Hi,
I am unable to use my USB Agfa Snapscan 1212_U scanner, with kernel
2.6.8.1 or 2.6.10 (both compiled by myself from http://www.kernel.org sources)
and xsane 0.96-1 (Debian).
It worked with kernel 2.6.7.
When I use VMware, I'm able to use it though (in Windows), whatever
linux kernel I use.
When I start xsane, I get "error opening device
'snapscan:libusb:001:004': I/O error on device" or simply "no device
found" if I restart xsane after the first error message (or sometimes at
first start).
Sometimes it gets further and when I try to acquire preview, I get "I/O
error" and the following in /var/log/syslog :
Feb 11 23:19:00 babs1 kernel: ohci_hcd 0000:00:02.2: urb c15e13e0 path
1.3 ep1in 82160000 cc 8 --> status -75
or this :
ohci_hcd 0000:00:02.2 urb c15e1460 path 1.3 ep1in 82160000 cc8 -->
status -75
Scanner is correctly found by sane-find-scanner. It seems that it
changes port every time.
Thank you very much for any hint. What could I do since my .config
contains CONFIG_USB_DEBUG=y ? Enabling debugging for xscanimage doesn't
help.
Barbara
-------------------------------------------------------------------
$ lsmod
Module Size Used by
ohci_hcd 32584 0
sr_mod 13860 0
sd_mod 12368 0
radeon 129060 0
vmnet 28124 2
vmmon 153132 0
ipt_REJECT 5568 0
ipt_limit 1920 0
ipt_LOG 6208 0
ipt_MASQUERADE 2688 0
ipt_state 1472 0
iptable_mangle 2176 0
iptable_nat 23368 1 ipt_MASQUERADE
ip_conntrack 40308 3 ipt_MASQUERADE,ipt_state,iptable_nat
iptable_filter 2944 0
ip_tables 16320 8
ipt_REJECT,ipt_limit,ipt_LOG,ipt_MASQUERADE,ipt_state,iptable_mangle,iptable_nat,iptable_filter
i2c_sis96x 4484 0
it87 21156 0
i2c_sensor 2880 1 it87
i2c_isa 1664 0
snd_pcm_oss 55716 0
snd_mixer_oss 18944 1 snd_pcm_oss
apm 18092 0
Note : vmnet and vmmon are VMware modules, they never bothered. I have
the same error when vmware service is stopped and they are unloaded.
-------------------------------------------------------------------
Here are lenghty log files that may help.
---------------------------------------------------------------------
Powering on scanner (usb hub unplugged, unloading ohci-hid module first):
Feb 11 23:55:53 babs1 kernel: ohci_hcd 0000:00:02.3: wakeup
Feb 11 23:55:53 babs1 kernel: hub 2-0:1.0: state 5 ports 3 chg fff8 evt 0002
Feb 11 23:55:53 babs1 kernel: ohci_hcd 0000:00:02.3: GetStatus
roothub.portstatus [0] = 0x00010101 CSC PPS CCS
Feb 11 23:55:53 babs1 kernel: hub 2-0:1.0: port 1, status 0101, change
0001, 12 Mb/s
Feb 11 23:55:53 babs1 kernel: hub 2-0:1.0: debounce: port 1: total 100ms
stable 100ms status 0x101
Feb 11 23:55:53 babs1 kernel: ohci_hcd 0000:00:02.3: GetStatus
roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Feb 11 23:55:53 babs1 kernel: usb 2-1: new full speed USB device using
ohci_hcd and address 2
Feb 11 23:55:53 babs1 kernel: ohci_hcd 0000:00:02.3: GetStatus
roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Feb 11 23:55:53 babs1 kernel: usb 2-1: ep0 maxpacket = 8
Feb 11 23:55:53 babs1 kernel: usb 2-1: new device strings: Mfr=1,
Product=2, SerialNumber=0
Feb 11 23:55:53 babs1 kernel: usb 2-1: default language 0x0409
Feb 11 23:55:53 babs1 kernel: usb 2-1: Product: SNAPSCAN
Feb 11 23:55:53 babs1 kernel: usb 2-1: Manufacturer: AGFA
Feb 11 23:55:53 babs1 kernel: usb 2-1: hotplug
Feb 11 23:55:53 babs1 usb.agent[6641]: libusbscanner: loaded
successfully
Feb 11 23:55:53 babs1 kernel: usb 2-1: adding 2-1:1.0 (config #1,
interface 0)
Feb 11 23:55:53 babs1 kernel: usb 2-1:1.0: hotplug
-----------------------------------------------------------------------
Powering on scanner (plugged on usb hub):
Feb 11 23:27:56 babs1 kernel: hub 1-1:1.0: state 5 ports 4 chg fff0 evt 0008
Feb 11 23:27:56 babs1 kernel: hub 1-1:1.0: port 3, status 0100, change
0001, 12Mb/s
Feb 11 23:27:56 babs1 kernel: usb 1-1.3: USB disconnect, address 3
Feb 11 23:27:56 babs1 kernel: usb 1-1.3: usb_disable_device nuking all URBs
Feb 11 23:27:56 babs1 kernel: usb 1-1.3: unregistering interface 1-1.3:1.0
Feb 11 23:27:56 babs1 kernel: usb 1-1.3:1.0: hotplug
Feb 11 23:27:56 babs1 kernel: usb 1-1.3: unregistering device
Feb 11 23:27:56 babs1 kernel: usb 1-1.3: hotplug
Feb 11 23:27:56 babs1 kernel: hub 1-1:1.0: debounce: port 3: total 100ms
stable100ms status 0x100
Feb 11 23:34:56 babs1 kernel: hub 1-1:1.0: state 5 ports 4 chg fff0 evt 0008
Feb 11 23:34:56 babs1 kernel: hub 1-1:1.0: port 3, status 0101, change
0001, 12Mb/s
Feb 11 23:34:56 babs1 kernel: hub 1-1:1.0: debounce: port 3: total 100ms
stable100ms status 0x101
Feb 11 23:34:56 babs1 kernel: usb 1-1.3: new full speed USB device using
ohci_hcd and address 4
Feb 11 23:34:56 babs1 kernel: usb 1-1.3: ep0 maxpacket = 8
Feb 11 23:34:56 babs1 kernel: usb 1-1.3: new device strings: Mfr=1,
Product=2, SerialNumber=0
