ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.6.12-rc1-mm2/
- Added David Miller's networking tree to the -mm lineup as bk-net.patch.
- Added Herbert Xu's crypto development tree to the -mm lineup as
bk-cryptodev.patch.
-mm kernels now aggregate Linus's tree and 34 subsystem trees. Usually
they are pulled 3-4 hours before the release of the -mm kernel.
Usually it is possible to determine the latest cset from each tree by
looking at the first couple of lines of the relevant patch in the
broken-out/ directory. Although sometimes it isn't there if I had to
massage the diff.
- There may be an x86_64 problem here, although it works for me. If it
fails early in boot, try reverting
x86_64-separate-amd-cmp-detection-from-hyper-threading.patch
- There's some work here on the recent USB PM resume bugs. If you had
problems there, please test and be sure to cc
[email protected] in any reports.
- Some fixes for the recent DRM problems.
- Big DVB update
- md updates
- nfs4 server updates
- Lots more fixes
- Lots more bugs.
Chages since 2.6.12-rc1-mm1:
linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-arm.patch
bk-audit.patch
bk-cifs.patch
bk-cpufreq.patch
bk-cryptodev.patch
bk-driver-core.patch
bk-drm.patch
bk-drm-via.patch
bk-i2c.patch
bk-ia64.patch
bk-ieee1394.patch
bk-input.patch
bk-jfs.patch
bk-kbuild.patch
bk-libata.patch
bk-net.patch
bk-netdev.patch
bk-nfs.patch
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
bk-scsi-rc-fixes.patch
bk-serial.patch
bk-usb.patch
bk-watchdog.patch
bk-xfs.patch
Latest versions of external trees
-input-fix-fast-scrolling-scancodes-in-atkbdc.patch
-b44-allocate-tx-bounce-bufs-as-needed.patch
-drivers-net-myri_codeh-cleanup.patch
-e100-napi-state-machine-fix.patch
-fix-pci_disable_device-in-8139too.patch
-bonding-needs-inet.patch
-drivers-net-sis900c-fix-a-warning.patch
-fix-suspend-resume-on-via-velocity.patch
-we-18-aka-wpa.patch
-smc91x-addr-config-check.patch
-smc91x-warning-fix.patch
-tcp-infrastructure-split-out.patch
-tcp-bic-11-support.patch
-tcp-westwood-support.patch
-tcp-westwood-support-kconfig-fix.patch
-tcp-vegas-support.patch
-tcp-high-speed-support.patch
-drivers-net-arcnet-arcnetc-gcc4-fixes.patch
-drivers-net-depcac-gcc4-fix.patch
Merged
-fix-agp_backend-usage-in-drm_agp_init.patch
Fixed differently in bk-drm.patch
-tcp-infrastructure-split-out.patch
-tcp-bic-11-support.patch
-tcp-westwood-support.patch
-tcp-westwood-support-kconfig-fix.patch
-tcp-vegas-support.patch
-tcp-high-speed-support.patch
These broke changes in bk-net.patch.
+ppc64-fix-aio-panic-caused-by-is_hugepage_only_range.patch
AIO-vs-hugetlb oops fix
+acpi-ec-warning-fix.patch
Fix bk-acpi warning
+agp-fix-for-xen-vmm.patch
Xen preparatory work
+3dfx-drm-depends-on-pci.patch
Fixes for bk-drm.patch
+alps-printk-tidy.patch
Fix up a bk-input printk.
+nfs4-empty-array-fix.patch
bk-nfs build fix
+debug-for-pci-io-mem-allocation.patch
Extra pci layer debugging support
+usb_cdc-build-fix.patch
Fix build for old gcc
+fix-harmful-typos-in-zd1201c.patch
Fix zd1201c bogons
+usb-resume-fixes.patch
+usb-suspend-updates-interface-suspend.patch
+hcd-suspend-uses-pm_message_t.patch
Fixes for USB PM resume.
+fix-mmap-of-dev-kmem.patch
Fix oopses with mmapping of /dev/kmem
+unused-size-assignment-in-filemap_nopage.patch
Remove some dead code and a warning
+freepgt-free_pgtables-use-vma-list.patch
+freepgt-remove-mm_vm_sizemm.patch
+freepgt-hugetlb_free_pgd_range.patch
+freepgt-remove-arch-pgd_addr_end.patch
+freepgt-mpnt-to-vma-cleanup.patch
+freepgt-hugetlb-area-is-clean.patch
Core mm pagetable handling simplification (hah), cleanup, speedup.
+a-new-10gb-ethernet-driver-by-chelsio-communications-update.patch
Updates to the Chelsio 10GB ethernet driver
+restore-ports-module-parameter-for-ip_nat_ftp-and-ip_nat_irc.patch
netfilter fix
+e1000-flush-work-queues-on-remove.patch
e1000 shutdown fix
+ipt-leak-fix.patch
net fix
+selinux-make-code-static-and-remove-unused-code.patch
+selinux-allow-mounting-of-filesystems-with-invalid-root-inode-context.patch
+selinux-audit-unrecognized-netlink-messages.patch
+selinux-add-name_connect-permission-check.patch
SELinux updates and cleanups
+ppc32-typo-fix-in-load-store-string-emulation.patch
+ppc32-report-chipset-version-in-common-proc-cpuinfo-handling.patch
+ppc32-dmasound-compilation-fix.patch
+ppc32-fix-sandpoint-soft-reboot.patch
+ppc32-64-map-prefetchable-pci-without-guarded-bit.patch
ppc32 updates
+ppc64-fix-gcc4-compile-error-in-pacah.patch
+ppc64-fix-compile-error-in-promc.patch
+ppc64-fix-linkage-error-on-g5.patch
+ppc64-fix-semtimedop-compat-syscall.patch
+ppc64-fix-pseries-hcall-stubs.patch
+ppc64-make-numa=off-command-line-argument-work-again.patch
+ppc64-fix-ethernet-phy-reset-on-imac-g5.patch
ppc64 updates
-via-irq-fixup-fix.patch
+x86-via-workaround.patch
Updated version of the VIA IRQ handling workaround
+x86-fix-esp-corruption-cpu-bug-take-2-fix.patch
Fix x86-fix-esp-corruption-cpu-bug-take-2.patch
+x86_64-update-defconfig.patch
+x86_64-separate-amd-cmp-detection-from-hyper-threading.patch
+x86_64-add-new-amd-cpuid-flags-to-cpuinfo.patch
+x86_64-add-an-64bit-entry-path-for-exec.patch
+x86_64-busses-array-is-only-indexed-with-a-8bit-value.patch
+x86_64-fix-compilation-with-config_proc_fs=n.patch
+x86_64-move-hpet-selection-into-processor-specific.patch
+x86_64-remove-never-used-obsolete-file.patch
+x86_64-fix-indentation-in-vsyscallc-no-functional.patch
+x86_64-nop-out-system-call-instruction-in-vsyscall-page.patch
+x86_64-remove-obsolete-comments-in-vsyscallc-and-fix.patch
+x86_64-remove-noisy-printk-in-k8-bus-detection-code.patch
+x86_64-remove-unused-and-broken-code-in-ioh.patch
+x86_64-remove-stale-unused-file.patch
+x86_64-move-put_user-out-of-line.patch
+x86_64-give-out-of-line-get_user-better-calling.patch
+x86_64-work-around-tyan-bios-mtrr-initialization-bug.patch
+x86_64-include-pci-express-configuration.patch
+x86_64-cleanups-in-new-backtrace-code-in-oprofile.patch
+x86_64-fix-special-isa-case-in-iounmap.patch
+x86_64-fix-formatting-and-white-space-in-signal-code.patch
+x86_64-mem=xxx-will-now-limit-kernel-memory-to-xxx.patch
+x86_64-resume-pit-for-x86_64.patch
+x86_64-fix-nmi-rtc-access-race.patch
+x86_64-minor-fix-to-tlb-flush-ipi.patch
+x86_64-always-reload-cr3-completely-when-a-lazy-mm.patch
+x86_64-fix-ldt-descriptor.patch
+x86_64-change-the-y2069-bug-in-the-rtc-timer-code-to-be.patch
+x86_64-only-free-pmds-and-puds-after-other-cpus-have.patch
+x86_64-dont-enable-interrupts-in-oopses.patch
+x86_64-fix-smp-fallback-to-up.patch
+x86_64-fix-config_preempt.patch
+x86_64-fix-exception-stack-detection-during-backtraces.patch
+x86_64-fix-gcc-34-warning-in-bitopsc.patch
+x86_64-clean-up-the-iommu-initialisation-a-bit.patch
x86_64 update
+alpha-spinlockh-update.patch
alpha build fix
+m32r-update-mmu-less-support-1.patch
+m32r-update-mmu-less-support-2.patch
+m32r-update-mmu-less-support-3.patch
+m32r-fix-m32102-i-cache-invalidation.patch
+m32r_sio-driver-update.patch
m32r update
+m68k-update-signal-delivery-handling.patch
+m68k-stdma-replace-sleep_on-with-wait_event.patch
+zorro-replace-printk-with-pr_info-in-drivers-zorro-zorroc.patch
+mac-ncr5380-scsi-fix-bus-error.patch
+m68k-ip-checksum-updates.patch
+sun-3-3x-enable-sun-partition-tables-support-by-default.patch
+m68k-add-missing-pieces-of-thread-info-tif_memdie-support.patch
+tpm-depends-on-pci.patch
m68k update and other stuff from Gerd.
-uml-cope-with-uml_net-security-fix.patch
+uml-cope-with-uml_net-security-fix-2.patch
Updated
+uml-fix-compile.patch
+uml-cpu_relax-fix.patch
+uml-extend-cmd-line-limits.patch
+uml-disable-more-hardware-kconfig-opt-and-rename-usermode-to-uml.patch
+uml-little-build-fixes.patch
+uml-factor-out-common-code-in-user-obj-handling.patch
+uml-kbuild-link-cmd.patch
+uml-add-kconfig-debug-deps.patch
+uml-real-fix-for-__gcov_init-symbols.patch
+uml-fix-cond-expr-as-lvalues-warning.patch
UML update
+s390-swapped-memset-arguments.patch
s390 dyslexia fix
-building-areca-arcmsr-driver-outside-kernel-source-tree.patch
Folded into the ever-updated areca-raid-linux-scsi-driver.patch
+keys-pass-session-keyring-to-call_usermodehelper.patch
+keys-pass-session-keyring-to-call_usermodehelper-warning-fix.patch
+keys-use-rcu-to-manage-session-keyring-pointer.patch
+keys-make-request-key-create-an-authorisation-key.patch
Key management updates
+fix-mmap-return-value-to-conform-to-posix.patch
Make mmap posixly correct again.
+timers-enable-irqs-in-__mod_timer.patch
+timers-enable-irqs-in-__mod_timer-tidy.patch
More updates to the core kernel timer code.
+fat-set-ms_noatime-to-msdos.patch
+fat-fix-msdos-datetime.patch
fatfs fixes
+fix-compile-warning-in-drivers-pnp-resourcec-with-config_pci.patch
Warning fix
+nlm-fix-f_count-leak.patch
nfsd fix
+module-parameter-fixes.patch
Fix some module parameters
+fs-hpfs-fix-hpfs-support-under-64-bit-kernel.patch
Fix hpfs for 64-bit machines
+arch-hook-for-notifying-changes-in-pte-protections-bits.patch
ia64 core mm hook
+serial-digi-neo-driver.patch
New serial driver
+netmos-parallel-serial-combo-support.patch
Improved netmos parport support.
+consolidate-asm-ipch.patch
ipx.h cleanups
+bt819-array-indexing-fix.patch
Fix bogon in a v4l driver
+unified-spinlock-initialization.patch
spinlock cleanup
+drivers-block-dac960c-fix-a-use-after-free.patch
+drivers-telephony-ixj-fix-a-use-after-free.patch
Couple of use-after-free fixes
+dvb-clarify-firmware-upload-messages.patch
+dvb-dibcom-frontend-fixes.patch
+dvb-dibusb-misc-fixes.patch
+dvb-skystar2-remove-duplicate-pci_release_region.patch
+dvb-mt352-pinnacle-300i-comments.patch
+dvb-support-activy-budget-card.patch
+dvb-skystar2-update-email-address.patch
+dvb-ves1x93-invert_pwm-fix.patch
+dvb-dibusb-readme-update.patch
+dvb-dibusb-support-hauppauge-wintv-nova-t-usb2.patch
+dvb-nxt2002-qam64-256-support.patch
+dvb-get_dvb_firmware-new-unshield-version.patch
+dvb-dib3000-corrected-device-naming.patch
+dvb-dibusb-debug-changes.patch
+dvb-dibusb-increased-the-number-of-urbs-for-usb11-devices.patch
+dvb-ttusb_dec-use-alternative-interface-to-save-bandwidth.patch
+dvb-l64781-email-address-fix.patch
+dvb-skystar2-fix-mac-address-reading.patch
+dvb-support-kworld-adstech-instant-dvb-t-usb20.patch
+dvb-cleanups-make-stuff-static.patch
+dvb-refactor-sw-pid-filter-to-drop-redundant-code.patch
+dvb-nxt2002-fix-max-frequency.patch
+dvb-ttusb-budget-s-usb_unlink_urb-usb_kill_urb.patch
+dvb-av7110-fix-oops-when-av7110_ir_init-failed.patch
+dvb-saa7146-static-initialization.patch
+dvb-av7110-error-handling-during-attach.patch
+dvb-corrected-links-to-firmware-files.patch
+dvb-support-pchdtv-hd2000.patch
+dvb-dibusb-support-nova-t-usb-ir.patch
+dvb-oren-or51211-or51132_qam-and-or51132_vsb-firmware-download-info.patch
+dvb-ttusb_dec-ir-support.patch
+dvb-dibusb-pll-fix.patch
+dvb-tda10021-fix-continuity-errors.patch
+dvb-saa7146-remove-duplicate-setgpio.patch
+dvb-fix-cams-on-typhoon-dvb-s.patch
+dvb-frontends-kfree-cleanup.patch
+dvb-clear-up-confusion-between-ids-and-adapters.patch
+dvb-dibusb-remove-useless-ifdef.patch
+dvb-support-for-technotrend-pci-dvb-t.patch
+dvb-dibusb-hanftek-umt-010-fixes.patch
+dvb-vfree-checking-cleanups.patch
+dvb-convert-from-pci_module_init-to-pci_register_driver.patch
+dvb-dibusb-support-dtt200u-yakumo-typhoon-hama-usb20-device.patch
+dvb-sparse-warnings-on-one-bit-bitfields.patch
+dvb-support-nova-s-rev-22.patch
+dvb-ttusb_dec-cleanup.patch
+dvb-gcc-295-compile-fixes.patch
+dvb-mt352-cleanups.patch
DVB system updates
+ext3-fix-journal_unmap_buffer-race.patch
+ext3-dynamic-allocating-block-reservation-info.patch
+ext3-reservation-info-cleanup-remove-rsv_seqlock.patch
+ext3-reservation-info-cleanup-remove-rsv_seqlock-fix.patch
+ext3-move-goal-logical-block-into-block-allocation-info.patch
Reduce the size of ext3 inodes
+pcmcia-select-crc32-in-kconfig-for-pcmcia.patch
pcmcia linkage fix
+svcrpc-auth_domain-documentation.patch
+nfsd4-fix-share-conflict-tests.patch
+nfsd4-remove-unneeded-stateowner-arguments.patch
+nfsd4-fix-use-after-put-in-cb_recall.patch
+nfsd4-allow-read-on-open-for-write.patch
+nfsd4-factor-out-common-open_truncate-code.patch
+nfsd4-fix-failure-to-truncate-on-some-opens.patch
+nfsd4_remove_unused_acl_function.patch
+nfsd4-dont-set-write_owner-in-either-allow-or-deny-bits.patch
+nfsd4-acl-dont-set-named-attrs.patch
+nfsd4-acl-error-fix.patch
+nfsd4-rename-release_delegation.patch
+nfsd4-remove-trailing-whitespace-from-nfs4procc.patch
+nfsd4-fix-open-returns-for-other-claim-types.patch
+nfsd4-fix-indentation-in-nfsd4_open.patch
nfsd updates
+rock-lindent.patch
+rock-manual-tidies.patch
+rock-remove-CHECK_SP.patch
+rock-remove-CONTINUE_DECLS.patch
+rock-remove-CHECK_CE.patch
+rock-remove-SETUP_ROCK_RIDGE.patch
+rock-remove-MAYBE_CONTINUE.patch
+rock-comment-tidies.patch
+rock-lindent-rock-h.patch
+isofs-remove-debug-stuff.patch
+rock-handle-corrupted-directories.patch
+rock-rename-union-members.patch
+rock-handle-directory-overflows.patch
rotoroot and fix the isofs rock-ridge handling.
+perfctr-x86-fix-and-cleanups.patch
+perfctr-ppc32-fix-and-cleanups.patch
+perfctr-64-bit-values-in-register-descriptors.patch
+perfctr-64-bit-values-in-register-descriptors-fix.patch
perfctr updates
-x86_64-entry64.patch
Is in one of the above x86_64 patches
-revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch
Drop this - the modules are now in the kernel.
+wbsd-update.patch
mmc driver update
+md-a-couple-of-tidyups-relating-to-the-bitmap-file.patch
+md-call-bitmap_daemon_work-regularly.patch
+md-print-correct-pid-for-newly-created-bitmap-writeback-daemon.patch
+md-minor-code-rearrangement-in-bitmap_init_from_disk.patch
+md-make-sure-md-bitmap-is-cleared-on-a-clean-start.patch
+md-improve-debug-printing-of-bitmap-superblock.patch
+md-check-return-value-of-write_page-rather-than-ignore-it.patch
+md-enable-the-bitmap-write-back-daemon-and-wait-for-it.patch
+md-dont-skip-bitmap-pages-due-to-lack-of-bit-that-we-just-cleared.patch
+md-fix-bug-when-raid1-attempts-a-partial-reconstruct.patch
+md-allow-md-intent-bitmap-to-be-stored-near-the-superblock.patch
+md-allow-md-to-update-multiple-superblocks-in-parallel.patch
md updates for the new bitmap-based intent logging code.
+fuse-mount-options-fix-fix.patch
fuse fixlet
-cryptoapi-prepare-for-processing-multiple-buffers-at.patch
-cryptoapi-update-padlock-to-process-multiple-blocks-at.patch
These are in the bk-cryptodev patch
+drivers-scsi-pas16c-make-code-static.patch
namespace cleanup
+x86-geode-support-fixes.patch
Tidy up the new x86 Geode CPU support
+drivers-scsi-initioc-cleanups.patch
+dont-do-pointless-null-checks-and-casts-before-kfree.patch
+drivers-char-isicomc-section-fixes.patch
+sound-oss-cleanups.patch
Little fixes
+mm-mmapnommuc-several-unexports.patch
+unexport-hugetlb_total_pages.patch
+unexport-clear_page_dirty_for_io.patch
+mm-filemapc-make-sync_page_range_nolock-static.patch
+mm-filemapc-make-generic_file_direct_io-static.patch
Various dodgy-looking changes to the kernel namespace. These will stay in
-mm for a while.
