This is the start of the stable review cycle for the 4.14.244 release.
There are 42 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun, 15 Aug 2021 15:05:12 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.244-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.244-rc1
YueHaibing <[email protected]>
net: xilinx_emaclite: Do not print real IOMEM pointer
Miklos Szeredi <[email protected]>
ovl: prevent private clone if bind mount is not allowed
Pali Rohár <[email protected]>
ppp: Fix generating ppp unit id when ifname is not specified
Longfang Liu <[email protected]>
USB:ehci:fix Kunpeng920 ehci hardware problem
Letu Ren <[email protected]>
net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset
Prarit Bhargava <[email protected]>
alpha: Send stop IPI to send to online CPUs
Shreyansh Chouhan <[email protected]>
reiserfs: check directory items on read from disk
Yu Kuai <[email protected]>
reiserfs: add check for root_inode in reiserfs_fill_super
Christoph Hellwig <[email protected]>
libata: fix ata_pio_sector for CONFIG_HIGHMEM
Reinhard Speyerer <[email protected]>
qmi_wwan: add network device usage statistics for qmimux devices
Like Xu <[email protected]>
perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest
Dongliang Mu <[email protected]>
spi: meson-spicc: fix memory leak in meson_spicc_remove
Zheyu Ma <[email protected]>
pcmcia: i82092: fix a null pointer dereference bug
Maciej W. Rozycki <[email protected]>
MIPS: Malta: Do not byte-swap accesses to the CBUS UART
Maciej W. Rozycki <[email protected]>
serial: 8250: Mask out floating 16/32-bit bus bits
Theodore Ts'o <[email protected]>
ext4: fix potential htree corruption when growing large_dir directories
Alex Xu (Hello71) <[email protected]>
pipe: increase minimum default pipe size to 2 pages
Johan Hovold <[email protected]>
media: rtl28xxu: fix zero-length control request
Xiangyang Zhang <[email protected]>
staging: rtl8723bs: Fix a resource leak in sd_int_dpc
Hui Su <[email protected]>
scripts/tracing: fix the bug that can't parse raw_trace_func
Dmitry Osipenko <[email protected]>
usb: otg-fsm: Fix hrtimer list corruption
Maxim Devaev <[email protected]>
usb: gadget: f_hid: idle uses the highest byte for duration
Phil Elwell <[email protected]>
usb: gadget: f_hid: fixed NULL pointer dereference
Maxim Devaev <[email protected]>
usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
David Bauer <[email protected]>
USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
Willy Tarreau <[email protected]>
USB: serial: ch341: fix character loss at high transfer rates
Daniele Palmas <[email protected]>
USB: serial: option: add Telit FD980 composition 0x1056
Qiang.zhang <[email protected]>
USB: usbtmc: Fix RCU stall warning
Tetsuo Handa <[email protected]>
Bluetooth: defer cleanup of resources in hci_unregister_dev()
Pavel Skripkin <[email protected]>
net: vxge: fix use-after-free in vxge_device_unregister
Pavel Skripkin <[email protected]>
net: fec: fix use-after-free in fec_drv_remove
Pavel Skripkin <[email protected]>
net: pegasus: fix uninit-value in get_interrupt_interval
Dan Carpenter <[email protected]>
bnx2x: fix an error code in bnx2x_nic_load()
H. Nikolaus Schaller <[email protected]>
mips: Fix non-POSIX regexp
Fei Qin <[email protected]>
nfp: update ethtool reporting of pauseframe control
Wang Hai <[email protected]>
net: natsemi: Fix missing pci_disable_device() in probe and remove
Hans Verkuil <[email protected]>
media: videobuf2-core: dequeue if start_streaming fails
Li Manyi <[email protected]>
scsi: sr: Return correct event when media event code is 3
H. Nikolaus Schaller <[email protected]>
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
Dario Binacchi <[email protected]>
clk: stm32f4: fix post divisor setup for I2S/SAI PLLs
Takashi Iwai <[email protected]>
ALSA: seq: Fix racy deletion of subscriber
Rafael J. Wysocki <[email protected]>
Revert "ACPICA: Fix memory leak caused by _CID repair function"