Feb 11 23:34:56 babs1 kernel: usb 1-1.3: default language 0x0409
Feb 11 23:34:56 babs1 kernel: usb 1-1.3: Product: SNAPSCAN
Feb 11 23:34:56 babs1 kernel: usb 1-1.3: Manufacturer: AGFA
Feb 11 23:34:56 babs1 kernel: usb 1-1.3: hotplug
Feb 11 23:34:56 babs1 kernel: usb 1-1.3: adding 1-1.3:1.0 (config #1,
interface0)
Feb 11 23:34:56 babs1 kernel: usb 1-1.3:1.0: hotplug
Feb 11 23:34:57 babs1 usb.agent[30255]: libusbscanner: loaded
successfully
-----------------------------------------------------------------------
Restarting hotplug with scanner on a standalone USB port (no usb hub):
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: remove, state 1
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: roothub graceful
disconnect
Feb 11 23:48:23 babs1 kernel: usb usb1: USB disconnect, address 1
Feb 11 23:48:23 babs1 kernel: usb usb1: usb_disable_device nuking all URBs
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: shutdown urb
d775be60 pipe 4040818
0 ep1in-intr
Feb 11 23:48:23 babs1 kernel: usb usb1: unregistering interface 1-0:1.0
Feb 11 23:48:23 babs1 kernel: usb 1-0:1.0: hotplug
Feb 11 23:48:23 babs1 kernel: usb usb1: unregistering device
Feb 11 23:48:23 babs1 kernel: usb usb1: hotplug
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: stop suspend
controller (state 0x8
5)
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: OHCI controller state
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: OHCI 1.0, with
legacy support regi
sters
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: control 0x6c3 RWE
RWC HCFS=suspend
CBSR=3
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: cmdstatus 0x00000 SOC=0
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: intrstatus 0x00000000
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: intrenable
0x8000000a MIE RD WDH
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: hcca frame #0269
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.a 01000203
POTPGT=1 NPS ND
P=3
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.b 00000000
PPCM=0000 DR=00
00
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.status
00008000 DRWE
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[0] 0x00000100
PPS
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[1] 0x00000100
PPS
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[2] 0x00000100
PPS
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.2: USB bus 1 deregistered
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: remove, state 1
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: roothub graceful
disconnect
Feb 11 23:48:23 babs1 kernel: usb usb2: USB disconnect, address 1
Feb 11 23:48:23 babs1 kernel: usb 2-1: USB disconnect, address 2
Feb 11 23:48:23 babs1 kernel: usb 2-1: usb_disable_device nuking all URBs
Feb 11 23:48:23 babs1 kernel: usb 2-1: unregistering interface 2-1:1.0
Feb 11 23:48:23 babs1 kernel: usb 2-1:1.0: hotplug
Feb 11 23:48:23 babs1 kernel: usb 2-1: unregistering device
Feb 11 23:48:23 babs1 kernel: usb 2-1: hotplug
Feb 11 23:48:23 babs1 kernel: usb usb2: usb_disable_device nuking all URBs
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: shutdown urb
d775bce0 pipe 4040818
0 ep1in-intr
Feb 11 23:48:23 babs1 kernel: usb usb2: unregistering interface 2-0:1.0
Feb 11 23:48:23 babs1 kernel: usb 2-0:1.0: hotplug
Feb 11 23:48:23 babs1 kernel: usb usb2: unregistering device
Feb 11 23:48:23 babs1 kernel: usb usb2: hotplug
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: stop operational
controller (state
0x85)
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: OHCI controller state
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: OHCI 1.0, with
legacy support regi
sters
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: control 0x283 RWC
HCFS=operational
CBSR=3
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: cmdstatus 0x00000 SOC=0
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: intrstatus
0x00000004 SF
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: intrenable
0x8000000a MIE RD WDH
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: ed_controlhead 1a36a000
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: hcca frame #6bdf
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.a 01000203
POTPGT=1 NPS ND
P=3
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.b 00000000
PPCM=0000 DR=00
00
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.status
00008000 DRWE
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[0] 0x00000103
PPS PES CCS
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[1] 0x00000100
PPS
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[2] 0x00000100
PPS
Feb 11 23:48:23 babs1 kernel: ohci_hcd 0000:00:02.3: USB bus 2 deregistered
