-rc3/arch/i386/mach-pc9800/setup.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/i386/mach-pc9800/setup.c 2004-06-07 12:13:34.000000000 -0700
+++ mm1-2.6.7-rc3/arch/i386/mach-pc9800/setup.c 2004-06-09 10:40:13.287015000 -0700
@@ -34,7 +34,7 @@
/*
* IRQ7 is cascade interrupt to second interrupt controller
*/
-static struct irqaction irq7 = { no_action, 0, 0, "cascade", NULL, NULL};
+static struct irqaction irq7 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
/**
* intr_init_hook - post gate setup interrupt initialisation
@@ -82,7 +82,7 @@
{
}
-static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL};
+static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
/**
* time_init_hook - do any specific initialisations for the system timer.
Index: mm1-2.6.7-rc3/arch/ia64/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/ia64/kernel/irq.c 2004-06-09 07:10:24.000000000 -0700
+++ mm1-2.6.7-rc3/arch/ia64/kernel/irq.c 2004-06-09 10:40:13.355005000 -0700
@@ -612,7 +612,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/ia64/lib/kgdb_serial.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/ia64/lib/kgdb_serial.c 2004-06-09 07:10:25.000000000 -0700
+++ mm1-2.6.7-rc3/arch/ia64/lib/kgdb_serial.c 2004-06-09 10:40:13.429993000 -0700
@@ -486,7 +486,7 @@
irq_desc_t *desc;
kgdb_action.handler = gdb_interrupt;
kgdb_action.flags = IRQ_T(gdb_async_info);
- kgdb_action.mask = 0;
+ kgdb_action.mask = CPU_MASK_NONE;
kgdb_action.name = "KGDB-stub";
kgdb_action.next = NULL;
kgdb_action.dev_id = NULL;
Index: mm1-2.6.7-rc3/arch/mips/baget/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/baget/irq.c 2004-06-07 12:14:42.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/baget/irq.c 2004-06-09 10:40:13.512981000 -0700
@@ -325,7 +325,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
@@ -389,7 +389,7 @@
}
static struct irqaction irq0 =
-{ write_err_interrupt, SA_INTERRUPT, 0, "bus write error", NULL, NULL};
+{ write_err_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "bus write error", NULL, NULL};
void __init init_IRQ(void)
{
Index: mm1-2.6.7-rc3/arch/mips/baget/time.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/baget/time.c 2004-06-07 12:13:34.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/baget/time.c 2004-06-09 10:40:13.545976000 -0700
@@ -67,7 +67,7 @@
}
static struct irqaction timer_irq =
-{ timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL};
+{ timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
void __init time_init(void)
{
Index: mm1-2.6.7-rc3/arch/mips/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/kernel/irq.c 2004-06-07 12:13:39.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/kernel/irq.c 2004-06-09 10:40:13.578971000 -0700
@@ -487,7 +487,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/mips/vr4181/common/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/vr4181/common/irq.c 2004-06-07 12:15:11.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/vr4181/common/irq.c 2004-06-09 10:40:13.634962000 -0700
@@ -180,9 +180,9 @@
extern void mips_cpu_irq_init(u32 irq_base);
static struct irqaction cascade =
- { no_action, SA_INTERRUPT, 0, "cascade", NULL, NULL };
+ { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL };
static struct irqaction reserved =
- { no_action, SA_INTERRUPT, 0, "cascade", NULL, NULL };
+ { no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade", NULL, NULL };
void __init init_IRQ(void)
{
Index: mm1-2.6.7-rc3/arch/mips/gt64120/common/time.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/gt64120/common/time.c 2004-06-07 12:14:58.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/gt64120/common/time.c 2004-06-09 10:40:13.676956000 -0700
@@ -80,7 +80,7 @@
timer.name = "timer";
timer.dev_id = NULL;
timer.next = NULL;
- timer.mask = 0;
+ timer.mask = CPU_MASK_NONE;
irq_desc[GT_TIMER].action = &timer;
enable_irq(GT_TIMER);
Index: mm1-2.6.7-rc3/arch/mips/vr41xx/common/giu.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/vr41xx/common/giu.c 2004-06-07 12:13:38.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/vr41xx/common/giu.c 2004-06-09 10:40:13.722949000 -0700
@@ -209,7 +209,7 @@
};
static struct vr41xx_giuint_cascade giuint_cascade[GIUINT_NR_IRQS];
-static struct irqaction giu_cascade = {no_action, 0, 0, "cascade", NULL, NULL};
+static struct irqaction giu_cascade = {no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
static int no_irq_number(int irq)
{
Index: mm1-2.6.7-rc3/arch/mips/vr41xx/common/icu.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/vr41xx/common/icu.c 2004-06-07 12:13:35.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/vr41xx/common/icu.c 2004-06-09 10:40:13.738946000 -0700
@@ -288,7 +288,7 @@
/*=======================================================================*/
-static struct irqaction icu_cascade = {no_action, 0, 0, "cascade", NULL, NULL};
+static struct irqaction icu_cascade = {no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
static void __init vr41xx_icu_init(void)
{
Index: mm1-2.6.7-rc3/arch/mips/momentum/jaguar_atx/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/momentum/jaguar_atx/irq.c 2004-06-07 12:14:34.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/momentum/jaguar_atx/irq.c 2004-06-09 10:40:13.781940000 -0700
@@ -42,7 +42,7 @@
extern asmlinkage void jaguar_handle_int(void);
static struct irqaction cascade_mv64340 = {
- no_action, SA_INTERRUPT, 0, "MV64340-Cascade", NULL, NULL
+ no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
};
void __init init_IRQ(void)
Index: mm1-2.6.7-rc3/arch/mips/momentum/ocelot_c/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/momentum/ocelot_c/irq.c 2004-06-07 12:14:56.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/momentum/ocelot_c/irq.c 2004-06-09 10:40:13.806936000 -0700
@@ -53,11 +53,11 @@
extern void cpci_irq_init(void);
static struct irqaction cascade_fpga = {
- no_action, SA_INTERRUPT, 0, "cascade via FPGA", NULL, NULL
+ no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via FPGA", NULL, NULL
};
static struct irqaction cascade_mv64340 = {
- no_action, SA_INTERRUPT, 0, "cascade via MV64340", NULL, NULL
+ no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL
};
void __init init_IRQ(void)