-------------
Diffstat:
Makefile | 4 +-
arch/alpha/kernel/smp.c | 2 +-
arch/arm/boot/dts/omap5-board-common.dtsi | 9 +--
arch/mips/Makefile | 2 +-
arch/mips/mti-malta/malta-platform.c | 3 +-
arch/x86/events/perf_event.h | 3 +-
drivers/acpi/acpica/nsrepair2.c | 7 --
drivers/ata/libata-sff.c | 35 +++++++---
drivers/clk/clk-stm32f4.c | 10 +--
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 11 +++-
drivers/media/v4l2-core/videobuf2-core.c | 13 +++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +-
drivers/net/ethernet/freescale/fec_main.c | 2 +-
drivers/net/ethernet/natsemi/natsemi.c | 8 +--
drivers/net/ethernet/neterion/vxge/vxge-main.c | 6 +-
.../net/ethernet/netronome/nfp/nfp_net_ethtool.c | 2 +
drivers/net/ethernet/qlogic/qla3xxx.c | 6 +-
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 5 +-
drivers/net/ppp/ppp_generic.c | 19 ++++--
drivers/net/usb/pegasus.c | 14 +++-
drivers/net/usb/qmi_wwan.c | 76 ++++++++++++++++++++--
drivers/pcmcia/i82092.c | 1 +
drivers/scsi/sr.c | 2 +-
drivers/spi/spi-meson-spicc.c | 2 +
drivers/staging/rtl8723bs/hal/sdio_ops.c | 2 +
drivers/tty/serial/8250/8250_port.c | 12 +++-
drivers/usb/class/usbtmc.c | 8 +--
drivers/usb/common/usb-otg-fsm.c | 6 +-
drivers/usb/gadget/function/f_hid.c | 44 +++++++++++--
drivers/usb/host/ehci-pci.c | 3 +
drivers/usb/serial/ch341.c | 1 +
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 3 +
drivers/usb/serial/option.c | 2 +
fs/ext4/namei.c | 2 +-
fs/namespace.c | 42 ++++++++----
fs/pipe.c | 19 +++++-
fs/reiserfs/stree.c | 31 +++++++--
fs/reiserfs/super.c | 8 +++
include/linux/usb/otg-fsm.h | 1 +
include/net/bluetooth/hci_core.h | 1 +
net/bluetooth/hci_core.c | 16 ++---
net/bluetooth/hci_sock.c | 49 +++++++++-----
net/bluetooth/hci_sysfs.c | 3 +
scripts/tracing/draw_functrace.py | 6 +-
sound/core/seq/seq_ports.c | 39 +++++++----
46 files changed, 400 insertions(+), 144 deletions(-)
From: H. Nikolaus Schaller <[email protected]>
[ Upstream commit 28bbbb9875a35975904e46f9b06fa689d051b290 ]
When cross compiling a MIPS kernel on a BSD based HOSTCC leads
to errors like
SYNC include/config/auto.conf.cmd - due to: .config
egrep: empty (sub)expression
UPD include/config/kernel.release
HOSTCC scripts/dtc/dtc.o - due to target missing
It turns out that egrep uses this egrep pattern:
(|MINOR_|PATCHLEVEL_)
This is not valid syntax or gives undefined results according
to POSIX 9.5.3 ERE Grammar
https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html
It seems to be silently accepted by the Linux egrep implementation
while a BSD host complains.
Such patterns can be replaced by a transformation like
"(|p1|p2)" -> "(p1|p2)?"
Fixes: 48c35b2d245f ("[MIPS] There is no __GNUC_MAJOR__")
Signed-off-by: H. Nikolaus Schaller <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index a4a06d173858..1190e6f75d4b 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -314,7 +314,7 @@ LDFLAGS += -m $(ld-emul)
ifdef CONFIG_MIPS
CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
- egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
+ egrep -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
ifdef CONFIG_64BIT
CHECKFLAGS += -m64
--
2.30.2
From: Xiangyang Zhang <[email protected]>
commit 990e4ad3ddcb72216caeddd6e62c5f45a21e8121 upstream.
The "c2h_evt" variable is not freed when function call
"c2h_evt_read_88xx" failed
Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Xiangyang Zhang <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/rtl8723bs/hal/sdio_ops.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/staging/rtl8723bs/hal/sdio_ops.c
+++ b/drivers/staging/rtl8723bs/hal/sdio_ops.c
@@ -1118,6 +1118,8 @@ void sd_int_dpc(struct adapter *padapter
} else {
rtw_c2h_wk_cmd(padapter, (u8 *)c2h_evt);
}
+ } else {
+ kfree(c2h_evt);
}
} else {
/* Error handling for malloc fail */
From: Takashi Iwai <[email protected]>
commit 97367c97226aab8b298ada954ce12659ee3ad2a4 upstream.
