Hi,
This makes serial core request resources when adding new ports if the
port isn't to be autoconfigured (UPF_BOOT_AUTOCONF is not set). This
also means the UPF_IOREMAP flag now works.
--- linux-2.6-armbe.orig/drivers/serial/serial_core.c 2004-09-23
15:04:08.000000000 +0100
+++ linux-2.6-armbe/drivers/serial/serial_core.c 2004-09-24
15:27:01.000000000 +0100
@@ -2007,7 +2007,8 @@
if (port->flags & UPF_BOOT_AUTOCONF) {
port->type = PORT_UNKNOWN;
port->ops->config_port(port, flags);
- }
+ } else
+ port->ops->request_port(port);
if (port->type != PORT_UNKNOWN) {
unsigned long flags;
David Vrabel
--
David Vrabel, Design Engineer
Arcom, Clifton Road Tel: +44 (0)1223 411200 ext. 3233
Cambridge CB1 7EA, UK Web: http://www.arcom.com/