number of patches in -mm: 823
number of changesets in external trees: 620
number of patches in -mm only: 794
total patches: 1414
All 823 patches:
linus.patch
pcmcia-properly-bail-out-on-mtd-related-ioctl-invocation.patch
pcmcia: properly bail out on MTD-related ioctl invocation
pcmcia-dont-lock-up-in-rsrc_nonstatic-pcmcia_validate_mem.patch
pcmcia: don't lock up in rsrc_nonstatic pcmcia_validate_mem
pcmcia-dont-send-eject-request-events-to-userspace.patch
pcmcia: don't send eject request events to userspace
ppc64-preliminary-changes-to-of-fixup-functions.patch
ppc64: preliminary changes to OF fixup functions
ppc64-make-of-node-fixup-code-usable-at-runtime.patch
ppc64: make OF node fixup code usable at runtime
ppc64-introduce-pseries_reconfig.patch
ppc64: introduce pSeries_reconfig.[ch]
ppc64-promc-use-pseries-reconfig-notifier.patch
ppc64: prom.c: use pSeries reconfig notifier
ppc64-fix-aio-panic-caused-by-is_hugepage_only_range.patch
ppc64: fix AIO panic on PPC64 caused by is_hugepage_only_range()
handle-multiple-video-cards-on-the-same-bus.patch
handle multiple video cards on the same bus
tty-overrun-time-fix.patch
tty overrun time fix
ia64-msi-warning-fixes.patch
ia64 msi warning fixes
ia64-config_apci_numa-fix.patch
ia64 CONFIG_APCI_NUMA fix
bk-acpi.patch
acpi-ec-warning-fix.patch
acpi ec.c warning fix
acpi-toshiba-failure-handling.patch
acpi: Toshiba failure handling
acpi-video-pointer-size-fix.patch
acpi video pointer size fix
acpi-create_polling_proc-fix.patch
acpi: create_polling_proc() fix
bk-agpgart.patch
agp-make-some-code-static.patch
AGP: make some code static
agp-fix-for-xen-vmm.patch
AGP fix for Xen VMM
bk-alsa.patch
include-linux-soundcardh-endianness-fix.patch
include/linux/soundcard.h: endianness fix
bk-arm.patch
arm-atomic_sub_and_test.patch
arm atomic_sub_and_test()
bk-audit.patch
bk-cifs.patch
bk-cpufreq.patch
bk-cryptodev.patch
bk-driver-core.patch
export-platform_add_devices.patch
export platform_add_devices
bk-drm.patch
3dfx-drm-depends-on-pci.patch
3dfx DRM depends on PCI
bk-drm-via.patch
bk-i2c.patch
bk-ia64.patch
bk-ieee1394.patch
bk-input.patch
alps-printk-tidy.patch
alps-printk-tidy
bk-jfs.patch
bk-kbuild.patch
uml-make-deb-pkg-build-target-build-a-debian-style-user-mode-linux-package.patch
uml: make deb-pkg build target build a Debian-style user-mode-linux package
uml-restore-proper-descriptions-in-make-deb-pkg-target.patch
UML - Restore proper descriptions in make deb-pkg target
doc-describe-kbuild-pitfall.patch
doc: describe Kbuild pitfall
complete-cpufreq-kconfig-cleanup.patch
complete cpufreq Kconfig cleanup
bk-libata.patch
bk-net.patch
bk-netdev.patch
bk-nfs.patch
nfs4-empty-array-fix.patch
nfs4 empty array fix
bk-ntfs.patch
bk-pci.patch
debug-for-pci-io-mem-allocation.patch
DEBUG for PCI IO & MEM allocation
pci-pci-transparent-bridge-handling-improvements-pci-core.patch
PCI-PCI transparent bridge handling improvements (pci core)
pci-pci-transparent-bridge-handling-improvements-yenta_socket.patch
PCI-PCI transparent bridge handling improvements (yenta_socket)
acpi-bridge-hotadd-acpi-based-root-bridge-hot-add.patch
acpi bridge hotadd: ACPI based root bridge hot-add
acpi-bridge-hotadd-fix-pci_enable_device-for-p2p-bridges.patch
acpi bridge hotadd: Fix pci_enable_device() for p2p bridges
acpi-bridge-hotadd-make-pcibios_fixup_bus-hot-plug-safe.patch
acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe
acpi-bridge-hotadd-prevent-duplicate-bus-numbers-when-scanning-pci-bridge.patch
acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI bridge
acpi-bridge-hotadd-take-the-pci-lock-when-modifying-pci-bus-or-device-lists.patch
acpi bridge hotadd: Take the PCI lock when modifying pci bus or device lists
acpi-bridge-hotadd-link-newly-created-pci-child-bus-to-its-parent-on-creation.patch
acpi bridge hotadd: Link newly created pci child bus to its parent on creation
acpi-bridge-hotadd-make-the-pci-remove-routines-safe-for-failed-hot-plug.patch
acpi bridge hotadd: Make the PCI remove routines safe for failed hot-plug
acpi-bridge-hotadd-remove-hot-plugged-devices-that-could-not-be-allocated-resources.patch
acpi bridge hotadd: Remove hot-plugged devices that could not be allocated resources
acpi-bridge-hotadd-read-bridge-resources-when-fixing-up-the-bus.patch
acpi bridge hotadd: Read bridge resources when fixing up the bus
acpi-bridge-hotadd-allow-acpi-add-and-start-operations-to-be-done-independently.patch
acpi bridge hotadd: Allow ACPI .add and .start operations to be done independently
acpi-bridge-hotadd-export-the-interface-to-get-pci-id-for-an-acpi-handle.patch
acpi bridge hotadd: Export the interface to get PCI id for an ACPI handle
bk-scsi.patch
megaraid_sas-announcing-new-module-for.patch
megaraid_sas: Announcing new module for LSI Logic's SAS based MegaRAID controllers
open-iscsi-scsi.patch
open-iscsi-scsi
open-iscsi-headers.patch
open-iscsi-headers
open-iscsi-kconfig.patch
open-iscsi-kconfig
open-iscsi-makefile.patch
open-iscsi-makefile
open-iscsi-netlink.patch
open-iscsi-netlink
open-iscsi-doc.patch
open-iscsi-doc
bk-scsi-rc-fixes.patch
add-scsi-changer-driver.patch
add scsi changer driver
scsi-ch-build-fix.patch
scsi ch.c build fix
bk-serial.patch
bk-usb.patch
usb-resume-fixes.patch
usb resume fixes
usb-suspend-updates-interface-suspend.patch
usb suspend updates (interface suspend)
hcd-suspend-uses-pm_message_t.patch
hcd suspend uses pm_message_t
zd1201-makefile-fix.patch
zd1201 makefile fix
zd1201-build-fix.patch
zd1201 build fix
usb-support-for-new-ipod-mini-and-possibly-others.patch
usb: support for new ipod mini (and possibly others)
usb-wacom-driver-update.patch
usb: wacom driver update
bk-watchdog.patch
bk-xfs.patch
mm.patch
add -mmN to EXTRAVERSION
fix-help-for-acpi_container.patch
Fix help for ACPI_CONTAINER
swapspace-layout-improvements.patch
swapspace-layout-improvements
/proc/swaps negative Used
bdi-provide-backing-device-capability-information.patch
BDI: Provide backing device capability information [try #3]
cpusets-big-numa-cpu-and-memory-placement-backing_dev-fix.patch
cpusets-big-numa-cpu-and-memory-placement-backing_dev-fix
add-a-clear_pages-function-to-clear-pages-of-higher.patch
add a clear_pages function to clear pages of higher order
slab-kmalloc-cleanups.patch
slab.[ch]: kmalloc() cleanups
slab-64bit-fix.patch
slab: 64-bit fix
vmscan-move-code-to-isolate-lru-pages-into-separate-function.patch
vmscan: move code to isolate LRU pages into separate function
mm-counter-operations-through-macros.patch
mm counter operations through macros
mm-counter-operations-through-macros-tidy.patch
mm-counter-operations-through-macros-tidt
vmscan-notice-slab-shrinking.patch
vmscan: notice slab shrinking
slab-shrinkers-use-vfs_cache_pressure.patch
slab shrinkers: use vfs_cache_pressure
madvise-do-not-split-the-maps.patch
madvise: do not split the maps
madvise-merge-the-maps.patch
madvise: merge the maps
include-cleanup-in-pgalloch.patch
include cleanup in pgalloc.h
fix-mmap-of-dev-kmem.patch
Fix mmap of /dev/kmem
unused-size-assignment-in-filemap_nopage.patch
unused 'size' assignment in filemap_nopage
freepgt-free_pgtables-use-vma-list.patch
freepgt: free_pgtables use vma list
freepgt-remove-mm_vm_sizemm.patch
freepgt: remove MM_VM_SIZE(mm)
freepgt-hugetlb_free_pgd_range.patch
freepgt: hugetlb_free_pgd_range
freepgt-remove-arch-pgd_addr_end.patch
freepgt: remove arch pgd_addr_end
freepgt-mpnt-to-vma-cleanup.patch
freepgt: mpnt to vma cleanup
freepgt-hugetlb-area-is-clean.patch
freepgt: hugetlb area is clean
eni155p-error-handling-fix.patch
ENI155P error handling fix
remove-last_rx-update-from-loopback-device.patch
remove last_rx update from loopback device
a-new-10gb-ethernet-driver-by-chelsio-communications.patch
A new 10GB Ethernet Driver by Chelsio Communications
a-new-10gb-ethernet-driver-by-chelsio-communications-update.patch
A new 10GB Ethernet Driver by Chelsio Communications (update)
pcnet32-bug-79c975-fiber-fix.patch
pcnet32 79C975 fiber fix
dm9000-network-driver.patch
DM9000 network driver
null-pointer-bug-in-netpollc.patch
NULL pointer bug in netpoll.c
restore-ports-module-parameter-for-ip_nat_ftp-and-ip_nat_irc.patch
Restore ports module parameter for ip_nat_ftp and ip_nat_irc
e1000-flush-work-queues-on-remove.patch
e1000: flush work queues on remove
ipt-leak-fix.patch
memory leak in net/sched/ipt.c?
selinux-make-code-static-and-remove-unused-code.patch
SELinux: make code static and remove unused code
selinux-allow-mounting-of-filesystems-with-invalid-root-inode-context.patch
SELinux: allow mounting of filesystems with invalid root inode context
selinux-audit-unrecognized-netlink-messages.patch
SELinux: audit unrecognized netlink messages
selinux-add-name_connect-permission-check.patch
SELinux: add name_connect permission check
ppc32-fix-mv64x60-internal-sram-size.patch
ppc32: Fix mv64x60 internal SRAM size
ppc32-move-83xx-85xx-device-and-system-description-files.patch
ppc32: Move 83xx & 85xx device and system description files
ppc32-fix-config_serial_text_debug-support-on-83xx.patch
ppc32: Fix CONFIG_SERIAL_TEXT_DEBUG support on 83xx
ppc32-typo-fix-in-load-store-string-emulation.patch
ppc32: typo fix in load/store string emulation
ppc32-report-chipset-version-in-common-proc-cpuinfo-handling.patch
ppc32: Report chipset version in common /proc/cpuinfo handling
ppc32-dmasound-compilation-fix.patch
ppc32: dmasound compilation fix
ppc32-fix-sandpoint-soft-reboot.patch
ppc32: Fix Sandpoint Soft Reboot
ppc32-64-map-prefetchable-pci-without-guarded-bit.patch
ppc32/64: Map prefetchable PCI without guarded bit
ppc64-pci_dnc-use-pseries-reconfig-notifier.patch
ppc64: pci_dn.c: use pSeries reconfig notifier
ppc64-pseries_iommuc-use-pseries-reconfig-notifier.patch
ppc64: pSeries_iommu.c: use pSeries reconfig notifier
ppc64-fix-gcc4-compile-error-in-pacah.patch
ppc64: fix gcc4 compile error in paca.h
ppc64-fix-compile-error-in-promc.patch
ppc64: fix compile error in prom.c
ppc64-fix-linkage-error-on-g5.patch
ppc64: fix linkage error on G5
ppc64-fix-semtimedop-compat-syscall.patch
ppc64: fix semtimedop compat syscall
ppc64-fix-pseries-hcall-stubs.patch
ppc64: fix pseries hcall stubs
ppc64-make-numa=off-command-line-argument-work-again.patch
ppc64: Make numa=off command line argument work again
ppc64-fix-ethernet-phy-reset-on-imac-g5.patch
ppc64: Fix ethernet PHY reset on iMac G5
mips-linkage-fix.patch
mips linkage fix
x86-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
x86: reduce cacheline bouncing in cpu_idle_wait
x86-cmos-time-update-optimisation.patch
x86: CMOS time update optimisation
x86-cmos-time-update-optimisation-tidy.patch
x86-cmos-time-update-optimisation-tidy
x86-cmos-time-update-optimisation-locking-fix.patch
x86-cmos-time-update-optimisation locking fix
x86-cmos-time-update-optimisation-locking-fix-check.patch
x86-cmos-time-update-optimisation-locking-fix-check
x86-via-workaround.patch
x86: via workaround
via-irq-fixup-fix-warning-fix.patch
via-irq-fixup-fix-warning-fix
apm-fix-interrupts-enabled-in-device_power_up.patch
APM: fix interrupts enabled in device_power_up
rtc_lock-is-irq-safe.patch
rtc_lock is irq-safe
fix-put_user-for-80386.patch
fix put_user for 80386
es7000-legacy-mappings-update.patch
ES7000 Legacy Mappings Update
x86-fix-esp-corruption-cpu-bug-take-2.patch
x86: fix ESP corruption CPU bug (take 2)
x86-fix-esp-corruption-cpu-bug-take-2-fix.patch
x86-fix-esp-corruption-cpu-bug-take-2 fix
es7000-dmi-cleanup.patch
es7000 dmi cleanup
i386-add-kstack=n-option-from-x86_64.patch
i386: add kstack=N option (from x86_64)
reduce-inlined-x86-memcpy-by-2-bytes.patch
x86: reduce inlined memcpy by 2 bytes
rename-fpu_verify_area-to-fpu_access_ok.patch
rename FPU_*verify_area to FPU_*access_ok
x86_64-update-defconfig.patch
x86_64: Update defconfig
x86_64-separate-amd-cmp-detection-from-hyper-threading.patch
x86_64: Separate AMD CMP detection from Hyper Threading detection
x86_64-add-new-amd-cpuid-flags-to-cpuinfo.patch
x86_64: Add new AMD cpuid flags to cpuinfo
x86_64-add-an-64bit-entry-path-for-exec.patch
x86_64: Add an 64bit entry path for exec
x86_64-busses-array-is-only-indexed-with-a-8bit-value.patch
x86_64: Busses array is only indexed with a 8bit value, doesn't make sense
x86_64-fix-compilation-with-config_proc_fs=n.patch
x86_64: Fix compilation with CONFIG_PROC_FS=n
x86_64-move-hpet-selection-into-processor-specific.patch
x86_64: Move HPET selection into processor specific options
x86_64-remove-never-used-obsolete-file.patch
x86_64: Remove never used obsolete file
x86_64-fix-indentation-in-vsyscallc-no-functional.patch
x86_64: Fix indentation in vsyscall.c. No functional changes.
x86_64-nop-out-system-call-instruction-in-vsyscall-page.patch
x86_64: Nop out system call instruction in vsyscall page when not needed
x86_64-remove-obsolete-comments-in-vsyscallc-and-fix.patch
x86_64: Remove obsolete comments in vsyscall.c and fix some others.
x86_64-remove-noisy-printk-in-k8-bus-detection-code.patch
x86_64: Remove noisy printk in K8 bus detection code
x86_64-remove-unused-and-broken-code-in-ioh.patch
x86_64: Remove unused and broken code in io.h
x86_64-remove-stale-unused-file.patch
x86_64: Remove stale unused file
x86_64-move-put_user-out-of-line.patch
x86_64: Move put_user out of line
x86_64-give-out-of-line-get_user-better-calling.patch
x86_64: Give out of line get_user better calling conventions
x86_64-work-around-tyan-bios-mtrr-initialization-bug.patch
x86_64: Work around Tyan BIOS MTRR initialization bug.
x86_64-include-pci-express-configuration.patch
x86_64: Include PCI-Express configuration
x86_64-cleanups-in-new-backtrace-code-in-oprofile.patch
x86_64: Cleanups in new backtrace code in oprofile
x86_64-fix-special-isa-case-in-iounmap.patch
x86_64: Fix special ISA case in iounmap()
x86_64-fix-formatting-and-white-space-in-signal-code.patch
x86_64: Fix formatting and white space in signal code
x86_64-mem=xxx-will-now-limit-kernel-memory-to-xxx.patch
x86_64: mem=XXX will now limit kernel memory to XXX instead of XXX+1MB
x86_64-resume-pit-for-x86_64.patch
x86_64: resume PIT for x86_64
x86_64-fix-nmi-rtc-access-race.patch
x86_64: Fix NMI RTC access race
x86_64-minor-fix-to-tlb-flush-ipi.patch
x86_64: Minor fix to TLB flush IPI
x86_64-always-reload-cr3-completely-when-a-lazy-mm.patch
x86_64: Always reload CR3 completely when a lazy MM thread drops a MM.
x86_64-fix-ldt-descriptor.patch
x86_64: Fix LDT descriptor
x86_64-change-the-y2069-bug-in-the-rtc-timer-code-to-be.patch
x86_64: Change the y2069 bug in the RTC timer code to be a y2100 bug.
x86_64-only-free-pmds-and-puds-after-other-cpus-have.patch
x86_64: Only free PMDs and PUDs after other CPUs have been flushed
x86_64-dont-enable-interrupts-in-oopses.patch
x86_64: Don't enable interrupts in oopses unconditionally
x86_64-fix-smp-fallback-to-up.patch
x86_64: Fix SMP fallback to UP
x86_64-fix-config_preempt.patch
x86_64: Fix CONFIG_PREEMPT
x86_64-fix-exception-stack-detection-during-backtraces.patch
x86_64: Fix exception stack detection during backtraces
x86_64-fix-gcc-34-warning-in-bitopsc.patch
x86_64: Fix gcc 3.4 warning in bitops.c
x86_64-clean-up-the-iommu-initialisation-a-bit.patch
x86_64: Clean up the IOMMU initialisation a bit
x86-64-kconfig-typo-trivial.patch
x86-64: kconfig typo
x86_64-remove-old-decl-trivial.patch
x86_64: remove old decl (trivial)
x86_64-avoid-panic-lockup.patch
x86_64: avoid panic lockup
x86_64-hugetlb-fix.patch
x86_64: hugetlb fix
x86-64-forgot-asmlinkage-on-sys_mmap.patch
x86-64: forgot asmlinkage on sys_mmap
x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
x86_64: reduce cacheline bouncing in cpu_idle_wait
x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait-warning-fix.patch
x86_64-reduce-cacheline-bouncing-in-cpu_idle_wait-warning-fix
x86-64-kprobes-handle-%rip-relative-addressing-mode.patch
x86-64 kprobes: handle %RIP-relative addressing mode
kernel-parameters-ia-32-x86-64-cleanups.patch
kernel-parameters: IA-32/X86-64 cleanups
x86-x86_64-reading-deterministic-cache-parameters-and-exporting-it-in-sysfs.patch
x86, x86_64: reading deterministic cache parameters and exporting it in /sysfs
x86-x86_64-intel-dual-core-detection.patch
x86, x86_64: Intel dual-core detection
x86-cacheline-alignment-for-cpu-maps.patch
x86: cacheline alignment for cpu maps
x86_64-dump-stack-in-early-exception.patch
x86_64-dump-stack-in-early-exception
alpha-spinlockh-update.patch
alpha spinlock.h update
ia64-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
ia64: reduce cacheline bouncing in cpu_idle_wait
ia64-reduce-cacheline-bouncing-in-cpu_idle_wait-fix.patch
ia64-reduce-cacheline-bouncing-in-cpu_idle_wait fix
swsusp-add-missing-refrigerator-calls.patch
swsusp: Add missing refrigerator calls
suspend-to-ram-update-videotxt-with-more-systems.patch
suspend-to-ram: update video.txt with more systems
pm-remove-obsolete-pm_-from-vtc.patch
pm: remove obsolete pm_* from vt.c
swsusp-small-updates.patch
swsusp: small updates
swsusp-1-1-kill-swsusp_restore.patch
swsusp: kill swsusp_restore
m32r-update-mmu-less-support-1.patch
m32r: Update MMU-less support #1
m32r-update-mmu-less-support-2.patch
m32r: Update MMU-less support #2
m32r-update-mmu-less-support-3.patch
m32r: Update MMU-less support #3
m32r-fix-m32102-i-cache-invalidation.patch
m32r: Fix M32102 I-cache invalidation
m32r_sio-driver-update.patch
m32r_sio driver update
m68k-update-signal-delivery-handling.patch
M68k: Update signal delivery handling
m68k-stdma-replace-sleep_on-with-wait_event.patch
M68k/stdma: Replace sleep_on() with wait_event()
zorro-replace-printk-with-pr_info-in-drivers-zorro-zorroc.patch
Zorro: replace printk() with pr_info() in drivers/zorro/zorro.c
mac-ncr5380-scsi-fix-bus-error.patch
Mac NCR5380 SCSI: Fix bus error
m68k-ip-checksum-updates.patch
M68k: IP checksum updates
sun-3-3x-enable-sun-partition-tables-support-by-default.patch
Sun-3/3x: Enable Sun partition tables support by default
m68k-add-missing-pieces-of-thread-info-tif_memdie-support.patch
M68k: Add missing pieces of thread info TIF_MEMDIE support
tpm-depends-on-pci.patch
TPM depends on PCI
uml-cope-with-uml_net-security-fix-2.patch
uml: cope with uml_net security fix
uml-fix-compile.patch
uml: fix compile
uml-cpu_relax-fix.patch
uml: cpu_relax fix
uml-extend-cmd-line-limits.patch
uml: extend cmd line limits
uml-disable-more-hardware-kconfig-opt-and-rename-usermode-to-uml.patch
uml: disable more hardware kconfig opt and rename USERMODE to UML
uml-little-build-fixes.patch
Uml: little build fixes
uml-factor-out-common-code-in-user-obj-handling.patch
uml: factor out common code in user-obj handling
uml-kbuild-link-cmd.patch
uml - kbuild: link cmd
uml-add-kconfig-debug-deps.patch
uml: add kconfig debug deps
uml-real-fix-for-__gcov_init-symbols.patch
uml: real fix for __gcov_init symbols
uml-fix-cond-expr-as-lvalues-warning.patch
Subject: [patch 12/12] uml: fix "cond. expr. as lvalues" warning
s390-swapped-memset-arguments.patch
s390: swapped memset arguments.