Feb 11 23:48:24 babs1 pci.agent[3426]: i2c-sis96x: already loaded
Feb 11 23:48:24 babs1 kernel: ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host
Controller (OHC
I) Driver (PCI)
Feb 11 23:48:24 babs1 kernel: ohci_hcd: block sizes: ed 64 td 64
Feb 11 23:48:24 babs1 kernel: PCI: Found IRQ 11 for device 0000:00:02.2
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: Silicon Integrated
Systems [SiS] U
SB 1.0 Controller
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: irq 11, pci mem
0xcfffe000
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: new USB bus
registered, assigned b
us number 1
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: resetting from
state 'reset', cont
rol = 0x200
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: enabling initreset
quirk
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: OHCI controller state
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: OHCI 1.0, with
legacy support regi
sters
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: control 0x283 RWC
HCFS=operational
CBSR=3
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: cmdstatus 0x00000 SOC=0
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: intrstatus
0x00000004 SF
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: intrenable
0x8000000a MIE RD WDH
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: hcca frame #0003
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.a 01000203
POTPGT=1 NPS ND
P=3
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.b 00000000
PPCM=0000 DR=00
00
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.status
00008000 DRWE
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[0] 0x00000100
PPS
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[1] 0x00000100
PPS
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[2] 0x00000100
PPS
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: supports USB remote
wakeup
eb 11 23:48:24 babs1 kernel: usb usb1: new device strings: Mfr=3,
Product=2, SerialNum
ber=1
Feb 11 23:48:24 babs1 kernel: usb usb1: default language 0x0409
Feb 11 23:48:24 babs1 kernel: usb usb1: Product: Silicon Integrated
Systems [SiS] USB 1
.0 Controller
Feb 11 23:48:24 babs1 kernel: usb usb1: Manufacturer: Linux 2.6.10 ohci_hcd
Feb 11 23:48:24 babs1 kernel: usb usb1: SerialNumber: 0000:00:02.2
Feb 11 23:48:24 babs1 kernel: usb usb1: hotplug
Feb 11 23:48:24 babs1 kernel: usb usb1: adding 1-0:1.0 (config #1,
interface 0)
Feb 11 23:48:24 babs1 kernel: usb 1-0:1.0: hotplug
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: usb_probe_interface
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: usb_probe_interface - got id
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: USB hub found
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: 3 ports detected
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: standalone hub
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: no power switching (usb 1.0)
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: global over-current protection
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: power on to power good time: 2ms
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: local power source is good
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: no over-current condition exists
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: state 5 ports 3 chg ffff evt ffff
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: port 1, status 0100, change
0000, 12 Mb/s
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: port 2, status 0100, change
0000, 12 Mb/s
Feb 11 23:48:24 babs1 kernel: hub 1-0:1.0: port 3, status 0100, change
0000, 12 Mb/s
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.2: created debug files
Feb 11 23:48:24 babs1 kernel: PCI: Found IRQ 5 for device 0000:00:02.3
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: Silicon Integrated
Systems [SiS] U
SB 1.0 Controller (#2)
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: irq 5, pci mem
0xcffff000
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: new USB bus
registered, assigned b
us number 2
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: resetting from
state 'reset', cont
rol = 0x200
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: OHCI controller state
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: OHCI 1.0, with
legacy support regi
sters
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: control 0x283 RWC
HCFS=operational
CBSR=3
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: cmdstatus 0x00000 SOC=0
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: intrstatus
0x00000044 RHSC SF
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: intrenable
