>
> One of the entertaining things about NFORCE2 boxes is
> that their PCI interrupts are level/low in PIC mode
> and level/high in APIC mode.
>
> I've got an NFORCE2 box, and it works either way,
> including putting both ohci_hcd and eth0 on irq 11
> at level/low in PIC mode like yours.
>
> But in PIC mode I still get kernel: Disabling IRQ #7,
> so something isn't totally happy on this box.
>
> I recommend that you try IOAPIC mode.
>
>
yes i'm using it. there is my config in posted file too...
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y