make-sysrq-f-call-oom_kill.patch
make sysrq-F call oom_kill()
mtrr-size-and-base-debug.patch
mtrr size-and-base debugging
cant-unmount-bad-inode.patch
Can't unmount bad inode
iounmap-debugging.patch
iounmap debugging
detect-soft-lockups.patch
detect soft lockups
detect-soft-lockups-from-touch_nmi_watchdog.patch
detect-soft-lockups: call from touch_nmi_watchdog
areca-raid-linux-scsi-driver.patch
ARECA RAID Linux scsi driver
rt-lsm.patch
RT-LSM
tty-output-lossage-fix.patch
tty output lossage fix
cx24110-conexant-frontend-update.patch
cx24110 Conexant Frontend update
nice-and-rt-prio-rlimits.patch
nice and rt-prio rlimits
relayfs.patch
relayfs
relayfs-backing_dev-fix.patch
relayfs-backing_dev-fix
cfq-iosched-update-to-time-sliced-design.patch
cfq-iosched: update to time sliced design
cfq-iosched-update-to-time-sliced-design-export-task_nice.patch
cfq-iosched-update-to-time-sliced-design-export-task_nice
cfq-iosched-update-to-time-sliced-design-fix.patch
cfq-iosched-update-to-time-sliced-design fix
cfq-iosched-update-to-time-sliced-design-fix-fix.patch
cfq-iosched-update-to-time-sliced-design-fix-fix
cfq-iosched-update-to-time-sliced-design-use-bio_data_dir.patch
cfq-iosched-update-to-time-sliced-design: use bio_data_dir()
cfq-ioschedc-fix-soft-hang-with-non-fs-requests.patch
cfq-iosched.c: fix soft hang with non-fs requests
keys-discard-key-spinlock-and-use-rcu-for-key-payload.patch
keys: Discard key spinlock and use RCU for key payload
keys-discard-key-spinlock-and-use-rcu-for-key-payload-try-4.patch
keys: Discard key spinlock and use RCU for key payload - try #4
keys-pass-session-keyring-to-call_usermodehelper.patch
Keys: Pass session keyring to call_usermodehelper()
keys-pass-session-keyring-to-call_usermodehelper-warning-fix.patch
keys-pass-session-keyring-to-call_usermodehelper-warning-fix
keys-use-rcu-to-manage-session-keyring-pointer.patch
Keys: Use RCU to manage session keyring pointer
keys-make-request-key-create-an-authorisation-key.patch
Keys: Make request-key create an authorisation key
stallion-driver-module-clean-up.patch
Stallion driver module clean up
use-__init-and-__exit-in-pktcdvd.patch
Use __init and __exit in pktcdvd
dvd-ram-support-for-pktcdvd.patch
DVD-RAM support for pktcdvd
break_lock-fix-2.patch
break_lock fix
cdrom-cdu31a-cleanups.patch
cdrom/cdu31a: cleanups
cdrom-cdu31a-locking-fixes.patch
cdrom/cdu31a: locking fixes
cdrom-cdu31a-use-wait_event.patch
cdrom/cdu31a: use wait_event
revert-gconfig-changes.patch
revert recent gconfig changes
revert-gconfig-changes-build-fix.patch
revert-gconfig-changes build fix
enable-gcc-warnings-for-vsprintf-vsnprintf-with-format-attribute.patch
Enable gcc warnings for vsprintf/vsnprintf with "format" attribute
w6692-eliminate-bad-section-references.patch
w6692: eliminate bad section references
teles3-eliminate-bad-section-references.patch
teles3: eliminate bad section references
elsa-eliminate-bad-section-references.patch
elsa eliminate bad section references
hfc_sx-eliminate-bad-section-references.patch
hfc_sx: eliminate bad section references
sedlbauer-eliminate-bad-section-references.patch
sedlbauer: eliminate bad section references
fix-mprotect-with-len=size_t-1-to-return-enomem.patch
fix mprotect() with len=(size_t)(-1) to return -ENOMEM
checkstack-fix-sort-misbehavior-for-long-function-names.patch
checkstack: fix sort misbehavior for long function names
fix-irq_affinity-write-from-proc-for-ia64.patch
Fix irq_affinity write from /proc for ia64
fix-mmap-return-value-to-conform-posix.patch
fix mmap() return value to conform POSIX
fix-mmap-return-value-to-conform-to-posix.patch
fix mmap() return value to conform to POSIX
exports-to-enable-clock-driver-modules.patch
Exports to enable clock driver modules
per-cpu-irq-stat.patch
Per cpu irq stat
kill-drivers-cdrom-mcdc.patch
kill drivers/cdrom/mcd.c
drivers-char-isicomc-gcc4-fix.patch
drivers/char/isicom.c gcc4 fix
infiniband-remove-unsafe-use-of-in_atomic.patch
InfiniBand: remove unsafe use of in_atomic()
new-console-flag-con_boot.patch
New console flag: CON_BOOT
new-console-flag-con_boot-comment.patch
new-console-flag-con_boot-comment
pipe-save-one-pipe-page.patch
pipe: save one pipe page
kprobes-incorrect-spin_unlock_irqrestore-call-in-register_kprobe.patch
kprobes: incorrect spin_unlock_irqrestore() call in register_kprobe()
ext2_make_empty-information-leak.patch
ext2_make_empty information leak fix
missing-set_fs-calls-around-kernel-syscall.patch
Missing set_fs() calls around kernel syscall
cpusets-mems-generation-deadlock-fix.patch
cpusets: mems generation deadlock fix
cpusets-alloc-gfp_wait-sleep-fix.patch
cpusets: alloc GFP_WAIT sleep fix
mtrr-uaccess-range-checking-fix.patch
mtrr: uaccess range checking fix
cciss-range-checking-fix.patch
cciss: range chcking fix
fix-posix-timers-expiring-before-their-scheduled-time.patch
Fix POSIX timers expiring before their scheduled time
fix-oops-when-inserting-ipmi_si-module.patch
Fix oops when inserting ipmi_si module
binfmt_elf-bss-padding-fix.patch
binfmt_elf bss padding fix
posix-cpu-timers-and-cputime_t-divisons.patch
posix-cpu-timers and cputime_t divisons.
timers-prepare-for-del_timer_sync-changes.patch
timers: prepare for del_timer_sync() changes
timers-rework-del_timer_sync.patch
timers: rework del_timer_sync()
timers-serialize-timers.patch
timers: serialize timers
timers-remove-memory-barriers.patch
timers: remove memory barriers
timers-cleanup-kill-__get_base.patch
timers: cleanup, kill __get_base()
timers-enable-irqs-in-__mod_timer.patch
timers: enable irqs in __mod_timer()
timers-enable-irqs-in-__mod_timer-tidy.patch
timers-enable-irqs-in-__mod_timer-tidy
ext2-3-file-limits-to-avoid-overflowing-i_blocks.patch
ext2/3 file limits to avoid overflowing i_blocks
load_elf_library-kfree-fix.patch
load_elf_library kfree fix
futex-queue_me-get_user-ordering-fix.patch
Futex: make futex_wait() atomic again
io_remap_pfn_range-add-for-all-arch-es.patch
io_remap_pfn_range: add for all arch-es
io_remap_pfn_range-add-for-all-arch-es-fix.patch
io_remap_pfn_range-add-for-all-arch-es-fix
io_remap_pfn_range-convert-sparc-callers.patch
io_remap_pfn_range: convert sparc callers
io_remap_pfn_range-fix-some-callers-for-xen.patch
io_remap_pfn_range: fix some callers for XEN
io_remap_pfn_range-convert-last-callers.patch
io_remap_pfn_range: convert last callers
alpha-build-fixes.patch
alpha build fixes
fix-pcmcia-resume-with-card-inserted.patch
Fix PCMCIA resume with card inserted
pcmcia-clean-up-suspend.patch
pcmcia: clean up suspend
small-warning-fix-for-gcc4.patch
small warning fix for gcc4
enable-sig_ign-on-blocked-signals.patch
Enable SIG_IGN on blocked signals
alpha-elimitate-two-warnings-from-gcc4.patch
alpha: elimitate two warnings from gcc4
fat-set-ms_noatime-to-msdos.patch
FAT: set MS_NOATIME to msdos
fat-fix-msdos-datetime.patch
FAT: Fix msdos ->[ac]{date,time}
fix-compile-warning-in-drivers-pnp-resourcec-with-config_pci.patch
Fix compile warning in drivers/pnp/resource.c with !CONFIG_PCI
nlm-fix-f_count-leak.patch
nlm: fix f_count leak
module-parameter-fixes.patch
module parameter fixes
fs-hpfs-fix-hpfs-support-under-64-bit-kernel.patch
fs/hpfs/*: fix HPFS support under 64-bit kernel
arch-hook-for-notifying-changes-in-pte-protections-bits.patch
arch hook for notifying changes in PTE protections bits
serial-digi-neo-driver.patch
serial: Digi Neo driver
netmos-parallel-serial-combo-support.patch
Netmos parallel/serial/combo support
consolidate-asm-ipch.patch
consolidate asm/ipc.h
bt819-array-indexing-fix.patch
bt819 array indexing fix
unified-spinlock-initialization.patch
unified spinlock initialization
drivers-block-dac960c-fix-a-use-after-free.patch
drivers/block/DAC960.c: fix a use after free
drivers-telephony-ixj-fix-a-use-after-free.patch
drivers/telephony/ixj: fix a use after free
hfs-free-page-buffers-in-releasepage.patch
hfs: free page buffers in releasepage
hfs-fix-umask-behaviour.patch
hfs: fix umask behaviour
hfs-more-bnode-error-checks.patch
hfs: more bnode error checks
hfs-fix-sign-problem-in-hfs_ext_keycmp.patch
hfs: fix sign problem in hfs_ext_keycmp
hfs-use-parse-library-for-mount-options.patch
hfs: use parse library for mount options
hfs-add-nls-support.patch
hfs: add nls support
hfs-unicode-decompose-support.patch
hfs: unicode decompose support
inotify-42.patch
inotify #42
dvb-clarify-firmware-upload-messages.patch
dvb: clarify firmware upload messages
dvb-dibcom-frontend-fixes.patch
dvb: dibcom: frontend fixes
dvb-dibusb-misc-fixes.patch
dvb: dibusb: misc. fixes
dvb-skystar2-remove-duplicate-pci_release_region.patch
dvb: skystar2: remove duplicate pci_release_region()
dvb-mt352-pinnacle-300i-comments.patch
dvb: mt352: Pinnacle 300i comments
dvb-support-activy-budget-card.patch
dvb: support Activy Budget card
dvb-skystar2-update-email-address.patch
dvb: skystar2: update email address
dvb-ves1x93-invert_pwm-fix.patch
dvb: ves1x93: invert_pwm fix
dvb-dibusb-readme-update.patch
dvb: dibusb readme update
dvb-dibusb-support-hauppauge-wintv-nova-t-usb2.patch
dvb: dibusb: support Hauppauge WinTV NOVA-T USB2
dvb-nxt2002-qam64-256-support.patch
dvb: nxt2002: QAM64/256 support
dvb-get_dvb_firmware-new-unshield-version.patch
dvb: get_dvb_firmware: new unshield version
dvb-dib3000-corrected-device-naming.patch
dvb: dib3000: corrected device naming
dvb-dibusb-debug-changes.patch
dvb: dibusb: debug changes
dvb-dibusb-increased-the-number-of-urbs-for-usb11-devices.patch
dvb: dibusb: increased the number of urbs for usb1.1 devices
dvb-ttusb_dec-use-alternative-interface-to-save-bandwidth.patch
dvb: ttusb_dec: use alternative interface to save bandwidth
dvb-l64781-email-address-fix.patch
dvb: l64781: email address fix
dvb-skystar2-fix-mac-address-reading.patch
dvb: skystar2: fix MAC address reading
dvb-support-kworld-adstech-instant-dvb-t-usb20.patch
dvb: support KWorld/ADSTech Instant DVB-T USB2.0
dvb-cleanups-make-stuff-static.patch
dvb: cleanups, make stuff static
dvb-refactor-sw-pid-filter-to-drop-redundant-code.patch
dvb: refactor sw pid filter to drop redundant code
dvb-nxt2002-fix-max-frequency.patch
dvb: nxt2002: fix max frequency
dvb-ttusb-budget-s-usb_unlink_urb-usb_kill_urb.patch
dvb: ttusb-budget: s/usb_unlink_urb/usb_kill_urb/
dvb-av7110-fix-oops-when-av7110_ir_init-failed.patch
dvb: av7110: fix Oops when av7110_ir_init() failed
dvb-saa7146-static-initialization.patch
dvb: saa7146: static initialization
dvb-av7110-error-handling-during-attach.patch
dvb: av7110: error handling during attach
dvb-corrected-links-to-firmware-files.patch
dvb: corrected links to firmware files
dvb-support-pchdtv-hd2000.patch
dvb: support pcHDTV HD2000
dvb-dibusb-support-nova-t-usb-ir.patch
dvb: dibusb: support nova-t usb ir
dvb-oren-or51211-or51132_qam-and-or51132_vsb-firmware-download-info.patch
dvb: OREN or51211, or51132_qam and or51132_vsb firmware download info
dvb-ttusb_dec-ir-support.patch
dvb: ttusb_dec: IR support
dvb-dibusb-pll-fix.patch
dvb: dibusb: pll fix
dvb-tda10021-fix-continuity-errors.patch
dvb: tda10021: fix continuity errors
dvb-saa7146-remove-duplicate-setgpio.patch
dvb: saa7146: remove duplicate setgpio
dvb-fix-cams-on-typhoon-dvb-s.patch
dvb: fix CAMs on Typhoon DVB-S
dvb-frontends-kfree-cleanup.patch
dvb: frontends: kfree() cleanup
dvb-clear-up-confusion-between-ids-and-adapters.patch
dvb: clear up confusion between ids and adapters
dvb-dibusb-remove-useless-ifdef.patch
dvb: dibusb: remove useless ifdef
dvb-support-for-technotrend-pci-dvb-t.patch
dvb: support for Technotrend PCI DVB-T
dvb-dibusb-hanftek-umt-010-fixes.patch
dvb: dibusb: HanfTek UMT-010 fixes
dvb-vfree-checking-cleanups.patch
dvb: vfree() checking cleanups
dvb-convert-from-pci_module_init-to-pci_register_driver.patch
dvb: convert from pci_module_init to pci_register_driver
dvb-dibusb-support-dtt200u-yakumo-typhoon-hama-usb20-device.patch
dvb: dibusb: support dtt200u (Yakumo/Typhoon/Hama) USB2.0 device
dvb-sparse-warnings-on-one-bit-bitfields.patch
dvb: sparse warnings on one-bit bitfields
dvb-support-nova-s-rev-22.patch
dvb: support Nova-S rev 2.2
dvb-ttusb_dec-cleanup.patch
dvb: ttusb_dec: cleanup
dvb-gcc-295-compile-fixes.patch
dvb: gcc 2.95 compile fixes
dvb-mt352-cleanups.patch
dvb: mt352: cleanups
ext3-jbd-race-releasing-in-use-journal_heads.patch
ext3/jbd race: releasing in-use journal_heads
ext3-writepages-support-for-writeback-mode.patch
ext3 writepages support for writeback mode
ext3-writeback-nobh-option.patch
ext3 writeback "nobh" option
ext3-fix-journal_unmap_buffer-race.patch
ext3: fix journal_unmap_buffer race
ext3-dynamic-allocating-block-reservation-info.patch
ext3: dynamic allocation of block reservation info
ext3-reservation-info-cleanup-remove-rsv_seqlock.patch
ext3: reservation info cleanup: remove rsv_seqlock
ext3-reservation-info-cleanup-remove-rsv_seqlock-fix.patch
ext3-reservation-info-cleanup-remove-rsv_seqlock fix
ext3-move-goal-logical-block-into-block-allocation-info.patch
ext3: move goal logical block into block allocation info structure
pcmcia-hotplug-event-for-pcmcia-devices.patch
pcmcia: hotplug event for PCMCIA devices
pcmcia-hotplug-event-for-pcmcia-socket-devices.patch
pcmcia: hotplug event for PCMCIA socket devices
pcmcia-device-and-driver-matching.patch
pcmcia: device and driver matching
pcmcia-check-for-invalid-crc32-hashes-in-id_tables.patch
pcmcia: check for invalid crc32 hashes in id_tables
pcmcia-match-for-fake-cis.patch
pcmcia: match for fake CIS
pcmcia-export-cis-in-sysfs.patch
pcmcia: export CIS in sysfs
pcmcia-cis-overrid-via-sysfs.patch
pcmcia: CIS overrid via sysfs
pcmcia-match-anonymous-cards.patch
pcmcia: match "anonymous" cards
pcmcia-allow-function-id-based-match.patch
pcmcia: allow function-ID based match
pcmcia-file2alias.patch
pcmcia: file2alias
pcmcia-request-cis-via-firmware-interface.patch
pcmcia: request CIS via firmware interface
pcmcia-cleanups.patch
pcmcia: cleanups
pcmcia-rescan-bus-always-upon-echoing-into-setup_done.patch
pcmcia: rescan bus always upon echoing into setup_done
pcmcia-id_table-for-serial_cs.patch
pcmcia: id_table for serial_cs
pcmcia-id_table-for-3c574_cs.patch
pcmcia: id_table for 3c574_cs
pcmcia-id_table-for-3c589_cs.patch
pcmcia: id_table for 3c589_cs
pcmcia-id_table-for-aha152x.patch
pcmcia: id_table for aha152x
pcmcia-id_table-for-airo_cs.patch
pcmcia: id_table for airo_cs
pcmcia-id_table-for-axnet_cs.patch
pcmcia: id_table for axnet_cs
pcmcia-id_table-for-fdomain_stub.patch
pcmcia: id_table for fdomain_stub
pcmcia-id_table-for-fmvj18x_cs.patch
pcmcia: id_table for fmvj18x_cs
pcmcia-id_table-for-ibmtr_cs.patch
pcmcia: id_table for ibmtr_cs
pcmcia-id_table-for-netwave_cs.patch
pcmcia: id_table for netwave_cs
pcmcia-id_table-for-nmclan_cs.patch
pcmcia: id_table for nmclan_cs
pcmcia-id_table-for-teles_cs.patch
pcmcia: id_table for teles_cs
pcmcia-id_table-for-ray_cs.patch
pcmcia: id_table for ray_cs
pcmcia-id_table-for-wavelan_cs.patch
pcmcia: id_table for wavelan_cs
pcmcia-id_table-for-sym53c500_csc.patch
pcmcia: id_table for sym53c500_cs.c
pcmcia-id_table-for-qlogic_stubc.patch
pcmcia: id_table for qlogic_stub.c
pcmcia-id_table-for-smc91c92_csc.patch
pcmcia: id_table for smc91c92_cs.c
pcmcia-id_table-for-orinoco_cs.patch
pcmcia: id_table for orinoco_cs
pcmcia-id_table-for-xirc2ps_csc.patch
pcmcia: id_table for xirc2ps_cs.c
pcmcia-id_table-for-ide_csc.patch
pcmcia: id_table for ide_cs.c
pcmcia-id_table-for-parport_csc.patch
pcmcia: id_table for parport_cs.c
pcmcia-id_table-for-pcnet_csc.patch
pcmcia: id_table for pcnet_cs.c
pcmcia-id_table-for-pcmciamtdc.patch
pcmcia: id_table for pcmciamtd.c
pcmcia-id_table-for-vxpocketc.patch
pcmcia: id_table for vxpocket.c
pcmcia-id_table-for-atmel_csc.patch
pcmcia: id_table for atmel_cs.c
pcmcia-id_table-for-avma1_csc.patch
pcmcia: id_table for avma1_cs.c
pcmcia-id_table-for-avm_csc.patch
pcmcia: id_table for avm_cs.c
pcmcia-id_table-for-bluecard_csc.patch
pcmcia: id_table for bluecard_cs.c
pcmcia-id_table-for-bt3c_csc.patch
pcmcia: id_table for bt3c_cs.c
pcmcia-id_table-for-btuart_csc.patch
pcmcia: id_table for btuart_cs.c
pcmcia-id_table-for-com20020_csc.patch
pcmcia: id_table for com20020_cs.c
pcmcia-id_table-for-dtl1_csc.patch
pcmcia: id_table for dtl1_cs.c
pcmcia-id_table-for-elsa_csc.patch
pcmcia: id_table for elsa_cs.c
pcmcia-id_table-for-ixj_pcmciac.patch
pcmcia: id_table for ixj_pcmcia.c
pcmcia-id_table-for-nsp_csc.patch
pcmcia: id_table for nsp_cs.c
pcmcia-id_table-for-sedlbauer_csc.patch
pcmcia: id_table for sedlbauer_cs.c
pcmcia-id_table-for-wl3501_csc.patch
pcmcia: id_table for wl3501_cs.c
pcmcia-id_table-for-pdaudiocfc.patch
pcmcia: id_table for pdaudiocf.c
pcmcia-id_table-for-synclink_csc.patch
pcmcia: id_table for synclink_cs.c
pcmcia-add-some-documentation.patch
pcmcia: add some Documentation
pcmcia-update-resource-database-adjust-routines-to-use-unsigned-long-values.patch
pcmcia: update resource database adjust routines to use unsigned long values
pcmcia-mark-parent-bridge-windows-as-resources-available-for-pcmcia-devices.patch
pcmcia: mark parent bridge windows as resources available for PCMCIA devices
pcmcia-add-a-config-option-for-the-pcmica-ioctl.patch
pcmcia: add a config option for the PCMICA ioctl
pcmcia-move-pcmcia-ioctl-to-a-separate-file.patch
pcmcia: move PCMCIA ioctl to a separate file
pcmcia-clean-up-cs-ds-callback.patch
pcmcia: clean up cs ds callback
pcmcia-clean-up-cs-ds-callback-fix.patch
pcmcia-clean-up-cs-ds-callback-fix
pcmcia-make-pcmcia-status-a-bitfield.patch
pcmcia: make PCMCIA status a bitfield
pcmcia-merge-struct-pcmcia_bus_socket-into-struct-pcmcia_socket.patch
pcmcia: merge struct pcmcia_bus_socket into struct pcmcia_socket
pcmcia-remove-unneeded-includes-in-dsc.patch
pcmcia: remove unneeded includes in ds.c
pcmcia-rename-some-functions.patch
pcmcia: rename some functions
pcmcia-move-pcmcia-resource-handling-out-of-csc.patch
pcmcia: move pcmcia resource handling out of cs.c
pcmcia-csc-cleanup.patch
pcmcia: cs.c cleanup
pcmcia-dsc-cleanup.patch
pcmcia: ds.c cleanup
pcmcia-release_class.patch
pcmcia: release_class
pcmcia-use-request_region-in-i82365.patch
pcmcia: use request_region in i82365
pcmcia-synclink_cs-irq_info2_info-is-gone.patch
pcmcia: synclink_cs IRQ_INFO2_INFO is gone
pcmcia-mod_devicetableh-fix-for-different-sizes-in-kernel-and-userspace.patch
pcmcia: mod_devicetable.h fix for different sizes in kernel- and userspace
pcmcia-select-crc32-in-kconfig-for-pcmcia.patch
pcmcia: select crc32 in Kconfig for PCMCIA
svcrpc-auth_domain-documentation.patch
svcrpc: auth_domain documentation
nfsd4-fix-share-conflict-tests.patch
nfsd4: fix share conflict tests
nfsd4-remove-unneeded-stateowner-arguments.patch
nfsd4: remove unneeded stateowner arguments
nfsd4-fix-use-after-put-in-cb_recall.patch
nfsd4: fix use after put() in cb_recall
nfsd4-allow-read-on-open-for-write.patch
nfsd4: allow read on open for write
nfsd4-factor-out-common-open_truncate-code.patch
nfsd4: factor out common open_truncate code
nfsd4-fix-failure-to-truncate-on-some-opens.patch
nfsd4: fix failure to truncate on some opens
nfsd4_remove_unused_acl_function.patch
nfsd4_remove_unused_acl_function
nfsd4-dont-set-write_owner-in-either-allow-or-deny-bits.patch
nfsd4: don't set WRITE_OWNER in either allow or deny bits
nfsd4-acl-dont-set-named-attrs.patch
nfsd4: acl don't set named attrs
nfsd4-acl-error-fix.patch
nfsd4: acl error fix
nfsd4-rename-release_delegation.patch
nfsd4: rename release_delegation
nfsd4-remove-trailing-whitespace-from-nfs4procc.patch