Index: mm1-2.6.7-rc3/arch/mips/jmr3927/rbhma3100/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/jmr3927/rbhma3100/irq.c 2004-06-07 12:14:10.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/jmr3927/rbhma3100/irq.c 2004-06-09 10:40:13.850929000 -0700
@@ -301,7 +301,7 @@
}
static struct irqaction ioc_action = {
- jmr3927_ioc_interrupt, 0, 0, "IOC", NULL, NULL,
+ jmr3927_ioc_interrupt, 0, CPU_MASK_NONE, "IOC", NULL, NULL,
};
static void jmr3927_isac_interrupt(int irq, void *dev_id, struct pt_regs *regs)
@@ -318,7 +318,7 @@
}
static struct irqaction isac_action = {
- jmr3927_isac_interrupt, 0, 0, "ISAC", NULL, NULL,
+ jmr3927_isac_interrupt, 0, CPU_MASK_NONE, "ISAC", NULL, NULL,
};
@@ -327,7 +327,7 @@
printk(KERN_WARNING "ISA error interrupt (irq 0x%x).\n", irq);
}
static struct irqaction isaerr_action = {
- jmr3927_isaerr_interrupt, 0, 0, "ISA error", NULL, NULL,
+ jmr3927_isaerr_interrupt, 0, CPU_MASK_NONE, "ISA error", NULL, NULL,
};
static void jmr3927_pcierr_interrupt(int irq, void * dev_id, struct pt_regs * regs)
@@ -337,7 +337,7 @@
tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
}
static struct irqaction pcierr_action = {
- jmr3927_pcierr_interrupt, 0, 0, "PCI error", NULL, NULL,
+ jmr3927_pcierr_interrupt, 0, CPU_MASK_NONE, "PCI error", NULL, NULL,
};
int jmr3927_ether1_irq = 0;
Index: mm1-2.6.7-rc3/arch/mips/ddb5xxx/ddb5074/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/ddb5xxx/ddb5074/irq.c 2004-06-07 12:15:11.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/ddb5xxx/ddb5074/irq.c 2004-06-09 10:40:13.880925000 -0700
@@ -24,7 +24,7 @@
extern asmlinkage void ddbIRQ(void);
-static struct irqaction irq_cascade = { no_action, 0, 0, "cascade", NULL, NULL };
+static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */
#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */
Index: mm1-2.6.7-rc3/arch/mips/ddb5xxx/ddb5477/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/ddb5xxx/ddb5477/irq.c 2004-06-07 12:13:39.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/ddb5xxx/ddb5477/irq.c 2004-06-09 10:40:13.901922000 -0700
@@ -77,7 +77,7 @@
extern void mips_cpu_irq_init(u32 base);
extern asmlinkage void ddb5477_handle_int(void);
extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-static struct irqaction irq_cascade = { no_action, 0, 0, "cascade", NULL, NULL };
+static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
void
ddb5477_irq_setup(void)
Index: mm1-2.6.7-rc3/arch/mips/ddb5xxx/ddb5476/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/ddb5xxx/ddb5476/irq.c 2004-06-07 12:14:57.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/ddb5xxx/ddb5476/irq.c 2004-06-09 10:40:13.924918000 -0700
@@ -107,8 +107,8 @@
/* memory resource acquire in ddb_setup */
}
-static struct irqaction irq_cascade = { no_action, 0, 0, "cascade", NULL, NULL };
-static struct irqaction irq_error = { no_action, 0, 0, "error", NULL, NULL };
+static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
+static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL };
extern asmlinkage void ddb5476_handle_int(void);
extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
Index: mm1-2.6.7-rc3/arch/mips/sibyte/sb1250/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/sibyte/sb1250/irq.c 2004-06-07 12:14:59.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/sibyte/sb1250/irq.c 2004-06-09 10:40:13.969911000 -0700
@@ -279,7 +279,7 @@
static struct irqaction sb1250_dummy_action = {
.handler = sb1250_dummy_handler,
.flags = 0,
- .mask = 0,
+ .mask = CPU_MASK_NONE,
.name = "sb1250-private",
.next = NULL,
.dev_id = 0
Index: mm1-2.6.7-rc3/arch/mips/tx4927/common/tx4927_irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/tx4927/common/tx4927_irq.c 2004-06-07 12:15:11.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/tx4927/common/tx4927_irq.c 2004-06-09 10:40:14.010905000 -0700
@@ -172,7 +172,7 @@
.set_affinity = NULL
};
-#define TX4927_PIC_ACTION(s) { no_action, 0, 0, s, NULL, NULL }
+#define TX4927_PIC_ACTION(s) { no_action, 0, CPU_MASK_NONE, s, NULL, NULL }
static struct irqaction tx4927_irq_pic_action =
TX4927_PIC_ACTION(TX4927_PIC_NAME);
Index: mm1-2.6.7-rc3/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c 2004-06-07 12:14:04.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c 2004-06-09 10:40:14.037901000 -0700
@@ -337,8 +337,8 @@
return (sw_irq);
}
-//#define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, 0, 0, s, NULL, NULL }
-#define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, SA_SHIRQ, 0, s, NULL, NULL }
+//#define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, 0, CPU_MASK_NONE, s, NULL, NULL }
+#define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, SA_SHIRQ, CPU_MASK_NONE, s, NULL, NULL }
static struct irqaction toshiba_rbtx4927_irq_ioc_action =
TOSHIBA_RBTX4927_PIC_ACTION(TOSHIBA_RBTX4927_IOC_NAME);
#ifdef CONFIG_TOSHIBA_FPCIB0
Index: mm1-2.6.7-rc3/arch/mips/sgi-ip32/ip32-irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/mips/sgi-ip32/ip32-irq.c 2004-06-07 12:14:24.000000000 -0700
+++ mm1-2.6.7-rc3/arch/mips/sgi-ip32/ip32-irq.c 2004-06-09 10:40:14.082894000 -0700
@@ -123,9 +123,9 @@
struct pt_regs *regs);
struct irqaction memerr_irq = { crime_memerr_intr, SA_INTERRUPT,
- 0, "CRIME memory error", NULL, NULL };
+ CPU_MASK_NONE, "CRIME memory error", NULL, NULL };
struct irqaction cpuerr_irq = { crime_cpuerr_intr, SA_INTERRUPT,
- 0, "CRIME CPU error", NULL, NULL };
+ CPU_MASK_NONE, "CRIME CPU error", NULL, NULL };
extern void ip32_handle_int(void);
Index: mm1-2.6.7-rc3/arch/parisc/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/parisc/kernel/irq.c 2004-06-07 12:14:05.000000000 -0700
+++ mm1-2.6.7-rc3/arch/parisc/kernel/irq.c 2004-06-09 10:40:14.151884000 -0700
@@ -644,7 +644,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/ppc64/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/ppc64/kernel/irq.c 2004-06-09 07:11:49.715847000 -0700
+++ mm1-2.6.7-rc3/arch/ppc64/kernel/irq.c 2004-06-09 10:40:14.181879000 -0700
@@ -206,7 +206,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->dev_id = dev_id;
action->next = NULL;
Index: mm1-2.6.7-rc3/arch/sh/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/sh/kernel/irq.c 2004-06-07 12:14:05.000000000 -0700
+++ mm1-2.6.7-rc3/arch/sh/kernel/irq.c 2004-06-09 10:40:14.243870000 -0700