0x8000000a MIE RD WDH
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: hcca frame #0003
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.a 01000203
POTPGT=1 NPS ND
P=3
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.b 00000000
PPCM=0000 DR=00
00
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.status
00008000 DRWE
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[0] 0x00010101
CSC PPS CCS
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[1] 0x00000100
PPS
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[2] 0x00000100
PPS
Feb 11 23:48:24 babs1 kernel: ohci_hcd 0000:00:02.3: supports USB remote
wakeup
Feb 11 23:48:24 babs1 kernel: usb usb2: new device strings: Mfr=3,
Product=2, SerialNum
ber=1
Feb 11 23:48:24 babs1 kernel: usb usb2: default language 0x0409
Feb 11 23:48:24 babs1 kernel: usb usb2: Product: Silicon Integrated
Systems [SiS] USB 1
.0 Controller (#2)
Feb 11 23:48:24 babs1 kernel: usb usb2: Manufacturer: Linux 2.6.10 ohci_hcd
Feb 11 23:48:24 babs1 kernel: usb usb2: SerialNumber: 0000:00:02.3
Feb 11 23:48:24 babs1 kernel: usb usb2: hotplug
Feb 11 23:48:24 babs1 kernel: usb usb2: adding 2-0:1.0 (config #1,
interface 0)
Feb 11 23:48:24 babs1 kernel: usb 2-0:1.0: hotplug
Feb 11 23:48:25 babs1 kernel: ohci_hcd 0000:00:02.2: suspend root hub
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: usb_probe_interface
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: usb_probe_interface - got id
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: USB hub found
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: 3 ports detected
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: standalone hub
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: no power switching (usb 1.0)
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: global over-current protection
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: power on to power good time: 2ms
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: local power source is good
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: no over-current condition exists
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: state 5 ports 3 chg ffff evt ffff
Feb 11 23:48:25 babs1 kernel: ohci_hcd 0000:00:02.3: GetStatus
roothub.portstatus [0] =
0x00010101 CSC PPS CCS
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: port 1, status 0101, change
0001, 12 Mb/s
Feb 11 23:48:25 babs1 kernel: ohci_hcd 0000:00:02.3: created debug files
Feb 11 23:48:25 babs1 pci.agent[3455]: ohci-hcd: loaded successfully
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: debounce: port 1: total 100ms
stable 100ms s
tatus 0x101
Feb 11 23:48:25 babs1 pci.agent[3572]: ohci-hcd: already loaded
Feb 11 23:48:25 babs1 kernel: ohci_hcd 0000:00:02.3: GetStatus
roothub.portstatus [0] =
0x00100103 PRSC PPS PES CCS
Feb 11 23:48:25 babs1 kernel: usb 2-1: new full speed USB device using
ohci_hcd and add
ress 2
Feb 11 23:48:25 babs1 kernel: ohci_hcd 0000:00:02.3: GetStatus
roothub.portstatus [0] =
0x00100103 PRSC PPS PES CCS
Feb 11 23:48:25 babs1 kernel: usb 2-1: ep0 maxpacket = 8
Feb 11 23:48:25 babs1 kernel: usb 2-1: new device strings: Mfr=1,
Product=2, SerialNumb
er=0
Feb 11 23:48:25 babs1 kernel: usb 2-1: default language 0x0409
Feb 11 23:48:25 babs1 kernel: usb 2-1: Product: SNAPSCAN
Feb 11 23:48:25 babs1 kernel: usb 2-1: Manufacturer: AGFA
Feb 11 23:48:25 babs1 kernel: usb 2-1: hotplug
Feb 11 23:48:25 babs1 kernel: usb 2-1: adding 2-1:1.0 (config #1,
interface 0)
Feb 11 23:48:25 babs1 kernel: usb 2-1:1.0: hotplug
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: port 2, status 0100, change
0000, 12 Mb/s
Feb 11 23:48:25 babs1 kernel: hub 2-0:1.0: port 3, status 0100, change
0000, 12 Mb/s
Feb 11 23:48:25 babs1 usb.agent[3644]: libusbscanner: loaded
successfully
-----------------------------------------------------------------------
Restarting hotplug (/etc/init.d/hotplug restart), scanner plugged on usb
hub:
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: remove, state 1
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: roothub graceful
disconnect
Feb 11 23:41:13 babs1 kernel: usb usb1: USB disconnect, address 1
Feb 11 23:41:13 babs1 kernel: usb 1-1: USB disconnect, address 2
Feb 11 23:41:13 babs1 kernel: usb 1-1: usb_disable_device nuking all URBs
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: shutdown urb
d775b460 pipe
40408280 ep1in-intr
Feb 11 23:41:13 babs1 kernel: usb 1-1: unregistering interface 1-1:1.0
Feb 11 23:41:13 babs1 kernel: usb 1-1:1.0: hotplug
Feb 11 23:41:13 babs1 kernel: usb 1-1: unregistering device
Feb 11 23:41:13 babs1 kernel: usb 1-1: hotplug
Feb 11 23:41:13 babs1 kernel: usb usb1: usb_disable_device nuking all URBs