nfsd4: remove trailing whitespace from nfs4proc.c
nfsd4-fix-open-returns-for-other-claim-types.patch
nfsd4: fix open returns for other claim types
nfsd4-fix-indentation-in-nfsd4_open.patch
nfsd4: fix indentation in nfsd4_open
nfsacl-solaris-nfsacl-workaround.patch
nfsacl: Solaris nfsacl workaround
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks
kgdb-ga.patch fix for i386 single-step into sysenter
fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386
kgdb-is-incompatible-with-kprobes
kgdb-ga-build-fix
kgdb-ga-fixes
kgdb: kill off highmem_start_page
kgdb documentation fix
kgdb-x86-config_debug_info-fix.patch
kgdb CONFIG_DEBUG_INFO fix
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-x86_64-fix
kgdb-x86_64-serial-fix
kprobes exception notifier fix
kgdb-x86_64-config_debug_info-fix.patch
kgdb CONFIG_DEBUG_INFO fix
rock-lindent.patch
rock: lindent it
rock-manual-tidies.patch
rock: manual tidies
rock-remove-CHECK_SP.patch
rock: remove CHECK_SP
rock-remove-CONTINUE_DECLS.patch
rock: remove CONTINUE_DECLS
rock-remove-CHECK_CE.patch
rock: remove CHECK_CE
rock-remove-SETUP_ROCK_RIDGE.patch
rock: remove SETUP_ROCK_RIDGE
rock-remove-MAYBE_CONTINUE.patch
rock: remove MAYBE_CONTINUE
rock-comment-tidies.patch
rock: comment tidies
rock-lindent-rock-h.patch
rock: lindent rock.h
isofs-remove-debug-stuff.patch
isofs: remove debug stuff
rock-handle-corrupted-directories.patch
rock.c: handle corrupted directories
rock-rename-union-members.patch
rock: rename union members
rock-handle-directory-overflows.patch
rock: handle directory overflows
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
page-owner-tracking-leak-detector.patch
Page owner tracking leak detector
make-page_owner-handle-non-contiguous-page-ranges.patch
make page_owner handle non-contiguous page ranges
add-gfp_mask-to-page-owner.patch
add gfp_mask to page owner
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
periodically-scan-redzone-entries-and-slab-control-structures.patch
periodically scan redzone entries and slab control structures
slab-leak-detector.patch
slab leak detector
slab-leak-detector-warning-fixes.patch
slab leak detector warning fixes
irqpoll.patch
irqpoll
figure-out-who-is-inserting-bogus-modules.patch
Figure out who is inserting bogus modules
figure-out-who-is-inserting-bogus-modules-warning-fix.patch
Warning fix and be extra careful about array in kernel/module.c
releasing-resources-with-children.patch
Releasing resources with children
perfctr-core.patch
perfctr: core
perfctr: remove bogus perfctr_sample_thread() calls
perfctr-i386.patch
perfctr: i386
perfctr-x86-core-updates.patch
perfctr x86 core updates
perfctr-x86-driver-updates.patch
perfctr x86 driver updates
perfctr-x86-driver-cleanup.patch
perfctr: x86 driver cleanup
perfctr-prescott-fix.patch
Prescott fix for perfctr
perfctr-x86-update-2.patch
perfctr x86 update 2
perfctr-x86_64.patch
perfctr: x86_64
perfctr-x86_64-core-updates.patch
perfctr x86_64 core updates
perfctr-ppc.patch
perfctr: PowerPC
perfctr-ppc32-driver-update.patch
perfctr: ppc32 driver update
perfctr-ppc32-mmcr0-handling-fixes.patch
perfctr ppc32 MMCR0 handling fixes
perfctr-ppc32-update.patch
perfctr ppc32 update
perfctr-ppc32-update-2.patch
perfctr ppc32 update
perfctr-virtualised-counters.patch
perfctr: virtualised counters
perfctr-remap_page_range-fix.patch
virtual-perfctr-illegal-sleep.patch
virtual perfctr illegal sleep
make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-update-2-6-kconfig-related-updates.patch
perfctr: Kconfig-related updates
perfctr-virtual-updates.patch
perfctr virtual updates
perfctr-virtual-cleanup.patch
perfctr: virtual cleanup
perfctr-ppc32-preliminary-interrupt-support.patch
perfctr ppc32 preliminary interrupt support
perfctr-update-5-6-reduce-stack-usage.patch
perfctr: reduce stack usage
perfctr-interrupt-support-kconfig-fix.patch
perfctr interrupt_support Kconfig fix
perfctr-low-level-documentation.patch
perfctr low-level documentation
perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance: driver updates
perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance: kernel updates
perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance: documentation updates
perfctr-inheritance-locking-fix.patch
perfctr inheritance locking fix
perfctr-api-changes-first-step.patch
perfctr API changes: first step
perfctr-virtual-update.patch
perfctr virtual update
perfctr-x86-64-ia32-emulation-fix.patch
perfctr x86-64 ia32 emulation fix
perfctr-sysfs-update-1-4-core.patch
perfctr sysfs update: core
perfctr-sysfs-update.patch
Perfctr sysfs update
perfctr-sysfs-update-2-4-x86.patch
perfctr sysfs update: x86
perfctr-sysfs-update-3-4-x86-64.patch
perfctr sysfs update: x86-64
perfctr: syscall numbers in x86-64 ia32-emulation
perfctr x86_64 native syscall numbers fix
perfctr-sysfs-update-4-4-ppc32.patch
perfctr sysfs update: ppc32
perfctr-2710-api-update-1-4-common.patch
perfctr-2.7.10 API update 1/4: common
perfctr-2710-api-update-2-4-i386.patch
perfctr-2.7.10 API update 2/4: i386
perfctr-2710-api-update-3-4-x86_64.patch
perfctr-2.7.10 API update 3/4: x86_64
perfctr-2710-api-update-4-4-ppc32.patch
perfctr-2.7.10 API update 4/4: ppc32
perfctr-api-update-1-9-physical-indexing-x86.patch
perfctr API update 1/9: physical indexing, x86
perfctr-api-update-2-9-physical-indexing-ppc32.patch
perfctr API update 2/9: physical indexing, ppc32
perfctr-api-update-3-9-cpu_control_header-x86.patch
perfctr API update 3/9: cpu_control_header, x86
perfctr-api-update-4-9-cpu_control_header-ppc32.patch
perfctr API update 4/9: cpu_control_header, ppc32
perfctr-api-update-5-9-cpu_control_header-common.patch
perfctr API update 5/9: cpu_control_header, common
perfctr-api-update-6-9-cpu_control-access-common.patch
perfctr API update 6/9: cpu_control access, common
perfctr-api-update-7-9-cpu_control-access-x86.patch
perfctr API update 7/9: cpu_control access, x86
perfctr-api-update-8-9-cpu_control-access-ppc32.patch
perfctr API update 8/9: cpu_control access, ppc32
perfctr-api-update-9-9-domain-based-read-write-syscalls.patch
perfctr API update 9/9: domain-based read/write syscalls
perfctr-ia32-syscalls-on-x86-64-fix.patch
perfctr ia32 syscalls on x86-64 fix
perfctr-cleanups-1-3-common.patch
perfctr cleanups: common
perfctr-cleanups-2-3-ppc32.patch
perfctr cleanups: ppc32
perfctr-cleanups-3-3-x86.patch
perfctr cleanups: x86
perfctr-x86-fix-and-cleanups.patch
perfctr: x86 fix and cleanups
perfctr-ppc32-fix-and-cleanups.patch
perfctr: ppc32 fix and cleanups
perfctr-64-bit-values-in-register-descriptors.patch
perfctr: 64-bit values in register descriptors
perfctr-64-bit-values-in-register-descriptors-fix.patch
perfctr-64-bit-values-in-register-descriptors fix
sched2-fix-schedstats-warning.patch
sched: fix schedstats warning
sched2-cleanup-wake_idle.patch
sched: cleanup wake_idle
sched2-improve-load-balancing-pinned-tasks.patch
sched: improve load balancing pinned tasks
sched2-reduce-active-load-balancing.patch
sched: reduce active load balancing
sched2-fix-smt-scheduling-problems.patch
sched: fix SMT scheduling problems
sched2-add-debugging.patch
sched: add debugging
sched2-less-aggressive-idle-balancing.patch
sched: less aggressive idle balancing
sched2-balance-timers.patch
sched: balance timers
sched2-tweak-affine-wakeups.patch
sched: tweak affine wakeups
sched2-no-aggressive-idle-balancing.patch
sched: no aggressive idle balancing
sched2-balance-on-fork.patch
sched: balance on fork
sched2-schedstats-update-for-balance-on-fork.patch
sched: schedstats update for balance on fork
sched2-sched-tuning.patch
sched: sched tuning
sched2-sched-tuning-fix.patch
sched2-sched-tuning-fix
sched2-sched-domain-sysctl.patch
sched: sched domain sysctl
add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
Add do_proc_doulonglongvec_minmax to sysctl functions
add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix
add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2
allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention
i386-cpu-hotplug-updated-for-mm.patch
i386 CPU hotplug updated for -mm
ppc64: fix hotplug cpu
disable-atykb-warning.patch
disable atykb "too many keys pressed" warning
export-file_ra_state_init-again.patch
Export file_ra_state_init() again
cachefs-filesystem.patch
CacheFS filesystem
numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch
numa-policies-for-file-mappings-mpol_mf_move for cachefs
cachefs-release-search-records-lest-they-return-to-haunt-us.patch
CacheFS: release search records lest they return to haunt us
fix-64-bit-problems-in-cachefs.patch
Fix 64-bit problems in cachefs
cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
cachefs: fixed typos that cause wrong pointer to be kunmapped
cachefs-return-the-right-error-upon-invalid-mount.patch
CacheFS: return the right error upon invalid mount
fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
Fix CacheFS barrier handling and other kernel discrepancies
remove-error-from-linux-cachefsh.patch
Remove #error from linux/cachefs.h
cachefs-warning-fix-2.patch
cachefs warning fix 2
cachefs-linkage-fix-2.patch
cachefs linkage fix
cachefs-build-fix.patch
cachefs build fix
cachefs-documentation.patch
CacheFS documentation
add-page-becoming-writable-notification.patch
Add page becoming writable notification
add-page-becoming-writable-notification-fix.patch
do_wp_page_mk_pte_writable() fix
add-page-becoming-writable-notification-build-fix.patch
add-page-becoming-writable-notification build fix
provide-a-filesystem-specific-syncable-page-bit.patch
Provide a filesystem-specific sync'able page bit
provide-a-filesystem-specific-syncable-page-bit-fix.patch
provide-a-filesystem-specific-syncable-page-bit-fix
provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
provide-a-filesystem-specific-syncable-page-bit-fix-2
make-afs-use-cachefs.patch
Make AFS use CacheFS
afs-cachefs-dependency-fix.patch
afs-cachefs-dependency-fix
split-general-cache-manager-from-cachefs.patch
Split general cache manager from CacheFS
turn-cachefs-into-a-cache-backend.patch
Turn CacheFS into a cache backend
rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
Rework the CacheFS documentation to reflect FS-Cache split
update-afs-client-to-reflect-cachefs-split.patch
Update AFS client to reflect CacheFS split
fscache-menuconfig-help-fix-documentation-path.patch
fscache-menuconfig-help-fix-documentation-pathc
x86-rename-apic_mode_exint.patch
kexec: x86: rename APIC_MODE_EXINT
x86-local-apic-fix.patch
kexec: x86: local apic fix
x86_64-e820-64bit.patch
kexec: x86_64: e820 64bit fix
x86-i8259-shutdown.patch
kexec: x86: i8259 shutdown: disable interrupts
x86_64-i8259-shutdown.patch
kexec: x86_64: add i8259 shutdown method
x86-apic-virtwire-on-shutdown.patch
kexec: x86: resture apic virtual wire mode on shutdown
x86_64-apic-virtwire-on-shutdown.patch
kexec: x86_64: restore apic virtual wire mode on shutdown
vmlinux-fix-physical-addrs.patch
kexec: vmlinux: fix physical addresses
x86-vmlinux-fix-physical-addrs.patch
kexec: x86: vmlinux: fix physical addresses
x86_64-vmlinux-fix-physical-addrs.patch
kexec: x86_64: vmlinux: fix physical addresses
x86-config-kernel-start.patch
kexec: x86: add CONFIG_PYSICAL_START
kexec-reserve-bootmem-fix-for-booting-nondefault-location-kernel.patch
kexec: reserve Bootmem fix for booting nondefault location kernel
x86_64-config-kernel-start.patch
kexec: x86_64: add CONFIG_PHYSICAL_START
kexec-kexec-generic.patch
kexec: add kexec syscalls
kexec-kexec-generic-kexec-use-unsigned-bitfield.patch
kexec: use unsigned bitfield
x86-machine_shutdown.patch
kexec: x86: factor out apic shutdown code
x86-kexec.patch
kexec: x86 kexec core
x86-crashkernel.patch
crashdump: x86 crashkernel option
x86-crashkernel-fix.patch
kexec: fix for broken kexec on panic
x86_64-machine_shutdown.patch
kexec: x86_64: factor out apic shutdown code
x86_64-kexec.patch
kexec: x86_64 kexec implementation
x86_64-crashkernel.patch
crashdump: x86_64: crashkernel option
kexec-ppc-support.patch
kexec: kexec ppc support
kexec-ppc-fix-noret_type.patch
kexec: ppc: fix NORET_TYPE
x86-crash_shutdown-nmi-shootdown.patch
crashdump: x86: add NMI handler to capture other CPUs
x86-crash_shutdown-snapshot-registers.patch
kexec: x86: snapshot registers during crash shutdown
x86-crash_shutdown-apic-shutdown.patch
kexec: x86 shutdown APICs during crash_shutdown
crashdump-documentation.patch
crashdump: documentation
crashdump-memory-preserving-reboot-using-kexec.patch
crashdump: memory preserving reboot using kexec
crashdump-routines-for-copying-dump-pages.patch
crashdump: routines for copying dump pages
crashdump-routines-for-copying-dump-pages-fixes.patch
crashdump-routines-for-copying-dump-pages-fixes
crashdump-elf-format-dump-file-access.patch
crashdump: elf format dump file access
crashdump-linear-raw-format-dump-file-access.patch
crashdump: linear raw format dump file access
crashdump-linear-raw-format-dump-file-access-coding-style.patch
crashdump-linear-raw-format-dump-file-access-coding-style
kdump-export-crash-notes-section-address-through.patch
Kdump: Export crash notes section address through sysfs
kdump-export-crash-notes-section-address-through-build-fix.patch
kdump-export-crash-notes-section-address-through build fix
kdump-export-crash-notes-section-address-through-x86_64-fix.patch
kdump-export-crash-notes-section-address-through x86_64 fix
reiser4-sb_sync_inodes.patch
reiser4: vfs: add super_operations.sync_inodes()
reiser4-allow-drop_inode-implementation.patch
reiser4: export vfs inode.c symbols
reiser4-truncate_inode_pages_range.patch
reiser4: vfs: add truncate_inode_pages_range()
reiser4-export-remove_from_page_cache.patch
reiser4: export pagecache add/remove functions to modules
reiser4-export-page_cache_readahead.patch
reiser4: export page_cache_readahead to modules
reiser4-reget-page-mapping.patch
reiser4: vfs: re-check page->mapping after calling try_to_release_page()
reiser4-rcu-barrier.patch
reiser4: add rcu_barrier() synchronization point
reiser4-rcu-barrier-license-fix.patch
reiser4-rcu-barrier-license-fix
reiser4-export-inode_lock.patch
reiser4: export inode_lock to modules
reiser4-export-inode_lock-unexport-__iget.patch
reiser4-export-inode_lock-unexport-__iget
reiser4-export-pagevec-funcs.patch
reiser4: export pagevec functions to modules
reiser4-export-radix_tree_preload.patch
reiser4: export radix_tree_preload() to modules
reiser4-export-find_get_pages.patch
reiser4-radix_tree_lookup_slot.patch
reiser4: add radix_tree_lookup_slot()
reiser4-perthread-pages.patch
reiser4: per-thread page pools
reiser4-perthread_pages_alloc-cleanup.patch
perthread_pages_alloc cleanup
reiser4-include-reiser4.patch
reiser4: add to build system
reiser4-doc.patch
reiser4: documentation
reiser4-only.patch
reiser4: main fs
fs-reiser4-possible-cleanups.patch
fs/reiser4/: possible cleanups
reiser4-kconfig-help-cleanup.patch
reiser4 Kconfig help cleanup
reiser4-cleanup-pg_arch_1.patch
reiser4 cleanup (PG_arch_1)
reiser4-build-fix.patch
reiser4 build fix
reiser4-update.patch
reiser4 update
reiser4-only-memory_backed-fix.patch
reiser4-only-memory_backed-fix
add-acpi-based-floppy-controller-enumeration.patch
Add ACPI-based floppy controller enumeration.
possible-dcache-bug-debugging-patch.patch
Possible dcache BUG: debugging patch
serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
serial: add support for non-standard XTALs to 16c950 driver
add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
Add support for Possio GCC AKA PCMCIA Siemens MC45
generic-serial-cli-conversion.patch
generic-serial cli() conversion
specialix-io8-cli-conversion.patch
Specialix/IO8 cli() conversion
sx-cli-conversion.patch
SX cli() conversion
au1x00_uart-deadlock-fix.patch
au1x00_uart deadlock fix
wbsd-update.patch
wbsd update
remove-lock_section-from-x86_64-spin_lock-asm.patch
remove LOCK_SECTION from x86_64 spin_lock asm
kfree_skb-dump_stack.patch
kfree_skb-dump_stack
minimal-ide-disk-updates.patch
Minimal ide-disk updates
vt-dont-call-unblank-at-irq-time.patch
vt: don't call unblank at irq time
ppc32-move-powermac-backlight-stuff-to-a-workqueue.patch
ppc32: move powermac backlight stuff to a workqueue
radeonfb-implement-proper-workarounds-for-pll-accesses.patch
radeonfb: Implement proper workarounds for PLL accesses
radeonfb-ddc-i2c-fix.patch
radeonfb: DDC i2c fix
fbdev-nvidia-licensing-clarification.patch
fbdev: mvidia licensing clarification
fbcon-stop-framebuffer-operations-before-hardware-is-properly-initialized.patch
fbcon: Stop framebuffer operations before hardware is properly initialized
nvidiafb-maximize-blit-buffer-capacity.patch
nvidiafb: Maximize blit buffer capacity
pm2fb-x-and-vt-switching-crash-fix.patch
pm2fb: X and VT switching crash fix
nvidiafb-kconfig-help-text-update-for-config-fb_nvidia.patch
nvidiafb: Kconfig help text update for config FB_NVIDIA
fbdev-cleanups-in-drivers-video-part-2.patch
fbdev: Cleanups in drivers/video part 2
fbdev-cleanups-in-drivers-video-part-2-fix.patch
fbdev-cleanups-in-drivers-video-part-2 fix
excessive-atyfb-debug-messages.patch
Excessive atyfb debug messages
atyfb-add-boot-module-option-to-override-composite-sync.patch
atyfb: Add boot/module option to override composite sync
fbdev-kconfig-fix-for-macmodes-and-ppc.patch
fbdev: Kconfig fix for macmodes and PPC
fbdev-convert-drivers-to-pci_register_driver.patch
fbdev: Convert drivers to pci_register_driver
sisfb-trivial-cleanups.patch
sisfb: Trivial cleanups
tridentfb-clean-up-printks.patch
tridentfb: Clean up printk()'s
s1d13xxxfb-add-support-for-epson-s1d13806-fb.patch
s1d13xxxfb: Add support for Epson S1D13806 FB
nvidiafb-process-boot-options-earlier.patch
nvidiafb: Process boot options earlier
fbcon-save-var-rotate-field-in-struct-display.patch
fbcon: Save var rotate field in struct display
fbcon-call-set_par-per-fb_info-once-during-init.patch
fbcon: Call set_par per fb_info once during init
fbcon-do-not-set-palette-if-console-is-not-visible.patch
fbcon: Do not set palette if console is not visible
nvidiafb-delete-i2c-bus-on-driver-unload.patch
nvidiafb: Delete i2c bus on driver unload
neofb-mmio-fixes.patch
neofb: mmio fixes
neofb-set-hwaccel-flags-properly.patch
neofb: Set hwaccel flags properly
remove-redundant-null-checks-before-kfree-in-drivers-video.patch
remove redundant NULL checks before kfree() in drivers/video/
remove-redundant-null-checks-before-kfree-in-drivers-video-fix.patch
remove-redundant-null-checks-before-kfree-in-drivers-video fix
md-merge-md_enter_safemode-into-md_check_recovery.patch
md: merge md_enter_safemode into md_check_recovery
md-improve-locking-on-safemode-and-move-superblock-writes.patch
md: improve locking on 'safemode' and move superblock writes
md-improve-the-interface-to-sync_request.patch
md: improve the interface to sync_request
md-optimised-resync-using-bitmap-based-intent-logging.patch
md: optimised resync using Bitmap based intent logging
md-a-couple-of-tidyups-relating-to-the-bitmap-file.patch
md: a couple of tidyups relating to the bitmap file.
md-call-bitmap_daemon_work-regularly.patch
md: call bitmap_daemon_work regularly
md-print-correct-pid-for-newly-created-bitmap-writeback-daemon.patch
md: print correct pid for newly created bitmap-writeback-daemon.
md-minor-code-rearrangement-in-bitmap_init_from_disk.patch
md: minor code rearrangement in bitmap_init_from_disk
md-make-sure-md-bitmap-is-cleared-on-a-clean-start.patch
md: make sure md bitmap is cleared on a clean start.