@@ -436,7 +436,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/sh/kernel/time.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/sh/kernel/time.c 2004-06-07 12:13:34.000000000 -0700
+++ mm1-2.6.7-rc3/arch/sh/kernel/time.c 2004-06-09 10:40:14.278864000 -0700
@@ -391,7 +391,7 @@
}
__setup("sh_pclk=", sh_pclk_setup);
-static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL};
+static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
void get_current_frequency_divisors(unsigned int *ifc, unsigned int *bfc, unsigned int *pfc)
{
Index: mm1-2.6.7-rc3/arch/sh/cchips/hd6446x/hd64465/setup.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/sh/cchips/hd6446x/hd64465/setup.c 2004-06-07 12:15:12.000000000 -0700
+++ mm1-2.6.7-rc3/arch/sh/cchips/hd6446x/hd64465/setup.c 2004-06-09 10:40:14.334856000 -0700
@@ -154,7 +154,7 @@
return irq;
}
-static struct irqaction irq0 = { hd64465_interrupt, SA_INTERRUPT, 0, "HD64465", NULL, NULL};
+static struct irqaction irq0 = { hd64465_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64465", NULL, NULL};
static int __init setup_hd64465(void)
Index: mm1-2.6.7-rc3/arch/sh/cchips/hd6446x/hd64461/setup.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/sh/cchips/hd6446x/hd64461/setup.c 2004-06-07 12:14:56.000000000 -0700
+++ mm1-2.6.7-rc3/arch/sh/cchips/hd6446x/hd64461/setup.c 2004-06-09 10:40:14.355853000 -0700
@@ -134,7 +134,7 @@
return __irq_demux(irq);
}
-static struct irqaction irq0 = { hd64461_interrupt, SA_INTERRUPT, 0, "HD64461", NULL, NULL };
+static struct irqaction irq0 = { hd64461_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "HD64461", NULL, NULL };
int __init setup_hd64461(void)
{
Index: mm1-2.6.7-rc3/arch/sparc/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/sparc/kernel/irq.c 2004-06-07 12:13:36.000000000 -0700
+++ mm1-2.6.7-rc3/arch/sparc/kernel/irq.c 2004-06-09 10:40:14.433841000 -0700
@@ -449,7 +449,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->dev_id = NULL;
action->next = NULL;
@@ -529,7 +529,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/sparc/kernel/sun4d_irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/sparc/kernel/sun4d_irq.c 2004-06-07 12:13:34.000000000 -0700
+++ mm1-2.6.7-rc3/arch/sparc/kernel/sun4d_irq.c 2004-06-09 10:40:14.477834000 -0700
@@ -336,7 +336,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/sparc64/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/sparc64/kernel/irq.c 2004-06-09 07:11:45.739451000 -0700
+++ mm1-2.6.7-rc3/arch/sparc64/kernel/irq.c 2004-06-09 10:55:57.626454000 -0700
@@ -118,10 +118,6 @@
action->flags |= __irq_ino(irq) << 48;
#define get_ino_in_irqaction(action) (action->flags >> 48)
-#if NR_CPUS > 64
-#error irqaction embedded smp affinity does not work with > 64 cpus, FIXME
-#endif
-
#define put_smpaff_in_irqaction(action, smpaff) (action)->mask = (smpaff)
#define get_smpaff_in_irqaction(action) ((action)->mask)
@@ -454,7 +450,7 @@
action->next = NULL;
action->dev_id = dev_id;
put_ino_in_irqaction(action, irq);
- put_smpaff_in_irqaction(action, 0);
+ put_smpaff_in_irqaction(action, CPU_MASK_NONE);
if (tmp)
tmp->next = action;
@@ -690,7 +686,7 @@
cpumask_t cpu_mask;
unsigned int buddy, ticks;
- cpus_addr(cpu_mask)[0] = get_smpaff_in_irqaction(ap);
+ cpu_mask = get_smpaff_in_irqaction(ap);
cpus_and(cpu_mask, cpu_mask, cpu_online_map);
if (cpus_empty(cpu_mask))
cpu_mask = cpu_online_map;
@@ -711,7 +707,7 @@
if (++buddy >= NR_CPUS)
buddy = 0;
if (++ticks > NR_CPUS) {
- put_smpaff_in_irqaction(ap, 0);
+ put_smpaff_in_irqaction(ap, CPU_MASK_NONE);
goto out;
}
}
@@ -945,7 +941,7 @@
action->name = name;
action->next = NULL;
put_ino_in_irqaction(action, irq);
- put_smpaff_in_irqaction(action, 0);
+ put_smpaff_in_irqaction(action, CPU_MASK_NONE);
*(bucket->pil + irq_action) = action;
enable_irq(irq);
@@ -1163,45 +1159,6 @@
#ifdef CONFIG_SMP
-#define HEX_DIGITS 16
-
-static unsigned int parse_hex_value (const char __user *buffer,
- unsigned long count, unsigned long *ret)
-{
- unsigned char hexnum [HEX_DIGITS];
- unsigned long value;
- int i;
-
- if (!count)
- return -EINVAL;
- if (count > HEX_DIGITS)
- count = HEX_DIGITS;
- if (copy_from_user(hexnum, buffer, count))
- return -EFAULT;
-
- /*
- * Parse the first 8 characters as a hex string, any non-hex char
- * is end-of-string. '00e1', 'e1', '00E1', 'E1' are all the same.
- */
- value = 0;
-
- for (i = 0; i < count; i++) {
- unsigned int c = hexnum[i];
-
- switch (c) {
- case '0' ... '9': c -= '0'; break;
- case 'a' ... 'f': c -= 'a'-10; break;
- case 'A' ... 'F': c -= 'A'-10; break;
- default:
- goto out;
- }
- value = (value << 4) | c;
- }
-out:
- *ret = value;
- return 0;
-}
-
static int irq_affinity_read_proc (char *page, char **start, off_t off,
int count, int *eof, void *data)
{
@@ -1210,7 +1167,7 @@
cpumask_t mask;
int len;
- cpus_addr(mask)[0] = get_smpaff_in_irqaction(ap);
+ mask = get_smpaff_in_irqaction(ap);
if (cpus_empty(mask))
mask = cpu_online_map;
@@ -1221,7 +1178,7 @@
return len;
}
-static inline void set_intr_affinity(int irq, unsigned long hw_aff)
+static inline void set_intr_affinity(int irq, cpumask_t hw_aff)
{
struct ino_bucket *bp = ivector_table + irq;
@@ -1239,22 +1196,17 @@
unsigned long count, void *data)
{
int irq = (long) data, full_count = count, err;
- unsigned long new_value, i;
+ cpumask_t new_value;
- err = parse_hex_value(buffer, count, &new_value);
+ err = cpumask_parse(buffer, count, new_value);
/*
* Do not allow disabling IRQs completely - it's a too easy
* way to make the system unusable accidentally :-) At least
* one online CPU still has to be targeted.
*/
- for (i = 0; i < NR_CPUS; i++) {
- if ((new_value & (1UL << i)) != 0 &&
- !cpu_online(i))
- new_value &= ~(1UL << i);
- }
-
- if (!new_value)
+ cpus_and(new_value, new_value, cpu_online_map);
+ if (cpus_empty(new_value))
return -EINVAL;
set_intr_affinity(irq, new_value);
Index: mm1-2.6.7-rc3/arch/sparc64/kernel/smp.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/sparc64/kernel/smp.c 2004-06-09 07:11:49.087942000 -0700
+++ mm1-2.6.7-rc3/arch/sparc64/kernel/smp.c 2004-06-09 10:40:14.539825000 -0700
@@ -414,9 +414,6 @@
* packet, but we have no use for that. However we do take advantage of
* the new pipelining feature (ie. dispatch to multiple cpus simultaneously).
*/
-#if NR_CPUS > 32
-#error Fixup cheetah_xcall_deliver Dave...