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: shutdown urb
d775bce0 pipe 4040818
0 ep1in-intr
Feb 11 23:41:13 babs1 kernel: usb usb1: unregistering interface 1-0:1.0
Feb 11 23:41:13 babs1 kernel: usb 1-0:1.0: hotplug
Feb 11 23:41:13 babs1 kernel: usb usb1: unregistering device
Feb 11 23:41:13 babs1 kernel: usb usb1: hotplug
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: stop operational
controller (state
0x85)
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: OHCI controller state
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: OHCI 1.0, with
legacy support regi
sters
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: control 0x283 RWC
HCFS=operational
CBSR=3
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: cmdstatus 0x00000 SOC=0
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: intrstatus
0x00000024 FNO SF
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: intrenable
0x8000000a MIE RD WDH
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: ed_controlhead 140a4000
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: hcca frame #1930
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.a 01000203
POTPGT=1 NPS ND
P=3
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.b 00000000
PPCM=0000 DR=00
00
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.status
00008000 DRWE
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[0] 0x00000103
PPS PES CCS
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[1] 0x00000100
PPS
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[2] 0x00000100
PPS
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: USB bus 1 deregistered
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: remove, state 1
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: roothub graceful
disconnect
Feb 11 23:41:13 babs1 kernel: usb usb2: USB disconnect, address 1
Feb 11 23:41:13 babs1 kernel: usb usb2: usb_disable_device nuking all URBs
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: shutdown urb
d775be60 pipe 4040818
0 ep1in-intr
Feb 11 23:41:13 babs1 kernel: usb usb2: unregistering interface 2-0:1.0
Feb 11 23:41:13 babs1 kernel: usb 2-0:1.0: hotplug
Feb 11 23:41:13 babs1 kernel: usb usb2: unregistering device
Feb 11 23:41:13 babs1 kernel: usb usb2: hotplug
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: stop suspend
controller (state 0x8
5)
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: OHCI controller state
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: OHCI 1.0, with
legacy support regi
sters
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: control 0x6c3 RWE
RWC HCFS=suspend
CBSR=3
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: cmdstatus 0x00000 SOC=0
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: intrstatus 0x00000000
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: intrenable
0x8000000a MIE RD WDH
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: hcca frame #0273
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.a 01000203
POTPGT=1 NPS ND
P=3
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.b 00000000
PPCM=0000 DR=00
00
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.status
00008000 DRWE
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[0] 0x00000100
PPS
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[1] 0x00000100
PPS
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[2] 0x00000100
PPS
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.3: USB bus 2 deregistered
Feb 11 23:41:13 babs1 pci.agent[32766]: i2c-sis96x: already loaded
Feb 11 23:41:13 babs1 kernel: ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host
Controller (OHC
I) Driver (PCI)
Feb 11 23:41:13 babs1 kernel: ohci_hcd: block sizes: ed 64 td 64
Feb 11 23:41:13 babs1 kernel: PCI: Found IRQ 11 for device 0000:00:02.2
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: Silicon Integrated
Systems [SiS] U
SB 1.0 Controller
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: irq 11, pci mem
0xcfffe000
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: new USB bus
registered, assigned b
us number 1
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: resetting from
state 'reset', cont
rol = 0x200
Feb 11 23:41:13 babs1 kernel: ohci_hcd 0000:00:02.2: OHCI controller state
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: OHCI 1.0, with
legacy support regi
sters
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: control 0x283 RWC
HCFS=operational
CBSR=3
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: cmdstatus 0x00000 SOC=0
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: intrstatus
0x00000044 RHSC SF
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: intrenable