md-printk-fix.patch
md printk fix
md-improve-debug-printing-of-bitmap-superblock.patch
md: improve debug-printing of bitmap superblock.
md-check-return-value-of-write_page-rather-than-ignore-it.patch
md: check return value of write_page, rather than ignore it
md-enable-the-bitmap-write-back-daemon-and-wait-for-it.patch
md: enable the bitmap write-back daemon and wait for it.
md-dont-skip-bitmap-pages-due-to-lack-of-bit-that-we-just-cleared.patch
md: don't skip bitmap pages due to lack of bit that we just cleared.
md-optimised-resync-using-bitmap-based-intent-logging-fix.patch
md-optimised-resync-using-bitmap-based-intent-logging fix
md-raid1-support-for-bitmap-intent-logging.patch
md: raid1 support for bitmap intent logging
md-fix-bug-when-raid1-attempts-a-partial-reconstruct.patch
md: fix bug when raid1 attempts a partial reconstruct.
md-raid1-support-for-bitmap-intent-logging-fix.patch
md: initialise sync_blocks in raid1 resync
md-optimise-reconstruction-when-re-adding-a-recently-failed-drive.patch
md: optimise reconstruction when re-adding a recently failed drive.
md-fix-deadlock-due-to-md-thread-processing-delayed-requests.patch
md: fix deadlock due to md thread processing delayed requests.
md-allow-md-intent-bitmap-to-be-stored-near-the-superblock.patch
md: allow md intent bitmap to be stored near the superblock.
md-allow-md-to-update-multiple-superblocks-in-parallel.patch
md: allow md to update multiple superblocks in parallel.
detect-atomic-counter-underflows.patch
detect atomic counter underflows
post-halloween-doc.patch
post halloween doc
fuse-maintainers-kconfig-and-makefile-changes.patch
FUSE - MAINTAINERS, Kconfig and Makefile changes
fuse-core.patch
FUSE - core
fuse-device-functions.patch
FUSE - device functions
fuse-read-only-operations.patch
FUSE - read-only operations
fuse-read-write-operations.patch
FUSE - read-write operations
fuse-file-operations.patch
FUSE - file operations
fuse-mount-options.patch
FUSE - mount options
fuse-mount-options-fix.patch
fuse: fix busy inodes after unmount
fuse-mount-options-fix-fix.patch
FUSE: fix locking for background list
fuse-extended-attribute-operations.patch
FUSE - extended attribute operations
fuse-readpages-operation.patch
FUSE - readpages operation
fuse-nfs-export.patch
FUSE - NFS export
fuse-direct-i-o.patch
FUSE - direct I/O
fuse-transfer-readdir-data-through-device.patch
fuse: transfer readdir data through device
drivers-isdn-divert-isdn_divertc-make-5-functions-static.patch
drivers/isdn/divert/isdn_divert.c: make 5 functions static
drivers-isdn-capi-make-some-code-static.patch
drivers/isdn/capi/: make some code static
drivers-scsi-pas16c-make-code-static.patch
drivers/scsi/pas16.c: make code static
fix-pm_message_t-in-generic-code.patch
Fix pm_message_t in generic code
fix-u32-vs-pm_message_t-in-usb.patch
Fix u32 vs. pm_message_t in USB
more-pm_message_t-fixes.patch
more pm_message_t fixes
fix-u32-vs-pm_message_t-confusion-in-oss.patch
Fix u32 vs. pm_message_t confusion in OSS
fix-u32-vs-pm_message_t-confusion-in-pcmcia.patch
Fix u32 vs. pm_message_t confusion in PCMCIA
fix-u32-vs-pm_message_t-confusion-in-framebuffers.patch
Fix u32 vs. pm_message_t confusion in framebuffers
fix-u32-vs-pm_message_t-confusion-in-mmc.patch
Fix u32 vs. pm_message_t confusion in MMC
fix-u32-vs-pm_message_t-confusion-in-serials.patch
Fix u32 vs. pm_message_t confusion in serials
fix-u32-vs-pm_message_t-in-macintosh.patch
Fix u32 vs. pm_message_t in macintosh
fix-u32-vs-pm_message_t-confusion-in-agp.patch
Fix u32 vs. pm_message_t confusion in AGP
cyrix-eliminate-bad-section-references.patch
cyrix: eliminate bad section references
drivers-media-video-tvaudioc-make-some-variables-static.patch
drivers/media/video/tvaudio.c: make some variables static
drivers-isdn-sc-possible-cleanups.patch
drivers/isdn/sc/: possible cleanups
drivers-isdn-pcbit-possible-cleanups.patch
drivers/isdn/pcbit/: possible cleanups
drivers-isdn-i4l-possible-cleanups.patch
drivers/isdn/i4l/: possible cleanups
unexport-mca_find_device_by_slot.patch
unexport mca_find_device_by_slot
drivers-isdn-hardware-avm-misc-cleanups.patch
drivers/isdn/hardware/avm/: misc cleanups
drivers-isdn-act2000-capic-if-0-an-unused-function.patch
drivers/isdn/act2000/capi.c: #if 0 an unused function
tpm-fix-gcc-printk-warnings.patch
tpm: fix gcc printk warnings
x86-64-add-memcpy-memset-prototypes.patch
x86-64: add memcpy/memset prototypes
au1100fb-convert-to-c99-inits.patch
au1100fb: convert to C99 inits.
reiserfs-use-null-instead-of-0.patch
reiserfs: use NULL instead of 0
comments-on-locking-of-task-comm.patch
comments on locking of task->comm
riottyc-cleanups-and-warning-fix.patch
riotty.c cleanups and warning fix
fixup-a-comment-still-refering-to-verify_area.patch
fix up a comment still refering to verify_area
char-ds1620-use-msleep-instead-of-schedule_timeout.patch
char/ds1620: use msleep() instead of schedule_timeout()
char-tty_io-replace-schedule_timeout-with-msleep_interruptible.patch
char/tty_io: replace schedule_timeout() with msleep_interruptible()
kernel-timer-fix-msleep_interruptible-comment.patch
kernel/timer: fix msleep_interruptible() comment
ixj-compile-warning-cleanup.patch
ixj* - compile warning cleanup
spelling-cleanups-in-shrinker-code.patch
Spelling cleanups in shrinker code
init-do_mounts_initrdc-fix-sparse-warning.patch
init/do_mounts_initrd.c: fix sparse warning
arch-i386-kernel-trapsc-fix-sparse-warnings.patch
arch/i386/kernel/traps.c: fix sparse warnings
arch-i386-kernel-apmc-fix-sparse-warnings.patch
arch/i386/kernel/apm.c: fix sparse warnings
arch-i386-mm-faultc-fix-sparse-warnings.patch
arch/i386/mm/fault.c: fix sparse warnings
arch-i386-crypto-aesc-fix-sparse-warnings.patch
arch/i386/crypto/aes.c: fix sparse warnings
codingstyle-trivial-whitespace-fixups.patch
CodingStyle: trivial whitespace fixups
small-partitions-msdos-cleanups.patch
small partitions/msdos cleanups
remove-redundant-null-check-before-before-kfree-in.patch
remove redundant NULL check before before kfree() in kernel/sysctl.c
update-ross-biro-bouncing-email-address.patch
update Ross Biro bouncing email address
get-rid-of-redundant-null-checks-before-kfree-in-arch-i386.patch
get rid of redundant NULL checks before kfree() in arch/i386/
remove-redundant-null-checks-before-kfree-in-sound-and.patch
remove redundant NULL checks before kfree() in sound/ and avoid casting pointers about to be kfree()'ed
x86-geode-support-fixes.patch
x86: geode support fixes
drivers-scsi-initioc-cleanups.patch
drivers/scsi/initio.c: cleanups
dont-do-pointless-null-checks-and-casts-before-kfree.patch
selinux: kfree cleanup
drivers-char-isicomc-section-fixes.patch
drivers/char/isicom.c: section fixes
sound-oss-cleanups.patch
sound/oss/: cleanups
mm-mmapnommuc-several-unexports.patch
mm/{mmap,nommu}.c: several unexports
unexport-hugetlb_total_pages.patch
unexport hugetlb_total_pages
unexport-clear_page_dirty_for_io.patch
unexport clear_page_dirty_for_io
mm-filemapc-make-sync_page_range_nolock-static.patch
mm/filemap.c: make sync_page_range_nolock static
mm-filemapc-make-generic_file_direct_io-static.patch
mm/filemap.c: make generic_file_direct_IO static
Alle 13:41, gioved? 24 marzo 2005, Andrew Morton ha scritto:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.
>6.12-rc1-mm2/
> - Some fixes for the recent DRM problems.
Hi Andrew,
While I was OK with DRM up to 2.6.12-rc1-mm1, now I get this at startup, and
Xorg fails to enable DRI (attached, lspci and .config):
Unable to handle kernel paging request at virtual address 72ff64d7
printing eip:
e087eb44
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
Modules linked in: radeon drm sd_mod scsi_mod lp hotkey fan container button
ide_cd 8250_pnp parport_pc parport floppy pcspkr sk98lin yenta_socket
rsrc_nonstatic pcmcia_core ehci_hcd usbhid ohci_hcd snd_intel8x0m 8250_pci
8250 serial_core ohci1394 ieee1394 sis_agp agpgart vfat fat video thermal
processor ac battery snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss
snd_pcm snd_timer snd soundcore snd_page_alloc skge evdev
CPU: 0
EIP: 0060:[<e087eb44>] Not tainted VLI
EFLAGS: 00013286 (2.6.12-rc1-mm2)
EIP is at agp_find_bridge+0x0/0xffffc77f [agpgart]
eax: dff1d000 ebx: de228400 ecx: 00000000 edx: 000000d0
esi: dd860000 edi: de228450 ebp: e1a4bd90 esp: dd811f48
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 4698, threadinfo=dd810000 task=dfca3030)
Stack: e1a085fb dd860000 00000000 e1a4c240 e1a06ed0 dd860000 e1a4c240 dff1d000
dd860000 e1a071ce e1a4c240 c01abfaf e1a4bd90 dff1d000 e1a4c240 00000310
e1a03adf ffffffff 00000000 00000310 fffffffc e1a4e180 dd810000 dd810000
Call Trace:
[<e1a085fb>] drm_agp_init+0x3b/0xb0 [drm]
[<e1a06ed0>] drm_fill_in_dev+0xf0/0x1b0 [drm]
[<e1a071ce>] drm_get_dev+0x4e/0xc0 [drm]
[<c01abfaf>] kobject_get+0xf/0x20
[<e1a03adf>] drm_init+0x6f/0xb0 [drm]
[<c0130589>] sys_init_module+0x139/0x1e0
[<c0102fdb>] sysenter_past_esp+0x54/0x75
Code: 6e 66 69 67 5f 62 79 74 65 00 61 67 70 5f 70 75 74 5f 62 72 69 64 67 65
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 65 00 <c0> a7 87 e0 dc 94
cd de dc 94 cd de 00 00 00 00 00 00 00 00 00
--
Stefano Rivoir
I'm getting the following build error with 2.6.12-rc1-mm2:
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
drivers/built-in.o(.init.text+0x4323): In function `zft_init':
: undefined reference to `class_device_creat'
make: *** [.tmp_vmlinux1] Error 1
2.6.12-rc1-mm1 built and is running just fine. I used the
-rc1-mm1 .config, did make oldconfig, make bzImage. Here is
the .config:
[steven@spc1 linux-2.6.12-rc1-mm2]$ grep ^CONFIG .config
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CLEAR_PAGES=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-GX110"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_BASE_SMALL=0
CONFIG_X86_PC=y
CONFIG_MPENTIUMIII=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32000
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_AOE_PARTITIONS=16
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_TCPDIAG=y
CONFIG_XFRM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_FTAPE=y
CONFIG_ZFTAPE=y
CONFIG_ZFT_DFLT_BLK_SZ=10240
CONFIG_ZFT_COMPRESSOR=y
CONFIG_FT_NR_BUFFERS=3
CONFIG_FT_PROC_FS=y
CONFIG_FT_NORMAL_DEBUG=y
CONFIG_FT_STD_FDC=y
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_SELECT=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
CONFIG_REISERFS_FS=y
CONFIG_DNOTIFY=y
CONFIG_ISO9660_FS=y
CONFIG_FAT_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
Steven
Stefano Rivoir wrote:
> Alle 13:41, gioved? 24 marzo 2005, Andrew Morton ha scritto:
>
>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.
>>6.12-rc1-mm2/
>
>
>>- Some fixes for the recent DRM problems.
>
>
> Hi Andrew,
>
> While I was OK with DRM up to 2.6.12-rc1-mm1, now I get this at startup, and
> Xorg fails to enable DRI (attached, lspci and .config):
>
> Unable to handle kernel paging request at virtual address 72ff64d7
> printing eip:
> e087eb44
> *pde = 00000000
> Oops: 0002 [#1]
> PREEMPT
> Modules linked in: radeon drm sd_mod scsi_mod lp hotkey fan container button
> ide_cd 8250_pnp parport_pc parport floppy pcspkr sk98lin yenta_socket
> rsrc_nonstatic pcmcia_core ehci_hcd usbhid ohci_hcd snd_intel8x0m 8250_pci
> 8250 serial_core ohci1394 ieee1394 sis_agp agpgart vfat fat video thermal
> processor ac battery snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss
> snd_pcm snd_timer snd soundcore snd_page_alloc skge evdev
> CPU: 0
> EIP: 0060:[<e087eb44>] Not tainted VLI
> EFLAGS: 00013286 (2.6.12-rc1-mm2)
> EIP is at agp_find_bridge+0x0/0xffffc77f [agpgart]
> eax: dff1d000 ebx: de228400 ecx: 00000000 edx: 000000d0
> esi: dd860000 edi: de228450 ebp: e1a4bd90 esp: dd811f48
> ds: 007b es: 007b ss: 0068
> Process modprobe (pid: 4698, threadinfo=dd810000 task=dfca3030)
> Stack: e1a085fb dd860000 00000000 e1a4c240 e1a06ed0 dd860000 e1a4c240 dff1d000
> dd860000 e1a071ce e1a4c240 c01abfaf e1a4bd90 dff1d000 e1a4c240 00000310
> e1a03adf ffffffff 00000000 00000310 fffffffc e1a4e180 dd810000 dd810000
> Call Trace:
> [<e1a085fb>] drm_agp_init+0x3b/0xb0 [drm]
> [<e1a06ed0>] drm_fill_in_dev+0xf0/0x1b0 [drm]
> [<e1a071ce>] drm_get_dev+0x4e/0xc0 [drm]
> [<c01abfaf>] kobject_get+0xf/0x20
> [<e1a03adf>] drm_init+0x6f/0xb0 [drm]
> [<c0130589>] sys_init_module+0x139/0x1e0
> [<c0102fdb>] sysenter_past_esp+0x54/0x75
> Code: 6e 66 69 67 5f 62 79 74 65 00 61 67 70 5f 70 75 74 5f 62 72 69 64 67 65
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 65 00 <c0> a7 87 e0 dc 94
> cd de dc 94 cd de 00 00 00 00 00 00 00 00 00
I get a similar Oops at boot; I noticed this warning during compilation:
drivers/char/drm/drm_agpsupport.c: In function `drm_agp_init':
drivers/char/drm/drm_agpsupport.c:391: warning: implicit declaration of function `agp_find_bridge'
drivers/char/drm/drm_agpsupport.c:391: warning: assignment makes pointer from integer without a cast
I dont know what header to include/modify to make it go away.
DRM and AGP are compiled into the kernel (no modules).
--
Manuel Lauss
Stefano Rivoir a ?crit :
> Alle 13:41, gioved? 24 marzo 2005, Andrew Morton ha scritto:
>
>>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/2.
>>6.12-rc1-mm2/
>
>
>>- Some fixes for the recent DRM problems.
>
>
> Hi Andrew,
>
> While I was OK with DRM up to 2.6.12-rc1-mm1, now I get this at startup, and
> Xorg fails to enable DRI (attached, lspci and .config):
Same problem on my Radeon M6 LY here.
This seems to be due to agp_find_bridge not being exported anymore
in agp_backend.h. Dave might have forgotten it when reworking my patch.
Patch attached.
Brice
Signoff-by: Brice Goglin <[email protected]>
--- linux-mm/include/linux/agp_backend.h.old 2005-03-24
16:17:25.000000000 +0100
+++ linux-mm/include/linux/agp_backend.h 2005-03-24
16:10:25.000000000 +0100
@@ -100,6 +100,7 @@
extern int agp_bind_memory(struct agp_memory *, off_t);
extern int agp_unbind_memory(struct agp_memory *);
extern void agp_enable(struct agp_bridge_data *, u32);
+extern struct agp_bridge_data * (*agp_find_bridge)(struct pci_dev *);
extern struct agp_bridge_data *agp_backend_acquire(struct pci_dev *);
extern void agp_backend_release(struct agp_bridge_data *);
Alle 16:18, gioved? 24 marzo 2005, Brice Goglin ha scritto:
> Stefano Rivoir a ?crit :
> > Alle 13:41, gioved? 24 marzo 2005, Andrew Morton ha scritto:
> >>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/
> >>2. 6.12-rc1-mm2/
> >>
> >>
> >>- Some fixes for the recent DRM problems.
> >
> > Hi Andrew,
> >
> > While I was OK with DRM up to 2.6.12-rc1-mm1, now I get this at startup,
> > and Xorg fails to enable DRI (attached, lspci and .config):
> --- linux-mm/include/linux/agp_backend.h.old 2005-03-24
> 16:17:25.000000000 +0100
> +++ linux-mm/include/linux/agp_backend.h 2005-03-24
> 16:10:25.000000000 +0100
> @@ -100,6 +100,7 @@
> extern int agp_bind_memory(struct agp_memory *, off_t);
> extern int agp_unbind_memory(struct agp_memory *);
> extern void agp_enable(struct agp_bridge_data *, u32);
> +extern struct agp_bridge_data * (*agp_find_bridge)(struct pci_dev *);
> extern struct agp_bridge_data *agp_backend_acquire(struct pci_dev *);
> extern void agp_backend_release(struct agp_bridge_data *);
Right, that fixed it for me.
Thank you.
--
Stefano Rivoir
Signed-off by: Steven Cole <[email protected]>
--- linux-2.6.12-rc1-mm2/drivers/char/ftape/zftape/zftape-init.c.orig 2005-03-24 08:43:30.000000000 -0700
+++ linux-2.6.12-rc1-mm2/drivers/char/ftape/zftape/zftape-init.c 2005-03-24 08:43:56.000000000 -0700
@@ -331,7 +331,7 @@
zft_class = class_create(THIS_MODULE, "zft");
for (i = 0; i < 4; i++) {
- class_device_creat(zft_class, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i);
+ class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i),
S_IFCHR | S_IRUSR | S_IWUSR,
"qft%i", i);
On Thu, 2005-03-24 at 04:41 -0800, Andrew Morton wrote:
> -mm kernels now aggregate Linus's tree and 34 subsystem trees. Usually
> they are pulled 3-4 hours before the release of the -mm kernel.
>
Andrew,
Do you notify the subsystem maintainers ahead of time so that critical
fixes can be pushed to BK?
I am thinking of the recent ALSA example, where the emu10k1 driver was
b0rked in 2.6.12-mm1, but the fix had been in ALSA CVS for a week.
Lee
Stefano Rivoir <[email protected]> wrote:
>
> Alle 16:18, gioved? 24 marzo 2005, Brice Goglin ha scritto:
> > Stefano Rivoir a ?crit :
> > > Alle 13:41, gioved? 24 marzo 2005, Andrew Morton ha scritto:
> > >>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc1/
> > >>2. 6.12-rc1-mm2/
> > >>
> > >>
> > >>- Some fixes for the recent DRM problems.
> > >
> > > Hi Andrew,
> > >
> > > While I was OK with DRM up to 2.6.12-rc1-mm1, now I get this at startup,
> > > and Xorg fails to enable DRI (attached, lspci and .config):
>
> > --- linux-mm/include/linux/agp_backend.h.old 2005-03-24
> > 16:17:25.000000000 +0100
> > +++ linux-mm/include/linux/agp_backend.h 2005-03-24
> > 16:10:25.000000000 +0100
> > @@ -100,6 +100,7 @@
> > extern int agp_bind_memory(struct agp_memory *, off_t);
> > extern int agp_unbind_memory(struct agp_memory *);
> > extern void agp_enable(struct agp_bridge_data *, u32);
> > +extern struct agp_bridge_data * (*agp_find_bridge)(struct pci_dev *);
> > extern struct agp_bridge_data *agp_backend_acquire(struct pci_dev *);
> > extern void agp_backend_release(struct agp_bridge_data *);
>
> Right, that fixed it for me.
>
There were contradictory patches in flight and I stuck the latest drm tree
into rc1-mm2 at the last minute, alas. You should revert
agp-make-some-code-static.patch.
But I assume that fixing the compile warnings does not fix the oopses which
Stefano and Brice are seeing?
Lee Revell <[email protected]> wrote:
>
> On Thu, 2005-03-24 at 04:41 -0800, Andrew Morton wrote:
> > -mm kernels now aggregate Linus's tree and 34 subsystem trees. Usually
> > they are pulled 3-4 hours before the release of the -mm kernel.
> >
>
> Andrew,
>
> Do you notify the subsystem maintainers ahead of time so that critical
> fixes can be pushed to BK?
Occasionally I'll go out and ping people, but almost always the subsystem
guys know what the development cycle is, and they appropriately decide
which code should go in, and when.
> I am thinking of the recent ALSA example, where the emu10k1 driver was
> b0rked in 2.6.12-mm1, but the fix had been in ALSA CVS for a week.
>
We've been discussing how to get ALSA CVS into ALSA bk more promptly.