-#endif
static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
{
u64 pstate, ver;
Index: mm1-2.6.7-rc3/arch/um/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/um/kernel/irq.c 2004-06-07 12:14:56.000000000 -0700
+++ mm1-2.6.7-rc3/arch/um/kernel/irq.c 2004-06-09 10:40:14.575819000 -0700
@@ -419,7 +419,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/v850/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/v850/kernel/irq.c 2004-06-07 12:14:56.000000000 -0700
+++ mm1-2.6.7-rc3/arch/v850/kernel/irq.c 2004-06-09 10:40:14.611814000 -0700
@@ -392,7 +392,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/v850/kernel/time.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/v850/kernel/time.c 2004-06-07 12:14:42.000000000 -0700
+++ mm1-2.6.7-rc3/arch/v850/kernel/time.c 2004-06-09 10:40:14.628811000 -0700
@@ -203,7 +203,7 @@
static struct irqaction timer_irqaction = {
timer_interrupt,
SA_INTERRUPT,
- 0,
+ CPU_MASK_NONE,
"timer",
&timer_dev_id,
NULL
Index: mm1-2.6.7-rc3/arch/v850/kernel/fpga85e2c.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/v850/kernel/fpga85e2c.c 2004-06-07 12:14:58.000000000 -0700
+++ mm1-2.6.7-rc3/arch/v850/kernel/fpga85e2c.c 2004-06-09 10:40:14.642809000 -0700
@@ -168,5 +168,5 @@
static int reg_snap_dev_id;
static struct irqaction reg_snap_action = {
- make_reg_snap, 0, 0, "reg_snap", ®_snap_dev_id, 0
+ make_reg_snap, 0, CPU_MASK_NONE, "reg_snap", ®_snap_dev_id, 0
};
Index: mm1-2.6.7-rc3/arch/x86_64/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/x86_64/kernel/irq.c 2004-06-09 07:10:24.000000000 -0700
+++ mm1-2.6.7-rc3/arch/x86_64/kernel/irq.c 2004-06-09 10:40:14.688802000 -0700
@@ -491,7 +491,7 @@
action->handler = handler;
action->flags = irqflags;
- action->mask = 0;
+ cpus_clear(action->mask);
action->name = devname;
action->next = NULL;
action->dev_id = dev_id;
Index: mm1-2.6.7-rc3/arch/x86_64/kernel/i8259.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/x86_64/kernel/i8259.c 2004-06-09 07:11:50.439737000 -0700
+++ mm1-2.6.7-rc3/arch/x86_64/kernel/i8259.c 2004-06-09 10:40:14.701800000 -0700
@@ -390,7 +390,7 @@
* IRQ2 is cascade interrupt to second interrupt controller
*/
-static struct irqaction irq2 = { no_action, 0, 0, "cascade", NULL, NULL};
+static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
void __init init_ISA_irqs (void)
{
Index: mm1-2.6.7-rc3/arch/x86_64/kernel/time.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/x86_64/kernel/time.c 2004-06-07 12:14:42.000000000 -0700
+++ mm1-2.6.7-rc3/arch/x86_64/kernel/time.c 2004-06-09 10:40:14.736795000 -0700
@@ -689,7 +689,7 @@
}
static struct irqaction irq0 = {
- timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL
+ timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL
};
extern void __init config_acpi_tables(void);
On Wed, Jun 09, 2004 at 10:59:10AM -0700, William Lee Irwin III wrote:
> Last time I tested this on sparc64 (the only current user of ->mask) it
> appeared to work. The following patch makes irqaction's ->mask a cpumask
> as it was intended to be and wraps up the rest of the sweep. Only struct
> irqaction is usefully greppable, so there may be some assignments to
> ->mask missing still. This removes more code than it adds.
> Compiletested i386 and sparc64, runtime tested on sparc64 in a prior
> incarnation. vs. 2.6.7-rc3-mm1
The cpumask patches broke alpha's build, even without the irqaction
patch, largely centering around cpu_possible_map. Atop irqaction.patch:
Index: mm1-2.6.7-rc3/include/asm-alpha/smp.h
===================================================================
--- mm1-2.6.7-rc3.orig/include/asm-alpha/smp.h 2004-06-07 12:15:11.000000000 -0700
+++ mm1-2.6.7-rc3/include/asm-alpha/smp.h 2004-06-09 14:19:58.000000000 -0700
@@ -50,9 +50,7 @@
extern int smp_num_cpus;
#define cpu_possible_map cpu_present_mask
-#define cpu_online(cpu) cpu_isset(cpu, cpu_online_map)
-
-extern int smp_call_function_on_cpu(void (*func) (void *info), void *info,int retry, int wait, unsigned long cpu);
+int smp_call_function_on_cpu(void (*func) (void *info), void *info,int retry, int wait, cpumask_t cpu);
#else /* CONFIG_SMP */
Index: mm1-2.6.7-rc3/arch/alpha/kernel/irq.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/alpha/kernel/irq.c 2004-06-09 13:40:11.000000000 -0700
+++ mm1-2.6.7-rc3/arch/alpha/kernel/irq.c 2004-06-09 14:29:16.000000000 -0700
@@ -227,7 +227,7 @@
#ifdef CONFIG_SMP
static struct proc_dir_entry * smp_affinity_entry[NR_IRQS];
static char irq_user_affinity[NR_IRQS];
-static unsigned long irq_affinity[NR_IRQS] = { [0 ... NR_IRQS-1] = ~0UL };
+static cpumask_t irq_affinity[NR_IRQS] = { [0 ... NR_IRQS-1] = CPU_MASK_ALL };
static void
select_smp_affinity(int irq)
@@ -238,16 +238,14 @@
if (! irq_desc[irq].handler->set_affinity || irq_user_affinity[irq])
return;
- while (((cpu_present_mask >> cpu) & 1) == 0)
+ while (!cpu_possible(cpu))
cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
last_cpu = cpu;
- irq_affinity[irq] = 1UL << cpu;
- irq_desc[irq].handler->set_affinity(irq, 1UL << cpu);
+ irq_affinity[irq] = cpumask_of_cpu(cpu);
+ irq_desc[irq].handler->set_affinity(irq, cpumask_of_cpu(cpu));
}
-#define HEX_DIGITS 16
-
static int
irq_affinity_read_proc (char *page, char **start, off_t off,
int count, int *eof, void *data)
@@ -259,67 +257,28 @@
return len;
}
-static unsigned int
-parse_hex_value (const char __user *buffer,
- unsigned long count, unsigned long *ret)
-{
- unsigned char hexnum [HEX_DIGITS];
- unsigned long value;
- unsigned long i;
-
- if (!count)
- return -EINVAL;
- if (count > HEX_DIGITS)
- count = HEX_DIGITS;
- if (copy_from_user(hexnum, buffer, count))
- return -EFAULT;
-
- /*
- * Parse the first 8 characters as a hex string, any non-hex char
- * is end-of-string. '00e1', 'e1', '00E1', 'E1' are all the same.