It turned out that the current implementation of the port subscription
is racy. The subscription contains two linked lists, and we have to
add to or delete from both lists. Since both connection and
disconnection procedures perform the same order for those two lists
(i.e. src list, then dest list), when a deletion happens during a
connection procedure, the src list may be deleted before the dest list
addition completes, and this may lead to a use-after-free or an Oops,
even though the access to both lists are protected via mutex.
The simple workaround for this race is to change the access order for
the disconnection, namely, dest list, then src list. This assures
that the connection has been established when disconnecting, and also
the concurrent deletion can be avoided.
Reported-and-tested-by: folkert <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/seq/seq_ports.c | 39 +++++++++++++++++++++++++++------------
1 file changed, 27 insertions(+), 12 deletions(-)
--- a/sound/core/seq/seq_ports.c
+++ b/sound/core/seq/seq_ports.c
@@ -532,10 +532,11 @@ static int check_and_subscribe_port(stru
return err;
}
-static void delete_and_unsubscribe_port(struct snd_seq_client *client,
- struct snd_seq_client_port *port,
- struct snd_seq_subscribers *subs,
- bool is_src, bool ack)
+/* called with grp->list_mutex held */
+static void __delete_and_unsubscribe_port(struct snd_seq_client *client,
+ struct snd_seq_client_port *port,
+ struct snd_seq_subscribers *subs,
+ bool is_src, bool ack)
{
struct snd_seq_port_subs_info *grp;
struct list_head *list;
@@ -543,7 +544,6 @@ static void delete_and_unsubscribe_port(
grp = is_src ? &port->c_src : &port->c_dest;
list = is_src ? &subs->src_list : &subs->dest_list;
- down_write(&grp->list_mutex);
write_lock_irq(&grp->list_lock);
empty = list_empty(list);
if (!empty)
@@ -553,6 +553,18 @@ static void delete_and_unsubscribe_port(
if (!empty)
unsubscribe_port(client, port, grp, &subs->info, ack);
+}
+
+static void delete_and_unsubscribe_port(struct snd_seq_client *client,
+ struct snd_seq_client_port *port,
+ struct snd_seq_subscribers *subs,
+ bool is_src, bool ack)
+{
+ struct snd_seq_port_subs_info *grp;
+
+ grp = is_src ? &port->c_src : &port->c_dest;
+ down_write(&grp->list_mutex);
+ __delete_and_unsubscribe_port(client, port, subs, is_src, ack);
up_write(&grp->list_mutex);
}
@@ -608,27 +620,30 @@ int snd_seq_port_disconnect(struct snd_s
struct snd_seq_client_port *dest_port,
struct snd_seq_port_subscribe *info)
{
- struct snd_seq_port_subs_info *src = &src_port->c_src;
+ struct snd_seq_port_subs_info *dest = &dest_port->c_dest;
struct snd_seq_subscribers *subs;
int err = -ENOENT;
- down_write(&src->list_mutex);
+ /* always start from deleting the dest port for avoiding concurrent
+ * deletions
+ */
+ down_write(&dest->list_mutex);
/* look for the connection */
- list_for_each_entry(subs, &src->list_head, src_list) {
+ list_for_each_entry(subs, &dest->list_head, dest_list) {
if (match_subs_info(info, &subs->info)) {
- atomic_dec(&subs->ref_count); /* mark as not ready */
+ __delete_and_unsubscribe_port(dest_client, dest_port,
+ subs, false,
+ connector->number != dest_client->number);
err = 0;
break;
}
}
- up_write(&src->list_mutex);
+ up_write(&dest->list_mutex);
if (err < 0)
return err;
delete_and_unsubscribe_port(src_client, src_port, subs, true,
connector->number != src_client->number);
- delete_and_unsubscribe_port(dest_client, dest_port, subs, false,
- connector->number != dest_client->number);
kfree(subs);
return 0;
}
From: Johan Hovold <[email protected]>
commit 76f22c93b209c811bd489950f17f8839adb31901 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
The driver uses a zero-length i2c-read request for type detection so
update the control-request code to use usb_sndctrlpipe() in this case.