Andrew Morton a ?crit :
> Stefano Rivoir <[email protected]> wrote:
>>>--- linux-mm/include/linux/agp_backend.h.old 2005-03-24
>>>16:17:25.000000000 +0100
>>>+++ linux-mm/include/linux/agp_backend.h 2005-03-24
>>>16:10:25.000000000 +0100
>>>@@ -100,6 +100,7 @@
>>> extern int agp_bind_memory(struct agp_memory *, off_t);
>>> extern int agp_unbind_memory(struct agp_memory *);
>>> extern void agp_enable(struct agp_bridge_data *, u32);
>>>+extern struct agp_bridge_data * (*agp_find_bridge)(struct pci_dev *);
>>> extern struct agp_bridge_data *agp_backend_acquire(struct pci_dev *);
>>> extern void agp_backend_release(struct agp_bridge_data *);
>>
>>Right, that fixed it for me.
>>
>
>
> There were contradictory patches in flight and I stuck the latest drm tree
> into rc1-mm2 at the last minute, alas. You should revert
> agp-make-some-code-static.patch.
>
> But I assume that fixing the compile warnings does not fix the oopses which
> Stefano and Brice are seeing?
My patch does fix both the compile warnings and my oops on my Radeon laptop.
Brice
On Thu, Mar 24, 2005 at 08:55:13AM -0700, Steven Cole wrote:
> Steven Cole wrote:
> >I'm getting the following build error with 2.6.12-rc1-mm2:
> >
> > CC init/version.o
> > LD init/built-in.o
> > LD .tmp_vmlinux1
> >drivers/built-in.o(.init.text+0x4323): In function `zft_init':
> >: undefined reference to `class_device_creat'
> >make: *** [.tmp_vmlinux1] Error 1
> >
>
> I glanced at the code, and this little patch fixes the problem:
Ick, sorry, that was my fault. I've applied this patch to my trees,
thanks.
Hm, I wonder how I missed this, I did do a 'make allmodconfig' build to
try to catch this kind of stuff...
thanks,
greg k-h
Greg KH <[email protected]> wrote:
>
> > I glanced at the code, and this little patch fixes the problem:
>
> Ick, sorry, that was my fault. I've applied this patch to my trees,
> thanks.
>
> Hm, I wonder how I missed this, I did do a 'make allmodconfig' build to
> try to catch this kind of stuff...
allmodconfig doesn't catch BROKEN_ON_SMP code. I've been caught out by
that a few times.
Hi,
On Thursday, 24 of March 2005 21:17, Andrew Morton wrote:
> Lee Revell <[email protected]> wrote:
> >
> > On Thu, 2005-03-24 at 04:41 -0800, Andrew Morton wrote:
> > > -mm kernels now aggregate Linus's tree and 34 subsystem trees. Usually
> > > they are pulled 3-4 hours before the release of the -mm kernel.
> > >
> >
> > Andrew,
> >
> > Do you notify the subsystem maintainers ahead of time so that critical
> > fixes can be pushed to BK?
>
> Occasionally I'll go out and ping people, but almost always the subsystem
> guys know what the development cycle is, and they appropriately decide
> which code should go in, and when.
>
> > I am thinking of the recent ALSA example, where the emu10k1 driver was
> > b0rked in 2.6.12-mm1, but the fix had been in ALSA CVS for a week.
> >
>
> We've been discussing how to get ALSA CVS into ALSA bk more promptly.
BTW, on 2.6.12-rc1-mm2 I can't rmmod the snd_intel8x0 module (the process
goes into the D state immediately), which did not happen before. This is 100%
reproducible, on two different AMD64-based boxes, with different sound chips.
Greets,
Rafael
--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"
On Thursday, 24 of March 2005 23:31, Rafael J. Wysocki wrote:
> Hi,
>
> On Thursday, 24 of March 2005 21:17, Andrew Morton wrote:
> > Lee Revell <[email protected]> wrote:
> > >
> > > On Thu, 2005-03-24 at 04:41 -0800, Andrew Morton wrote:
> > > > -mm kernels now aggregate Linus's tree and 34 subsystem trees. Usually
> > > > they are pulled 3-4 hours before the release of the -mm kernel.
> > > >
> > >
> > > Andrew,
> > >
> > > Do you notify the subsystem maintainers ahead of time so that critical
> > > fixes can be pushed to BK?
> >
> > Occasionally I'll go out and ping people, but almost always the subsystem
> > guys know what the development cycle is, and they appropriately decide
> > which code should go in, and when.
> >
> > > I am thinking of the recent ALSA example, where the emu10k1 driver was
> > > b0rked in 2.6.12-mm1, but the fix had been in ALSA CVS for a week.
> > >
> >
> > We've been discussing how to get ALSA CVS into ALSA bk more promptly.
>
> BTW, on 2.6.12-rc1-mm2 I can't rmmod the snd_intel8x0 module (the process
> goes into the D state immediately), which did not happen before. This is 100%
> reproducible, on two different AMD64-based boxes, with different sound chips.
Er, sorry for the noise on alsa-devel. Actually, rmmod doesn't work for me at all
on x86-64 (on two different boxes).
Greets,
Rafael
--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-mm2
# Thu Mar 24 23:38:31 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CLEAR_PAGES=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODE is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hdb6"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_AOE_PARTITIONS=16
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_ISCSI_IF is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
# CONFIG_NET_CLS_IND is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# SuperIO subsystem support
#
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
CONFIG_FB_SOFT_CURSOR=m
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_RW_DETECT=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_PWC is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_GENESYS is not set
# CONFIG_USB_NET1080 is not set
# CONFIG_USB_PL2301 is not set
# CONFIG_USB_KC2190 is not set
#
# Intelligent USB Devices/Gadgets
#
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_ZAURUS is not set
CONFIG_USB_CDCETHER=y
#
# USB Network Adapters
#
# CONFIG_USB_AX8817X is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Page alloc debug is incompatible with Software Suspend on i386
#
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
Laurent Riffard <[email protected]> wrote:
>
> hello,
>
> Same kinds of problem here. It depends on the removed module. I mean:
> "rmmod loop" or "rmmod pcspkr" works. But "rmmod snd_ens1371" or "rmmod
> ohci1394" hangs.
>
> Sysrq-T when rmmoding snd_ens1371 :
>
> rmmod D C92EBE8C 0 8231 8159 (NOTLB)
> c92ebea0 00000082 00000003 c92ebe8c 00000000 5685fc00 000f4253 cd624530
> cd624658 cff60874 cff60844 c92ebebc c92ebef0 c02618c7 00000000
> cd624530
> c0113137 00000000 00000000 00000282 cd248c20 cd248c07 00000001
> cd624530
> Call Trace:
> [wait_for_completion+124/193] wait_for_completion+0x7c/0xc1
> [<c02618c7>] wait_for_completion+0x7c/0xc1
> [device_release_driver+52/116] device_release_driver+0x34/0x74
> [<c01f0ae3>] device_release_driver+0x34/0x74
> [__remove_driver+8/12] __remove_driver+0x8/0xc
> [<c01f0b2b>] __remove_driver+0x8/0xc
> [driver_for_each_device+50/87] driver_for_each_device+0x32/0x57
> [<c01f0bd8>] driver_for_each_device+0x32/0x57
> [driver_detach+17/19] driver_detach+0x11/0x13
> [<c01f0b40>] driver_detach+0x11/0x13
> [bus_remove_driver+76/130] bus_remove_driver+0x4c/0x82
> [<c01f05eb>] bus_remove_driver+0x4c/0x82
> [driver_unregister+14/23] driver_unregister+0xe/0x17
> [<c01f0cb2>] driver_unregister+0xe/0x17
> [pci_unregister_driver+14/23] pci_unregister_driver+0xe/0x17
> [<c019b242>] pci_unregister_driver+0xe/0x17
> [sys_delete_module+322/379] sys_delete_module+0x142/0x17b
> [<c0128356>] sys_delete_module+0x142/0x17b
It looks like we're getting stuck in the wait_for_completion() in the new
klist_remove().
--- fs/nfs/nfs4_fs.h 2005-03-25 11:40:51.000000000 +1200
+++ fs/nfs/nfs4_fs.h 2005-03-25 11:44:28.000000000 +1200
@@ -176,7 +176,6 @@
extern struct dentry_operations nfs4_dentry_operations;
extern struct inode_operations nfs4_dir_inode_operations;
-extern struct inode_operations nfs4_file_inode_operations;
/* inode.c */
extern ssize_t nfs4_getxattr(struct dentry *, const char *, void *, size_t);
On Thu, 24 Mar 2005, Andrew Morton wrote:
> Laurent Riffard <[email protected]> wrote:
> >
> > hello,
> >
> > Same kinds of problem here. It depends on the removed module. I mean:
> > "rmmod loop" or "rmmod pcspkr" works. But "rmmod snd_ens1371" or "rmmod
> > ohci1394" hangs.
> >
> > Sysrq-T when rmmoding snd_ens1371 :
<snip>
> It looks like we're getting stuck in the wait_for_completion() in the new
> klist_remove().
D'oh! It's getting hung while waiting to remove the current node from the
list (which it can't remove because it's being used). The patch below
should fix it.
Pat
===== drivers/base/dd.c 1.3 vs edited =====
--- 1.3/drivers/base/dd.c 2005-03-21 12:25:04 -08:00
+++ edited/drivers/base/dd.c 2005-03-24 16:55:21 -08:00
@@ -177,7 +177,7 @@
sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
sysfs_remove_link(&dev->kobj, "driver");
- klist_remove(&dev->knode_driver);
+ klist_del(&dev->knode_driver);
down(&dev->sem);
device_detach_shutdown(dev);
On Thursday 24 March 2005 23:21, Brice Goglin wrote:
> Andrew Morton a ?crit :
> > Stefano Rivoir <[email protected]> wrote:
> >>>--- linux-mm/include/linux/agp_backend.h.old
> >>>+++ linux-mm/include/linux/agp_backend.h
> >>>+extern struct agp_bridge_data * (*agp_find_bridge)(struct pci_dev *);
> >>Right, that fixed it for me.
> >
> > There were contradictory patches in flight and I stuck the latest drm
> > tree into rc1-mm2 at the last minute, alas. You should revert
> > agp-make-some-code-static.patch.
> >
> > But I assume that fixing the compile warnings does not fix the oopses
> > which Stefano and Brice are seeing?
>
> My patch does fix both the compile warnings and my oops on my Radeon
> laptop.
It also allows my machine to boot.
Alexey
...
drm_agp_init+0x30/0x8e
drm_fill_in_dev+0xe7/0x195
drm_get_dev+0x4a/0xba
kobject_get+0xf/0x13
do_initcalls+0x54/0xb0
init+0x0/0x100
init+0x0/0x100
kernel_thread_helper+0x0/0x0b
kernel_thread_helper+0x5/0x0b
...
<0>Kernel panic - not syncing: Attempted to kill init!
On Thu, Mar 24, 2005 at 04:41:14AM -0800, Andrew Morton wrote:
>...
> Chages since 2.6.12-rc1-mm1:
>...
> -revert-allow-oem-written-modules-to-make-calls-to-ia64-oem-sal-functions.patch
>
> Drop this - the modules are now in the kernel.
>...
As already discussed, there's still no module using this in the kernel.
The part of this patch that still applies is below.
<-- snip -->
These module exports have no GPL'ed callers.
Signed-off-by: Adrian Bunk <[email protected]>
--- linux-2.6.12-rc1-mm2-full/arch/ia64/kernel/sal.c.old 2005-03-25 01:31:22.000000000 +0100
+++ linux-2.6.12-rc1-mm2-full/arch/ia64/kernel/sal.c 2005-03-25 01:34:24.000000000 +0100
@@ -273,7 +273,6 @@
SAL_CALL(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, arg7);
return 0;
}
-EXPORT_SYMBOL(ia64_sal_oemcall);
int
ia64_sal_oemcall_nolock(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
@@ -286,17 +285,3 @@
arg7);
return 0;
}
-EXPORT_SYMBOL(ia64_sal_oemcall_nolock);
-
-int
-ia64_sal_oemcall_reentrant(struct ia64_sal_retval *isrvp, u64 oemfunc,
- u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5,
- u64 arg6, u64 arg7)
-{
- if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
- return -1;
- SAL_CALL_REENTRANT(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
- arg7);
- return 0;
-}
-EXPORT_SYMBOL(ia64_sal_oemcall_reentrant);
root@Monkey100:/sys/class/i2c-adapter# ls * -l
root@Monkey100:/sys# cat */*/*/*
ksymoops 2.4.9 on i686 2.6.12-rc1-mm2. Options used
-o /lib/modules/2.6.12-rc1-mm2 (specified)
-m /boot/System.map-2.6.12-rc1-mm2 (specified)
Unable to handle kernel paging request at virtual address 24fc1024
c0198448
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c0198448>] Not tainted VLI
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00210206 (2.6.12-rc1-mm2)
eax: 00000001 ebx: c039f820 ecx: 00000001 edx: 24fc1000
esi: e75b6cc4 edi: f7c015e4 ebp: e7b93e94 esp: e7b93e94
ds: 007b es: 007b ss: 0068
Stack: e7b93eb8 c0198644 f7c01694 00000000 f7c015e4 e7b93eb8 c039f820 e75b6cc4
f7c015e4 e7b93edc c0198790 f7c01694 f7c015e4 e712a000 f7c01694 e712a000
fffffff4 e7b93f10 e7b93ef8 c019884f e75b6cc4 e712a000 ffffffea e75b6cc4
Call Trace:
[<c010410f>] show_stack+0x7f/0xa0
[<c01042aa>] show_registers+0x15a/0x1c0
[<c01044ac>] die+0xfc/0x190
[<c011450b>] do_page_fault+0x31b/0x670
[<c0103cf3>] error_code+0x4f/0x54
[<c0198644>] sysfs_get_target_path+0x14/0x80
[<c0198790>] sysfs_getlink+0xe0/0x150
[<c019884f>] sysfs_follow_link+0x4f/0x60
[<c016b46f>] generic_readlink+0x2f/0x90
[<c01635b6>] sys_readlink+0x86/0x90
[<c0103249>] syscall_call+0x7/0xb
Code: 42 70 e8 a4 fc 19 00 e9 f3 fe ff ff 90 90 90 90 90 90 90 90 90
90 90 90 90 90 90 90 90 90 90 90 90 90 90 55 31 c0 89 e5 8b 55 08<8b>
52 24 40 85 d2 75 f8 c9 c3 8d b4 26 00 00 00 00 8d bc 27 00
>>EIP; c0198448 <object_depth+8/20> <=====
>>ebx; c039f820 <sysfs_rename_sem+0/c>
>>edx; 24fc1000 <phys_startup_32+24ec1000/c0000000>
>>esi; e75b6cc4 <pg0+270ebcc4/3fb33400>
>>edi; f7c015e4 <pg0+377365e4/3fb33400>
>>ebp; e7b93e94 <pg0+276c8e94/3fb33400>
>>esp; e7b93e94 <pg0+276c8e94/3fb33400>
Trace; c010410f <show_stack+7f/a0>
Trace; c01042aa <show_registers+15a/1c0>
Trace; c01044ac <die+fc/190>
Trace; c011450b <do_page_fault+31b/670>
Trace; c0103cf3 <error_code+4f/54>
Trace; c0198644 <sysfs_get_target_path+14/80>
Trace; c0198790 <sysfs_getlink+e0/150>
Trace; c019884f <sysfs_follow_link+4f/60>
Trace; c016b46f <generic_readlink+2f/90>
Trace; c01635b6 <sys_readlink+86/90>
Trace; c0103249 <syscall_call+7/b>
This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.
Code; c019841d <.text.lock.dir+d7/fa>
00000000 <_EIP>:
Code; c019841d <.text.lock.dir+d7/fa>
0: 42 inc %edx
Code; c019841e <.text.lock.dir+d8/fa>
1: 70 e8 jo ffffffeb <_EIP+0xffffffeb>
Code; c0198420 <.text.lock.dir+da/fa>
3: a4 movsb %ds:(%esi),%es:(%edi)
Code; c0198421 <.text.lock.dir+db/fa>
4: fc cld
Code; c0198422 <.text.lock.dir+dc/fa>
5: 19 00 sbb %eax,(%eax)
Code; c0198424 <.text.lock.dir+de/fa>
7: e9 f3 fe ff ff jmp fffffeff <_EIP+0xfffffeff>
Code; c0198429 <.text.lock.dir+e3/fa>
c: 90 nop
Code; c019842a <.text.lock.dir+e4/fa>
d: 90 nop
Code; c019842b <.text.lock.dir+e5/fa>
e: 90 nop
Code; c019842c <.text.lock.dir+e6/fa>
f: 90 nop
Code; c019842d <.text.lock.dir+e7/fa>
10: 90 nop
Code; c019842e <.text.lock.dir+e8/fa>
11: 90 nop
Code; c019842f <.text.lock.dir+e9/fa>
12: 90 nop
Code; c0198430 <.text.lock.dir+ea/fa>
13: 90 nop
Code; c0198431 <.text.lock.dir+eb/fa>
14: 90 nop
Code; c0198432 <.text.lock.dir+ec/fa>
15: 90 nop
Code; c0198433 <.text.lock.dir+ed/fa>
16: 90 nop
Code; c0198434 <.text.lock.dir+ee/fa>
17: 90 nop
Code; c0198435 <.text.lock.dir+ef/fa>
18: 90 nop
Code; c0198436 <.text.lock.dir+f0/fa>
19: 90 nop
Code; c0198437 <.text.lock.dir+f1/fa>
1a: 90 nop
Code; c0198438 <.text.lock.dir+f2/fa>
1b: 90 nop
Code; c0198439 <.text.lock.dir+f3/fa>
1c: 90 nop
Code; c019843a <.text.lock.dir+f4/fa>
1d: 90 nop
Code; c019843b <.text.lock.dir+f5/fa>
1e: 90 nop
Code; c019843c <.text.lock.dir+f6/fa>
1f: 90 nop
Code; c019843d <.text.lock.dir+f7/fa>
20: 90 nop
Code; c019843e <.text.lock.dir+f/60>
Trace; c01681de <__link_path_walk+8ce/ec0>
Trace; c016885f <link_path_walk+8f/190>
Trace; c0168c45 <path_lookup+95/170>
Trace; c01693ef <open_namei+7f/650>
Trace; c015823c <filp_open+3c/60>
Trace; c01586e8 <sys_open+48/d0>
Trace; c0103249 <syscall_call+7/b>
This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.
Code; c019841d <.text.lock.dir+d7/fa>
00000000 <_EIP>:
Code; c019841d <.text.lock.dir+d7/fa>
0: 42 inc %edx
Code; c019841e <.text.lock.dir+d8/fa>
1: 70 e8 jo ffffffeb <_EIP+0xffffffeb>
Code; c0198420 <.text.lock.dir+da/fa>
3: a4 movsb %ds:(%esi),%es:(%
----------------------------------------------
<1>Unable to handle kernel paging request at virtual address 36bc3024
c0198448
*pde = 00000000
Oops: 0000 [#6]
CPU: 0
EIP: 0060:[<c0198448>] Not tainted VLI
EFLAGS: 00210206 (2.6.12-rc1-mm2)
eax: 00000001 ebx: c039f820 ecx: 00000001 edx: 36bc3000
esi: e75b6cc4 edi: f7c015e4 ebp: e3423dc4 esp: e3423dc4
ds: 007b es: 007b ss: 0068
Stack: e3423de8 c0198644 f7c01694 00000000 f7c015e4 e3423de8 c039f820 e75b6cc4
f7c015e4 e3423e0c c0198790 f7c01694 f7c015e4 e02fe000 f7c01694 e02fe000
fffffff4 e3423f50 e3423e28 c019884f e75b6cc4 e02fe000 e3423e64 e3422000
Call Trace:
[<c010410f>] show_stack+0x7f/0xa0
[<c01042aa>] show_registers+0x15a/0x1c0
[<c01044ac>] die+0xfc/0x190
[<c011450b>] do_page_fault+0x31b/0x670
[<c0103cf3>] error_code+0x4f/0x54
[<c0198644>] sysfs_get_target_path+0x14/0x80
[<c0198790>] sysfs_getlink+0xe0/0x150
[<c019884f>] sysfs_follow_link+0x4f/0x60
[<c01681de>] __link_path_walk+0x8ce/0xec0
[<c016885f>] link_path_walk+0x8f/0x190
[<c0168c45>] path_lookup+0x95/0x170
[<c01693ef>] open_namei+0x7f/0x650
[<c015823c>] filp_open+0x3c/0x60
[<c01586e8>] sys_open+0x48/0xd0
[<c0103249>] syscall_call+0x7/0xb
Code: 42 70 e8 a4 fc 19 00 e9 f3 fe ff ff 90 90 90 90 90 90 90 90 90
90 90 90 90 90 90 90 90 90 90 90 90 90 90 55 31 c0 89 e5 8b 55 08<8b>
52 24 40 85 d2 75 f8 c9 c3 8d b4 26 00 00 00 00 8d bc 27 00
>>EIP; c0198448 <object_depth+8/20> <=====
>>ebx; c039f820 <sysfs_rename_sem+0/c>
>>edx; 36bc3000 <phys_startup_32+36ac3000/c0000000>
>>esi; e75b6cc4 <pg0+270ebcc4/3fb33400>
>>edi; f7c015e4 <pg0+377365e4/3fb33400>
>>ebp; e3423dc4 <pg0+22f58dc4/3fb33400>
>>esp; e3423dc4 <pg0+22f58dc4/3fb33400>
Trace; c010410f <show_stack+7f/a0>
Trace; c01042aa <show_registers+15a/1c0>
Trace; c01044ac <die+fc/190>
Trace; c011450b <do_page_fault+31b/670>
Trace; c0103cf3 <error_code+4f/54>
Trace; c0198644 <sysfs_get_target_path+14/80>
Trace; c0198790 <sysfs_getlink+e0/150>
Trace; c019884f <sysfs_follow_link+4f/60>
Trace; c01681de <__link_path_walk+8ce/ec0>
Trace; c016885f <link_path_walk+8f/190>
Trace; c0168c45 <path_lookup+95/170>
Trace; c01693ef <open_namei+7f/650>
Trace; c015823c <filp_open+3c/60>
Trace; c01586e8 <sys_open+48/d0>
Trace; c0103249 <syscall_call+7/b>
This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.