0x8000000a MIE RD WDH
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: hcca frame #0003
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.a 01000203
POTPGT=1 NPS ND
P=3
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.b 00000000
PPCM=0000 DR=00
00
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.status
00008000 DRWE
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[0] 0x00010101
CSC PPS CCS
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[1] 0x00000100
PPS
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: roothub.portstatus
[2] 0x00000100
PPS
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: supports USB remote
wakeup
Feb 11 23:41:14 babs1 kernel: usb usb1: new device strings: Mfr=3,
Product=2, SerialNum
ber=1
Feb 11 23:41:14 babs1 kernel: usb usb1: default language 0x0409
Feb 11 23:41:14 babs1 kernel: usb usb1: Product: Silicon Integrated
Systems [SiS] USB 1
.0 Controller
Feb 11 23:41:14 babs1 kernel: usb usb1: Manufacturer: Linux 2.6.10 ohci_hcd
Feb 11 23:41:14 babs1 kernel: usb usb1: SerialNumber: 0000:00:02.2
Feb 11 23:41:14 babs1 kernel: usb usb1: hotplug
Feb 11 23:41:14 babs1 kernel: usb 1-0:1.0: hotplug
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: usb_probe_interface
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: usb_probe_interface - got id
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: USB hub found
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: 3 ports detected
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: standalone hub
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: no power switching (usb 1.0)
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: global over-current protection
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: power on to power good time: 2ms
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: local power source is good
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: no over-current condition exists
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: state 5 ports 3 chg ffff evt ffff
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: GetStatus
roothub.portstatus [0] =
0x00010101 CSC PPS CCS
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: port 1, status 0101, change
0001, 12 Mb/s
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: created debug files
Feb 11 23:41:14 babs1 kernel: PCI: Found IRQ 5 for device 0000:00:02.3
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: Silicon Integrated
Systems [SiS] U
SB 1.0 Controller (#2)
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: irq 5, pci mem
0xcffff000
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: new USB bus
registered, assigned b
us number 2
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: resetting from
state 'reset', cont
rol = 0x200
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: enabling initreset
quirk
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: OHCI controller state
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: OHCI 1.0, with
legacy support regi
sters
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: control 0x283 RWC
HCFS=operational
CBSR=3
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: cmdstatus 0x00000 SOC=0
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: intrstatus
0x00000004 SF
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: intrenable
0x8000000a MIE RD WDH
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: hcca frame #0003
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.a 01000203
POTPGT=1 NPS ND
P=3
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.b 00000000
PPCM=0000 DR=00
00
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.status
00008000 DRWE
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[0] 0x00000100
PPS
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[1] 0x00000100
PPS
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: roothub.portstatus
[2] 0x00000100
PPS
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: supports USB remote
wakeup
Feb 11 23:41:14 babs1 kernel: usb usb2: new device strings: Mfr=3,
Product=2, SerialNum
ber=1
Feb 11 23:41:14 babs1 kernel: usb usb2: default language 0x0409
Feb 11 23:41:14 babs1 kernel: usb usb2: Product: Silicon Integrated
Systems [SiS] USB 1
.0 Controller (#2)
Feb 11 23:41:14 babs1 kernel: usb usb2: Manufacturer: Linux 2.6.10 ohci_hcd
Feb 11 23:41:14 babs1 kernel: usb usb2: SerialNumber: 0000:00:02.3
Feb 11 23:41:14 babs1 kernel: usb usb2: hotplug
Feb 11 23:41:14 babs1 kernel: hub 1-0:1.0: debounce: port 1: total 100ms
stable 100ms s
tatus 0x101
Feb 11 23:41:14 babs1 kernel: usb usb2: adding 2-0:1.0 (config #1,
interface 0)
Feb 11 23:41:14 babs1 kernel: usb 2-0:1.0: hotplug
