System:
AMD Athlon Thunderbird 900MHz
MSI K7T Pro (VIA KT133 chipset)
Network card: Linksys LNE100TX Rev. 4.0 (tulip)
Kernel: 2.2.18 (with 0.92 Scyld drivers), 2.4.0, 2.4.1, 2.4.2, 2.4.2-ac11
With all the above kernel revisions/drivers, my network card hangs at random
(sometimes within minutes, other times it takes days). To restart it I need
to do an ifdown/ifup cycle and it will work fine until the next hang. I
upgraded to 2.4.2-ac11 because of the documented tulip fixes, but after a
few days got this again. The error log shows:
Mar 16 18:37:00 ulthar kernel: NETDEV WATCHDOG: eth0: transmit timed out
Mar 16 18:37:00 ulthar kernel: eth0: Transmit timed out, status fc664010,
CSR12
00000000, resetting...
ad infinitum until I do ifdown/ifup. The status & CSR12 values are always
the same. My card is detected as follows by the kernel:
Mar 12 21:38:49 ulthar kernel: Linux Tulip driver version 0.9.14c (March 3,
2001
)
Mar 12 21:38:49 ulthar kernel: PCI: Found IRQ 11 for device 00:0a.0
Mar 12 21:38:49 ulthar kernel: IRQ routing conflict in pirq table for device
00:
07.2
Mar 12 21:38:49 ulthar kernel: IRQ routing conflict in pirq table for device
00:
07.3
Mar 12 21:38:49 ulthar kernel: PCI: The same IRQ used for device 00:0e.0
Mar 12 21:38:49 ulthar kernel: eth0: ADMtek Comet rev 17 at 0xdc00,
00:20:78:0D:
D2:E1, IRQ 11.
Any ideas on why this might be happening?
--
Manuel A. McLure - Unify Corp. Technical Support <[email protected]>
Space Ghost: "Hey, what happened to the-?" Moltar: "It's out." SG: "What
about-?" M: "It's fixed." SG: "Eh, good. Good."
"Manuel A. McLure" wrote:
>
> System:
> AMD Athlon Thunderbird 900MHz
> MSI K7T Pro (VIA KT133 chipset)
> Network card: Linksys LNE100TX Rev. 4.0 (tulip)
> Kernel: 2.2.18 (with 0.92 Scyld drivers), 2.4.0, 2.4.1, 2.4.2, 2.4.2-ac11
>
> With all the above kernel revisions/drivers, my network card hangs at random
> (sometimes within minutes, other times it takes days). To restart it I need
> to do an ifdown/ifup cycle and it will work fine until the next hang. I
> upgraded to 2.4.2-ac11 because of the documented tulip fixes, but after a
> few days got this again. The error log shows:
In Alan Cox terms, that's a long time ago :)
Can you please try 2.4.2-ac20? It includes fixes specifically for this
problem.
--
Jeff Garzik | May you have warm words on a cold evening,
Building 1024 | a full mooon on a dark night,
MandrakeSoft | and a smooth road all the way to your door.
On Tuesday 20 March 2001 14:58, Jeff Garzik wrote:
> > With all the above kernel revisions/drivers, my network card
> > hangs at random (sometimes within minutes, other times it takes
> > days). To restart it I need to do an ifdown/ifup cycle and it
> > will work fine until the next hang. I upgraded to 2.4.2-ac11
> > because of the documented tulip fixes, but after a few days got
> > this again. The error log shows:
>
> In Alan Cox terms, that's a long time ago :)
>
> Can you please try 2.4.2-ac20? It includes fixes specifically for
> this problem.
I started having the same problem with my LNE100TX and switched it
out with another LNE100TX and had the same problem. Figured it was
my BP6 SMP motherboard and ordered a new computer. Doh. :-)
Using 2.4.2-ac20.
Current LNE100TX having problems (other is different Rev):
Lite-On Communications Inc LNE100TX (rev 20)
The first card would get "unexpected IRQ trap at vector d0" before
dying whereas the second one didn't give that indication. It would
just freeze and the traditional "NETDEV WATCHDOG: eth0: transmit
timed out" message.