- */
- value = 0;
-
- for (i = 0; i < count; i++) {
- unsigned int c = hexnum[i];
-
- switch (c) {
- case '0' ... '9': c -= '0'; break;
- case 'a' ... 'f': c -= 'a'-10; break;
- case 'A' ... 'F': c -= 'A'-10; break;
- default:
- goto out;
- }
- value = (value << 4) | c;
- }
-out:
- *ret = value;
- return 0;
-}
-
static int
irq_affinity_write_proc(struct file *file, const char __user *buffer,
unsigned long count, void *data)
{
int irq = (long) data, full_count = count, err;
- unsigned long new_value;
+ cpumask_t new_value;
if (!irq_desc[irq].handler->set_affinity)
return -EIO;
- err = parse_hex_value(buffer, count, &new_value);
+ err = cpumask_parse(buffer, count, new_value);
/* The special value 0 means release control of the
affinity to kernel. */
- if (new_value == 0) {
+ cpus_and(new_value, new_value, cpu_online_map);
+ if (cpus_empty(new_value)) {
irq_user_affinity[irq] = 0;
select_smp_affinity(irq);
}
/* Do not allow disabling IRQs completely - it's a too easy
way to make the system unusable accidentally :-) At least
one online CPU still has to be targeted. */
- else if (!(new_value & cpu_present_mask))
- return -EINVAL;
else {
irq_affinity[irq] = new_value;
irq_user_affinity[irq] = 1;
@@ -344,10 +303,10 @@
prof_cpu_mask_write_proc(struct file *file, const char __user *buffer,
unsigned long count, void *data)
{
- unsigned long *mask = (unsigned long *) data, full_count = count, err;
- unsigned long new_value;
+ unsigned long full_count = count, err;
+ cpumask_t new_value, *mask = (cpumask_t *)data;
- err = parse_hex_value(buffer, count, &new_value);
+ err = cpumask_parse(buffer, count, new_value);
if (err)
return err;
Index: mm1-2.6.7-rc3/arch/alpha/kernel/process.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/alpha/kernel/process.c 2004-06-07 12:14:58.000000000 -0700
+++ mm1-2.6.7-rc3/arch/alpha/kernel/process.c 2004-06-09 13:51:37.000000000 -0700
@@ -119,8 +119,8 @@
#ifdef CONFIG_SMP
/* Wait for the secondaries to halt. */
- clear_bit(boot_cpuid, &cpu_present_mask);
- while (cpu_present_mask)
+ cpu_clear(boot_cpuid, cpu_possible_map);
+ while (cpus_weight(cpu_possible_map))
barrier();
#endif
Index: mm1-2.6.7-rc3/arch/alpha/kernel/smp.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/alpha/kernel/smp.c 2004-06-07 12:14:02.000000000 -0700
+++ mm1-2.6.7-rc3/arch/alpha/kernel/smp.c 2004-06-09 14:32:40.000000000 -0700
@@ -68,7 +68,7 @@
static int smp_secondary_alive __initdata = 0;
/* Which cpus ids came online. */
-unsigned long cpu_present_mask;
+cpumask_t cpu_present_mask;
cpumask_t cpu_online_map;
EXPORT_SYMBOL(cpu_online_map);
@@ -522,7 +522,7 @@
smp_num_probed = 1;
hwrpb_cpu_present_mask = (1UL << boot_cpuid);
}
- cpu_present_mask = 1UL << boot_cpuid;
+ cpu_present_mask = cpumask_of_cpu(boot_cpuid);
printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
smp_num_probed, hwrpb_cpu_present_mask);
@@ -547,7 +547,7 @@
/* Nothing to do on a UP box, or when told not to. */
if (smp_num_probed == 1 || max_cpus == 0) {
- cpu_present_mask = 1UL << boot_cpuid;
+ cpu_present_mask = cpumask_of_cpu(boot_cpuid);
printk(KERN_INFO "SMP mode deactivated.\n");
return;
}
@@ -562,7 +562,7 @@
if (((hwrpb_cpu_present_mask >> i) & 1) == 0)
continue;
- cpu_present_mask |= 1UL << i;
+ cpu_set(i, cpu_possible_map);
cpu_count++;
}
@@ -597,7 +597,7 @@
if (cpu_online(cpu))
bogosum += cpu_data[cpu].loops_per_jiffy;
- printk(KERN_INFO "SMP: Total of %ld processors activated "
+ printk(KERN_INFO "SMP: Total of %d processors activated "
"(%lu.%02lu BogoMIPS).\n",
num_online_cpus(),
(bogosum + 2500) / (500000/HZ),
@@ -638,23 +638,17 @@
static void
-send_ipi_message(unsigned long to_whom, enum ipi_message_type operation)
+send_ipi_message(cpumask_t to_whom, enum ipi_message_type operation)
{
- unsigned long i, set, n;
+ int i;
mb();
- for (i = to_whom; i ; i &= ~set) {
- set = i & -i;
- n = __ffs(set);
- set_bit(operation, &ipi_data[n].bits);
- }
+ for_each_cpu_mask(i, to_whom)
+ set_bit(operation, &ipi_data[i].bits);
mb();
- for (i = to_whom; i ; i &= ~set) {
- set = i & -i;
- n = __ffs(set);
- wripir(n);
- }
+ for_each_cpu_mask(i, to_whom)
+ wripir(i);
}
/* Structure and data for smp_call_function. This is designed to
@@ -784,13 +778,14 @@
printk(KERN_WARNING
"smp_send_reschedule: Sending IPI to self.\n");
#endif
- send_ipi_message(1UL << cpu, IPI_RESCHEDULE);
+ send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
}
void
smp_send_stop(void)
{
- unsigned long to_whom = cpu_present_mask & ~(1UL << smp_processor_id());
+ cpumask_t to_whom = cpu_possible_map;
+ cpu_clear(smp_processor_id(), to_whom);
#ifdef DEBUG_IPI_MSG
if (hard_smp_processor_id() != boot_cpu_id)
printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n");
@@ -814,7 +809,7 @@
int
smp_call_function_on_cpu (void (*func) (void *info), void *info, int retry,
- int wait, unsigned long to_whom)
+ int wait, cpumask_t to_whom)
{
struct smp_call_struct data;
unsigned long timeout;
@@ -827,8 +822,8 @@
data.info = info;
data.wait = wait;
- to_whom &= ~(1L << smp_processor_id());
- num_cpus_to_call = hweight64(to_whom);
+ cpu_clear(smp_processor_id(), to_whom);
+ num_cpus_to_call = cpus_weight(to_whom);
atomic_set(&data.unstarted_count, num_cpus_to_call);
atomic_set(&data.unfinished_count, num_cpus_to_call);
Index: mm1-2.6.7-rc3/arch/alpha/kernel/setup.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/alpha/kernel/setup.c 2004-06-09 13:39:28.000000000 -0700
+++ mm1-2.6.7-rc3/arch/alpha/kernel/setup.c 2004-06-09 14:30:48.000000000 -0700
@@ -1245,9 +1245,9 @@