Code; c019841d <.text.lock.dir+d7/fa>
00000000 <_EIP>:
Code; c019841d <.text.lock.dir+d7/fa>
0: 42 inc %edx
Code; c019841e <.text.lock.dir+d8/fa>
1: 70 e8 jo ffffffeb <_EIP+0xffffffeb>
Code; c0198420 <.text.lock.dir+da/fa>
3: a4 movsb %ds:(%esi),%es:(%edi)
Code; c0198421 <.text.lock.dir+db/fa>
4: fc cld
Code; c0198422 <.text.lock.dir+dc/fa>
5: 19 00 sbb %eax,(%eax)
Code; c0198424 <.text.lock.dir+de/fa>
7: e9 f3 fe ff ff jmp fffffeff
<_EIP+0xfffftext.lock.dir+f1/fa>
1a: 90 nop
Code; c0198438 <.text.lock.dir+f2/fa>
1b: 90 nop
Code; c0198439 <.text.lock.dir+f3/fa>
1c: 90 nop
Code; c019843a <.text.lock.dir+f4/fa>
1d: 90 nop
Code; c019843b <.text.lock.dir+f5/fa>
1e: 90 nop
Code; c019843c <.text.lock.dir+f6/fa>
1f: 90 nop
Code; c019843d <.text.lock.dir+f7/fa>
20: 90 nop
Code; c019843e <.text.lock.dir+f8/fa>
21: 90 nop
Code; c019843f <.text.lock.dir+f9/fa>
22: 90 nop
Code; c0198440 <object_depth+0/20>
23: 55 push %ebp
Code; c0198441 <object_depth+1/20>
24: 31 c0 xor %eax,%eax
Code; c0198443 <object_depth+3/20>
26: 89 e5 mov %esp,%ebp
Code; c0198445 <object_depth+5/20>
28: 8b 55 08 mov 0x8(%ebp),%edx
This decode from eip onwards should be reliable
Code; c0198448 <object_depth+8/20>
00000000 <_EIP>:
Code; c0198448 <object_depth+8/20> <=====
0: 8b 52 24 mov 0x24(%edx),%edx <=====
Code; c019844b <object_depth+b/20>
3: 40 inc %eax
Code; c019844c <object_depth+c/20>
4: 85 d2 test %edx,%edx
Code; c019844e <object_depth+e/20>
6: 75 f8 jne 0 <_EIP>
Code; c0198450 <object_depth+10/20>
8: c9 leave
Code; c0198451 <object_depth+11/20>
9: c3 ret
Code; c0198452 <object_depth+12/20>
a: 8d b4 26 00 00 00 00 lea 0x0(%esi),%esi
Code; c0198459 <object_depth+19/20>
11: 8d .byte 0x8d
Code; c019845a <object_depth+1a/20>
12: bc .byte 0xbc
Code; c019845b <object_depth+1b/20>
13: 27 daa
Miles Lane <[email protected]> wrote:
>
> root@Monkey100:/sys/class/i2c-adapter# ls * -l
> root@Monkey100:/sys# cat */*/*/*
>
> ksymoops 2.4.9 on i686 2.6.12-rc1-mm2. Options used
> -o /lib/modules/2.6.12-rc1-mm2 (specified)
> -m /boot/System.map-2.6.12-rc1-mm2 (specified)
>
> Unable to handle kernel paging request at virtual address 24fc1024
> c0198448
> *pde = 00000000
> Oops: 0000 [#1]
> CPU: 0
> EIP: 0060:[<c0198448>] Not tainted VLI
I wonder why the EIP sometimes doesn't get decoded.
> Using defaults from ksymoops -t elf32-i386 -a i386
> EFLAGS: 00210206 (2.6.12-rc1-mm2)
> eax: 00000001 ebx: c039f820 ecx: 00000001 edx: 24fc1000
> esi: e75b6cc4 edi: f7c015e4 ebp: e7b93e94 esp: e7b93e94
> ds: 007b es: 007b ss: 0068
> Stack: e7b93eb8 c0198644 f7c01694 00000000 f7c015e4 e7b93eb8 c039f820 e75b6cc4
> f7c015e4 e7b93edc c0198790 f7c01694 f7c015e4 e712a000 f7c01694 e712a000
> fffffff4 e7b93f10 e7b93ef8 c019884f e75b6cc4 e712a000 ffffffea e75b6cc4
> Call Trace:
> [<c010410f>] show_stack+0x7f/0xa0
> [<c01042aa>] show_registers+0x15a/0x1c0
> [<c01044ac>] die+0xfc/0x190
> [<c011450b>] do_page_fault+0x31b/0x670
> [<c0103cf3>] error_code+0x4f/0x54
> [<c0198644>] sysfs_get_target_path+0x14/0x80
> [<c0198790>] sysfs_getlink+0xe0/0x150
> [<c019884f>] sysfs_follow_link+0x4f/0x60
> [<c016b46f>] generic_readlink+0x2f/0x90
> [<c01635b6>] sys_readlink+0x86/0x90
> [<c0103249>] syscall_call+0x7/0xb
> Code: 42 70 e8 a4 fc 19 00 e9 f3 fe ff ff 90 90 90 90 90 90 90 90 90
> 90 90 90 90 90 90 90 90 90 90 90 90 90 90 55 31 c0 89 e5 8b 55 08<8b>
> 52 24 40 85 d2 75 f8 c9 c3 8d b4 26 00 00 00 00 8d bc 27 00
>
>
> >>EIP; c0198448 <object_depth+8/20> <=====
I can't repeat it here. Are you able to narrow it down to a specific sysfs
file?
The .config might help.
On Thu, Mar 24, 2005 at 05:00:18PM -0800, Patrick Mochel wrote:
>
> On Thu, 24 Mar 2005, Andrew Morton wrote:
>
> > Laurent Riffard <[email protected]> wrote:
> > >
> > > hello,
> > >
> > > Same kinds of problem here. It depends on the removed module. I mean:
> > > "rmmod loop" or "rmmod pcspkr" works. But "rmmod snd_ens1371" or "rmmod
> > > ohci1394" hangs.
> > >
> > > Sysrq-T when rmmoding snd_ens1371 :
>
> <snip>
>
> > It looks like we're getting stuck in the wait_for_completion() in the new
> > klist_remove().
>
> D'oh! It's getting hung while waiting to remove the current node from the
> list (which it can't remove because it's being used). The patch below
> should fix it.
Thanks, I've added this to my bk trees.
greg k-h
On Thu, Mar 24, 2005 at 08:22:15PM -0800, Andrew Morton wrote:
> Miles Lane <[email protected]> wrote:
> > Unable to handle kernel paging request at virtual address 24fc1024
> > c0198448
> > *pde = 00000000
> > Oops: 0000 [#1]
> > CPU: 0
> > EIP: 0060:[<c0198448>] Not tainted VLI
>
> I wonder why the EIP sometimes doesn't get decoded.
>
> > Using defaults from ksymoops -t elf32-i386 -a i386
> > EFLAGS: 00210206 (2.6.12-rc1-mm2)
ksymoops seems to remove lines from the kernel output that it doesn't
like. I've seen this many times on ARM, and each time I see an oops
from a 2.6 kernel which has been ksymoopsed, I always ask the submitter
to send the original non-ksymoopsed version.
Users need to be re-educated _not_ to use ksymoops.
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
Russell King <[email protected]> wrote:
>
> On Thu, Mar 24, 2005 at 08:22:15PM -0800, Andrew Morton wrote:
> > Miles Lane <[email protected]> wrote:
> > > Unable to handle kernel paging request at virtual address 24fc1024
> > > c0198448
> > > *pde = 00000000
> > > Oops: 0000 [#1]
> > > CPU: 0
> > > EIP: 0060:[<c0198448>] Not tainted VLI
> >
> > I wonder why the EIP sometimes doesn't get decoded.
> >
> > > Using defaults from ksymoops -t elf32-i386 -a i386
> > > EFLAGS: 00210206 (2.6.12-rc1-mm2)
>
> ksymoops seems to remove lines from the kernel output that it doesn't
> like.
but. but. There used to be a symbol+0xN/0xM in the EIP: line. Are you
saying that ksymoops rubbed that out and stuck a hex number in there?
> I've seen this many times on ARM, and each time I see an oops
> from a 2.6 kernel which has been ksymoopsed, I always ask the submitter
> to send the original non-ksymoopsed version.
>
> Users need to be re-educated _not_ to use ksymoops.
I wonder if there's something clever we could do to the kallsymsised oops
output so that ksymoops would simply cease to recognise it.
On Thu, Mar 24, 2005 at 11:45:44PM -0800, Andrew Morton wrote:
> Russell King <[email protected]> wrote:
> > On Thu, Mar 24, 2005 at 08:22:15PM -0800, Andrew Morton wrote:
> > > Miles Lane <[email protected]> wrote:
> > > > Unable to handle kernel paging request at virtual address 24fc1024
> > > > c0198448
> > > > *pde = 00000000
> > > > Oops: 0000 [#1]
> > > > CPU: 0
> > > > EIP: 0060:[<c0198448>] Not tainted VLI
> > >
> > > I wonder why the EIP sometimes doesn't get decoded.
> > >
> > > > Using defaults from ksymoops -t elf32-i386 -a i386
> > > > EFLAGS: 00210206 (2.6.12-rc1-mm2)
> >
> > ksymoops seems to remove lines from the kernel output that it doesn't
> > like.
>
> but. but. There used to be a symbol+0xN/0xM in the EIP: line. Are you
> saying that ksymoops rubbed that out and stuck a hex number in there?
The kernel's x86 format is:
printk("EIP: %04x:[<%08lx>] CPU: %d\n",0xffff & regs->xcs,regs->eip, smp_processor_id());
print_symbol("EIP is at %s\n", regs->eip);
so what you have there is the first EIP: line. The "EIP is at
symbol+0xN/0xM" is produced by the print_symbol statement, which
ksymoops decided to omit from the output.
It can be clearly seen from the rest of the oops (the call trace)
that print_symbol definitely does produce output, so kallsyms hasn't
been disabled.
> I wonder if there's something clever we could do to the kallsymsised oops
> output so that ksymoops would simply cease to recognise it.
I have been wondering why we still mark the addresses with [< >]
even though we've decoded them ourselves. Maybe omitting these
would be sufficient in the kallsyms-decoded case?
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
On Fri, Mar 25, 2005 at 07:50:32AM +0000, Russell King wrote:
> On Thu, Mar 24, 2005 at 11:45:44PM -0800, Andrew Morton wrote:
> > Russell King <[email protected]> wrote:
> > > On Thu, Mar 24, 2005 at 08:22:15PM -0800, Andrew Morton wrote:
> > > > Miles Lane <[email protected]> wrote:
> > > > > Unable to handle kernel paging request at virtual address 24fc1024
> > > > > c0198448
> > > > > *pde = 00000000
> > > > > Oops: 0000 [#1]
> > > > > CPU: 0
> > > > > EIP: 0060:[<c0198448>] Not tainted VLI
> > > >
> > > > I wonder why the EIP sometimes doesn't get decoded.
> > > >
> > > > > Using defaults from ksymoops -t elf32-i386 -a i386
> > > > > EFLAGS: 00210206 (2.6.12-rc1-mm2)
> > >
> > > ksymoops seems to remove lines from the kernel output that it doesn't
> > > like.
> >
> > but. but. There used to be a symbol+0xN/0xM in the EIP: line. Are you
> > saying that ksymoops rubbed that out and stuck a hex number in there?
>
> The kernel's x86 format is:
>
> printk("EIP: %04x:[<%08lx>] CPU: %d\n",0xffff & regs->xcs,regs->eip, smp_processor_id());
> print_symbol("EIP is at %s\n", regs->eip);
Argh, wrong one, it's supposed to be:
print_modules();
printk("CPU: %d\nEIP: %04x:[<%08lx>] %s VLI\nEFLAGS: %08lx"
" (%s) \n",
smp_processor_id(), 0xffff & regs->xcs, regs->eip,
print_tainted(), regs->eflags, system_utsname.release);
print_symbol("EIP is at %s\n", regs->eip);
but the result is the same. Also note that the modules line is also
missing from the posted oops.
(Why does x86 duplicate the register dumping between process.c and
traps.c ?)
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
Ahem. In this case, I think it was operator error. I reproduced the
problem and have included the entire output of ksymoops below.
Andrew, this command causes the Oops for me:
root@Monkey100:/sys/class/i2c-adapter/i2c-1# ls
./ ../ device@
root@Monkey100:/sys/class/i2c-adapter/i2c-1# ls -l
Segmentation fault
root@Monkey100:/sys/class/i2c-adapter/i2c-1# dmesg|ksymoops -o
/lib/modules/2.6.12-rc1-mm2 -m /boot/System.map-2.6.12-rc1-mm2
ksymoops 2.4.9 on i686 2.6.12-rc1-mm2. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.12-rc1-mm2 (specified)
-m /boot/System.map-2.6.12-rc1-mm2 (specified)
Error (regular_file): read_ksyms stat /proc/ksyms failed
ksymoops: No such file or directory
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
[<c010414e>] dump_stack+0x1e/0x20
[<c01f0b12>] kref_get+0x42/0x50
[<c01f005b>] kobject_get+0x1b/0x30
[<c01986f1>] sysfs_getlink+0x41/0x150
[<c019884f>] sysfs_follow_link+0x4f/0x60
[<c016b46f>] generic_readlink+0x2f/0x90
[<c01635b6>] sys_readlink+0x86/0x90
[<c0103249>] syscall_call+0x7/0xb
[<c010414e>] dump_stack+0x1e/0x20
[<c01f0b12>] kref_get+0x42/0x50
[<c01f005b>] kobject_get+0x1b/0x30
[<c019874d>] sysfs_getlink+0x9d/0x150
[<c019884f>] sysfs_follow_link+0x4f/0x60
[<c016b46f>] generic_readlink+0x2f/0x90
[<c01635b6>] sys_readlink+0x86/0x90
[<c0103249>] syscall_call+0x7/0xb
Unable to handle kernel paging request at virtual address 00001000
c0198479
*pde = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c0198479>] Not tainted VLI
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00210246 (2.6.12-rc1-mm2)
eax: 00000000 ebx: 00000000 ecx: ffffffff edx: f7c0181c
esi: 00000001 edi: 00001000 ebp: e7519e94 esp: e7519e88
ds: 007b es: 007b ss: 0068
Stack: 00000002 e4fdea1c f7c0181c e7519eb8 c0198651 f7c0181c 00000020 f7c0181c
e7519eb8 c039f820 e4fdea1c f7c0181c e7519edc c0198790 f7c018cc f7c0181c
e46a3000 f7c018cc e46a3000 fffffff4 e7519f10 e7519ef8 c019884f e4fdea1c
Call Trace:
[<c010410f>] show_stack+0x7f/0xa0
[<c01042aa>] show_registers+0x15a/0x1c0
[<c01044ac>] die+0xfc/0x190
[<c011450b>] do_page_fault+0x31b/0x670
[<c0103cf3>] error_code+0x4f/0x54
[<c0198651>] sysfs_get_target_path+0x21/0x80
[<c0198790>] sysfs_getlink+0xe0/0x150
[<c019884f>] sysfs_follow_link+0x4f/0x60
[<c016b46f>] generic_readlink+0x2f/0x90
[<c01635b6>] sys_readlink+0x86/0x90
[<c0103249>] syscall_call+0x7/0xb
Code: 75 f8 c9 c3 8d b4 26 00 00 00 00 8d bc 27 00 00 00 00 55 89 e5
57 56 8b 55 08 be 01 00 00 00 53 31 db 8b 3a b9 ff ff ff ff 89 d8<f2>
ae f7 d1 49 8b 52 24 8d 74 31 01 85 d2 75 e7 5b 89 f0 5e 5f
>>EIP; c0198479 <object_path_length+19/30> <=====
>>ecx; ffffffff <__kernel_rt_sigreturn+1bbf/????>
>>edx; f7c0181c <pg0+3773581c/3fb32400>
>>ebp; e7519e94 <pg0+2704de94/3fb32400>
>>esp; e7519e88 <pg0+2704de88/3fb32400>
Trace; c010410f <show_stack+7f/a0>
Trace; c01042aa <show_registers+15a/1c0>
Trace; c01044ac <die+fc/190>
Trace; c011450b <do_page_fault+31b/670>
Trace; c0103cf3 <error_code+4f/54>
Trace; c0198651 <sysfs_get_target_path+21/80>
Trace; c0198790 <sysfs_getlink+e0/150>
Trace; c019884f <sysfs_follow_link+4f/60>
Trace; c016b46f <generic_readlink+2f/90>
Trace; c01635b6 <sys_readlink+86/90>
Trace; c0103249 <syscall_call+7/b>
This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.
Code; c019844e <object_depth+e/20>
00000000 <_EIP>:
Code; c019844e <object_depth+e/20>
0: 75 f8 jne fffffffa <_EIP+0xfffffffa>
Code; c0198450 <object_depth+10/20>
2: c9 leave
Code; c0198451 <object_depth+11/20>
3: c3 ret
Code; c0198452 <object_depth+12/20>
4: 8d b4 26 00 00 00 00 lea 0x0(%esi),%esi
Code; c0198459 <object_depth+19/20>
b: 8d bc 27 00 00 00 00 lea 0x0(%edi),%edi
Code; c0198460 <object_path_length+0/30>
12: 55 push %ebp
Code; c0198461 <object_path_length+1/30>
13: 89 e5 mov %esp,%ebp
Code; c0198463 <object_path_length+3/30>
15: 57 push %edi
Code; c0198464 <object_path_length+4/30>
16: 56 push %esi
Code; c0198465 <object_path_length+5/30>
17: 8b 55 08 mov 0x8(%ebp),%edx
Code; c0198468 <object_path_length+8/30>
1a: be 01 00 00 00 mov $0x1,%esi
Code; c019846d <object_path_length+d/30>
1f: 53 push %ebx
Code; c019846e <object_path_length+e/30>
20: 31 db xor %ebx,%ebx
Code; c0198470 <object_path_length+10/30>
22: 8b 3a mov (%edx),%edi
Code; c0198472 <object_path_length+12/30>
24: b9 ff ff ff ff mov $0xffffffff,%ecx
Code; c0198477 <object_path_length+17/30>
29: 89 d8 mov %ebx,%eax
This decode from eip onwards should be reliable
Code; c0198479 <object_path_length+19/30>
00000000 <_EIP>:
Code; c0198479 <object_path_length+19/30> <=====
0: f2 ae repnz scas %es:(%edi),%al <=====
Code; c019847b <object_path_length+1b/30>
2: f7 d1 not %ecx
Code; c019847d <object_path_length+1d/30>
4: 49 dec %ecx
Code; c019847e <object_path_length+1e/30>
5: 8b 52 24 mov 0x24(%edx),%edx
Code; c0198481 <object_path_length+21/30>
8: 8d 74 31 01 lea 0x1(%ecx,%esi,1),%esi
Code; c0198485 <object_path_length+25/30>
c: 85 d2 test %edx,%edx
Code; c0198487 <object_path_length+27/30>
e: 75 e7 jne fffffff7 <_EIP+0xfffffff7>
Code; c0198489 <object_path_length+29/30>
10: 5b pop %ebx
Code; c019848a <object_path_length+2a/30>
11: 89 f0 mov %esi,%eax
Code; c019848c <object_path_length+2c/30>
13: 5e pop %esi
Code; c019848d <object_path_length+2d/30>
14: 5f pop %edi
Le 25.03.2005 02:00, Patrick Mochel a ?crit :
> On Thu, 24 Mar 2005, Andrew Morton wrote:
>
>
>>Laurent Riffard <[email protected]> wrote:
>>
>>> hello,
>>>
>>> Same kinds of problem here. It depends on the removed module. I
>>> mean: "rmmod loop" or "rmmod pcspkr" works. But "rmmod
>>> snd_ens1371" or "rmmod ohci1394" hangs.
>>>
>>> Sysrq-T when rmmoding snd_ens1371 :
>
> <snip>
>
>> It looks like we're getting stuck in the wait_for_completion() in
>> the new klist_remove().
>
> D'oh! It's getting hung while waiting to remove the current node from
> the list (which it can't remove because it's being used). The patch
> below should fix it.
>
> Pat
>
>
> ===== drivers/base/dd.c 1.3 vs edited =====
> --- 1.3/drivers/base/dd.c 2005-03-21 12:25:04 -08:00
> +++ edited/drivers/base/dd.c 2005-03-24 16:55:21 -08:00
> @@ -177,7 +177,7 @@
>
> sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj));
> sysfs_remove_link(&dev->kobj, "driver");
> - klist_remove(&dev->knode_driver);
> + klist_del(&dev->knode_driver);
>
> down(&dev->sem);
> device_detach_shutdown(dev);
Ok, I can confirm this patch solved the problem.
Thanks for your help.
--
laurent
Miles Lane <[email protected]> wrote:
>
> Ahem. In this case, I think it was operator error. I reproduced the
> problem and have included the entire output of ksymoops below.
Please don't use ksymoops. 2.6 kernels decode oopses internally and
ksymoops actually removes a little info.
> Andrew, this command causes the Oops for me:
>
> root@Monkey100:/sys/class/i2c-adapter/i2c-1# ls
> ./ ../ device@
> root@Monkey100:/sys/class/i2c-adapter/i2c-1# ls -l
> Segmentation fault
What device is that, and which driver is handling it?
Hi,
> +x86_64-fix-config_preempt.patch
>
> x86_64-fix-config_preempt.patch
> x86_64: Fix CONFIG_PREEMPT
Has this one been stress-tested?
I've got the impression that things have become a lot worse.