Feb 11 23:41:14 babs1 kernel: hub 2-0:1.0: usb_probe_interface
Feb 11 23:41:14 babs1 kernel: hub 2-0:1.0: usb_probe_interface - got id
Feb 11 23:41:14 babs1 kernel: hub 2-0:1.0: USB hub found
Feb 11 23:41:14 babs1 kernel: hub 2-0:1.0: 3 ports detected
Feb 11 23:41:14 babs1 kernel: hub 2-0:1.0: standalone hub
Feb 11 23:41:14 babs1 kernel: hub 2-0:1.0: no power switching (usb 1.0)
Feb 11 23:41:14 babs1 kernel: hub 2-0:1.0: global over-current protection
Feb 11 23:41:14 babs1 kernel: hub 2-0:1.0: power on to power good time: 2ms
Feb 11 23:41:14 babs1 kernel: hub 2-0:1.0: local power source is good
Feb 11 23:41:14 babs1 kernel: hub 2-0:1.0: no over-current condition exists
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.3: created debug files
Feb 11 23:41:14 babs1 pci.agent[326]: ohci-hcd: loaded successfully
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: GetStatus
roothub.portstatus [0] =
0x00100103 PRSC PPS PES CCS
Feb 11 23:41:14 babs1 kernel: usb 1-1: new full speed USB device using
ohci_hcd and add
ress 2
Feb 11 23:41:14 babs1 kernel: ohci_hcd 0000:00:02.2: GetStatus
roothub.portstatus [0] =
0x00100103 PRSC PPS PES CCS
Feb 11 23:41:14 babs1 pci.agent[437]: ohci-hcd: already loaded
Feb 11 23:41:14 babs1 kernel: usb 1-1: new device strings: Mfr=0,
Product=0, SerialNumb
er=0
Feb 11 23:41:14 babs1 kernel: usb 1-1: hotplug
Feb 11 23:41:15 babs1 kernel: usb 1-1: adding 1-1:1.0 (config #1,
interface 0)
Feb 11 23:41:15 babs1 kernel: usb 1-1:1.0: hotplug
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: usb_probe_interface
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: usb_probe_interface - got id
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: USB hub found
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: 4 ports detected
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: standalone hub
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: individual port power switching
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: individual port over-current
protection
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: power on to power good time:
100ms
Feb 11 23:41:15 babs1 kernel: ohci_hcd 0000:00:02.3: suspend root hub
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: local power source is lost
(inactive)
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: enabling power on all ports
Feb 11 23:41:15 babs1 kernel: hub 1-0:1.0: port 2, status 0100, change
0000, 12 Mb/s
Feb 11 23:41:15 babs1 kernel: hub 1-0:1.0: port 3, status 0100, change
0000, 12 Mb/s
Feb 11 23:41:15 babs1 kernel: hub 1-0:1.0: state 5 ports 3 chg fff8 evt 0002
Feb 11 23:41:15 babs1 kernel: hub 2-0:1.0: state 5 ports 3 chg ffff evt ffff
Feb 11 23:41:15 babs1 kernel: hub 2-0:1.0: port 1, status 0100, change
0000, 12 Mb/s
Feb 11 23:41:15 babs1 kernel: hub 2-0:1.0: port 2, status 0100, change
0000, 12 Mb/s
Feb 11 23:41:15 babs1 kernel: hub 2-0:1.0: port 3, status 0100, change
0000, 12 Mb/s
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: state 5 ports 4 chg ffff evt ffff
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: port 1, status 0100, change
0000, 12 Mb/s
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: port 2, status 0100, change
0000, 12 Mb/s
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: port 3, status 0101, change
0001, 12 Mb/s
Feb 11 23:41:15 babs1 pci.rc[32704]: ignoring pci display device on
01:00.0
Feb 11 23:41:15 babs1 kernel: hub 1-1:1.0: debounce: port 3: total 100ms
stable 100ms s
tatus 0x101
Feb 11 23:41:15 babs1 kernel: usb 1-1.3: new full speed USB device using
ohci_hcd and a
ddress 3
Feb 11 23:41:15 babs1 kernel: ohci_hcd 0000:00:02.2: urb c402a0e0 path
1.3 ep0in 5ec200
00 cc 5 --> status -110
Feb 11 23:41:15 babs1 kernel: usb 1-1.3: device descriptor read/64,
error -110
Feb 11 23:41:15 babs1 kernel: ohci_hcd 0000:00:02.2: urb c402a0e0 path
1.3 ep0in 5ec200
00 cc 5 --> status -110
Feb 11 23:41:15 babs1 kernel: usb 1-1.3: device descriptor read/64,
error -110
Feb 11 23:41:15 babs1 kernel: usb 1-1.3: new full speed USB device using
ohci_hcd and a
ddress 4
Feb 11 23:41:15 babs1 kernel: ohci_hcd 0000:00:02.2: urb c402a0e0 path
1.3 ep0in 5ec200
00 cc 5 --> status -110
Feb 11 23:41:15 babs1 kernel: usb 1-1.3: device descriptor read/64,
error -110
Feb 11 23:41:15 babs1 kernel: ohci_hcd 0000:00:02.2: urb c402a0e0 path
1.3 ep0in 5ec200
00 cc 5 --> status -110
Feb 11 23:41:15 babs1 kernel: usb 1-1.3: device descriptor read/64,
error -110
Feb 11 23:41:16 babs1 kernel: hub 1-1:1.0: port 4, status 0100, change
0000, 12 Mb/s
Feb 11 23:41:16 babs1 kernel: hub 1-1:1.0: state 5 ports 4 chg fff0 evt 0008
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello, Barbara Post.