platform_string(), nr_processors);
#ifdef CONFIG_SMP
- seq_printf(f, "cpus active\t\t: %ld\n"
+ seq_printf(f, "cpus active\t\t: %d\n"
"cpu active mask\t\t: %016lx\n",
- num_online_cpus(), cpu_present_mask);
+ num_online_cpus(), cpus_addr(cpu_possible_map)[0]);
#endif
show_cache_size (f, "L1 Icache", alpha_l1i_cacheshape);
Index: mm1-2.6.7-rc3/arch/alpha/kernel/sys_dp264.c
===================================================================
--- mm1-2.6.7-rc3.orig/arch/alpha/kernel/sys_dp264.c 2004-06-07 12:14:01.000000000 -0700
+++ mm1-2.6.7-rc3/arch/alpha/kernel/sys_dp264.c 2004-06-09 14:41:07.000000000 -0700
@@ -53,7 +53,6 @@
register int bcpu = boot_cpuid;
#ifdef CONFIG_SMP
- register unsigned long cpm = cpu_present_mask;
volatile unsigned long *dim0, *dim1, *dim2, *dim3;
unsigned long mask0, mask1, mask2, mask3, dummy;
@@ -72,10 +71,10 @@
dim1 = &cchip->dim1.csr;
dim2 = &cchip->dim2.csr;
dim3 = &cchip->dim3.csr;
- if ((cpm & 1) == 0) dim0 = &dummy;
- if ((cpm & 2) == 0) dim1 = &dummy;
- if ((cpm & 4) == 0) dim2 = &dummy;
- if ((cpm & 8) == 0) dim3 = &dummy;
+ if (cpu_possible(0)) dim0 = &dummy;
+ if (cpu_possible(1)) dim1 = &dummy;
+ if (cpu_possible(2)) dim2 = &dummy;
+ if (cpu_possible(3)) dim3 = &dummy;
*dim0 = mask0;
*dim1 = mask1;
@@ -164,13 +163,13 @@
}
static void
-cpu_set_irq_affinity(unsigned int irq, unsigned long affinity)
+cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
{
int cpu;
for (cpu = 0; cpu < 4; cpu++) {
unsigned long aff = cpu_irq_affinity[cpu];
- if (affinity & (1UL << cpu))
+ if (cpu_isset(cpu, affinity))
aff |= 1UL << irq;
else
aff &= ~(1UL << irq);
@@ -179,7 +178,7 @@
}
static void
-dp264_set_affinity(unsigned int irq, unsigned long affinity)
+dp264_set_affinity(unsigned int irq, cpumask_t affinity)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(irq, affinity);
@@ -188,7 +187,7 @@
}
static void
-clipper_set_affinity(unsigned int irq, unsigned long affinity)
+clipper_set_affinity(unsigned int irq, cpumask_t affinity)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(irq - 16, affinity);
On Wednesday, June 09, 2004 10:05 AM, William Lee Irwin III wrote:
>On Wed, Jun 09, 2004 at 01:35:15PM -0300, Norberto Bensa wrote:
>> CC drivers/pci/msi.o
>> drivers/pci/msi.c: In function `msi_address_init':
>> drivers/pci/msi.c:265: error: invalid operands to binary <<
>> make[2]: *** [drivers/pci/msi.o] Error 1
>> make[1]: *** [drivers/pci] Error 2
>> make: *** [drivers] Error 2
>> The offending line is:
>>
>> msi_address->lo_address.value |= (MSI_TARGET_CPU <<
MSI_TARGET_CPU_SHIFT);
>
>The MSI writers have a lot to answer for. Could you test this?
I am looking into it now.
Thanks,
Long
Linux 2.6 (mm tree) Compile Statistics (gcc 3.2.2)
Warnings/Errors Summary
Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------
2.6.7-rc3-mm1 0w/0e 5w/0e 104w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc2-mm2 0w/0e 5w/0e 109w/10e 5w/0e 2w/0e 105w/2e
2.6.7-rc2-mm1 0w/0e 12w/0e 158w/13e 5w/0e 3w/0e 153w/4e
2.6.7-rc1-mm1 0w/0e 6w/0e 108w/0e 5w/0e 2w/0e 104w/0e
2.6.6-mm5 0w/0e 0w/0e 109w/5e 5w/0e 2w/0e 110w/0e
2.6.6-mm4 0w/0e 0w/0e 112w/9e 5w/0e 2w/5e 106w/1e
2.6.6-mm3 3w/9e 0w/0e 120w/26e 5w/0e 2w/0e 114w/10e
2.6.6-mm2 4w/11e 0w/0e 120w/24e 6w/0e 2w/0e 118w/9e
2.6.6-mm1 1w/0e 0w/0e 118w/25e 6w/0e 2w/0e 114w/10e
2.6.6-rc3-mm2 0w/0e 0w/0e 117w/ 0e 8w/0e 2w/0e 116w/0e
2.6.6-rc3-mm1 0w/0e 0w/0e 120w/10e 8w/0e 2w/0e 152w/2e
2.6.6-rc2-mm2 0w/0e 1w/5e 118w/ 0e 8w/0e 3w/0e 118w/0e
2.6.6-rc2-mm1 0w/0e 0w/0e 115w/ 0e 7w/0e 3w/0e 116w/0e
2.6.6-rc1-mm1 0w/0e 0w/7e 122w/ 0e 7w/0e 4w/0e 122w/0e
2.6.5-mm6 0w/0e 0w/0e 123w/ 0e 7w/0e 4w/0e 124w/0e
2.6.5-mm5 0w/0e 0w/0e 119w/ 0e 7w/0e 4w/0e 120w/0e
2.6.5-mm4 0w/0e 0w/0e 120w/ 0e 7w/0e 4w/0e 121w/0e
2.6.5-mm3 0w/0e 1w/0e 121w/12e 7w/0e 3w/0e 123w/0e
2.6.5-mm2 0w/0e 0w/0e 128w/12e 7w/0e 3w/0e 134w/0e
2.6.5-mm1 0w/0e 5w/0e 122w/ 0e 7w/0e 3w/0e 124w/0e
2.6.5-rc3-mm4 0w/0e 0w/0e 124w/ 0e 8w/0e 4w/0e 126w/0e
2.6.5-rc3-mm3 0w/0e 5w/0e 129w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm2 0w/0e 5w/0e 130w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm1 0w/0e 5w/0e 129w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm5 0w/0e 5w/0e 130w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm4 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm3 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm2 0w/0e 5w/0e 137w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc2-mm1 0w/0e 5w/0e 136w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc1-mm2 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.5-rc1-mm1 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.4-mm2 1w/2e 5w/2e 144w/10e 8w/0e 3w/2e 144w/0e
2.6.4-mm1 1w/0e 5w/0e 146w/ 5e 8w/0e 3w/0e 144w/0e
2.6.4-rc2-mm1 1w/0e 5w/0e 146w/12e 11w/0e 3w/0e 147w/2e
2.6.4-rc1-mm2 1w/0e 5w/0e 144w/ 0e 11w/0e 3w/0e 145w/0e
2.6.4-rc1-mm1 1w/0e 5w/0e 147w/ 5e 11w/0e 3w/0e 147w/0e
2.6.3-mm4 1w/0e 5w/0e 146w/ 0e 7w/0e 3w/0e 142w/0e
2.6.3-mm3 1w/2e 5w/2e 146w/15e 7w/0e 3w/2e 144w/5e
2.6.3-mm2 1w/8e 5w/0e 140w/ 0e 7w/0e 3w/0e 138w/0e
2.6.3-mm1 1w/0e 5w/0e 143w/ 5e 7w/0e 3w/0e 141w/0e
2.6.3-rc3-mm1 1w/0e 0w/0e 144w/13e 7w/0e 3w/0e 142w/3e
2.6.3-rc2-mm1 1w/0e 0w/265e 144w/ 5e 7w/0e 3w/0e 145w/0e
2.6.3-rc1-mm1 1w/0e 0w/265e 141w/ 5e 7w/0e 3w/0e 143w/0e
2.6.2-mm1 2w/0e 0w/264e 147w/ 5e 7w/0e 3w/0e 173w/0e
2.6.2-rc3-mm1 2w/0e 0w/265e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc2-mm2 0w/0e 0w/264e 145w/ 5e 7w/0e 3w/0e 171w/0e
2.6.2-rc2-mm1 0w/0e 0w/264e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc1-mm3 0w/0e 0w/265e 144w/ 8e 7w/0e 3w/0e 169w/0e