I've been seeing things like these:
Mar 25 01:00:48 websrv2 REISERFS: panic (device dm-1): clm-6000: do_balance, fs generation has changed
Mar 25 01:00:48 websrv2
Mar 25 01:00:48 websrv2 ----------- [cut here ] --------- [please bite here ] ---------
Mar 25 01:00:48 websrv2 Kernel BUG at prints:362
Mar 25 01:00:48 websrv2 invalid operand: 0000 [1] PREEMPT
Mar 25 01:00:48 websrv2 CPU 0
Mar 25 01:00:48 websrv2 Modules linked in: iptable_nat ipt_MARK iptable_mangle ipt_LOG ipt_multiport ipt_owner ipt_mark ipt_state ipt_REJECT iptable_filter ip_tables twofish serpent blowfish ext3 jbd reiser4 sha256 aes dm_crypt ip_conntrack_irc ip_conntrack_ftp ip_conntrack via_rhine 8139too crc32
Mar 25 01:00:48 websrv2 Pid: 25172, comm: rm Not tainted 2.6.12-rc1-cs1
Mar 25 01:00:48 websrv2 RIP: 0010:[<ffffffff801cfe13>] <ffffffff801cfe13>{reiserfs_panic+211}
Mar 25 01:00:48 websrv2 RSP: 0018:ffff81001efe37b8 EFLAGS: 00010292
Mar 25 01:00:48 websrv2 RAX: 0000000000000059 RBX: ffffffff803fbcac RCX: 00000000c0000100
Mar 25 01:00:48 websrv2 RDX: 0000000000000000 RSI: ffff81007d0b31f0 RDI: 00000000ffffffff
Mar 25 01:00:48 websrv2 RBP: ffff81004f960060 R08: ffff81001efe2000 R09: 0000000000000002
Mar 25 01:00:48 websrv2 R10: 00000000ffffffff R11: ffffffff80340ef0 R12: ffff81007f850230
Mar 25 01:00:48 websrv2 R13: ffff81007f850000 R14: 0000000000000000 R15: ffff81004f9565d0
Mar 25 01:00:48 websrv2 FS: 00002aaaaaabaae0(0000) GS:ffffffff805be800(0000) knlGS:0000000055563dc0
Mar 25 01:00:48 websrv2 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Mar 25 01:00:48 websrv2 CR2: 00002aaaaaaff008 CR3: 000000001ebbd000 CR4: 00000000000006e0
Mar 25 01:00:48 websrv2 Process rm (pid: 25172, threadinfo ffff81001efe2000, task ffff81007d0b31f0)
Mar 25 01:00:48 websrv2 Stack: 0000003000000010 ffff81001efe38a8 ffff81001efe37d8 ffff81001c041530
Mar 25 01:00:48 websrv2 ffff81001efe39d8 ffffffff801d4e42 ffff81007e659a00 0000000000000063
Mar 25 01:00:48 websrv2 0000000000000063 0000000000000000
Mar 25 01:00:48 websrv2 Call Trace:<ffffffff801d4e42>{pathrelse_and_restore+66} <ffffffff8010efe6>{retint_kernel+46}
Mar 25 01:00:48 websrv2 <ffffffff801bb847>{do_balance+39} <ffffffff801bd315>{do_balance+6901}
Mar 25 01:00:48 websrv2 <ffffffff801cbd90>{unfix_nodes+128} <ffffffff801be15b>{do_balance+10555}
Mar 25 01:00:48 websrv2 <ffffffff801d7bf9>{reiserfs_cut_from_item+1673} <ffffffff801bfcfa>{reiserfs_unlink+362}
Mar 25 01:00:48 websrv2 <ffffffff801873ae>{vfs_unlink+462} <ffffffff801874f9>{sys_unlink+233}
Mar 25 01:00:48 websrv2 <ffffffff8018a268>{sys_getdents+232} <ffffffff8010f221>{error_exit+0}
Mar 25 01:00:48 websrv2 <ffffffff8010e906>{system_call+126}
Mar 25 01:00:48 websrv2
Mar 25 01:00:48 websrv2 Code: 0f 0b b8 c1 3f 80 ff ff ff ff 6a 01 4d 85 ed 48 c7 c2 40 ba
Mar 25 01:00:48 websrv2 RIP <ffffffff801cfe13>{reiserfs_panic+211} RSP <ffff81001efe37b8>
or
Mar 25 16:39:21 websrv2 VFS: brelse: Trying to free free buffer
Mar 25 16:39:21 websrv2 Badness in __brelse at fs/buffer.c:1295
Mar 25 16:39:21 websrv2
Mar 25 16:39:21 websrv2 Call Trace:<ffffffff8017787f>{__find_get_block+479} <ffffffff8017a175>{__getblk+37}
Mar 25 16:39:21 websrv2 <ffffffff801de3d5>{do_journal_end+2181} <ffffffff80147d70>{keventd_create_kthread+0}
Mar 25 16:39:21 websrv2 <ffffffff801cbf50>{reiserfs_sync_fs+64} <ffffffff8017c0b3>{sync_supers+211}
Mar 25 16:39:21 websrv2 <ffffffff8015a22a>{wb_kupdate+42} <ffffffff8015ae8f>{pdflush+399}
Mar 25 16:39:21 websrv2 <ffffffff8015a200>{wb_kupdate+0} <ffffffff80147d70>{keventd_create_kthread+0}
Mar 25 16:39:21 websrv2 <ffffffff8015ad00>{pdflush+0} <ffffffff80147d2d>{kthread+205}
Mar 25 16:39:21 websrv2 <ffffffff8010f3d7>{child_rip+8} <ffffffff80147d70>{keventd_create_kthread+0}
Mar 25 16:39:21 websrv2 <ffffffff80147c60>{kthread+0} <ffffffff8010f3cf>{child_rip+0}
Fortunately the kernel locked up and there was no data corruption.
I've got PREEMPT and PREEMPT_BKL enabled under UP.
I just took a look at the change and found this:
x86-64 does this (in entry.S):
bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
jnc retint_restore_args
movl $PREEMPT_ACTIVE,threadinfo_preempt_count(%rcx)
sti
call schedule
cli
GET_THREAD_INFO(%rcx)
movl $0,threadinfo_preempt_count(%rcx)
jmp exit_intr
while i386 does this:
testl $IF_MASK,EFLAGS(%esp) # interrupts off (exception path) ?
jz restore_all
call preempt_schedule_irq
jmp need_resched
preempt_schedule_irq is not an i386 specific function and seems to take
special care of BKL preemption and since reiserfs does use the BKL to do
certain things I think this actually might be the problem...?
I'm not saying that this fix is wrong (it is obviously the right fix)
but it causes another problem to show up.
Unfortunately I don't have a amd64 machine to play with, so can somebody
please check this?
Hi Andrew, Miles,
> > Andrew, this command causes the Oops for me:
> >
> > root@Monkey100:/sys/class/i2c-adapter/i2c-1# ls
> > ./ ../ device@
> > root@Monkey100:/sys/class/i2c-adapter/i2c-1# ls -l
> > Segmentation fault
>
> What device is that, and which driver is handling it?
If I am allowed a wild guess here... Isn't by any chance i2c-1 one the
the 3 i2c adapters exported by the nvidiafb driver, which we know isn't
playing nicely with the i2c core? To me, it is simply a different
expression of the same bug Miles hit some days ago when loading the
i2c-dev or eeprom modules [1].
Miles, do you have the same problem with i2c-0 and i2c-2, or only i2c-1?
Can you please confirm that with CONFIG_FB_NVIDIA_I2C unset, the oops
vanishes?
[1] http://archives.andrew.net.au/lm-sensors/msg29974.html
Thanks,
--
Jean Delvare
On Fri, 2005-03-25 at 07:38 +0000, Russell King wrote:
> Users need to be re-educated _not_ to use ksymoops.
>
How about changing the fscking docs to not tell users to use it?
Seems like lots of stuff in Documentation/ is stuck in 2.4 land. How
about purging it? Incorrect docs are worse than nothing.
Lee
On Fri, Mar 25, 2005 at 03:53:42PM -0500, Lee Revell wrote:
> On Fri, 2005-03-25 at 07:38 +0000, Russell King wrote:
> > Users need to be re-educated _not_ to use ksymoops.
>
> How about changing the fscking docs to not tell users to use it?
Would be useful. The "fscking" problem is that no one actually owns the
documents, so there's no central focus to keep them up to date.
Maybe we need a docfsck? 8)
I certainly don't have authority to tell x86 people not to use ksymoops.
Therefore, I think my suggested change (which up until recently I thought
was an ARM only problem) should be done by someone else.
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
On Fri, 2005-03-25 at 21:07 +0000, Russell King wrote:
> On Fri, Mar 25, 2005 at 03:53:42PM -0500, Lee Revell wrote:
> > On Fri, 2005-03-25 at 07:38 +0000, Russell King wrote:
> > > Users need to be re-educated _not_ to use ksymoops.
> >
> > How about changing the fscking docs to not tell users to use it?
>
> Would be useful. The "fscking" problem is that no one actually owns the
> documents, so there's no central focus to keep them up to date.
>
Are you serious? So Documentation/sound/alsa/* isn't maintained by the
ALSA maintainers?
Wow, this would explain why all Linux documentation is at least 2 years
out of date.
> Maybe we need a docfsck? 8)
>
> I certainly don't have authority to tell x86 people not to use ksymoops.
> Therefore, I think my suggested change (which up until recently I thought
> was an ARM only problem) should be done by someone else.
>
At least from my experience, ksymoops is useless on x86 for 2.6 kernels.
Here is a patch to finally bring oops-tracing.txt into the 2.6 era. :-P
Sugned-Off-By: Lee Revell <[email protected]>
Lee
--- Documentation/oops-tracing.txt~ 2005-03-17 20:34:06.000000000 -0500
+++ Documentation/oops-tracing.txt 2005-03-25 16:41:07.000000000 -0500
@@ -1,23 +1,22 @@
+NOTE: ksymoops is useless on 2.6. Please use the Oops in its original format
+(from dmesg, etc). Ignore any references in this or other docs to "decoding
+the Oops" or "running it through ksymoops". If you post an Oops fron 2.6 that
+has been run through ksymoops, people will just tell you to repost it.
+
Quick Summary
-------------
-Install ksymoops from
-ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops
-Read the ksymoops man page.
-ksymoops < the_oops.txt
-
-and send the output the maintainer of the kernel area that seems to be
-involved with the problem, not to the ksymoops maintainer. Don't worry
-too much about getting the wrong person. If you are unsure send it to
-the person responsible for the code relevant to what you were doing.
-If it occurs repeatably try and describe how to recreate it. Thats
-worth even more than the oops
+Find the Oops and send it to the maintainer of the kernel area that seems to be
+involved with the problem. Don't worry too much about getting the wrong person.
+If you are unsure send it to the person responsible for the code relevant to
+what you were doing. If it occurs repeatably try and describe how to recreate
+it. That's worth even more than the oops.
If you are totally stumped as to whom to send the report, send it to
[email protected]. Thanks for your help in making Linux as
stable as humanly possible.
-Where is the_oops.txt?
+Where is the Oops?
----------------------
Normally the Oops text is read from the kernel buffers by klogd and
@@ -43,15 +42,14 @@
them yourself. Search kernel archives for kmsgdump, lkcd and
oops+smram.
-No matter how you capture the log output, feed the resulting file to
-ksymoops along with /proc/ksyms and /proc/modules that applied at the
-time of the crash. /var/log/ksymoops can be useful to capture the
-latter, man ksymoops for details.
-
Full Information
----------------
+NOTE: the message from Linus below applies to 2.4 kernel. I have preserved it
+for historical reasons, and because some of the information in it still
+applies. Especially, please ignore any references to ksymoops.
+
From: Linus Torvalds <[email protected]>
How to track down an Oops.. [originally a mail to linux-kernel]
On Fri, Mar 25, 2005 at 04:45:32PM -0500, Lee Revell wrote:
> On Fri, 2005-03-25 at 21:07 +0000, Russell King wrote:
> > On Fri, Mar 25, 2005 at 03:53:42PM -0500, Lee Revell wrote:
> > > On Fri, 2005-03-25 at 07:38 +0000, Russell King wrote:
> > > > Users need to be re-educated _not_ to use ksymoops.
> > >
> > > How about changing the fscking docs to not tell users to use it?
> >
> > Would be useful. The "fscking" problem is that no one actually owns the
> > documents, so there's no central focus to keep them up to date.
> >
>
> Are you serious? So Documentation/sound/alsa/* isn't maintained by the
> ALSA maintainers?
Last I checked, Documentation/oops-tracking.txt wasn't under
Documentation/sound/alsa. It seems obvious to me, but maybe it isn't
obvious to others, as your message appears to suggest.
As far as the question of ALSA documentation being up to date, that's
one set of directories in the kernel tree I've _never_ looked at, so
can't comment. Sorry.
--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 Serial core
On Fri, 2005-03-25 at 21:52 +0000, Russell King wrote:
> On Fri, Mar 25, 2005 at 04:45:32PM -0500, Lee Revell wrote:
> > On Fri, 2005-03-25 at 21:07 +0000, Russell King wrote:
> > > On Fri, Mar 25, 2005 at 03:53:42PM -0500, Lee Revell wrote:
> > > > On Fri, 2005-03-25 at 07:38 +0000, Russell King wrote:
> > > > > Users need to be re-educated _not_ to use ksymoops.
> > > >
> > > > How about changing the fscking docs to not tell users to use it?
> > >
> > > Would be useful. The "fscking" problem is that no one actually owns the
> > > documents, so there's no central focus to keep them up to date.
> > >
> >
> > Are you serious? So Documentation/sound/alsa/* isn't maintained by the
> > ALSA maintainers?
>
> Last I checked, Documentation/oops-tracking.txt wasn't under
> Documentation/sound/alsa. It seems obvious to me, but maybe it isn't
> obvious to others, as your message appears to suggest.
>
No, I just misread your message as "none of the docs are maintained"
rather than "oops-tracking.txt is not maintained".
> As far as the question of ALSA documentation being up to date, that's
> one set of directories in the kernel tree I've _never_ looked at, so
> can't comment. Sorry.
>
The ALSA docs are in fact up to date.
Lee
On Fri, 25 Mar 2005 20:50:35 +0100, Jean Delvare <[email protected]> wrote:
> > > root@Monkey100:/sys/class/i2c-adapter/i2c-1# ls
> > > ./ ../ device@
> > > root@Monkey100:/sys/class/i2c-adapter/i2c-1# ls -l
> > > Segmentation fault
> >
> > What device is that, and which driver is handling it?
>
> If I am allowed a wild guess here... Isn't by any chance i2c-1 one the
> the 3 i2c adapters exported by the nvidiafb driver, which we know isn't
> playing nicely with the i2c core? To me, it is simply a different
> expression of the same bug Miles hit some days ago when loading the
> i2c-dev or eeprom modules [1].
You are exactly right. The /sys issues had to do with i2c stuff
associated the nvidiafb driver.
Miles
Hi,
> x86_64-fix-config_preempt.patch
> x86_64: Fix CONFIG_PREEMPT
This patch causes another bug to show up some lines below with
CONFIG_PREEMPT_BKL. schedule releases the BKL which it shouldn't do.
Call preempt_schedule_irq instead (like for i386). This seems to fix the
easily reproducible filesystem errors I've seen (with reiserfs, which
heavily relies on the BKL).
Signed-off-by: Christophe Saout <[email protected]>
--- linux-2.6.12-rc1-mm2.orig/arch/x86_64/kernel/entry.S 2005-03-24 17:32:22.000000000 +0100
+++ linux-2.6.12-rc1-mm2/arch/x86_64/kernel/entry.S 2005-03-26 23:40:30.000000000 +0100
@@ -517,12 +517,7 @@
jnc retint_restore_args
bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
jnc retint_restore_args
- movl $PREEMPT_ACTIVE,threadinfo_preempt_count(%rcx)
- sti
- call schedule
- cli
- GET_THREAD_INFO(%rcx)
- movl $0,threadinfo_preempt_count(%rcx)
+ call preempt_schedule_irq
jmp exit_intr
#endif
CFI_ENDPROC
On Fri, Mar 25, 2005 at 08:26:25PM +0100, Christophe Saout wrote:
> Fortunately the kernel locked up and there was no data corruption.
>
> I've got PREEMPT and PREEMPT_BKL enabled under UP.
>
> I just took a look at the change and found this:
>
> x86-64 does this (in entry.S):
>
> bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
> jnc retint_restore_args
> movl $PREEMPT_ACTIVE,threadinfo_preempt_count(%rcx)
> sti
> call schedule
> cli
> GET_THREAD_INFO(%rcx)
> movl $0,threadinfo_preempt_count(%rcx)
> jmp exit_intr
>
> while i386 does this:
>
> testl $IF_MASK,EFLAGS(%esp) # interrupts off (exception path) ?
> jz restore_all
> call preempt_schedule_irq
> jmp need_resched
>
> preempt_schedule_irq is not an i386 specific function and seems to take
> special care of BKL preemption and since reiserfs does use the BKL to do
> certain things I think this actually might be the problem...?
Hmm, preempt_schedule_irq is not in mainline as far as I can see.
My patches are always for mainline; i dont do a special
patch kit for -mm*
It looks like a unfortunate interaction with some other patches
in mm. Andrew, can you disable CONFIG_PREEMPT on x86-64 in
mm for now?
Just calling preempt_schedule_irq may also work,
but most likely the patch that introduces that function needs
careful reading if it does not require more support from architectures.
BTW I suspect it will break other archs too...
> Unfortunately I don't have a amd64 machine to play with, so can somebody
> please check this?
How did you generate the crash dumps above then?
-Andi
On Sun, Mar 27, 2005 at 01:19:06AM +0100, Christophe Saout wrote:
> Hi,
>
> > x86_64-fix-config_preempt.patch
> > x86_64: Fix CONFIG_PREEMPT
>
> This patch causes another bug to show up some lines below with
> CONFIG_PREEMPT_BKL. schedule releases the BKL which it shouldn't do.
>
> Call preempt_schedule_irq instead (like for i386). This seems to fix the
> easily reproducible filesystem errors I've seen (with reiserfs, which
> heavily relies on the BKL).
I would not apply this one for now. It needs checking if the
patch that requires this change does not require more changes.
-Andi
Am Sonntag, den 27.03.2005, 19:26 +0200 schrieb Andi Kleen:
> > preempt_schedule_irq is not an i386 specific function and seems to take
> > special care of BKL preemption and since reiserfs does use the BKL to do
> > certain things I think this actually might be the problem...?
>
> Hmm, preempt_schedule_irq is not in mainline as far as I can see.
> My patches are always for mainline; i dont do a special
> patch kit for -mm*
PREEMPT_BKL has been in mainline since 2.6.11-rc1, preempt_schedule_irq
made it in 2.6.11-rc3. Please look here:
http://linux.bkbits.net:8080/linux-2.6/search/?expr=preempt_schedule_irq&search=ChangeSet+comments
For i386 the first change was to switch to preempt_schedule in this code
path: http://linux.bkbits.net:8080/linux-2.6/[email protected]
preempt_schedule takes care of setting PREEMPT_ACTIVE and resetting it
afterwards, so I removed that from the assembler code.
Then preempt_schedule_irq has been introduced to move the sti/cli back
around the call to schedule:
http://linux.bkbits.net:8080/linux-2.6/[email protected]
So in the end the only thing that the patch I proposed was doing is to
*additionally* handle the PREEMPT_BKL case so that schedule doesn't
accidentally release the BKL semaphore when it shouldn't because we are
preempting and nobody explicitly called schedule.
Several other archs have done the same. No bug has shown up until the
recent -mm kernel where the execution of this code path actually became
possible (the "jc -> jnc" fix some lines above).
> It looks like a unfortunate interaction with some other patches
> in mm. Andrew, can you disable CONFIG_PREEMPT on x86-64 in
> mm for now?
These things are in 2.6.11 (except that they never got called because of
the wrong interrupt flag check in the IRQ handler).
> > Unfortunately I don't have a amd64 machine to play with, so can somebody
> > please check this?
>
> How did you generate the crash dumps above then?
Well, nobody minds if I play with a webserver in the middle of the
night, as long as it works during the day. Shoot me. :)
Both servers are running fine since I applied my patch last night.
Now that I looked into it I think that it's obviously the correct
solution.
On Sun, Mar 27, 2005 at 08:05:13PM +0200, Christophe Saout wrote:
> Am Sonntag, den 27.03.2005, 19:26 +0200 schrieb Andi Kleen:
>
> > > preempt_schedule_irq is not an i386 specific function and seems to take
> > > special care of BKL preemption and since reiserfs does use the BKL to do
> > > certain things I think this actually might be the problem...?
> >
> > Hmm, preempt_schedule_irq is not in mainline as far as I can see.
> > My patches are always for mainline; i dont do a special
> > patch kit for -mm*
>
> PREEMPT_BKL has been in mainline since 2.6.11-rc1, preempt_schedule_irq
> made it in 2.6.11-rc3. Please look here:
> http://linux.bkbits.net:8080/linux-2.6/search/?expr=preempt_schedule_irq&search=ChangeSet+comments
Hmm, true. I must have missed it with the last merge.
Looking at the changeset your simple patch is probably ok.
>
> Now that I looked into it I think that it's obviously the correct
> solution.
Agreed.
-Andi
"Rafael J. Wysocki" <[email protected]> wrote:
>
>
> BTW, on 2.6.12-rc1-mm2 I can't rmmod the snd_intel8x0 module (the process
> goes into the D state immediately), which did not happen before. This is 100%
> reproducible, on two different AMD64-based boxes, with different sound chips.
Is this bug stil present in 2.6.12-rc5-mm1 or 2.6.12-rc5?
Thanks.
On Thursday, 26 of May 2005 02:29, Andrew Morton wrote:
> "Rafael J. Wysocki" <[email protected]> wrote:
> >
> >
> > BTW, on 2.6.12-rc1-mm2 I can't rmmod the snd_intel8x0 module (the process
> > goes into the D state immediately), which did not happen before. This is 100%
> > reproducible, on two different AMD64-based boxes, with different sound chips.
>
> Is this bug stil present in 2.6.12-rc5-mm1 or 2.6.12-rc5?
It's gone. :-)
Rafael
--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"