Note that actually trying to read the i2c register in question does not
work as the register might not exist (e.g. depending on the demodulator)
as reported by Eero Lehtinen <[email protected]>.
Reported-by: [email protected]
Reported-by: Eero Lehtinen <[email protected]>
Tested-by: Eero Lehtinen <[email protected]>
Fixes: d0f232e823af ("[media] rtl28xxu: add heuristic to detect chip type")
Cc: [email protected] # 4.0
Cc: Antti Palosaari <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -50,7 +50,16 @@ static int rtl28xxu_ctrl_msg(struct dvb_
} else {
/* read */
requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
- pipe = usb_rcvctrlpipe(d->udev, 0);
+
+ /*
+ * Zero-length transfers must use usb_sndctrlpipe() and
+ * rtl28xxu_identify_state() uses a zero-length i2c read
+ * command to determine the chip type.
+ */
+ if (req->size)
+ pipe = usb_rcvctrlpipe(d->udev, 0);
+ else
+ pipe = usb_sndctrlpipe(d->udev, 0);
}
ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value,
From: Hui Su <[email protected]>
commit 1c0cec64a7cc545eb49f374a43e9f7190a14defa upstream.
Since commit 77271ce4b2c0 ("tracing: Add irq, preempt-count and need resched info
to default trace output"), the default trace output format has been changed to:
<idle>-0 [009] d.h. 22420.068695: _raw_spin_lock_irqsave <-hrtimer_interrupt
<idle>-0 [000] ..s. 22420.068695: _nohz_idle_balance <-run_rebalance_domains
<idle>-0 [011] d.h. 22420.068695: account_process_tick <-update_process_times
origin trace output format:(before v3.2.0)
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule
migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule
migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule
The draw_functrace.py(introduced in v2.6.28) can't parse the new version format trace_func,
So we need modify draw_functrace.py to adapt the new version trace output format.
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 77271ce4b2c0 tracing: Add irq, preempt-count and need resched info to default trace output
Signed-off-by: Hui Su <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
scripts/tracing/draw_functrace.py | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/scripts/tracing/draw_functrace.py
+++ b/scripts/tracing/draw_functrace.py
@@ -17,7 +17,7 @@ Usage:
$ cat /sys/kernel/debug/tracing/trace_pipe > ~/raw_trace_func
Wait some times but not too much, the script is a bit slow.
Break the pipe (Ctrl + Z)
- $ scripts/draw_functrace.py < raw_trace_func > draw_functrace
+ $ scripts/tracing/draw_functrace.py < ~/raw_trace_func > draw_functrace
Then you have your drawn trace in draw_functrace
"""
@@ -103,10 +103,10 @@ def parseLine(line):
line = line.strip()
if line.startswith("#"):
raise CommentLineException
- m = re.match("[^]]+?\\] +([0-9.]+): (\\w+) <-(\\w+)", line)
+ m = re.match("[^]]+?\\] +([a-z.]+) +([0-9.]+): (\\w+) <-(\\w+)", line)
if m is None:
raise BrokenLineException
- return (m.group(1), m.group(2), m.group(3))
+ return (m.group(2), m.group(3), m.group(4))
def main():
From: Maxim Devaev <[email protected]>
commit afcff6dc690e24d636a41fd4bee6057e7c70eebd upstream.
The USB HID standard declares mandatory support for GET_IDLE and SET_IDLE
requests for Boot Keyboard. Most hosts can handle their absence, but others
like some old/strange UEFIs and BIOSes consider this a critical error
and refuse to work with f_hid.
This primitive implementation of saving and returning idle is sufficient
to meet the requirements of the standard and these devices.