2.6.2-rc1-mm2 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.2-rc1-mm1 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.1-mm5 2w/5e 0w/264e 153w/11e 10w/0e 3w/0e 180w/0e
2.6.1-mm4 0w/821e 0w/264e 154w/ 5e 8w/1e 5w/0e 179w/0e
2.6.1-mm3 0w/0e 0w/0e 151w/ 5e 10w/0e 3w/0e 177w/0e
2.6.1-mm2 0w/0e 0w/0e 143w/ 5e 12w/0e 3w/0e 171w/0e
2.6.1-mm1 0w/0e 0w/0e 146w/ 9e 12w/0e 6w/0e 171w/0e
2.6.1-rc2-mm1 0w/0e 0w/0e 149w/ 0e 12w/0e 6w/0e 171w/4e
2.6.1-rc1-mm2 0w/0e 0w/0e 157w/15e 12w/0e 3w/0e 185w/4e
2.6.1-rc1-mm1 0w/0e 0w/0e 156w/10e 12w/0e 3w/0e 184w/2e
2.6.0-mm2 0w/0e 0w/0e 161w/ 0e 12w/0e 3w/0e 189w/0e
2.6.0-mm1 0w/0e 0w/0e 173w/ 0e 12w/0e 3w/0e 212w/0e
Web page with links to complete details:
http://developer.osdl.org/cherry/compile/
John
On Wed, Jun 09, 2004 at 01:35:15PM -0300, Norberto Bensa wrote:
>Hello,
>
>Andrew Morton wrote:
>>
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc3/
2.6
>>.7-rc3-mm1/
>
> CC drivers/pci/msi.o
>drivers/pci/msi.c: In function `msi_address_init':
>drivers/pci/msi.c:265: error: invalid operands to binary <<
>make[2]: *** [drivers/pci/msi.o] Error 1
>make[1]: *** [drivers/pci] Error 2
>make: *** [drivers] Error 2
>
>The offending line is:
>
> msi_address->lo_address.value |= (MSI_TARGET_CPU <<
MSI_TARGET_CPU_SHIFT);
Somehow the change in TARGET_CPUS generated this error in UP
environment. Patch
below will fix it.
Thanks,
Long
------------------------------------------------------------------------
-----------
diff -urN linux-2.6.7-rc3-mm1/include/asm-i386/msi.h
2.6.7-rc3-mm1-fix/include/asm-i386/msi.h
--- linux-2.6.7-rc3-mm1/include/asm-i386/msi.h 2004-05-09
22:32:52.000000000 -0400
+++ 2.6.7-rc3-mm1-fix/include/asm-i386/msi.h 2004-06-09
17:21:07.000000000 -0400
@@ -16,7 +16,7 @@
#ifdef CONFIG_SMP
#define MSI_TARGET_CPU logical_smp_processor_id()
#else
-#define MSI_TARGET_CPU TARGET_CPUS
+#define MSI_TARGET_CPU cpu_to_logical_apicid(first_cpu(cpu_online_map))
#endif
#endif /* ASM_MSI_H */
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc3/2.6.7-rc3-mm1/
>
Could not compile with CONFIG_X86_IO_APIC=y. Function call to
(undefined) mp_register_gsi in arch/i386/kernel/acpi/boot.c is the problem.
Code in arch/i386/kernel/mpparse.c may be the appropriate function
definition (?).
- Phil
Phil Brunner <[email protected]> wrote:
>
> Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc3/2.6.7-rc3-mm1/
> >
> Could not compile with CONFIG_X86_IO_APIC=y. Function call to
> (undefined) mp_register_gsi in arch/i386/kernel/acpi/boot.c is the problem.
>
> Code in arch/i386/kernel/mpparse.c may be the appropriate function
> definition (?).
Today we fixed about 10^10^10 such bugs which people have been kindly
sending me (how hard is this? The compiler tells you!). This one is
probably solved. Please send me the .config.
Andrew Morton wrote:
>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc3/2.6.7-rc3-mm1/
>>
On Wed, Jun 09, 2004 at 07:10:24PM -0700, Phil Brunner wrote:
> Could not compile with CONFIG_X86_IO_APIC=y. Function call to
> (undefined) mp_register_gsi in arch/i386/kernel/acpi/boot.c is the problem.
> Code in arch/i386/kernel/mpparse.c may be the appropriate function
> definition (?).
Please apply the following 3 patches applied in order and run with them:
-- wli
William Lee Irwin III wrote:
> Could you test this?
Worked fine. Thanks!
Regards,
Norberto
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_KERNEL_IMAGE_BZIMAGE=y
# CONFIG_KERNEL_IMAGE_ZIMAGE is not set
# CONFIG_KERNEL_IMAGE_VMLINUX is not set
CONFIG_KERNEL_IMAGE="arch/i386/boot/bzImage"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
#
# Performance-monitoring counters support
#
CONFIG_PERFCTR=y
CONFIG_PERFCTR_INIT_TESTS=y
CONFIG_PERFCTR_VIRTUAL=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_DISK=y
CONFIG_PM_DISK_PARTITION="/dev/hda3"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_USE_VECTOR is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_RAW=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_DELAY=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Gigabit Ethernet (1000/10000 Mbit)
#
# CONFIG_NET_GIGE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I8XX_TCO=m
# CONFIG_SC1200_WDT is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_I810=m
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_GENESYS is not set
# CONFIG_USB_NET1080 is not set
# CONFIG_USB_PL2301 is not set
#
# Intelligent USB Devices/Gadgets
#
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_ZAURUS=y
# CONFIG_USB_CDCETHER is not set
#
# USB Network Adapters
#
# CONFIG_USB_AX8817X is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf-8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_SPINLINE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_KGDB is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set
CONFIG_SCHEDSTATS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=m
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_QSORT=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
On Thu, Jun 10, 2004 at 02:16:06PM +0900, Clemens Schwaighofer wrote:
> compile error in:
> drivers/perfctr/x86.c: In function `finalise_backpatching':
> drivers/perfctr/x86.c:1137: error: parse error before '{' token
> make[2]: *** [drivers/perfctr/x86.o] Error 1
> make[1]: *** [drivers/perfctr] Error 2
> make: *** [drivers] Error 2
> the kernel compiled fine with 2.6.7-rc2-mm2.
> config attached.
You will likely need other fixes, but...