On 12.02.2005 02:25 you said the following:
| Hi,
| I am unable to use my USB Agfa Snapscan 1212_U scanner, with kernel
| 2.6.8.1 or 2.6.10 (both compiled by myself from http://www.kernel.org sources)
| and xsane 0.96-1 (Debian).
|
| It worked with kernel 2.6.7.
|
| When I use VMware, I'm able to use it though (in Windows), whatever
| linux kernel I use.
|
| When I start xsane, I get "error opening device
| 'snapscan:libusb:001:004': I/O error on device" or simply "no device
| found" if I restart xsane after the first error message (or sometimes at
| first start).
|
| Sometimes it gets further and when I try to acquire preview, I get "I/O
| error" and the following in /var/log/syslog :
|
| Feb 11 23:19:00 babs1 kernel: ohci_hcd 0000:00:02.2: urb c15e13e0 path
| 1.3 ep1in 82160000 cc 8 --> status -75
I have the same problem with my Epson 1260 on RHEL4 beta2 (linux-2.6.9).
I don't know about 2.6.7, but with 2.4.21 (RHEL3) it works fine.
- --
Boris B. Zhmurov
mailto: [email protected]
"wget http://kernelpanic.ru/bb_public_key.pgp -O - | gpg --import"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)
iD8DBQFCDUVdmEQixi5w37YRApP+AJ9I5M7hf/0HPCATTnemFaNbLhvsbgCfZdTz
+hQ/jvcu7+xDpaXYTiOFZj4=
=6WVB
-----END PGP SIGNATURE-----
Hello,
I finally succeeded in making my USB scanner work with 2.6.8.1 and above kernels. I remind you I was
able to see connection/disconnection messages, but not to use it via xsane.
I found the solution on a Debian mailing-list, that worked for me :
cd to /dev
type :
/sbin/MAKEDEV usb
This command created the required character devices. Since USB support has been rewritten between
2.6.7 and 2.6.8.1 kernels, this was likely to happen when one manually installs a new kernel...
Barbara
Boris B. Zhmurov wrote:
>
> Hello, Barbara Post.
>
> On 12.02.2005 02:25 you said the following:
>
> | Hi,
> | I am unable to use my USB Agfa Snapscan 1212_U scanner, with kernel
> | 2.6.8.1 or 2.6.10 (both compiled by myself from http://www.kernel.org sources)
> | and xsane 0.96-1 (Debian).
> |
> | It worked with kernel 2.6.7.
> |
> | When I use VMware, I'm able to use it though (in Windows), whatever
> | linux kernel I use.
> |
> | When I start xsane, I get "error opening device
> | 'snapscan:libusb:001:004': I/O error on device" or simply "no device
> | found" if I restart xsane after the first error message (or sometimes at
> | first start).
> |
> | Sometimes it gets further and when I try to acquire preview, I get "I/O
> | error" and the following in /var/log/syslog :
> |
> | Feb 11 23:19:00 babs1 kernel: ohci_hcd 0000:00:02.2: urb c15e13e0 path
> | 1.3 ep1in 82160000 cc 8 --> status -75
>
>
> I have the same problem with my Epson 1260 on RHEL4 beta2 (linux-2.6.9).
> I don't know about 2.6.7, but with 2.4.21 (RHEL3) it works fine.
>
>