Acked-by: Felipe Balbi <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Maxim Devaev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_hid.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -45,6 +45,7 @@ struct f_hidg {
unsigned char bInterfaceSubClass;
unsigned char bInterfaceProtocol;
unsigned char protocol;
+ unsigned char idle;
unsigned short report_desc_length;
char *report_desc;
unsigned short report_length;
@@ -533,6 +534,14 @@ static int hidg_setup(struct usb_functio
goto respond;
break;
+ case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+ | HID_REQ_GET_IDLE):
+ VDBG(cdev, "get_idle\n");
+ length = min_t(unsigned int, length, 1);
+ ((u8 *) req->buf)[0] = hidg->idle;
+ goto respond;
+ break;
+
case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
| HID_REQ_SET_REPORT):
VDBG(cdev, "set_report | wLength=%d\n", ctrl->wLength);
@@ -556,6 +565,14 @@ static int hidg_setup(struct usb_functio
goto stall;
break;
+ case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
+ | HID_REQ_SET_IDLE):
+ VDBG(cdev, "set_idle\n");
+ length = 0;
+ hidg->idle = value;
+ goto respond;
+ break;
+
case ((USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_INTERFACE) << 8
| USB_REQ_GET_DESCRIPTOR):
switch (value >> 8) {
@@ -783,6 +800,7 @@ static int hidg_bind(struct usb_configur
hidg_interface_desc.bInterfaceSubClass = hidg->bInterfaceSubClass;
hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol;
hidg->protocol = HID_REPORT_PROTOCOL;
+ hidg->idle = 1;
hidg_ss_in_ep_desc.wMaxPacketSize = cpu_to_le16(hidg->report_length);
hidg_ss_in_comp_desc.wBytesPerInterval =
cpu_to_le16(hidg->report_length);
From: H. Nikolaus Schaller <[email protected]>
[ Upstream commit c68ef4ad180e09805fa46965d15e1dfadf09ffa5 ]
This device tree include file describes a fixed-regulator
connecting smps7_reg output (1.8V) to some 1.8V rail and
consumers (vdds_1v8_main).
This regulator does not physically exist.
I assume it was introduced as a wrapper around smps7_reg
to provide a speaking signal name "vdds_1v8_main" as label.
This fixed-regulator without real function was not an issue
in driver code until
Commit 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators")
introduced a new check for regulator initialization which
makes Palmas regulator registration fail:
[ 5.407712] ldo1: supplied by vsys_cobra
[ 5.412748] ldo2: supplied by vsys_cobra
[ 5.417603] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
The reason is that the supply-chain of regulators is too
long and goes from ldo3 through the virtual vdds_1v8_main
regulator and then back to smps7. This adds a cross-dependency
of probing Palmas regulators and the fixed-regulator which
leads to probe deferral by the new check and is no longer
resolved.
Since we do not control what device tree files including this
one reference (either &vdds_1v8_main or &smps7_reg or both)
we keep both labels for smps7 for compatibility.
Fixes: 98e48cd9283d ("regulator: core: resolve supply for boot-on/always-on regulators")
Signed-off-by: H. Nikolaus Schaller <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap5-board-common.dtsi | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index c58f14de0145..7d1877c9c361 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -29,14 +29,6 @@
regulator-max-microvolt = <5000000>;
};
- vdds_1v8_main: fixedregulator-vdds_1v8_main {
- compatible = "regulator-fixed";
- regulator-name = "vdds_1v8_main";
- vin-supply = <&smps7_reg>;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
vmmcsd_fixed: fixedregulator-mmcsd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
@@ -482,6 +474,7 @@
regulator-boot-on;
};
+ vdds_1v8_main:
smps7_reg: smps7 {
/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
regulator-name = "smps7";
--
2.30.2
On Fri, 13 Aug 2021 at 20:41, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.244 release.
> There are 42 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 15 Aug 2021 15:05:12 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.244-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 4.14.244-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-4.14.y
* git commit: 075e1c248317223f321e3f13377e1fd6d2d7ee84
* git describe: v4.14.243-43-g075e1c248317
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.243-43-g075e1c248317
## No regressions (compared to v4.14.243-39-g7d5ea050a415)
## No fixes (compared to v4.14.243-39-g7d5ea050a415)
## Test result summary
total: 73624, pass: 58097, fail: 677, skip: 12835, xfail: 2015
## Build Summary
* arm: 98 total, 98 passed, 0 failed
* arm64: 25 total, 25 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 15 total, 15 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 36 total, 36 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 15 total, 15 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
On Fri, Aug 13, 2021 at 05:06:26PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.244 release.
> There are 42 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 15 Aug 2021 15:05:12 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 168 pass: 168 fail: 0
Qemu test results:
total: 421 pass: 421 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On 2021/8/13 23:06, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.244 release.
> There are 42 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 15 Aug 2021 15:05:12 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.244-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on x86 for 4.14.244-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.14.y
Version: 4.14.244-rc1
Commit: 075e1c248317223f321e3f13377e1fd6d2d7ee84
Compiler: gcc version 7.3.0 (GCC)
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8837
passed: 8837
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <[email protected]>