Index: mm1-2.6.7-rc3/include/linux/cpumask.h
===================================================================
--- mm1-2.6.7-rc3.orig/include/linux/cpumask.h 2004-06-09 08:06:54.000000000 -0700
+++ mm1-2.6.7-rc3/include/linux/cpumask.h 2004-06-09 22:30:18.000000000 -0700
@@ -248,9 +248,9 @@
#endif
#define CPU_MASK_NONE \
-{ { \
+((cpumask_t) { { \
[0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \
-} }
+} })
#define cpus_addr(src) ((src).bits)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
William Lee Irwin III wrote:
| On Thu, Jun 10, 2004 at 02:16:06PM +0900, Clemens Schwaighofer wrote:
|
|>compile error in:
|>drivers/perfctr/x86.c: In function `finalise_backpatching':
|>drivers/perfctr/x86.c:1137: error: parse error before '{' token
|>make[2]: *** [drivers/perfctr/x86.o] Error 1
|>make[1]: *** [drivers/perfctr] Error 2
|>make: *** [drivers] Error 2
|>the kernel compiled fine with 2.6.7-rc2-mm2.
|>config attached.
|
|
| You will likely need other fixes, but...
That patch fixes it for me and I can boot without a problem
- --
Clemens Schwaighofer - IT Engineer & System Administration
==========================================================
TEQUILA\Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN
Tel: +81-(0)3-3545-7703 Fax: +81-(0)3-3545-7343
http://www.tequila.co.jp
==========================================================
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFAyAW5jBz/yQjBxz8RAnMhAKCOBxRrHh1syVCbo7Kk09N+wl53ywCeNl+K
MsClpNoaWw/31qA8vQQF/mE=
=uglM
-----END PGP SIGNATURE-----
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_KERNEL_IMAGE_BZIMAGE=y
# CONFIG_KERNEL_IMAGE_ZIMAGE is not set
# CONFIG_KERNEL_IMAGE_VMLINUX is not set
CONFIG_KERNEL_IMAGE="arch/i386/boot/bzImage"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
# CONFIG_M68K_TOOLCHAIN is not set
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set
CONFIG_ACPI_BOOT=y
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_USE_VECTOR is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
# CONFIG_EISA_VIRTUAL_ROOT is not set
CONFIG_EISA_NAMES=y
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_PCIE is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_MEGARAID=m
# CONFIG_SCSI_SATA is not set
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_CPQFCTS=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_SCSI_IZIP_EPP16=y
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_ISP=m
CONFIG_SCSI_QLOGIC_FC=m
CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SIM710 is not set
CONFIG_SCSI_SYM53C416=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
# CONFIG_IP_NF_MATCH_RECENT is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_PHYSDEV is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_ARP_MANGLE is not set
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IP_NF_RAW is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_HL is not set
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_AHESP is not set
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_IP6_NF_RAW is not set
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not set
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_SIOCGIFCONF is not set
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
# CONFIG_ULTRA32 is not set
CONFIG_SMC9194=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=m
CONFIG_NI52=m
CONFIG_NI65=m
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_AC3200=m
CONFIG_APRICOT=m
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_CS89x0=m
CONFIG_DGRS=m
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_E100_NAPI is not set
# CONFIG_LNE390 is not set
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
# CONFIG_TMD_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_SYNCLINK_SYNCPPP=m
CONFIG_HDLC=m
# CONFIG_HDLC_RAW is not set
# CONFIG_HDLC_RAW_ETH is not set
# CONFIG_HDLC_CISCO is not set
# CONFIG_HDLC_FR is not set
# CONFIG_HDLC_PPP is not set
# CONFIG_HDLC_X25 is not set
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300 is not set
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
CONFIG_QIC02_TAPE=m
# CONFIG_QIC02_DYNCONF is not set
#
# Edit configuration parameters in ./include/linux/tpqic02.h!
#
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
# CONFIG_ALIM1535_WDT is not set
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_WAFER_WDT=m
# CONFIG_I8XX_TCO is not set
CONFIG_SC1200_WDT=m
# CONFIG_SCx200_WDT is not set
CONFIG_60XX_WDT=m
# CONFIG_CPU5_WDT is not set
# CONFIG_W83627HF_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_MACHZ_WDT=m
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
CONFIG_WDT_501=y
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=m
# CONFIG_WDT_501_PCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240
#
# The compressor will be built as a module only!
#
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
# CONFIG_FT_PROC_FS is not set
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
#
# Hardware configuration
#
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
CONFIG_AGP=m
CONFIG_AGP_ALI=m
# CONFIG_AGP_ATI is not set
CONFIG_AGP_AMD=m
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
CONFIG_MWAVE=m
# CONFIG_RAW_DRIVER is not set
CONFIG_HANGCHECK_TIMER=m
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VX222 is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=m
# CONFIG_MIDI_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_AD1889 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y
#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y
#
# USB Network Adapters
#
# CONFIG_USB_AX8817X is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_TIGL=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
CONFIG_FRAME_POINTER=y
# CONFIG_4KSTACKS is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
CONFIG_CRC32=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
Andrew,
Do you recall why your i386-uninline-bitops.patch moves i386
find_next_bit() and find_next_zero_bit() out of line, but not
find_first_zero_bit() nor find_first_bit()?
Text sizes - i386 optimized routine (decimal):
find_next_zero_bit 132
find_next_bit 114
find_first_zero_bit 76
find_first_bit 50
Uninlining find_first_bit() reduces my i386 kernel text size by 1336 bytes.
Uninlining find_first_zero_bit() is good for another 208 bytes.
Eh - perhaps this is too small potatoes to worry about now.
Or perhaps there was good reason to leave them inline all along.
Perhaps someone else has further insight to the tradeoffs here, such as
a 'recommended size', above which most routines should be not inlined,
except in special cases.
--
I won't rest till it's the best ...
Programmer, Linux Scalability
Paul Jackson <[email protected]> 1.650.933.1373
Paul Jackson <[email protected]> wrote:
>
> Do you recall why your i386-uninline-bitops.patch moves i386
> find_next_bit() and find_next_zero_bit() out of line, but not
> find_first_zero_bit() nor find_first_bit()?
They're the two non-leaf functions - they expand other inlines and end up
quite big.
> Perhaps someone else has further insight to the tradeoffs here, such as
> a 'recommended size', above which most routines should be not inlined,
> except in special cases.
Hard call. Lots of hand-waving is involved.
Yes, an aggregate reduction in kernel text size is a good thing, but the
main reason for uninlining things is for performance: reduction of icache
footprint.
If an inline function is expanded several times in, say, fs/dcache.c then
it's a good candidate for uninlining, because it's probably the case that
all the expanded versions are in icache simultaneously. But if a function
is expanded once in ext2 and once in ext3 then it's less useful to uninline
it, because it is rare that two different filesystem drivers are in use
simultaneously.
Andrew wrote:
> Hard call. Lots of hand-waving is involved.
Ok ...
--
I won't rest till it's the best ...
Programmer, Linux Scalability
Paul Jackson <[email protected]> 1.650.933.1373
Paul Jackson <[email protected]> writes:
>
> Uninlining find_first_bit() reduces my i386 kernel text size by 1336 bytes.
Sounds attractive. I planned to uninline them for some time anyways
on x86-64, but that number makes it even more a good idea.
-Andi
Andi wrote:
> Paul Jackson <[email protected]> writes:
> >
> > Uninlining find_first_bit() reduces my i386 kernel text size by 1336 bytes.
>
> Sounds attractive.
It's fine by me if you push it for i386 as well. Or not.
My current focus is elsewhere.
--
I won't rest till it's the best ...
Programmer, Linux Scalability
Paul Jackson <[email protected]> 1.650.933.1373